Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydrogen peroxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Utilization of Novel (KNbO 3 ) 1− x (Ba 2 FeNbO 6 ) x ( x = 0.1, 0.2, 0.3) Solid Solutions for Efficient Photo‐Assisted Fenton Degradation of Methylene Blue Dye

Novel (KNbO 3 ) 1− x (Ba 2 FeNbO 6 ) x ( x = 0.1, 0.2, 0.3) solid solutions corresponding to K 0.82 Ba 0.18 Fe 0.09 Nb 0.91 O 3 , K 0.64 Ba 0.36 Fe 0.18 Nb 0.82 O 3 , and K 0.46 Ba 0.54 Fe 0.27 Nb 0.73 O 3 compounds have been synthesized via molten salt method. X‐ray diffraction confirms the formation of solid solutions, while transmission electron microscopy combined with energy‐dispersive spectroscopy results demonstrates a homogeneous distribution of elements. The obtained solid solutions crystallized in a cubic crystal structure, whereas the parent KNbO 3 possesses an orthorhombic structure. The wide bandgap semiconductor KNbO 3 transformed into a visible‐light‐active material, with its bandgap energy reduced from 3.56 eV to ≈2.4 eV. The substitution of K in KNbO 3 with Ba is responsible for structural modification from orthorhombic to cubic symmetry, whereas both structural modification and the substitution of Nb with Fe correlated with optical properties. The photocatalytic activities of all obtained solid solutions are improved compared with the parent KNbO 3 and Ba 2 FeNbO 6 compounds for photocatalytic degradation of methylene blue (MB) dye. Among the series of solid solutions, K 0.82 Ba 0.18 Fe 0.09 Nb 0.91 O 3 photocatalysts show the highest MB removal efficiency owing to its relatively higher surface area, suppressed charge carrier recombination, and more negative conduction band edge. Moreover, K 0.82 Ba 0.18 Fe 0.09 Nb 0.91 O 3 photocatalyst (0.1 g) combined with hydrogen peroxide (H 2 O 2 ) to form a novel photo‐Fenton system, achieving almost complete degradation of 100 mL of 10 mg L −1 MB dye in 30 min.

Avcıoğlu, Celal [Technische Universität Berlin, Fa↗
DOE OSTI2024

Influence of Ti‐incorporated Zeolite Topology and Pore Condensation on Vapor Phase Propylene Epoxidation Kinetics with Gaseous H 2 O 2

Abstract Vapor‐phase propylene (C 3 H 6 ) epoxidation kinetics with hydrogen peroxide (H 2 O 2 ) strongly reflects the physical properties of Ti‐incorporated zeolite catalysts and the presence of spectating molecules (“solvent”) near active sites even without a bulk liquid phase. Steady‐state turnover rates of C 3 H 6 epoxidation and product selectivities vary by orders of magnitudes, depending on the zeolite silanol ((SiOH) x ) density, pore topology (MFI, *BEA, FAU), and the quantity of condensed acetonitrile (CH 3 CN) molecules nearby active sites, under identical reaction mechanisms sharing activated H 2 O 2 intermediates on Ti surfaces. Individual kinetic analyses for propylene oxide (PO) ring‐opening, homogeneous diol oxidative cleavage, and homogeneous aldehyde oxidation reveal that secondary reaction kinetics following C 3 H 6 epoxidation responds more sensitively to the changes in zeolite physical properties and pore condensation with CH 3 CN. Thus, higher PO selectivities achieved in hydrophilic Ti‐MFI at steady‐state reflect the preferential stabilization of transition states for C 3 H 6 epoxidation (a primary reaction) relative to PO ring‐opening and oxidative cleavage (secondary reactions) that solvation effects that reflect interactions among condensed CH 3 CN within pores and the extended pore structure.

Kwon, Ohsung↗
DOE OSTI2024

Influence of Ti‐incorporated Zeolite Topology and Pore Condensation on Vapor Phase Propylene Epoxidation Kinetics with Gaseous H 2 O 2

Vapor-phase propylene (C 3 H 6 ) epoxidation kinetics with hydrogen peroxide (H 2 O 2 ) strongly reflects the physical properties of Ti-incorporated zeolite catalysts and the presence of spectating molecules (“solvent”) near active sites even without a bulk liquid phase. Steady-state turnover rates of C 3 H 6 epoxidation and product selectivities vary by orders of magnitudes, depending on the zeolite silanol ((SiOH) x ) density, pore topology (MFI, *BEA, FAU), and the quantity of condensed acetonitrile (CH 3 CN) molecules nearby active sites, under identical reaction mechanisms sharing activated H 2 O 2 intermediates on Ti surfaces. Individual kinetic analyses for propylene oxide (PO) ring-opening, homogeneous diol oxidative cleavage, and homogeneous aldehyde oxidation reveal that secondary reaction kinetics following C 3 H 6 epoxidation responds more sensitively to the changes in zeolite physical properties and pore condensation with CH 3 CN. Thus, higher PO selectivities achieved in hydrophilic Ti-MFI at steady-state reflect the preferential stabilization of transition states for C 3 H 6 epoxidation (a primary reaction) relative to PO ring-opening and oxidative cleavage (secondary reactions) that solvation effects that reflect interactions among condensed CH 3 CN within pores and the extended pore structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Electrogenetic signaling and information propagation for controlling microbial consortia via programmed lysis

To probe signal propagation and genetic actuation in microbial consortia, we have coopted the components of both redox and quorum sensing (QS) signaling into a communication network for guiding composition by “programming” cell lysis. Here, in this paper, we use an electrode to generate hydrogen peroxide as a redox cue that determines consortia composition. The oxidative stress regulon of Escherichia coli, OxyR, is employed to receive and transform this signal into a QS signal that coordinates the lysis of a subpopulation of cells. We examine a suite of information transfer modalities including “monoculture” and “transmitter-receiver” models, as well as a series of genetic circuits that introduce time-delays for altering information relay, thereby expanding design space. A simple mathematical model aids in developing communication schemes that accommodate the transient nature of redox signals and the “collective” attributes of QS signals. We suggest this platform methodology will be useful in understanding and controlling synthetic microbial consortia for a variety of applications, including biomanufacturing and biocontainment.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Catalase protects against nonenzymatic decarboxylations during photorespiration in Arabidopsis thaliana

Abstract Photorespiration recovers carbon that would be otherwise lost following the oxygenation reaction of rubisco and production of glycolate. Photorespiration is essential in plants and recycles glycolate into usable metabolic products through reactions spanning the chloroplast, mitochondrion, and peroxisome. Catalase in peroxisomes plays an important role in this process by disproportionating H 2 O 2 resulting from glycolate oxidation into O 2 and water. We hypothesize that catalase in the peroxisome also protects against nonenzymatic decarboxylations between hydrogen peroxide and photorespiratory intermediates (glyoxylate and/or hydroxypyruvate). We test this hypothesis by detailed gas exchange and biochemical analysis of Arabidopsis thaliana mutants lacking peroxisomal catalase. Our results strongly support this hypothesis, with catalase mutants showing gas exchange evidence for an increased stoichiometry of CO 2 release from photorespiration, specifically an increase in the CO 2 compensation point, a photorespiratory‐dependent decrease in the quantum efficiency of CO 2 assimilation, increase in the 12 CO 2 released in a 13 CO 2 background, and an increase in the postillumination CO 2 burst. Further metabolic evidence suggests this excess CO 2 release occurred via the nonenzymatic decarboxylation of hydroxypyruvate. Specifically, the catalase mutant showed an accumulation of photorespiratory intermediates during a transient increase in rubisco oxygenation consistent with this hypothesis. Additionally, end products of alternative hypotheses explaining this excess release were similar between wild type and catalase mutants. Furthermore, the calculated rate of hydroxypyruvate decarboxylation in catalase mutant is much higher than that of glyoxylate decarboxylation. This work provides evidence that these nonenzymatic decarboxylation reactions, predominately hydroxypyruvate decarboxylation, can occur in vivo when photorespiratory metabolism is genetically disrupted.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Temporal Sampling of Enzymes from Live Cells by Localized Electroporation and Quantification of Activity by SAMDI Mass Spectrometry

Abstract Measuring changes in enzymatic activity over time from small numbers of cells remains a significant technical challenge. In this work, a method for sampling the cytoplasm of cells is introduced to extract enzymes and measure their activity at multiple time points. A microfluidic device, termed the live cell analysis device (LCAD), is designed, where cells are cultured in microwell arrays fabricated on polymer membranes containing nanochannels. Localized electroporation of the cells opens transient pores in the cell membrane at the interface with the nanochannels, enabling extraction of enzymes into nanoliter‐volume chambers. In the extraction chambers, the enzymes modify immobilized substrates, and their activity is quantified by self‐assembled monolayers for matrix‐assisted laser desorption/ionization (SAMDI) mass spectrometry. By employing the LCAD‐SAMDI platform, protein delivery into cells is demonstrated. Next, it is shown that enzymes can be extracted, and their activity measured without a loss in viability. Lastly, cells are sampled at multiple time points to study changes in phosphatase activity in response to oxidation by hydrogen peroxide. With this unique sampling device and label‐free assay format, the LCAD with SAMDI enables a powerful new method for monitoring the dynamics of cellular activity from small populations of cells.

Mukherjee, Prithvijit↗
DOE OSTI2023

Multifunctional Chiral Chemically‐Powered Micropropellers for Cargo Transport and Manipulation

Practical applications of synthetic self-propelled nano and microparticles for microrobotics, targeted drug delivery, and manipulation at the nanoscale are rapidly expanding. However, fabrication limitations often hinder progress, resulting in relatively simple shapes and limited functionality. Here, taking advantage of 3D nanoscale printing, chiral micropropellers powered by the hydrogen peroxide reduction reaction are fabricated. Due to their chirality, the propellers exhibit multifunctional behavior controlled by an applied magnetic field: spinning in place (loitering), directed migration in the prescribed direction, capture, and transport of polymer cargo particles. Design parameters of the propellers are optimized by computation modeling based on mesoscale molecular dynamics. It is predicted by computer simulations, and confirmed experimentally, that clockwise rotating propellers attract each other and counterclockwise repel. These results shed light on how chirality and shape optimization enhance the functionality of synthetic autonomous micromachines.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Large-scale dissolution of sintered Mo disks

Non-uranium production of 99 Mo via neutron capture or by photonuclear reaction using an electron accelerator is receiving considerable attention. For commercial production of 99 Mo, post-irradiation processes must incorporate a robust design for easy scale-up. Once developed, large-scale chemical processes must be optimized for hot-cell operations and potential automation. In this work, we present experimental results on the large-scale dissolution of sintered Mo disks using three 50% hydrogen peroxides from different suppliers. Dissolution rates obtained for 600-g Mo batches and potential reasons for different dissolution behaviors is discussed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2026

Ozonolysis of selenium: an alternative oxidation method for radiochemical separations of arsenic and selenium

Many arsenic and selenium radiochemical separation methods use hydrogen peroxide (H 2 O 2 ) to oxidize selenite (Se(IV)) to selenate (Se(VI)), but this reaction is challenging to control and replicate. Here, this study introduces a simple ozonolysis apparatus with an in-line oxygen-ozone generator and impinger system for rapid selenium oxidation in aqueous samples as an alternative to H 2 O 2 . The system quickly converts Se(IV) to Se(VI), enabling successful separations of arsenic-73 and selenium-75 with high recoveries using ion-exchange chromatography (1-X8). Compared to traditional H 2 O2 treatment, ozone oxidation is a faster and more easily controlled method for selenium redox chemistry.

and nuclear chemistry↗
DOE OSTI2023

Harvesting 88 Zr from heavy-ion beam irradiated tungsten at the National Superconducting Cyclotron Laboratory

Tungsten is a commonly used material at many heavy-ion beam facilities, and it often becomes activated due to interactions with a beam. Many of the activation products are useful in basic and applied sciences if they can be recovered efficiently. In order to develop the radiochemistry for harvesting group (IV) elements from irradiated tungsten, a heavy-ion beam containing 88 Zr was embedded into a stack of tungsten foils at the National Superconducting Cyclotron Laboratory and a separation methodology was devised to recover the 88 Zr. The foils were dissolved in 30% hydrogen peroxide, and the 88 Zr was chemically purified from the tungsten matrix and from other co-implanted radionuclides (such as 85 Sr and 88 Y) using strong cation-exchange (AG MP-50) chromatographic resin in sulfuric acid media. The procedure provided 88 Zr in approximately 60 mL 0.5 M sulfuric acid with no detectable radio-impurities. The overall recovery yield for 88 Zr was (92.3 ± 1.2)%. In conclusion, this proof-of-concept experiment has facilitated the development of methodologies to harvest from tungsten and tungsten-alloy parts that are regularly irradiated at heavy-ion beam facilities.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2021

End-gas autoignition fraction and flame propagation rate in laser-ignited primary reference fuel mixtures at elevated temperature and pressure

Knock in spark-ignited (SI) engines is initiated by autoignition of the unburned gasses upstream of spark-ignited, propagating, turbulent premixed flames. Knock propensity of fuel/air mixtures is typically quantified using research octane number (RON), motor octane number (MON), or methane number (MN; for gaseous fuels), which are measured using single-cylinder, variable compression ratio engines. In this study, knock propensity of SI fuels was quantified via observations of end-gas autoignition (EGAI) in unburned gasses upstream of laser-ignited, premixed flames at elevated pressures and temperatures in a rapid compression machine. Stoichiometric primary reference fuel (PRF; n-heptane/isooctane) blends of varying reactivity (50 ≤ PRF ≤ 100) were ignited using an Nd:YAG laser over a range of temperatures and pressures, all in excess of 545 K and 16.1 bar. Laser ignition produced outwardly-propagating premixed flames. High-speed pressure measurements and schlieren images indicated the presence of EGAI. The fraction of the total heat release attributed to EGAI (i.e., EGAI fraction) varied with fuel reactivity (i.e., octane number) and the time-integrated temperature of the end-gas prior to ignition. Flame propagation rates, which were measured using schlieren images, were only weakly correlated with octane number but were affected by turbulence caused by variation in piston timing. Under conditions of low turbulence, measured flame propagation rates approached one-dimensional premixed laminar flame speed computations performed at the same conditions. Experiments were simulated with a three-dimensional CONVERGE™ model using reduced chemical kinetics (121 species, 538 reactions). The simulations accurately captured the measured flame propagation rates, as well as the variation in EGAI fraction with fuel reactivity and time-integrated end-gas temperature. The simulations also revealed low-temperature heat release as well as formaldehyde and hydrogen peroxide formation in the end-gas upstream of the propagating flame, which increased the temperature and degree of chain branching in the end-gas, ultimately leading to EGAI.

42 ENGINEERING↗
DOE OSTI2025

Unsupported and carbon-supported silver catalysts for oxygen reduction reaction in alkaline media

Quick and easy Ag catalysts preparation via wet chemical synthesis method using only reducing agent (pure-Ag); reducing agent and citric acid as the capping agent (Ag-CA); and carbon support (KetjenBlack 600J), capping agent, and the reducing agent (Ag/C) is demonstrated. The Ag-based electrocatalysts are characterized by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) with energy-dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis, and X-ray photoelectron spectroscopy (XPS). The electrocatalytic activity of Ag catalysts for O 2 reduction reaction (ORR) in 1 M KOH is evaluated using the rotating (ring)-disc electrode method. SEM and HAADF-STEM results show that the unsupported pure-Ag and Ag-CA catalysts consist mainly of big agglomerates, and Ag/C has the smallest agglomerates and some sub-3 nm Ag nanoparticles. The XPS results reveal that Ag in all the catalysts is in the metallic form (Ag 0 ). Despite consisting of big agglomerates, the Ag-CA catalyst exhibits similar ORR electrocatalytic activity to that of Ag/C. Ag-CA (unsupported) shows the lowest hydrogen peroxide yield. These results are of great importance for the development of Ag-based catalysts that can be prepared in a fast, simple and easily up scalable fashion, for anion exchange membrane fuel cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Efficient separation and coprecipitation for simplified cathode recycling

Hydrometallurgical recycling of spent lithium-ion batteries is among the most promising recovery approaches. The current hydrometallurgical method for battery recycling faces challenges such as complex separation and precipitation processes, and environmental concerns from the use of caustic inorganic acid and hazardous hydrogen peroxide. Our proposed modified method, namely polyol-metallurgy, uses citric acid in ethylene glycol as dual-function green solution to overcome these obstacles. This bifunctional solution leaches valuable metal ions from cathode materials (e.g., LiCoO 2 ), and then acts as chelating agents to selectively precipitate cobalt through an esterification reaction, without the need for additional precipitation agents. The leaching efficiency of cobalt and lithium reaches 99.55% and 97.65%, respectively, and more than 96% of cobalt could be directly self-precipitated and recovered. Further, the unique characteristics of the dual-function solution also avoids impurities from Al foils and PVDF/carbon black films, enabling the simple separation process. Therefore, the process can be completed in one-pot system with efficient leaching, separation and coprecipitation, making it more efficient and feasible for operation than existing alternatives.

25 ENERGY STORAGE↗
DOE OSTI2025

Extraction of high-purity medium-chain-length polyhydroxyalkanoates via combined mechanical treatment and mild oxidation

Polyhydroxyalkanoates (PHAs) are a class of polyester polymers of microbial origin and considered biodegradable alternatives to conventional plastics. To make PHAs cost-competitive with synthetic plastics, their production cost, including extraction cost, should be significantly reduced. Herein, this study aimed to develop an effective extraction method based on combined mechanical disruption and chemical treatment for the recovery of high-purity medium-chain-length PHAs (mcl-PHAs) at a lower cost. mcl-PHAs-accumulating Pseudomonas strains were used for PHA extraction via high-pressure homogenization (HPH) coupled with surfactant treatment and mild alkaline hydrogen peroxide oxidation. The mechanical-chemical method was found to have strong synergy for PHA extraction while minimizing PHA depolymerization. The optimized condition resulted in nearly 90 % mcl-PHA recovery with high purity (>91 %). The extracted high-purity PHAs exhibited thermal and mechanical properties suitable for downstream applications entailing flexible and elastomeric materials.

42 ENGINEERING↗
DOE OSTI2022

Probing surface-adsorbate interactions through active particle dynamics

Adsorbate molecules present in a reaction mixture may bind to and block catalytic sites. Measurement of the surface coverage of these molecules via adsorption isotherms is critical for modeling and design of catalytic reactions on surfaces. However, it is challenging to measure isotherms in solution in a way that is directly relevant to catalytic activity under reaction conditions, particularly since adsorbates may bind with an enormous range of surface affinity parameters. Here we used the motion of self-propelled catalytic Janus particles, which employ the decomposition of hydrogen peroxide fuel as a propulsion mechanism, to determine the effective surface coverage of thioglycerol, furfural, and ethanol on a platinum surface as a function of concentration in aqueous solution by measuring the decrease in active motion due to the blocking of active sites. For strongly adsorbing thioglycerol, this effective coverage was compared and contrasted to the total adsorbed amount measured using inductively-coupled plasma analysis. Demonstrating the broad applicability of this approach, the surface affinity of the three adsorbates spanned more than four orders of magnitude. For each species, the adsorbate-mediated attenuation of active motion occurred over a wide concentration range and was well-described by a Langmuir isotherm. The strongly interacting thioglycerol had the highest affinity towards the surface (K a = 15.5 ± 4.3 mM –1 ) and fully deactivated the active particle motion at surface saturation. Furfural had an intermediate affinity (K a = 0.42 ± 0.07 mM –1 ) but did not fully block H 2 O 2 access to the surface at apparent saturation, consistent with a maximum fractional surface coverage of θ max = 0.67. Ethanol exhibited even lower affinity (K a = 0.0025 ± 2x10 -4 mM –1 ) and its coverage saturated at only θ max = 0.38. Analysis of isotherms at elevated temperatures enabled direct extraction of the enthalpies of adsorption. The degree of surface coverage at adsorbate saturation appeared to correlate with the relative energies of adsorption for the different adsorbate species and was consistent with adsorbate saturation of one of multiple active site populations towards H 2 O 2 decomposition. Furthermore, computational investigations into solvent effects on furfural adsorption showed good quantitative agreement with the experimental results. This work leverages unique properties of active particles to explore fundamental catalysis questions and demonstrates a novel paradigm for significant and experimentally accessible multidisciplinary research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Microdynamics of active particles in defect-rich colloidal crystals

Hypothesis. Because they are self-propulsive, active colloidal particles can interact with their environment in ways that differ from passive, Brownian particles. Here, we explore how interactions in different microstructural regions may contribute to colloidal crystal annealing. Experiments. We investigate active particles propagating in a quasi-2D colloidal crystal monolayer produced by alternating current electric fields (active-to-passive particle ratio ~ 1:720). The active particle is a platinum Janus sphere propelled by asymmetric decomposition of hydrogen peroxide. Crystals are characterized for changes in void properties. The mean-squared-displacement of Janus particles are measured to determine how active microdynamics depend on the local microstructure, which is comprised of void regions, void-adjacent regions (defined as within three particle diameters of a void), and interstitial regions. Findings. At active particle energy E A = 2.55 k B T, the average void size increases as much as three times and the average void anisotropy increases about 40% relative to the passive case. Further, the average microdynamical enhancement, <δ(t)>, of Janus particles in the crystal relative to an equivalent passive Janus particle is reduced compared to that of a free, active particle (<δ(t) > is 1.88 ± 0.04 and 2.66 ± 0.08, respectively). The concentration of active particles is enriched in void and void-adjacent regions. Active particles exhibit the greatest change in dynamics relative to the passive control in void-adjacent regions (<δ(t)> = 2.58 ± 0.06). The results support the conjecture that active particle microdynamical enhancement in crystal lattices is affected by local defect structure.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Bioinspired oxidation of benzyl alcohol: The role of environment and nuclearity of the catalyst evaluated by multivariate analysis

Inspired by copper-containing enzymes such as galactose oxidase and catechol oxidase, in which distinct coordination environments and nuclearities lead to specific catalytic activities, we summarize here the catalytic properties of dinuclear and mononuclear copper species towards benzyl alcohol oxidation using a multivariate statistical approach. Here, the new dinuclear [Cu 2 (μ-L 1 )(μ-pz)] 2+ (1) is compared against the mononuclear [CuL 2 Cl] (2), where (L 1 ) - and (L 2 ) - are the respective deprotonated forms of 2,6-bis((bis(pyridin-2-ylmethyl)amino)methyl)-4-methylphenol, and 3-((bis(pyridin-2-ylmethyl)amino)methyl)-2-hydroxy-5-methylbenzaldehyde and (pz) - is a pyrazolato bridge. Copper(II) perchlorate (CP) is used as control. The catalytic oxidation of benzyl alcohol is pursued, aiming to assess the role of the ligand environment and nuclearity. The multivariate statistical approach allows for the search of optimal catalytic conditions, considering variables such as catalyst load, hydrogen peroxide load, and time. Species 1, 2 and CP promoted selective production of benzaldehyde at different yields, with only negligible amounts of benzoic acid. Under normalized conditions, 2 showed superior catalytic activity. This species is 3.5-fold more active than the monometallic control CP, and points out to the need for an efficient ligand framework. Species 2 is 6-fold more active than the dinuclear 1, and indicates the favored nuclearity for the conversion of alcohols into aldehydes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

An investigation on the structural stability of $\mathrm{ZIF}$-8 in water versus water-derived oxidative species in aqueous environment

We report the zeolitic-imidazolate-framework-8 (ZIF-8) is one of the extensively studied metal-organic frameworks (MOF) materials because of its unique structure. For its potential applicability in numerous fields, it becomes crucial to have detailed studies on the structural stability of ZIF-8, especially in aqueous environments. A number of studies have been conducted to investigate the breakdown process of the ZIF-8 structure in water; which is known as the hydrolysis of ZIF-8. However, those studies reported different opposing experimental observations on the role of water on the structural stability of ZIF-8, which created obscurity in understanding this phenomenon. This study explored the effects of different water-derived species on the structural stability of ZIF-8; specifically, examined the effects of only water and water with different oxidative species that may be generated by water molecules' dissociation under external energy or catalyst presence. To this effort, we experimentally probed the physical and chemical structural changes of ZIF-8 in DI water and three different solutions of hydrogen peroxides (H 2 O 2 ); taking H 2 O 2 as the source of oxidative species. To assess the changes in elemental compositions, chemical bonds, functional groups, crystal structure, and morphology, all the samples were analyzed by X-ray photoelectron spectroscopy (XPS), energy-dispersive x-ray (EDX) spectroscopy, Fourier Transform Infrared (FTIR) spectroscope, X-ray diffractometer (XRD), and scanning electron microscope (SEM). Significant structural changes in ZIF-8 occurred mainly in the presence of oxidative species in water. Notably, oxidative species' concentration exceeding 1 M heightened the deformation of the ZIF-8 structure.

36 MATERIALS SCIENCE↗