Search NASA⌕ Search

SEARCH · Search NASA

Results for “higher harmonics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Anomalous Absorption by the Two-Plasmon Decay Instability

Radiation-hydrodynamic simulations of directly driven fusion experiments at the Omega Laser Facility predict absorption accurately when targets are driven at low overlapped laser intensity. Discrepancies appear at increased intensity, however, with higher-than-expected laser absorption on target. Strong correlations with signatures of the two-plasmon decay (TPD) instability—including half-harmonic and hard-x-ray emission—indicate that TPD is responsible for this anomalous absorption. Scattered light data suggest that up to ≈ 30 % of the laser power reaching quarter-critical density can be absorbed locally when the TPD threshold is exceeded. A scaling of absorption versus TPD threshold parameter was empirically determined and validated using the laser–plasma simulation environment code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Heteroanionic Control of Exemplary Second-Harmonic Generation and Phase Matchability in 1D LiAsS 2– x Se x

The isostructural heteroanionic compounds β-LiAsS 2–x Se x (x = 0, 0.25, 1, 1.75, 2) show a positive correlation between selenium content and second-harmonic response and greatly outperform the industry standard AgGaSe 2 . These materials crystallize in the noncentrosymmetric space group Cc as one-dimensional $\frac{1}{∞}$ [AsQ 2 ] - (Q = S, Se, S/Se) chains consisting of corner-sharing AsQ3 trigonal pyramids with charge-balancing Li + atoms interspersed between the chains. LiAsS 2–x Se x melts congruently for 0 ≤ x ≤ 1.75, but when the Se content exceeds x = 1.75, crystallization is complicated by a phase transition. This behavior is attributed to the β- to α-phase transition present in LiAsSe 2 , which is observed in the Se-rich compositions. The band gap decreases with increasing Se content, starting at 1.63 eV (LiAsS 2 ) and reaching 1.06 eV (β-LiAsSe 2 ). Second-harmonic generation measurements as a function of wavelength on powder samples of β-LiAsS 2–x Se x show that these materials exhibit significantly higher nonlinearity than AgGaSe 2 (d 36 = 33 pm/V), reaching a maximum of 61.2 pm/V for LiAsS 2 . In comparison, single-crystal measurements for LiAsSSe yielded a d eff = 410 pm/V. LiAsSSe, LiAsS 0.25 Se 1.75 , and β-LiAsSe 2 show phase-matching behavior for incident wavelengths exceeding 3 μm. The laser-induced damage thresholds from two-photon absorption processes are on the same order of magnitude as AgGaSe 2 , with S-rich materials slightly outperforming AgGaSe 2 and Se-rich materials slightly underperforming AgGaSe 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transverse-momentum and event-shape dependence of D-meson flow harmonics in Pb–Pb collisions at s NN = 5.02 TeV

The elliptic and triangular flow coefficients v 2 and v 3 of prompt D 0 , D + , and D * + mesons were measured at midrapidity ( | y | < 0.8 ) in Pb–Pb collisions at the centre-of-mass energy per nucleon pair of s NN = 5.02 TeV with the ALICE detector at the LHC. The D mesons were reconstructed via their hadronic decays in the transverse momentum interval 1 < p T < 36 GeV / c in central (0–10%) and semi-central (30–50%) collisions. Compared to pions, protons, and J / ψ mesons, the average D-meson v n harmonics are compatible within uncertainties with a mass hierarchy for p T ≲ 3 GeV / c , and are similar to those of charged pions for higher p T . The coupling of the charm quark to the light quarks in the underlying medium is further investigated with the application of the event-shape engineering (ESE) technique to the D-meson v 2 and p T -differential yields. The D-meson v 2 is correlated with average bulk elliptic flow in both central and semi-central collisions. Within the current precision, the ratios of per-event D-meson yields in the ESE-selected and unbiased samples are found to be compatible with unity. All the measurements are found to be reasonably well described by theoretical calculations including the effects of charm-quark transport and the recombination of charm quarks with light quarks in a hydrodynamically expanding medium.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Coherent spin wave excitation with radio-frequency spin–orbit torque

Spin waves, collective perturbations of magnetic moments, are both fundamental probes for magnetic physics and promising candidates for energy-efficient signal processing and computation. Traditionally, coherent propagating spin waves have been generated by radio frequency (RF) inductive Oersted fields from current-carrying electrodes. An alternative mechanism, spin–orbit torque (SOT), offers more localized excitation through interfacial spin accumulation but has been mostly limited to DC to kHz frequencies. SOT driven by RF currents, with potentially enhanced pumping efficiency and unique spin dynamics, remains largely unexplored, especially in magnetic insulators. Here, we conduct a comprehensive theoretical and computational investigation into the generation of coherent spin waves via RF-SOT in the prototypical yttrium iron garnet. We characterize the excitation of forward volume, backward volume, and surface modes in both linear and nonlinear regimes, employing single and interdigitated electrode configurations. We reveal and explain several unique and surprising features of RF-SOT compared to inductive excitation, including higher efficiency, distinct mode selectivity, and directional symmetry, a ~ $3π/4$ phase offset, reduced anharmonic distortion in the nonlinear regime, and the absence of second harmonic generation. These insights position RF-SOT as a promising new mechanism for future magnonic and spintronic applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Helium-4 gravitational form factors: Exchange currents

We evaluate the leading exchange corrections to the helium-4 gravitational form factors (GFFs) to momenta of the order of the nucleon mass. We use both the K-harmonic method with simple pair nucleon potential, and a Jastrow trial function using the Argonne 𝑣 14 potential, to evaluate the helium-4 GFFs. The exchange current contributions include the pair interaction, plus the seagull and the pion exchange interactions, modulo the recoil corrections. To estimate the off-shellness of the pion nucleon coupling in this momenta range, we discuss the results using either the pseudoscalar (PS) or pseudovector (PV) pion-nucleon couplings. When the PV coupling is used, the pair diagram contribution is higher order in the nonrelativistic expansion. The results for the helium-4 A-GFF are comparable to those given by the impulse approximation, especially for the PS coupling using both the K-harmonic method and variational method. The exchange current contributions with the PS coupling for the charge form factor of helium-4, yield better agreement with the existing data over a broad range of momenta, especially when the Argonne 𝑣 14 potential including the D-wave admixture is used.

A ≤ 5↗

Enhanced harmonic generation accompanying Ferromagnetic resonance in thin permalloy elliptical disks

Throughout this work, large amplitude magnetization dynamics in elliptical permalloy nano-disks are studied via simulation of the Landau-Lifshitz equation. When the external magnetic field is applied in the plane of the disk two low-lying resonant modes exist. The higher frequency mode corresponds to the Kittel-like uniform ferromagnetic resonance mode and is consistent with previous experimental observations. The second mode with the lower frequency, termed the "cap mode", is localized near the two ends of the ellipse. At certain fields the ratio of the frequencies of these modes is equal to two or three and here one can efficiently generate the Kittel mode as the 2nd or 3rd harmonic of the "cap mode" when the magnitude of the input microwave field is of order 0.1 Oe, which can easily be achieved in practice. The nonlinear responses depend strongly on the equilibrium, field-dep-endent, behavior of the magnetization which is non-uniform and displays features not captured by the Stoner-Wohlfarth model for an ellipsoid.

36 MATERIALS SCIENCE↗

On extraction of twist-two Compton form factors from DVCS observables through harmonic analysis

We investigate the exercise of locally extracting the real and imaginary parts of the four twist-2 Compton form factors (CFFs) {$\mathcal{H,E,\tilde H,\tilde E}$} which arise in the deeply virtual Compton scattering (DVCS) process e + p → e + p + y. Neglecting dynamical higher-twist contributions, we find that there are a sufficient number of DVCS observables and degrees of freedom to extract all 8 leading quantities model-independently, exploiting the azimuthal dependence of the absolute cross sections across all possible beam and target polarizations at a common kinematical point in {Q, t,x b , y}. As an example, for typical JLab lab-frame kinematics, we simplify the reduced DVCS observables to their dominant terms, providing a sufficient number of equations for local determination of the twist-2 CFFs. We demonstrate the feasibility using harmonic fitting to both cross sections and beam spin asymmetries with both real and pseudo-data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A predictive strain-gradient model with no undetermined constants or length scales

A general meso–scale (GM) crystal plasticity (CP) model was developed that accounts for lower-order (strain hardening) and higher-order (internal stress) effects of geometrically necessary dislocations (GNDs). It is predictive: no arbitrary parameters or length scales were invoked and no ad hoc numerical techniques were employed. It uses general stress field equations for GND content and a novel harmonization technique to enforce consistency of elastic long-range singular defect fields with applied elastic-plastic fields. The model facilitates implementation in commercial finite element programs without requiring special elements, special boundary conditions, or access to element shape functions. GM simulations confirmed, with improved accuracy, previously published predictions of the Hall-Petch effect, Bauschinger effect, and anelasticity. Previously unpredicted phenomena were also predicted: anelasticity and hysteresis for single Ta crystals and strain-hardening stagnation. The internal stresses (higher-order effect) dominate at large length scales, while at small length scales, the GND density hardening (lower-order effect) dominates. As a result, GM predicts that strain heterogeneity and consequent GND internal stresses are important factors in anelasticity.

36 MATERIALS SCIENCE↗

Toroidal modeling of energetic passing particle drift kinetic effects on tearing mode stability

Abstract Drift kinetic effects of the neutral beam injection induced passing energetic particles (EPs) on the linear stability of the n = 1 tearing mode (TM) (with the dominant poloidal harmonic of m = 2) are numerically investigated utilizing the MARS-K code (Liu et al 2008 Phys. Plasmas 15 112503), in a tokamak plasma with finite equilibrium pressure and anisotropic thermal transport. In the low plasma pressure regime, it is found that co- (counter-) passing EPs stabilize (destabilize) the TM, agreeing with previous studies. However, as the plasma pressure increases beyond a critical value, it is found that co-passing EPs also destabilize the mode. An in-depth analysis reveals that the net effect of co-passing EPs is a result of competition between the stabilizing contribution from the non-adiabatic drift kinetic terms and the destabilizing contribution associated with adiabatic terms, with the latter becoming more dominant at higher equilibrium pressure. Non-perturbative magnetohydrodynamic-kinetic hybrid modeling also finds that co- and counter-passing EPs modify the TM eigenfunction differently, with the counter-passing EPs enhancing the sideband harmonics. Furthermore, effects of the plasma resistivity and toroidal rotation, as well as that of the equilibrium distribution of EPs in the particle pitch angle space, are also investigated, showing asymmetric results on the TM stability between the co- and counter-passing EPs. The first order finite orbit width correction is found to be stabilizing with co-passing EPs and destabilizing with counter-passing particles. Finally, drift resonances between passing EPs and the TM induce finite frequency to the mode and generate finite net torques inside the plasma, due to the neoclassical toroidal viscosity and the Reynolds stress associated with 3D perturbations.

Physics↗

Amplitudes, supersymmetric black hole scattering at $\mathcal{O}\left({G}^5\right)$, and loop integration

We compute the potential-graviton contribution to the scattering amplitude, the radial action, and the scattering angle of two extremal black holes in $\mathcal{N}$ = 8 supergravity at the fifth post-Minkowskian order and to next-to-leading order in a large mass expansion (first self-force order). Properties of classical unitarity cuts allow us to focus on the integration-by-parts reduction of planar integrals, while nonplanar integrals at this order are obtained from the planar ones by straightforward manipulations. We present the solution to the differential equations for all master integrals necessary to evaluate the classical scattering amplitudes of massive scalar particles at this order in all gravitational theories, in particular in $\mathcal{N}$ = 8 supergravity, and in general relativity. Despite the appearance of higher-weight generalized polylogarithms and elliptic functions in the solution to the differential equation for master integrals, the final supergravity answer is remarkably simple and contains only (harmonic) polylogarithmic functions up to weight 2. The systematic analysis of elliptic integrals discussed here, as well as the particular organization of boundary integrals in $\mathcal{N}$ = 8 observables are independent of supersymmetry and may have wider applications, including to aspects of collider physics.

Black Holes↗

Physics-inspired spatiotemporal-graph AI ensemble for the detection of higher order wave mode signals of spinning binary black hole mergers

We present a new class of AI models for the detection of quasi-circular, spinning, non-precessing binary black hole mergers whose waveforms include the higher order gravitational wave modes ($\ell$, |m|) = {(2,2), (2,1), (3,3), (3,2), (4,4)}, and mode mixing effects in the $\ell$ = 3, |m| = 2 harmonics. These AI models combine hybrid dilated convolution neural networks to accurately model both short- and long-range temporal sequential information of gravitational waves; and graph neural networks to capture spatial correlations among gravitational wave observatories to consistently describe and identify the presence of a signal in a three detector network encompassing the Advanced LIGO and Virgo detectors. We first trained these spatiotemporal-graph AI models using synthetic noise, using 1.2 million modeled waveforms to densely sample this signal manifold, within 1.7 h using 256 NVIDIA A100 GPUs in the Polaris supercomputer at the Argonne Leadership Computing Facility. This distributed training approach exhibited optimal classification performance, and strong scaling up to 512 NVIDIA A100 GPUs. With these AI ensembles we processed data from a three detector network, and found that an ensemble of 4 AI models achieves state-of-the-art performance for signal detection, and reports two misclassifications for every decade of searched data. We distributed AI inference over 128 GPUs in the Polaris supercomputer and 128 nodes in the Theta supercomputer, and completed the processing of a decade of gravitational wave data from a three detector network within 3.5 h. Finally, we fine-tuned these AI ensembles to process the entire month of February 2020, which is part of the O3b LIGO/Virgo observation run, and found 6 gravitational waves, concurrently identified in Advanced LIGO and Advanced Virgo data, and zero false positives. This analysis was completed in one hour using one NVIDIA A100 GPU.

79 ASTRONOMY AND ASTROPHYSICS↗

Booster cavity damper redesign for PIP-II

A new Higher Order Mode (HOM) damper was designed and is undergoing testing for the Booster accelerator cavity at Fermilab. In anticipation of the PIP-II upgrade, it was discovered that the higher intensity of PIP-II may cause beam instability due to an excited mode at 106 MHz. This unfortunately corresponds with the cavity’s 2nd order harmonic mode, which will sweep from 86-105.7 MHz. The new damper is a modification of an existing damper that was designed to reduce an existing static HOM at 83 MHz, with the new design intending to cover the 2nd order HOM as well. The existing damper uses an inductive coupling loop to extract RF energy from the cavity which then goes through a filter in order to reflect the fundamental frequency back into the cavity while passing HOMs to a dump load. The new damper intends to replace the filter portion of the system with a wider band variant while also changing the topology from a coaxial cable loop filter to a componentized PCB-based design. Primary design challenges include bandwidth coverage, impedance matching of the various modes, long term thermal and mechanical stability, radiation hardness, and high voltage handling. Initial designs achieved the desired damping but were found to quickly succumb to destructive arcing due to the voltages present. More finalized designs intend to address this problem through circuit design modifications as well as the use of hardier components.

Pieper, Dustin [Fermilab]↗

Extraordinary phase transition revealed in a van der Waals antiferromagnet

While the surface-bulk correspondence has been ubiquitously shown in topological phases, the relationship between surface and bulk in Landau-like phases is much less explored. Theoretical investigations since 1970s for semi-infinite systems have predicted the possibility of the surface order emerging at a higher temperature than the bulk, clearly illustrating a counterintuitive situation and greatly enriching phase transitions. But experimental realizations of this prediction remain missing. Here, we demonstrate the higher-temperature surface and lower-temperature bulk phase transitions in CrSBr, a van der Waals (vdW) layered antiferromagnet. We leverage the surface sensitivity of electric dipole second harmonic generation (SHG) to resolve surface magnetism, the bulk nature of electric quadrupole SHG to probe bulk spin correlations, and their interference to capture the two magnetic domain states. Our density functional theory calculations show the suppression of ferromagnetic-antiferromagnetic competition at the surface is responsible for this enhanced surface magnetism. Our results not only show counterintuitive, richer phase transitions in vdW magnets, but also provide viable ways to enhance magnetism in their 2D form.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gaussian approximation potentials for accurate thermal properties of two-dimensional materials

Two-dimensional materials (2DMs) continue to attract a lot of attention, particularly for their extreme flexibility and superior thermal properties. Molecular dynamics simulations are among the most powerful methods for computing these properties, but their reliability depends on the accuracy of interatomic interactions. While first principles approaches provide the most accurate description of interatomic forces, they are computationally expensive. In contrast, classical force fields are computationally efficient, but have limited accuracy in interatomic force description. Machine learning interatomic potentials, such as Gaussian Approximation Potentials, trained on density functional theory (DFT) calculations offer a compromise by providing both accurate estimation and computational efficiency. Here, in this work, we present a systematic procedure to develop Gaussian approximation potentials for selected 2DMs, graphene, buckled silicene, and h-XN (X = B, Al, and Ga, as binary compounds) structures. We validate our approach through calculations that require various levels of accuracy in interatomic interactions. The calculated phonon dispersion curves and lattice thermal conductivity, obtained through harmonic and anharmonic force constants (including fourth order) are in excellent agreement with DFT results. HIPHIVE calculations, in which the generated GAP potentials were used to compute higher-order force constants instead of DFT, demonstrated the first-principles level accuracy of the potentials for interatomic force description. Molecular dynamics simulations based on phonon density of states calculations, which agree closely with DFT-based calculations, also show the success of the generated potentials in high-temperature simulations.

2D Materials↗

Booster Cavity Damper Redesign for PIP-II

A new Higher Order Mode (HOM) damper was designed and tested for the Booster accelerator cavity at Fermilab. In anticipation of the PIP-II upgrade, it was discovered that the higher beam intensity of PIP-II may cause beam instability due to an excited mode at 106 MHz. This unfortunately corresponds with the cavity s 2nd order harmonic mode, which will sweep from 86-105.7 MHz. The new damper is a modification of an existing damper that was designed to reduce an existing static HOM at 83 MHz, with the new design intending to cover the 2nd order HOM as well. The existing damper uses an inductive coupling loop to extract RF energy from the cavity which then goes through a filter in order to reflect the fundamental frequency back into the cavity while passing HOMs to a dump load. The new damper intends to replace the filter portion of the system with a wider band variant while also changing the topology from a coaxial cable loop filter to a componentized PCB-based design. Primary design challenges include bandwidth coverage, impedance matching of the various modes, long term thermal and mechanical stability, radiation hardness, and high voltage handling. Initial designs achieved the desired damping but were found to quickly succumb to destructive arcing due to the voltages present. More finalized designs intend to address this problem through circuit design modifications as well as the use of hardier components.

Pieper, Dustin [Fermilab]↗

Chapter 7.1: Microalgae

Microalgae is a unique biomass resource that does not need to compete for land and water with other biomass feedstocks because it can be cultivated on low-quality unencumbered land using noncompetitive water types including saline and wastewater. It is included as a complementary resource alongside other biomass feedstocks reported in this study, albeit at higher biomass production costs reflective of more capital-intensive farming operations than typical for terrestrial biomass. Higher biomass costs can be offset by the potential to produce value-added coproducts unique to compositional constituents of microalgae. Relative to BT16, this chapter reflects the latest analysis from the 2022 Algae Harmonization Update, which uses the latest parameterized and high-performing saline algal strain, second-generation carbon capture of point-source waste CO2 and high-pressure pipeline transport resolved to specific point-source types, saline water sourcing up to 40,000 mg/L total dissolved solids for source and makeup water salinity, blowdown water treatment and recycle, and brine disposal handling. National-scale algal biomass availability potential was calculated at 152 million tons/yr ash-free dry weight (AFDW) (191 million tons/yr dry weight) at an average biomass productivity of 26.2 g/m2 -day AFDW (about 50 tons/acre/yr dry weight).1 The algal biomass was cultivated on 3.9 million acres of multi-criteria screened and potentially available land for CONUS and fixed 268 million tons of waste CO2 based on biomass uptake. The algae biomass can be produced at an average MBSP of $674/ton AFDW ($536/ton dry weight) in 2020 dollars,2 corresponding to a total energy potential of 3.3 quads/yr at an average MBSP of $31.2/MMBtu (higher-heating-value [HHV] basis).

algae↗

Machine learning approach to trapped many-fermion systems

For this work, we apply a variational ansatz based on neural networks to the problem of spin-$^1_2$ fermions in a harmonic trap interacting through a short distance potential. We showed that standard machine learning techniques lead to a quick convergence to the ground state, especially in weakly coupled cases. Higher couplings can be handled efficiently by increasing the strength of interactions during “training”.

1-dimensional systems↗

OC6 Phase III: Validation of Wind Turbine Aerodynamic Loading During Surge/Pitch Motion

The objective of Phase III of the Offshore Code Comparison Collaboration, Continued, with Correlation and unCertainty (OC6) project was to validate the accuracy of aerodynamic load predictions by offshore wind modeling tools for a floating offshore wind turbine as it experiences large surge-translational and pitch-rotational motion, as would occur during normal operation. The test data considered were generated at Politecnico di Milano – a wind tunnel with a robotic excitation system to emulate wave loading on the wind turbine. Testing was performed using a scaled version of the DTU 10-MW reference model, and motion was prescribed as harmonic oscillations in the surge and pitch directions, independently. A variety of models were examined in the project, performing a three-way validation between engineering-level tools, higher-fidelity tools, and measurement data from two wind tunnel experimental campaigns. The Load Cases (LC) considered in this testing are as follows: LC 1.X - Steady Wind LC 2.X - Unsteady Wind - Surge Motion LC 3.X - Unsteady Wind - Pitch Motion Details on the results of the OC6 Phase III campaign can be found in the following reference: Bergua R., et al. OC6 project Phase III: validation of the aerodynamic loading on a wind turbine rotor undergoing large motion caused by a floating support structure, Wind Energ. Sci., 8, 465–485, https://doi.org/10.5194/wes-8-465-2023, 2023.

17 WIND ENERGY↗