Search NASA⌕ Search

SEARCH · Search NASA

Results for “highly selective”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Breaking the trade-off between selectivity and adsorption capacity for gas separation

It is generally recognized that porous solids (sorbents) with high selectivity and high adsorption capacity offer potential for energy-efficient gas separations. Unfortunately, there is generally a trade-off between capacity and selectivity, which represents a roadblock to the utility of sorbents in key industrial processes. For example, acetylene (C 2 H 2 ), an important fuel and chemical intermediate, is produced with CO 2 as an impurity, and the similar physicochemical properties of C 2 H 2 and CO 2 mean that most sorbents are poorly selective. Hybrid ultramicroporous materials (HUMs) are candidates for gas separations as they exhibit benchmark selectivity for several key gas pairs. Unfortunately, existing HUMs are handicapped by low capacity. Here, we report a new HUM, SIFSIX-21-Ni, that addresses the trade-off between selectivity and capacity that has plagued sorbents, as its high uptake and high selectivity renders it the new benchmark for C 2 H 2 /CO 2 separation performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Electrolyte Engineering for Efficient Electrochemical Nitrate Reduction to Ammonia on a Titanium Electrode

Nitrates from agricultural runoff and industrial waste streams are a notorious waste product and hazardous pollutant. Traditional electrochemical water remediation approaches aim to solve this problem by converting nitrates to environmentally benign N 2 while minimizing the production of environmentally hazardous side products such as ammonia and nitrous oxide in a process known as “denitrification”. We modify this concept and outline an opportunity to optimize the conversion of nitrates into ammonia, which is also a key commodity product used as a fertilizer, potential fuel, and chemical precursor. The electrochemical conversion of nitrates to ammonia recycles the fixed nitrogen and offers an appealing and supplementary alternative to the energy- and resource-intensive Haber-Bosch process. In this study, we investigated the effect of varying electrochemical conditions (pH, nitrate concentration, and applied potential) on the selective reduction of nitrate to ammonia at a titanium cathode. We observed that high concentrations of both protons and nitrate ions are needed to achieve high selectivity, reaching a peak of 82% Faradaic efficiency to ammonia at an applied potential of -1 V versus RHE and a partial current density to NH 3 of -22 mA/cm 2 , using 0.4 M [NO 3 – ] at pH ~0.77. The Ti electrode, as a poor hydrogen evolution catalyst with notable corrosion resistance, provides a large window of operating conditions to achieve high selectivity in the reduction of nitrate anions. Stability of the system was evaluated, and we found a high Faradaic efficiency throughout the course of an 8 h experiment. After electrochemical testing, titanium hydride was observed at the cathode surface. We also show a preliminary technoeconomic study, indicating that it may be feasible to employ an electrochemical strategy for the production of ammonium nitrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Suppressing CO x in oxidative dehydrogenation of propane with dual-atom catalysts

Oxidative dehydrogenation of propane (ODHP) is a promising route for propylene production, but achieving high selectivity towards propylene while minimizing CO x byproducts remains a significant challenge for conventional metal oxide catalysts. Here we propose a solution to this challenge by employing atomically dispersed dual-atom catalysts (M 1 M' 1 -TiO 2 DACs). Ni 1 Fe 1 -TiO 2 DACs exhibit an ultralow CO x selectivity of 5.2% at a high propane conversion of 46.1% and 520 °C, with stable performance for over 1000 hours. Mechanistic investigations reveal that these catalysts operate via a cooperative Langmuir-Hinshelwood mechanism, distinct from the Mars-van Krevelen mechanism typical of metal oxides. This cooperative pathway facilitates efficient conversion of propane and oxygen into propylene at the dual-atom interface. The superior selectivity arises from facile olefin desorption from the dual-atom sites and suppressed formation of electrophilic oxygen species, which are preferentially adsorbed on Fe 1 sites rather than oxygen vacancies. This work highlights the potential of dual-atom catalysts for highly selective ODHP and provides insights into their unique catalytic mechanism.

02 PETROLEUM↗
DOE OSTI2022

Interfacial interactions between polymers and selective adsorbents influence ion transport properties of boron scavenging ion-exchange membranes

The recent emergence of adsorptive ion-exchange membranes (IEMs), designed by the synergistic integration of highly selective porous aromatic frameworks (PAFs) with ion-exchange polymers, has enabled simultaneous desalination and targeted removal of specific solutes (e.g., mercury, iron, boron, etc.). While the addition of highly selective PAFs to IEMs yields membranes with entirely new functions, PAF-polymer interactions, and the effects of such interactions on ion transport properties of the membranes, are not well understood. In this study, we developed cross-linked adsorptive cation- and anion-exchange membranes (CEMs and AEMs) for simultaneous desalination and boron removal via in-situ formation of the cross-linked polymer network around the boron selective PAF particles. Here we systematically investigated the influence of PAF loading level on PAF-polymer interactions as well as the equilibrium and transport properties of the adsorptive IEMs. The interactions between the PAF and the ion-exchange polymer matrix differed for the CEMs and AEMs due to differences in the fixed charge group chemistry. Notably, the sulfonate groups of the CEMs can form hydrogen bonds with the hydroxyl groups of the PAF, while the quaternary ammonium groups in the AEMs cannot. These differences in interfacial interactions did not significantly impact counter-ion transport across the adsorptive IEMs but had a significant influence on co-ion transport, which affected the counter-ion/co-ion selectivity of the membranes. The selectivity of the adsorptive CEMs decreased while that of the adsorptive AEMs increased with PAF loading level. The results of this study underscore the importance of controlling interfacial interactions when designing adsorptive IEMs for simultaneous water desalination and solute capture and recovery.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Machine learning assisted rediscovery of methane storage and separation in porous carbon from material literature

Porous carbon (PC) has been widely regarded as one of the most promising absorbents for methane storage. Studies show that its uptake capacity and selectivity highly depend on textural structures. Although much effort has been made, unveiling their detailed structure-performance relationship remains a challenge. Here, we propose an innovative study where, with the assistance of machine learning, the hidden relationship of the textural structures of PC with the methane uptake and separation can be derived from existing data in material literature. Machine learning models were trained by the data, including specific surface area, micropore volume, mesopore volume, temperature, and pressure as the input variables and methane uptake as the output variable for prediction. Among the tested models, the multilayer perceptron (MLP) shows the highest accuracy in predicting the methane uptake. In addition, the model enables to automatically construct a uptake performance map in terms of micropore volume and mesopore volume. The obtained MLP model was also extended to explore the CO 2 /CH 4 selectivity by retraining it with the data collected from literature of PC for the CO 2 uptake. Finally, the constructed 2D selectivity map shows that the high selectivity can be achieved in the low CH 4 uptake region.

42 ENGINEERING↗
DOE OSTI2023

Selective Plasmon-Induced Oxidation of 4-Aminothiophenol on Silver Nanoparticles

Selectivity in plasmonic chemistry is typically achieved using bimetallic nanostructures. Herein, we show that monometallic silver nanoparticles can also drive highly selective interfacial transformations, oxidation reactions particularly. This is illustrated through a close inspection of tip-enhanced Raman spectral images of 4-aminothiophenol (ATP)-functionalized Au vs Ag nanoparticles. Further, we find that whereas the thoroughly described dimerization reaction to form 4,4’-dimercaptoazobenzene dominates the response on Au, highly selective oxidation on Ag nanoparticles exclusively leads to 4-nitrothiophenol. We explore the origin of the distinct reaction pathways on Ag vs Au nanostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Reproduction drives changes in space use and habitat selection in a highly adaptable invasive mammal

Abstract For ungulates, it is not well understood how the interaction between habitat and reproduction affects movement behavior, space use, and habitat selection. We used known parturition (farrowing) data to validate First Passage Time (FPT) movement analysis to identify wild pig (Sus scrofa) parturition events from data collected with GPS collars. We examined home range and habitat selection during three physiologically distinct time periods in the reproductive cycle: late-gestation; farrowing; and neonate-care period. Sows exhibited a behavioral change 1-2 days prior to farrowing, suggesting FPT analysis can reliably identify parturition events for wide-ranging species that have a focused birthing area. Home range was smallest during the farrowing period, likely reflective of nest building, parturition, and protection of neonates. Home range size during the neonate-care period was intermediate between the late-gestation and farrowing periods, indicative of offspring care that may restrict maternal movement. Across all periods, sows avoided developed areas that have sparse canopy and ground cover and are associated with human activities. During late-gestation, sows avoided pine forests that have an open understory and less vegetative cover. During late-gestation and neonate-care, sows selected bottomland hardwood forests, habitat associated with ample food, cover, and water. During farrowing and neonate-care periods, sows selected upland hardwood forests, habitat with high quality food and cover for neonates. The physiological requirements of reproduction drive female habitat selection and spatial scale of movement patterns associated with parturition. Our study contributes to delineation of the appropriate scale at which to analyze movement data to provide insight about where individuals chose to place their home range, how much space to use, and how they use resources on the landscape to maximize reproductive success and fitness.

Zoology↗
DOE OSTI2025

Selective semihydrogenation of acetylene in ethylene using defect-rich boron nitride catalyst from flux reconstruction

Efficient removal of trace acetylene from ethylene streams is essential for producing polymer-grade ethylene, yet achieving highly selective semihydrogenation without over-hydrogenation remains a long-standing challenge. A key barrier is the lack of a simple, low-cost catalyst that can activate hydrogen effectively while preventing ethylene from reacting further. Here we show that defect-rich boron nitride, prepared through a straightforward flux reconstruction method, serves as a highly selective and metal-free catalyst for acetylene semihydrogenation. The catalyst contains abundant open boron and nitrogen sites that enable efficient hydrogen activation and rapid release of ethylene, thereby avoiding over-hydrogenation. Experiments combined with isotope labeling and theoretical analysis reveal that these defects lower the energy barrier for hydrogen activation while accelerating product desorption. Our findings demonstrate a scalable strategy for defect engineering in boron nitride and highlight its potential as a robust, sustainable alternative to metal-based catalysts in industrial ethylene purification.

Wang, Tao [Oak Ridge National Laboratory (ORNL), O↗
DOE OSTI2023

Genesis of Active Pt/CeO 2 Catalyst for Dry Reforming of Methane by Reduction and Aggregation of Isolated Platinum Atoms into Clusters

Atomically dispersed metal catalysts offer the advantages of efficient metal utilization and high selectivities for reactions of technological importance. Such catalysts have been suggested to be strong candidates for dry reforming of methane (DRM), offering prospects of high selectivity for synthesis gas without coke formation, which requires ensembles of metal sites and is a challenge to overcome in DRM catalysis. However, investigations of the structures of isolated metal sites on metal oxide supports under DRM conditions are lacking, and the catalytically active sites remain undetermined. Data characterizing the DRM reaction-driven structural evolution of a cerium oxide- supported catalyst, initially incorporating atomically dispersed platinum, and the corresponding changes in catalyst performance are reported. X-ray absorption and infrared spectra show that the reduction and agglomeration of isolated cationic platinum atoms to form small platinum clusters/nanoparticles are necessary for DRM activity. Density functional theory calculations of the energy barriers for methane dissociation on atomically dispersed platinum and on platinum clusters support these observations. Here the results emphasize the need for in-operando experiments to assess the active sites in such catalysts. The inferences about the catalytically active species are suggested to pertain to a broad class of catalytic conversions involving the rate-limiting dissociation of light alkanes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

In-situ exsolution of bimetallic CoFe nanoparticles on (La,Sr)FeO 3 perovskite: Its effect on electrocatalytic oxidative coupling of methane

This study presents in-situ reduction of lanthanum strontium cobalt ferrite (LSCF) perovskite as an effective method for modifying its surface properties and enhancing its electrocatalytic reactivity for oxidative coupling of methane (OCM). The evolution of hetero-phases during the reduction of LSCF resulted in CoFe nanoparticles being formed at the surface. The in-situ reduced LSCF cell for OCM could be operated in either an ion pump or a fuel cell mode. High selectivity of 63% and 10.2% were reported for C 2+ hydrocarbons and C 3 H 6 , respectively. DFT calculations on LSCF and CoFe revealed that the high selectivity of C 2+ hydrocarbons on the LSCF primarily stems from the presence of CoFe nanoparticles. In-situ DRIFTS conducted under CH 4 proved that complete oxidation of CH 4 can be effectively inhibited by reducing LSCF, and control of oxygen supply is an important parameter for selective conversion of CH 4 to higher order hydrocarbon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Methane Partial Oxidation over Multifunctional 2-D Materials

The objective of this research is to design, synthesize, and evaluate highly selective, active, and stable multifunctional catalysts for the low temperature (< 500 Kelvin (K)) partial oxidation of methane to methanol (MTM) with molecular oxygen: CH 4 (g) + $\frac{1}{2}$O 2 (g) → CH 3 OH(g). Methane, the primary component of natural gas, is a source of energy and economic growth as well as an environmental concern. Recent developments in horizontal drilling and enhanced extraction methods have resulted in production of an estimated 62.4 trillion m 3 of ‘stranded’, or uneconomic, natural gas. Uneconomical natural gas is often flared or vented at remote oil production sites. Leaked, flared, and/or vented gas represents a "lost opportunity”, and this research project aims to maximize the value of the resource. Conventional catalysts for MTM suffer from low methanol selectivity since they exhibit ~0.55 eV higher barrier for C-H bond activation of methane compared to methanol. Without breaking these scaling relations, methanol oxidation is orders of magnitude faster than methane oxidation and it is very challenging to envision a process with economically viable single-pass yield. Here, we chose to investigate single-atom catalysts embedded and stabilized in two-dimensional materials such as graphene (GR) and "supported" on Group VIII and IB transition metals such as nickel. The electronic atomic monolayer-metal support interaction (EAMSI) present in these systems could promote methanol selectivity by breaking the scaling relations of the C-H bond activation of methane and methanol. A density functional theory (DFT) based computational study focused on predicting families of GR-based catalysts that could be active and selective for MTM. The catalyst systems predicted by the computational study were synthesized and evaluated for the gas phase MTM under relevant conditions. Unfortunately, the experimental activity and selectivity was lower than computationally predicted. The origin for the discrepancy is likely related to difficulties in synthesizing single atom catalysts in a threecomponent catalyst system at high density and with high selectivity. Future work in our groups is thus focused on reducing the system complexity to a two-component catalyst system. Finally, a techno-economic analysis (TEA) was also conducted to identify critical bottlenecks that inhibit future commercialization.

03 NATURAL GAS↗
DOE OSTI2023

Hierarchically Templated Synthesis of 3D‐Printed Crosslinked Cyclodextrins for Lycopene Harvesting

Abstract Plants produce a wide range of bioactive phytochemicals, such as antioxidants and vitamins, which play crucial roles in aging prevention, inflammation reduction, and reducing the risk of cancer. Selectively harvesting these phytochemicals, such as lycopene, from tomatoes through the adsorption method is cost‐effective and energy efficient. In this work, a templated synthesis of 3D‐printed crosslinked cyclodextrin polymers featuring nanotubular structures for highly selective lycopene harvesting is reported. Polypseudorotaxanes formed by triethoxysilane‐based telechelic polyethylene glycols and α‐cyclodextrins (α‐CDs) are designed as the template to (1) synthetically access urethane‐based nanotubular structures at the molecular level, and (2) construct 3D‐printed architectures with designed macroscale voids. The polypseudorotaxane hydrogels showed good rheological properties for direct ink writing, and the 3D‐printed hydrogels were converted to the desired α‐CD polymer network through a three‐step postprinting transformation. The obtained urethane‐crosslinked α‐CD monoliths possess nanotubular structures and 3D‐printed voids. They selectively adsorb lycopene from raw tomato juice, protecting lycopene from photo‐ or thermo‐degradations. This work highlights the hierarchically templated synthesis approach in developing functional 3D‐printing materials by connecting the bottom‐up molecular assembly and synthesis with the top‐down 3D architecture control and fabrication.

Chemistry↗
DOE OSTI2020

Smart Microbial Cells Couple Catalysis and Sensing to Provide High-Throughput Selection of an Organophosphate Hydrolase

Enzyme engineering for gain of function requires navigating a large combinatorial sequence space efficiently. Typically, many mutations are needed to get significant improvements, while a single “bad” mutation can inactivate the enzyme. To establish high-throughput screening and achieve enhanced resolution between two variants, genetic libraries of the organophosphate hydrolase enzyme paraoxonase 1 (PON 1 ) were rapidly screened via an engineered positive-feedback circuit: a p-nitrophenol (PNP)-specific transcription factor (TF) regulated expression of PON 1 , which catalyzed paraoxon breakdown and PNP production. Rare active mutant colonies, picked by simple visual fluorescence of a PON 1 –green fluorescent protein (GFP) fusion, were characterized. Furthermore, in a single screening round, high (library-scale) throughput enabled the discovery of enhanced paraoxon degradation activity in PON 1 , including structurally unexpected mutations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Ion separations with membranes

Ion separations are important for resource recovery, water treatment, and energy production and storage. Techniques such as chemical precipitation, selective adsorption, and solvent extraction are effective, but membranes may separate ions continuously with less waste and lower energy costs. Separation of monovalent and multivalent ions with nanofiltration or electrodialysis membranes already enables water softening and edible salt purification. Similar membranes are attractive as separators in vanadium redox flow batteries. Selective partitioning of divalent counter-ions into ion-exchange membranes even allows transport of these ions against their concentration gradients in salt mixtures. However, separations of ions with the same charge is more challenging. Recent research demonstrated highly selective ion “sieving” at small scales. Here, separations using electrical potentials and differences in ion electrophoretic mobilities are promising, but relatively unexplored. Carrier-mediated transport affords high selectivity in liquid membranes, but these systems are not very stable, and selective transport via hopping between anchored carriers has proven elusive. Finally, this paper discusses how concentration polarization decreases selectivities in many membrane processes. Although development of selective, inexpensive ion-separation membranes is a work in progress, successes in water softening and edible salt purification suggests that future selective membranes will serve as complementary methods to traditional purification techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

An Intensified Electro-Catalytic Process for Production of Formic Acid from Power Plant CO 2 Emissions (Final Technical Report)

The goal of this project was to develop and test a novel electro-catalytic method for the production of high-value formic acid from coal-derived CO 2 as a strategy to offset the cost of CO 2 capture. Formic acid is currently produced from the conversion of higher-order carbon products such as methane and/or methanol. This electro-catalytic CO 2 reduction process utilizes a highly selective catalyst in a flow-through reactor design to maximize the formic acid production rate. The specific objectives of this proposed study were to; 1) produce and screen highly selective engineered CO 2 reducing catalysts capable of exclusively producing formic acid; 2) immobilize the catalyst within a flow process to continually produce formic acid and increase catalyst lifetime; and 3) assess the stability of the electrocatalyst during long-term operation. The project involved the development and testing of an engineered catalyst to selectively reduce CO 2 directly and exclusively to formic acid. After the best-performing catalyst was selected, it was immobilized and tested inside a flow-through reactor at UK CAER using realistic conditions expected from CO 2 produced during coal combustion and separated by a CO 2 capture plant.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

A novel optical sensor for Pb 2+ detection based on in-situ formation of Ruddlesden-Popper phase (C 4 H 9 NH 3 ) 2 PbBr 4 perovskite

On account of the concentration sensitive photoluminescence (PL) property of the lead-based Ruddlesden-Popper (RP) phase perovskite material, a novel sensing mechanism for highly selective Pb 2+ detection based on the in-situ formation of highly emissive luminescence structure matrix (C 4 H 9 NH 3 ) 2 PbBr 4 has been demonstrated. The sensor exhibits high sensitivity and selectivity for detecting Pb 2+ in complex metal cations mixture solution. This research reports a novel type of sensor mechanism based on the in-situ formation of luminescent lead-based RP phase perovskite. Here, it paves the way for developing highly selective optical sensors for detecting heavy metal cations via their corresponding luminescence structure matrix.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Solvent-Induced Selectivity of Isoprene From Bio-Derived Prenol

In this work we demonstrate the selective catalytic conversion of prenol, which is an allylic alcohol that can be prepared from renewable resources to isoprene. The catalyst is an inexpensive molybdenum complex (Molyvan L) designed and used as an additive for lubricants. Isoprene is generated under relatively mild reaction parameters at 130–150°C, for 2 h, under vapor pressure conditions that do not exceed 50 psi. Two cases were studied: one in which Molyvan L was dissolved in a base oil at 1% concentration (weight/weight) and then mixed with a solvent and prenol and the other in which neat Molyvan L was introduced in the reaction and the base oil was replaced with the solvent and prenol. We investigated the selectivity of the reaction using the following solvents in both cases: dodecane, dodecanol, isododecane, octane, blendstock for oxygenate blending (BOB3), a fuel surrogate, a polyalphaolefin (PAO4), and methoxy polyethylene glycol (methoxy PEG350). Although conversion of prenol was above 94% in all experiments, isoprene was formed with various degrees of efficiency alongside a prenol isomeric alcohol, diprenyl ether and mixed ether via intramolecular and intermolecular dehydration reactions. Dodecane appeared to have the highest level of selectivity initially in base oil so we studied the effect of various dodecane-like solvents on isoprene yield and product profile. Surprisingly, octane (similar to dodecane) and isododecane (branched alkane) generated insignificant amounts of byproducts, essentially providing the highly desired isoprene with a very high selectivity. Branching of the solvent does not appear to have an effect on selectivity. Another advantage of this catalyst is the low loadings required to effect the transformation; that is, 0.25% (weight/volume) in the cases using neat Molyvan L and 0.5% (weight/volume) in the cases using Molyvan L dissolved in the base oil. Provided that prenol can be produced in large scale from bioresources, this work would enable the sustainable production of isoprene, in good yield, and with very high selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Nitrogen-Defective Polymeric Carbon Nitride Nanolayer Enabled Efficient Electrocatalytic Nitrogen Reduction with High Faradaic Efficiency

Identifying highly selective catalysts and accurately measuring NH 3 yield without false-positives from contaminations remain two challenges in electrochemical nitrogen reduction reaction (NRR). Here, we report N-defective carbon nitride grown on carbon paper (CN/C) as a highly selective electrocatalyst. The NH 3 yield was determined reliably by the slope of mNH 3 -time plot rather than averaging the accumulated amount over time. Results showed the as-synthesized CN/ C 600 (synthesized at 600 °C) with a higher density of C=N-C N2C vacancies achieved an NH 3 production of 2.9 μg mgcat. -1 h -1 at -0.3 V (versus RHE), ~5.7-fold higher than CN/C 500 . The Faradaic efficiency for CN/ C 600 is among the highest of 62.1%, 33.9%, and 16.8% at -0.1 V, -0.2 V, and -0.3 V, respectively. The NH 3 production was verified by isotope 15 N 2 experiments. Further increase of N-defects on CN/C 600 using plasma etching led to higher NH 3 yield than comparably larger current, pointing to N-defects sites for promoting NRR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗