Search NASA⌕ Search

SEARCH · Search NASA

Results for “higher harmonics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

An orbiting infrared interferometer to search for nonsolar planets

This paper proposes an orbiting infrared interferometer with its fringe null centered on a nearby star at a distance of say 10 parsecs. A large planet ('Jupiter') would have an angular separation from the star of about 0.5 arcsec. To have a fringe crest on the planet, a fringe period of 1.0 arcsec is needed and at 40 microns the required baseline is 8 m. Spinning the interferometer about the line of sight to the star results, even with pointing errors, in a relatively slowly varying but strongly suppressed stellar output and a more rapidly varying fringe-like planetary signal rich in higher harmonics. For pointing errors up to .050 arcsec the planet's fourth harmonic greatly exceeds that from the star, thereby relaxing interferometer pointing tolerances. Indeed, it appears that the limiting factor is zodiacal infrared background radiation and not the intense localized stellar flux which can effectively be eliminated by the fringe null of the spinning infrared interferometer.

Macphie, R. H.↗

Electrostatic waves in the Jovian magnetosphere

Observations by the plasma wave receivers on Voyagers 1 and 2 show that a wide variety of electrostatic waves are present within the Jovian magnetosphere and that the Jovian electrostatic waves are for the most part very similar to those observed in the terrestrial magnetosphere. Bands of emission near the upper hybrid resonance frequency in the dayside outer magnetosphere are detected between higher harmonics of the electron gyrofrequency. Inside of about 23 Jupiter radii, electron cyclotron harmonic emissions appear to be durable features of the inner Jovian magnetosphere and are extremely well confined to the Jovian magnetic equator. The cyclotron emissions extend from just above the local electron gyrofrequency to the upper hybrid resonance frequency.

Kurth, W. S.↗

Multicyclic control of a helicopter rotor considering the influence of vibration, loads, and control motion

Weighted multiple linear regression is used to establish a transfer function matrix relationship between higher harmonic control inputs and transducer vibration outputs for a controllable twist rotor. Data used in the regression were taken from the test of a KAMAN controllable twist rotor conducted in the Ames Research Center's 40- by 80-Foot Wind Tunnel in June 1977. Optimal controls to minimize fixed system vibrational levels are calculated using linear quadratic regulatory theory with a control deflection penalty included in the performance criteria. Control sensitivity to changes in control travel, forward speed, and lift and propulsive forces is examined. It is found that the linear transfer matrix is a strong function of forward speed and a weak function of lift and propulsive force. An open-loop strategy is proposed for systems with limited control travel.

Brown, T. J.↗

Electrical torques on the electrostatic gyro in the gyro relativity experiment

A comprehensive discussion and calculation of electrical torques on an electrostatic gyro as they relate to the gyroscope experiment to test general relativity is presented. Drift rates were computed for some typical state of the art rotors, including higher harmonics in the rotor shape. The effect of orbital averaging of gravity gradient forces, roll averaging of torques, and the effect of spin averaging on the effective shape of the rotor were considered. The electrical torques are reduced sufficiently in a low g environment to permit a measurement of the relativistic drifts predicted by general relativity.

Eby, P.↗

Multicyclic Controllable Twist Rotor Data Analysis

Rsults provide functional relationship between rotor performance, blade vibratory loads and dual control settings and indicate that multicyclic control produced significant reductions in blade flatwise bending moments and blade root actuator control loads. Higher harmonic terms of servo flap deflection were found to be most pronounced in flatwise bending moment, transmission vertical vibration and pitch link vibratory load equations. The existing test hardware represents a satisfactory configuration for demonstrating MCTR technology and defining a data base for additional wind tunnel testing.

Wei, F. S.↗

Helicopter theory

A comprehensive presentation is made of the engineering analysis methods used in the design, development and evaluation of helicopters. After an introduction covering the fundamentals of helicopter rotors, configuration and operation, rotary wing history, and the analytical notation used in the text, the following topics are discussed: (1) vertical flight, including momentum, blade element and vortex theories, induced power, vertical drag and ground effect; (2) forward flight, including in addition to momentum and vortex theory for this mode such phenomena as rotor flapping and its higher harmonics, tip loss and root cutout, compressibility and pitch-flap coupling; (3) hover and forward flight performance assessment; (4) helicopter rotor design; (5) rotary wing aerodynamics; (6) rotary wing structural dynamics, including flutter, flap-lag dynamics ground resonance and vibration and loads; (7) helicopter aeroelasticity; (8) stability and control (flying qualities); (9) stall; and (10) noise.

Johnson, W.↗

Screech suppression in supersonic jets

Jet screech from underexpanded sonic nozzles has been investigated experimentally. Multiple screech modes, or stages, are found to be present at some jet operating conditions. The fundamental screech tone of each mode attains a maximum amplitude at about 20 deg from the inlet axis, with higher harmonics exhibiting multiple lobes. The directivity of each harmonic is predicted quite well from a stationary array of acoustic monopoles, with phasing between consecutive monopoles determined by the shock cell spacing and eddy convection velocity. Large reduction of screech amplitude can be obtained from modifications to the nozzle exit, although the extent of this suppression is mode dependent.

Norum, T. D.↗

Coupled rotor/airframe vibration analysis

A coupled rotor/airframe vibration analysis developed as a design tool for predicting helicopter vibrations and a research tool to quantify the effects of structural properties, aerodynamic interactions, and vibration reduction devices on vehicle vibration levels is described. The analysis consists of a base program utilizing an impedance matching technique to represent the coupled rotor/airframe dynamics of the system supported by inputs from several external programs supplying sophisticated rotor and airframe aerodynamic and structural dynamic representation. The theoretical background, computer program capabilities and limited correlation results are presented in this report. Correlation results using scale model wind tunnel results show that the analysis can adequately predict trends of vibration variations with airspeed and higher harmonic control effects. Predictions of absolute values of vibration levels were found to be very sensitive to modal characteristics and results were not representative of measured values.

Sopher, R.↗

Why credible propeller noise measurements are possible in the acoustically untreated NASA Lewis 8 ft by 6 ft wind tunnel

An explanation is presented for the lack of acoustic reflections in noise studies of propfan models in the NASA-Lewis 8 x 6 ft wind tunnel, where trials were run at Mach numbers 0.5-0.85. The highly directional propeller noise, i.e., mainly in the plane of rotation, experiences a convective effect due to the high subsonic axial Mach number. Reflected sounds are carried downstream, out of range of the acoustic sensors in the tunnel. Furthermore, reflected noise is less audible, and therefore does not affect measurements near peak values. It is suggested that some data contamination may occur below Mach 0.6, and that measurements be performed on higher harmonics generated by low level reflected noise.

Dittmar, J. H.↗

Analysis of potential helicopter vibration reduction concepts

Results of analytical investigations to develop, understand, and evaluate potential helicopter vibration reduction concepts are presented in the following areas: identification of the fundamental sources of vibratory loads, blade design for low vibration, application of design optimization techniques, active higher harmonic control, blade appended aeromechanical devices, and the prediction of vibratory airloads. Primary sources of vibration are identified for a selected four-bladed articulated rotor operating in high speed level flight. The application of analytical design procedures and optimization techniques are shown to have the potential for establishing reduced vibration blade designs through variations in blade mass and stiffness distributions, and chordwise center-of-gravity location.

Landgrebe, A. J.↗

Partial rotor-to-stator rub demonstration

A rotor radial rub typically occurs in seals or at a blade tip or shroud when there is insufficient clearance, high vibration, or the shaft equilibrium position has been displaced to effectively limit the clearance (eccentricity). There are two extreme cases of radial rubs: full annular rub, when the rotor maintains continuous contact with the seal, etc.; and a partial rub, when the contact occurs during a fraction of the precession period. They both involve similar physical phenomena such as friction and modification of stiffness. In partial rubs with consecutive impacts, a significant average value of radial force is generated. This results in shaft average displacement in the direction opposite the rub location. The rotor rig demonstrates the characteristics of a partial lateral rub of varying severity and location. These characteristics include: (1) subharmonic components as a function of rotative speed/first balance resonance ratio and radial force; (2) higher harmonic content as a function of severity; (3) increased average rotor stiffness resulting in increased first balance resonance speed; and (4) change in overall orbital pattern as a sum of the unbalance response (1x) and subharmonic response (1nx).

Grissom, R.↗

Analysis of potential helicopter vibration reduction concepts

Several recent helicopter vibration reduction research programs are described. Results of studies of blade design parameters in rotor vibratory response and of an advanced blade design for reduced vibration are examined. An optimization approach to develop a general automated procedure for rotor blade design is described, and analytical results for an articulated rotor operating at a steady 160 kt flight condition are reported. The use of a self-adaptive controller to implement higher harmonic control in closed-loop fashion is addressed, and a computer simulation used to evaluate and compare the performance of alternative algorithms included in the generic active controller is discussed. Results are presented for steady level flight conditions, short-duration maneuvers, blade stresses and rotor performance, blade-appended aeroelastic devices, vibratory airloads, wake-induced blade airloads, and airloads from blade motions, the interaction of rotor and fuselage, and the interaction of rotor and empennage.

Landgrebe, A. J.↗

Dual control and prevention of the turn-off phenomenon in a class of mimo systems

A recently developed methodology of adaptive dual control based upon sensitivity functions is applied here to a multivariable input-output model. The plant has constant but unknown parameters. It represents a simplified linear version of the relationship between the vibration output and the higher harmonic control input for a helicopter. The cautious and the new dual controller are examined. In many instances, the cautious controller is seen to turn off. The new dual controller modifies the cautious control design by numerator and denominator correction terms which depend upon the sensitivity functions of the expected future cost and avoids the turn-off and burst phenomena. Monte Carlo simulations and statistical tests of significance indicate the superiority of the dual controller over the cautious and the heuristic certainity equivalence controllers.

Mookerjee, P.↗

Parametric analysis of a passive cyclic control device for helicopters

A parametric study of a passive device which provides a cyclic longitudinal control moment for a helicopter rotor was performed. It utilizes a rotor blade tip which is structurally decoupled from the blade inboard section. This rotor configuration is generally called the Free-Tip Rotor. A two dimensional numerical model was used to review the Constant Lift Tip Rotor, a predecessor of the current configuration, and then the same model was applied to the Passive Cyclic Control Device. The Constant Lift Tip was proven to have the ability to suppress the vibratory lift loading on the tip around the azimuth and to eliminate a significant negative lift peak on the advancing tip. The Passive Cyclic Control Device showed a once-per-revolution lift oscillation with a large amplitude, while minimizing the higher harmonic terms of the lift oscillation. This once-per-revolution oscillation results in the cyclic moment to trim the rotor longitudinally. A rotor performance analysis was performed by a three dimensional numerical model. It indicated that the vortices shed from the junction between the tip and the inboard section has a strong influence on the tip, and it may severely limit the tip performance. It was also shown that the Free-Tip allows the inboard section to have a larger twist, which results in a better performance.

Kumagai, H.↗

The nonlinear development of Gortler vortices in growing boundary layers

The development of Gortler vortices in boundary layers over curved walls in the nonlinear regime is investigated. The growth of the boundary layer makes a parallel flow analysis impossible except in the high wavenumber regime so in general the instability equations must be integrated numerically. Here the spanwise dependence of the basic flow is described using Fourier series expansion whilst the normal and streamwise variations are taken into account using finite differences. The calculations suggest that a given disturbance imposed at some position along the wall will eventually reach a local equilibrium state essentially independent of the initial conditions. In fact, the equilibrium state reached is qualitatively similar to the large amplitude high wave-number solution described asymptotically by Hall (1982). In general, it is found that the nonlinear interactions are dominated by a mean field type of interaction between the mean flow and the fundamental. Thus, even though higher harmonics of the fundamental are necessarily generated, most of the disturbance energy is confined to the mean flow correction and the fundamental. A major result of the calculations is finding that the downstream velocity field develops a strongly inflection character as the flow moves downstream. The latter result suggests that the major effect of Gortler vortices on boundary layers of practical importance might be to make them highly receptive to rapidly growing Rayleigh modes of instability.

Hall, Philip↗

Electron-cyclotron maser emission from the planets and the stars

Auroral kilometric radiation (AKR), Jupiter's decametric radio emission, microwave spike bursts from the Sun, and related bursts from flare stars and close binaries are discussed. Although all of these are produced by the same instability, the plasma conditions in the source regions differ; for the planets the ratio of the plasma frequency to the electron-cyclotron frequency is less than 1, whereas for the Sun and stars it is greater than or = 1. It is shown that as the ratio increases the frequency of the emissions moves to higher harmonics of the electron-cyclotron frequency and the mode changes from electromagnetic to electrostatic. Implications for AKR, microwave spike bursts, and related bursts from the stars are discussed.

Winglee, R. M.↗

Electron-cyclotron maser emission from the planets and the stars

Auroral kilometric radiation (AKR), Jupiter's decametric radio emission, microwave spike bursts from the sun, and related bursts from flare stars and close binaries, have all been attributed to the electron-cyclotron maser instability. Although all of these are produced by the same instability, the plasma conditions in the source regions differ; for the planets the ratio of the plasma frequency to the electron-cyclotron frequency, Omega(e), is less than about unity whereas for the sun and stars it is greater than about 1. It is shown that as this ratio increases, the frequency of the emissions moves to higher harmonics of Omega(e) and the mode changes from electromagnetic to electrostatic. Implications for AKR, microwave spike bursts and related bursts from the stars are discussed.

Winglee, R. M.↗

Recent Sikorsky R and D progress

The recent activities and progress in four specific areas of Sikorsky's research and development program are summarized. Since the beginning of the S-76 design in 1974, Sikorsky has been aggressively developing the technology for using composite materials in helicopter design. Four specific topics are covered: advanced cockpit/controller efforts, fly-by-wire controls on RSRA/X-Wing, vibration control via higher harmonic control, and main rotor aerodynamic improvements.

Source record↗