Search NASA⌕ Search

SEARCH · Search NASA

Results for “input estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Measurement of the ionization response of amorphous selenium with 122 keV γ rays

In this work, we performed a measurement of the ionization response of 200 μm-thick amorphous selenium (aSe) layers under drift electric fields of up to 50 V/μm. The aSe target was exposed to ionizing radiation from a 57 Co radioactive source and the ionization pulses were recorded with high resolution. Using the spectral line from the photoabsorption of 122 keV γ rays, we measured the charge yield in aSe and the line width as a function of drift electric field. From a detailed microphysics simulation of charge generation and recombination in aSe, we conclude that the strong dependence of recombination on the ionization track density provides the dominant contribution to the energy resolution in aSe. These results provide valuable input to estimate the sensitivity of a proposed next-generation search for the neutrinoless ββ decay of 82 Se that aims to employ imaging sensors with an active layer of aSe. We estimate the RMS line width of the integrated ionization signal from neutrinoless ββ decay events (of deposited energy 3 MeV) to be 2.0% for a drift field of 50 V/μm. The energy resolution can be improved to 1% by correcting for the charge yield as a function of ionization density along the imaged electron tracks.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effects of cluster particle correlations on local parity violation observables

We investigate effects of cluster particle correlations on two- and three-particle azimuth correlator observables sensitive to local strong parity violation. We use two-particle angular correlation measurements as inputs and estimate the magnitudes of the effects with straightforward assumptions. We found that the measurements of the azimuth correlator observables in the STAR experiment can be entirely accounted for by cluster particle correlations together with a reasonable range of cluster anisotropy in nonperipheral collisions. Our result suggests that new physics, such as local strong parity violation, may not be required to explain the correlator data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Light pseudoscalar meson and heavy meson scattering lengths

We have performed a systematical calculation of the pion ({pi}, K, {eta}) and heavy pseudoscalar meson S-wave scattering lengths up to O(p{sup 3}) in the chiral perturbation theory in the heavy quark symmetry limit. With the three scattering lengths from the lattice simulations as input we estimate the unknown low-energy constants. Then we predict all the other unmeasured scattering lengths. The analytical expressions and predictions may be helpful to future investigations. Especially we note that the DK scattering length is positive. Therefore their interaction is attractive, which helps to lower the mass of the bare charm-strange scalar state in the quark model through the couple-channel effect.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Efficient and Collision-Free Anticipative Cruise Control in Randomly Mixed Strings

Connected intelligent vehicle following can improve safety and efficiency compared to today's road transport, but real traffic in the near future will not provide an ideal setting for its deployment. Unconnected human-driven vehicles will follow variable behavior patterns that combine with differences in dynamic capability to create heterogeneous scenarios. In this paper, connected automated vehicles employ model predictive control for following in traffic that may include both heavy and passenger vehicles at quasi-random positions. Adding further realism, some quasi-randomly mixed vehicles are completely unconnected and equipped with the reactive intelligent driver model using pseudorandom parameters. A mixed-integer quadratic programming formulation adapts the predictive algorithm to diverse powertrain operating point constraints. The preceding vehicle's control input is estimated from velocity and brake light observations and used to probabilistically generate a preview for the ego vehicle. Here, a terminal constraint designed using particle kinematics prevents collisions due to shortsightedness. Results are simulated at various heavy and predictive vehicle concentrations in the presence of packet loss. Linear fuel economy improvements between 1.4% and 1.9% per 10% increase in predictive vehicle penetration rate are shown.

33 ADVANCED PROPULSION SYSTEMS↗

Superheavy elements and r-process

The probability for the production of superheavy elements in the astrophysical r-process is discussed. The dependence of the estimated superheavy-element yields on input data is estimated. Preliminary calculations revealed that the superheavy-element yields at the instant of completion of the r-process may be commensurate with the uranium yield, but the former depend strongly on the models used to forecast the properties of beta-delayed, neutron-induced, and spontaneous fission. This study is dedicated to the 80th anniversary of V.S. Imshennik's birth.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DEPRECATED Turbine_CostSE (Turbine Cost Systems Engineering Model) [SWR-13-30]

DEPRECATED This repository has been archived by the owner since Jun 19, 2020. It is now read-only. Turbine_CostsSE is a DEPRECATED set of models for assessing the costs of a wind turbine. The first model is a new version of NREL's turbine Cost and Scaling Model that uses 2015 survey data to compute component mass properties from key turbine parameters such as rotor diameter, rated power and hub height. A second model is a new mass-to-cost model which takes the individual component masses as inputs to estimate each component costs with additional cost factors for assembly, overhead, and profits.

Dykes, Katherine↗

Diverse Super-Resolution (diversity_SR) [SWR-21-60]

Deep learning tools for enhancing the spatial resolution of wind data. The software is developed in Python using the TensorFlow deep learning package. Models for diversity super-resolution is provided. Included in the package are pretrained models with example code/data to perform the super-resolution as well as tools of training models for different enhancement- or data-types. The super-resolution is an inherently ill-conditioned problem, with multiple high-resolution fields plausibly mapping to the same coarse field. Considitional GANs provide a framework for generating a distribution of high-resolution realizations from a given low-resolution input. Stochastic estimation is used to inform the network of the expected degree and location of sub-grid diversity. The package includes a pretrained network to generate distributions of 10x-enhanced fields of wind data.

Glaws, Andrew↗

Development of a size reduction equation for woody biomass: The influence of branch wood properties on Rittinger's constant

Size reduction is an essential but energy-intensive process for preparing biomass for conversion processes. Three well-known scaling equations (Bond, Kick, and Rittinger) are used to estimate energy input for grinding minerals and food particles. Previous studies have shown that the Rittinger equation has the best fit to predict energy input for grinding cellulosic biomass. In the Rittinger equation, Rittinger's constant (k R ) is independent of the size of ground particles, yet we noted large variations in k R among similar particle size ranges. In this research, the dependence of k R on the physical structure and chemical composition of a number of woody materials was explored. Branches from two softwood species (Douglas fir and pine) and two hardwood species (aspen and poplar) were ground in a laboratory knife mill. The recorded data included power input, mass flow rate, and particle size before and after grinding. Nine material properties were determined: particle density, solid density (pycnometer and x-ray diffraction methods), microfibril angle, fiber coarseness, fiber length, and composition (lignin and cellulose glucan contents). The correlation matrix among the nine properties revealed high degrees of interdependence between properties. The k R value had the largest positive correlation (+0.60) with particle porosity across the species tested. As a result, particle density was strongly correlated with lignin content (0.85), microfibril angle (0.71), fiber length (0.87), and fiber coarseness (0.78). An empirical model relating k R to particle density was developed.

09 BIOMASS FUELS↗

Appendix C: Biomass Program inputs for FY 2008 benefits estimates

Document summarizes the results of the benefits analysis of EERE’s programs, as described in the FY 2008 Budget Request. EERE estimates benefits for its overall portfolio and nine Research, Development, Demonstration, and Deployment (RD3) programs.

09 BIOMASS FUELS↗