Search NASA⌕ Search

SEARCH · Search NASA

Results for “interchangeable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Observations of Interchange Between Acceleration and Thermalization Processes in Auroral Electrons

The results of high time-resolution measurements of energetic electrons in an auroral break up are presented. Electrons with energies from 500 eV to over 100 keV and pitch angles from 0 to 150 deg were detected with two detectors onboard sounding rocket 18:63 UE. Complete energy spectra were taken every 0.1 seconds. The procedure for cleaning and activating the BeCu dynodes of a small, rugged, high gain electron multiplier is described. A theoretical study of the energy-angular response of a spherical plate electrostatic analyzer is compared to experimental results. An energy spectrum unfolding technique which does not require the assumption of a histogram-type energy spectrum is presented. A method of determining sounding rocket orientation from the output of a single magnetometer is described.

Pongratz, M. B.↗
NASA NTRS1972

SM91: Observations of interchange between acceleration and thermalization processes in auroral electrons

Results from a Nike-Tomahawk sounding rocket flight launched from Fort Churchill are presented. The rocket was launched into a breakup aurora at magnetic local midnight on 21 March 1968. The rocket was instrumented to measure electrons with an electrostatic analyzer electron spectrometer which made 29 measurements in the energy interval 0.5 KeV to 30 KeV. Complete energy spectra were obtained at a rate of 10/sec. Pitch angle information is presented via 3 computed average per rocket spin. The dumped electron average corresponds to averages over electrons moving nearly parallel to the B vector. The mirroring electron average corresponds to averages over electrons moving nearly perpendicular to the B vector. The average was also computed over the entire downward hemisphere (the precipitated electron average). The observations were obtained in an altitude range of 10 km at 230 km altitude.

Pongratz, M.↗
NASA NTRS1976

Accretion onto magnetized neutron stars - Normal mode analysis of the interchange instability at the magnetopause

Results are reported for a linearized hydromagnetic stability analysis of the magnetopause of an accreting neutron star. The magnetosphere is assumed to be slowly rotating, and the plasma just outside the magnetopause is assumed to be weakly magnetized. The plasma layer is assumed to be bounded above by a shock wave and to be thin compared with the radius of the magnetosphere. Under these circumstances, the growing modes are shown to be localized in the direction parallel to the zero-order magnetic field, but the structure of the modes is still similar to the flute mode. An expression for the growth rate at each magnetic latitude is obtained in terms of the magnitude of the gravitational acceleration normal to the surface, the azimuthal mode number, the radius of the magnetosphere, the height of the shock above the magnetopause, and the effective Atwood number which embodies the stabilizing effects of favorable curvature and magnetic tension. The effective Atwood number is calculated, and the stabilizing effects of viscosity and aligned flow parallel to the magnetopause are discussed.

Arons, J.↗
NASA NTRS1983

Major questions on the interchange of thermal plasmas between the ionosphere and plasmasphere

It is for the plasmaspheric flux tube regions of the magnetospheric flux tubes that the greatest likelihood exists for a near-term, complete description of the plasma, since the magnetic field geometry is relatively well behaved and the plasma source and boundary conditions are specifiable with reasonable accuracy. It may be speculated that this emerging understanding may be useful in the study of the more complex dynamical behavior of plasma couplings within such other 'closed flux tube' geometries as the plasma sheet flux tubes, where ionospheric ions flow up to populate the flux tubes and precipitating particles from them produce the diffuse aurora.

Horwitz, J. L.↗
NASA NTRS1986

Computer code to interchange CDS and wave-drag geometry formats

A computer program has been developed on the PRIME minicomputer to provide an interface for the passage of aircraft configuration geometry data between the Rockwell Configuration Development System (CDS) and a wireframe geometry format used by aerodynamic design and analysis codes. The interface program allows aircraft geometry which has been developed in CDS to be directly converted to the wireframe geometry format for analysis. Geometry which has been modified in the analysis codes can be transformed back to a CDS geometry file and examined for physical viability. Previously created wireframe geometry files may also be converted into CDS geometry files. The program provides a useful link between a geometry creation and manipulation code and analysis codes by providing rapid and accurate geometry conversion.

Johnson, V. S.↗
NASA NTRS1987

Observational constraints on interchange models at Jupiter

Data from the Voyager plasma science instrument are used to set limits on transport models for the inner Jovian magnetosphere. The instrument has an effective time resolution for detecting changes in density of 0.24 s, which corresopnds to a spatial resolution of about 20 km (equal to the gyroradius of an oxygen ion) in the region just outside of Io. This resolution enables an upper limit of about 10 percent to be set on changes in density between adjacent magnetic flux tubes, which rules out transport models which invoke inward motion of near empty flux tubes to replace outward-moving flux tubes carrying Iogenic plasma.

Richardson, John D.↗
NASA NTRS1987

Collisional interchange instability. II - A comparison of the numerical simulations with the in situ experimental data

A two-dimensional model applicable to F region ionosphere plasma instabilities has been developed and described in a companion paper. Here the model is applied to equatorial F region irregularities and is tested against rocket and satellite data. As a diagnostic, simulated data sets are created which are similar to the one-dimensional measurements of plasma density performed by space probes and the Fourier transform of these data is taken in the same manner and used by the space experimentors. Unlike previous simulations of this phenomenon, an inherent anisotropy is found in the instability development which is mirrored in the in situ data. Evidence that the shallow spectral slopes which often characterize spread F rocket spectra near the F peak may be due to a change in the angle between the rocket velocity vector and the characteristic directions in the medium is presented.

Kelley, M. C.↗
NASA NTRS1993

Nuclear Propulsion Technical Interchange Meeting, volume 2

The purpose of the meeting was to review the work performed in fiscal year 1992 in the areas of nuclear thermal and nuclear electric propulsion technology development. These proceedings are an accumulation of the presentations provided at the meeting along with annotations provided by authors. The proceedings cover system concepts, technology development, and system modeling for nuclear thermal propulsion (NTP) and nuclear electric propulsion (NEP). The test facilities required for the development of the nuclear propulsion systems are also discussed.

Source record↗
NASA NTRS1993

Two pass method and radiation interchange processing when applied to thermal-structural analysis of large space truss structures

A method of efficient and automated thermal-structural processing of very large space structures is presented. The method interfaces the finite element and finite difference techniques. It also results in a pronounced reduction of the quantity of computations, computer resources and manpower required for the task, while assuring the desired accuracy of the results.

Warren, Andrew H.↗
NASA NTRS1952

Radiant-interchange Configuration Factors

A study is presented of the geometric configuration factors required for computing radiant heat transfer between opaque surfaces separated by a nonabsorbing medium and various methods of determining the configuration factors are discussed. Configuration-factor solutions available in the literature have been checked and the more complicated equations are presented as families of curves. Cases for point, line, and finite-area sources are worked out over a wide range of geometric proportions. These cases include several new configurations involving rectangles, triangles, and cylinders of finite length which are integrated and tabulated. An analysis is presented, in which configuration factors are employed of the radiant heat transfer to the rotor blades of a typical gas turbine under different conditions of temperature and pressure. (author)

Hamilton, D C :↗
NASA NTRS1993

AXAF FITS standard for ray trace interchange

A standard data format for the archival and transport of x-ray events generated by ray trace models is described. Upon review and acceptance by the Advanced X-ray Astrophysics Facility (AXAF) Software Systems Working Group (SSWG), this standard shall become the official AXAF data format for ray trace events. The Flexible Image Transport System (FITS) is well suited for the purposes of the standard and was selected to be the basis of the standard. FITS is both flexible and efficient and is also widely used within the astronomical community for storage and transfer of data. In addition, software to read and write FITS format files are widely available. In selecting quantities to be included within the ray trace standard, the AXAF Mission Support team, Science Instruments team, and the other contractor teams were surveyed. From the results of this survey, the following requirements were established: (1) for the scientific needs, each photon should have associated with it: position, direction, energy, and statistical weight; the standard must also accommodate path length (relative phase), and polarization. (2) a unique photon identifier is necessary for bookkeeping purposes; (3) a log of individuals, organizations, and software packages that have modified the data must be maintained in order to create an audit trail; (4) a mechanism for extensions to the basic kernel should be provided; and (5) the ray trace standard should integrate with future AXAF data product standards.

Hsieh, Paul F.↗
NASA NTRS1992

Interchangeable end effector tools utilized on the PFMA

An instrumented task board, used for measuring forces applied by the Protoflight Manipulator Arm (PFMA) to the task board, was fabricated and delivered to Marshall Space Flight Center. SRS Technologies phased out the existing IBM compatible data acquisition system, used with a instrumented task board, and integrated the force measuring electronic hardware in with the Macintosh II data acquisition system. The purpose of this change was to acquire all data with the same time tag, allowing easier and more accurate data reduction in addition to real-time graphics. A three-dimensional optical position sensing system for determining the location of the PFMA's end effect or in reference to the center of the instrumented task board was also designed and delivered under. An improved task board was fabricated which included an improved instrumented beam design. The modified design of the task board improved the force/torque measurement system by increasing the sensitivity, reliability, load range and ease of maintenance. A calibration panel for the optical position system was also designed and fabricated. The calibration method developed for the position sensors enhanced the performance of the sensors as well as simplified the installation and calibration procedures required. The modifications made under this effort expanded the capabilities of the task board system. The system developed determines the arm's position relative to the task board and measures the signals to the joints resulting from the operator's control signals in addition to the task board forces. The software and hardware required to calculate and record the position of the PFMA during the performance of tasks with the instrumented task board were defined, designed and delivered to MSFC. PFMA joint input signals can be measured from a breakout box to evaluate the sensitivity or response of the arm operation to control commands. The data processing system provides the capability for post processing of time-history graphics and plots of the PFMA positions, the operator's actions, and the PFMA servo reactions in addition to realtime force and position sensor data presentation.

Cody, Joe↗
NASA NTRS1993

Electronic document interchange

Evaluation and implementation tasks for the NASA-wide electronic publishing system known as networked DOCUTECH are examined and the system configuration is graphically depicted. DOCUTECH provides the capability to print on demand electronically stored documents. Use of the electronic publishing system in several applications has generated productivity gains ranging from 33 to 88 percent at geographically dispersed NASA centers.

Tuey, Dick↗
NASA NTRS1993

Electronic document interchange

The operational impact of various storage formats related to electronic publishing of documents in the NASA Scientific and Technical Information (STI) Program is discussed. Questions are raised about the development of full text, surrogate, and hybrid storage formats. It appears that the eventual configuration will contain a mix of storage formats based on user demand.

Erwin, Jim↗
NASA NTRS1997

Interchange for Joint Research Entitled: Measurement of Stable Nitrogen and Sulfur Isotopes

Viking measurements of the Martian atmosphere indicate a value of N-15/N-14 which is markedly greater than that found in Earth's atmosphere. These isotopic measurements provide a powerful diagnostic tool which may be used to derive valuable information regarding the past history of Mars and they have been used to place important constraints on the evolution of Mars' atmosphere. Initial partial pressures of nitrogen, outgassing rates, and integrated deposition of nitrogen into minerals have been calculated from this important atmospheric data (McElroy et al., 1976 and 1977; Fox and Dalgarno, 1983). The greater precision obtained in laser spectrometer isotopic measurements compared to the Viking data will greatly improve these calculated values. It has also been proposed that the N-15/N-14 value in Mars' atmosphere has increased monotonically over time (McElroy et al., 1977; Fox and Dalgarno, 1983; Wallis, 1989) owing to preferential escape of atmospheric 14N to space. Nitrogen isotopic ratios might be used to identify relatively ancient crustal rocks (R. Mancinelli, personal communication), and perhaps determine relative aces of surface samples. As a first step in successfully measuring nitrogen isotopes optically we have demonstrated the measurement of 15NI14N to a precision of 0.1% (See Figures 1-4) using a tunable diode laser and an available gas (N-,O) with spectral lines in the 2188 cm-1 region. The sample and reference gas cells contained gases of identical isotopic composition so that the 15NI14N absorption ratio determined from the sample cell, when divided by the 15NI14N absorption ratio determined from the reference cell, should yield an ideal value of unity. The average measured value of this "ratio of ratios" was 0.9983 with a standard deviation (20 values) of 0.0010. This corresponds to a precision of 0.1% (1 per mil) for nitrogen isotopes, a value sufficiently precise to provide important isotopic data of interest to exobiologists. The precision presently attainable in gases is sufficient to permit the instrument to be used in the measurement of isotopic ratios of interest to exobiologists as well as geologists and planetary scientists.

Becker, Joseph F.↗
NASA NTRS1999

Interchange for Joint Research Entitled: Miniature Laser Spectrometer for Stable Isotope Measurements

As a first step in successfully measuring carbon isotopes optically we have previously demonstrated the measurement of C-13/C-12 to a precision of 0.1% using a tunable diode laser and CO2 spectral lines in the 2300/cm spectral region. This precision of 0.1% (1 per mil) for carbon isotopes is a value sufficiently precise to provide important isotopic data of interest to astrobiologists. The precision presently attainable in gases is sufficient to permit our instrument to be used in the measurement of isotopic ratios of interest to astrobiologists as well as geologists and planetary scientists. A small stable isotope laser spectrometer with a 10 cm path gas cell was designed and constructed. The cell was integrated with a liquid nitrogen cooled tunable diode laser and indium antimonide detector for evaluation. Using the small gas cell, preliminary measurements of 13C/12C in CO2 were made employing single-beam sequential acquisitions of the required spectral data. The results indicate an accuracy of 0.1% which is sufficiently high to make meaningful measurements of martian samples. In addition, improvements in the spectrometer gas handling system have been made to markedly reduce C-13/C-12 isotopic fractionation during sample gas cell loading which we expect will lead to further improvements in precision and accuracy. An important part of making isotopic ratio measurements in solid samples using diode lasers is the conversion of the elements of interest to molecules that have absorption spectra in the mid-ir spectral range accessible by tunable diode lasers. In this project we have investigated the necessary sample preparation procedures to extract carbon, an element of astrobiological importance, from model soil compounds and to convert it to CO2, a molecule with appropriate optical absorption characteristics for reliable laser spectrometer isotopic ratio measurements of 13C/12C. We have considered calcium carbonate as a model for a component of the martian regolith, and we have formulated a simple heating protocol for extracting carbon in the form of CO2.

Becker, J. F.↗