Search NASA⌕ Search

SEARCH · Search NASA

Results for “interdiffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Anion Exchange of Ruddlesden–Popper Lead Halide Perovskites Produces Stable Lateral Heterostructures

Heterostructures of three-dimensional (3D) halide perovskites are unstable because of facile anion interdiffusion at halide interfaces. Two-dimensional (2D) Ruddlesden–Popper halide perovskites (RPPs) show suppressed and anisotropic ion diffu-sion that could enable stable RPP heterostructures, yet the direct and general growth of lateral RPP heterostructures remains challenging. Here we show that halide miscibility in RPPs decreases with perovskite layer thickness (n), enabling the for-mation of sharp halide lateral heterostructures from n = 1 and 2 RP lead iodide microplates via anion exchange with hydro-gen bromide vapor. In contrast, RPPs with n = 3 form more diffuse lateral heterojunctions, more similar to those in 3D perov-skites. The anion exchange behaviors are further modulated by the spacer and A-site cations in the RPP structures. These new insights, and kinetic studies of the exchange reactions, enable the preparation of lateral heterostructures from various n = 2 RPPs that are more stable against anion interdiffusion and degradation for potential device applications.

Roy, Chris R.↗

Study of surfactant mediated growth of Ni/V superlattices

The Ni/V multilayers are useful as soft x-ray mirrors, polarizers, and phase retarders. For these applications, it is necessary that the interfaces roughness and interdiffusion must be as small as possible. The V-on-Ni and Ni-on-V interfaces are asymmetric due to the difference in the surface free energy of Ni and V. In this work, we report Ag surfactant mediated growth of Ni/V superlattices prepared using ion beam sputter deposition technique. These superlattices were studied using x-ray and neutron scattering techniques. It was found that when added in an optimum amount, Ag surfactant results in reduced interface roughness and interdiffusion across the interfaces. Obtained results can be understood with the surfactant floating-off mechanism leading to a balance in the surface free energy of Ni and V.

36 MATERIALS SCIENCE↗

Effect of capping material on interfacial ferromagnetism in FeRh thin films

The role of the capping material in stabilizing a thin ferromagnetic layer at the interface between a FeRh film and cap in the nominally antiferromagnetic phase at room temperature was studied by x-ray magnetic circular dichroism in photoemission electron microscopy and polarized neutron reflectivity. These techniques were used to determine the presence or absence of interfacial ferromagnetism (FM) in films capped with different oxides and metals. Chemically stable oxide caps do not generate any interfacial FM while the effect of metallic caps depends on the element, showing that interfacial FM is due to metallic interdiffusion and the formation of a ternary alloy with a modified antiferromagnetic to ferromagnetic transition temperature.

36 MATERIALS SCIENCE↗

Transport properties of ultra-thin VO{sub 2} films on (001) TiO{sub 2} grown by reactive molecular-beam epitaxy

We report the growth of (001)-oriented VO{sub 2} films as thin as 1.5 nm with abrupt and reproducible metal-insulator transitions (MIT) without a capping layer. Limitations to the growth of thinner films with sharp MITs are discussed, including the Volmer-Weber type growth mode due to the high energy of the (001) VO{sub 2} surface. Another key limitation is interdiffusion with the (001) TiO{sub 2} substrate, which we quantify using low angle annular dark field scanning transmission electron microscopy in conjunction with electron energy loss spectroscopy. We find that controlling island coalescence on the (001) surface and minimization of cation interdiffusion by using a low growth temperature followed by a brief anneal at higher temperature are crucial for realizing ultrathin VO{sub 2} films with abrupt MIT behavior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photoluminescence probing of interface evolution with annealing in InGa(N)As/GaAs single quantum wells

The effects of thermal annealing on the interfaces of InGa(N)As/GaAs single quantum wells (SQWs) are investigated by excitation-, temperature-, and magnetic field-dependent photoluminescence (PL). The annealing at 750 °C results in more significant blueshift and narrowing to the PL peak than that at 600 °C. Each of the PL spectra can be reproduced with two PL components: (i) the low-energy component (LE) keeps energetically unchanged, while the high-energy component (HE) moves up with excitation and shows at higher energy for the In{sub 0.375}Ga{sub 0.625}As/GaAs but crosses over with the LE at a medium excitation power for the In{sub 0.375}Ga{sub 0.625}N{sub 0.012}As{sub 0.988}/GaAs SQWs. The HE is broader than the corresponding LE, the annealing at 750 °C narrows the LE and HE and shrinks their energetic separation; (ii) the PL components are excitonic, and the InGaNAs shows slightly enhanced excitonic effects relative to the InGaAs SQW; (iii) no typical S-shape evolution of PL energy with temperature is detectable, and similar blueshift and narrowing are identified for the same annealing. The phenomena are mainly from the interfacial processes. Annealing improves the intralayer quality, enhances the interfacial In-Ga interdiffusion, and reduces the interfacial fluctuation. The interfacial interdiffusion does not change obviously by the small N content and hence similar PL-component narrowing and blueshift are observed for the SQWs after a nominally identical annealing. Comparison with previous studies is made and the PL measurements under different conditions are shown to be effective for probing the interfacial evolution in QWs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of annealing on exchange stiffness of ultrathin CoFeB film with perpendicular magnetic anisotropy

The effect of annealing on the exchange stiffness of ultrathin CoFeB films with perpendicular magnetic anisotropy was investigated through the observation of magnetic domain structures by magneto-optic Kerr-effect microscopy. A significant reduction of the exchange stiffness after an annealing process was observed, which is in striking contrast to a previous report that studied thick CoFeB films with in-plane magnetic anisotropy. Our results suggest that interdiffusion of non-magnetic atoms from the adjacent layer into CoFeB layer reduces the exchange stiffness, which explains the difference between the annealing effect on ultrathin and the thick CoFeB films. Thus, it is critical to prevent annealing-induced interdiffusion in order to suppress undesired sub-volume switching that degrades thermal stability of a free-layer in spin-transfer torque magnetic random access memory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strain dynamics during La{sub 2}O{sub 3}/Lu{sub 2}O{sub 3} superlattice and alloy formation

The dynamics of strain relaxation and intermixing during molecular beam epitaxy of La{sub 2}O{sub 3} and Lu{sub 2}O{sub 3} superlattices and alloys consisting of both binaries on Si(111) have been studied by real-time in situ grazing incidence x-ray diffraction and high resolution transmission electron microscopy. The presence of both hexagonal and cubic polymorphs of La{sub 2}O{sub 3} influences the epitaxial formation within the superlattice. The process of strain relaxation is closely related to the presence of a (La,Lu){sub 2}O{sub 3} alloy adopting a cubic symmetry. It is formed by interdiffusion of La and Lu atoms reducing internal lattice mismatch within the superlattice. An interface thickness dominated by interdiffusion regions of about 3 monolayers is determined by high-angle annular dark field scanning transmission electron microscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coexistence and Coupling of Zero-Dimensional, Two-Dimensional and Continuum Resonances in Nanostructures

Quantum dots (QDs) embedded in a matrix exhibit a coexistence of 'zero-dimensional' (0D) bound electron and hole states on the dot with 'three-dimensional' (3D) continuum states of the surrounding matrix. In epitaxial QDs one encounters also 'two-dimensional' (2D) states of a quantum well-like supporting structure (wetting layer). This coexistence of 0D, 2D, and 3D states leads to interesting electronic consequences explored here using multiband atomistic pseudopotential calculations. We distinguish strained dots (InAs in GaAs) and strain-free dots (InAs in GaSb) finding crucial differences: in the former case 'potential wings' appear in the electron confining potential in the vicinity of the dot. This results in the appearance of localized electronic states that lie above the threshold of the 3D continuum. Such resonances are 'strain-induced localized states' (SILSs) appearing in strained systems, whereas in strain-free systems the dot resonances in the continuum are the usual 'virtual bound states' (VBSs). The SILSs were found to occur regardless of the thickness of the wetting layer and even in interdiffused dots, provided that the interdiffusion length is small compared to the QD size. Thus, the SILSs are well isolated from the environment by the protective potential wings, whereas the VBSs are strongly interacting. These features are seen in our calculated intraband as well as interband absorption spectra. Furthermore, we show that the local barrier created around the dot by these potential wings suppresses the 0D-2D (dot-wetting layer) hybridization of the electron states. Consequently, in contrast to findings of simple model calculations of envelope function, 0D-to-2D 'crossed transitions' (bound hole-to-wetting layer electron) are practically absent because of their spatially indirect character. On the other hand, since no such barrier exists in the hole confining potential, a strong 0D-2D hybridization is present for the hole states. We show this to be the source for the strong 2D-to-0D crossed transitions determined experimentally.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Reducing orbital occupancy in VO 2 suppresses Mott physics while Peierls distortions persist

The characteristics of the cooperative Mott-Peierls metal-insulator transition (MIT) of VO 2 can be altered by employing epitaxial strain. While the most commonly used substrate for this purpose is isostructural rutile TiO 2 , thin films often suffer from interdiffusion of Ti ions near the interface. Exploiting this phenomena, we investigate the nature of interfacial V 4+ /Ti 4+ cation intermixing and its effects on the MIT using scanning transmission electron microscopy with electron energy loss spectroscopy (STEM-EELS), soft x-ray absorption spectroscopy (XAS), and hard x-ray photoelectron spectroscopy (HAXPES), along with supporting density functional theory (DFT) calculations. We find that the reduced orbital occupancy in highly Ti incorporated VO 2 is responsible for suppressing the MIT. Interdiffused films are found to be metallic at all measured temperatures, despite a resolute dimerization inferred from x-ray absorption data at lower temperatures. Here our results demonstrate that the Mott physics can be suppressed in doped VO 2 , while a lattice dimerization remains thermodynamically favorable.

36 MATERIALS SCIENCE↗

CdS/CdTe Solar Cells Containing Directly-Deposited CdSxTe1-x Alloy Layers

A CdS{sub x}Te{sub 1-x} layer forms by interdiffusion of CdS and CdTe during the fabrication of thin-film CdTe photovoltaic (PV) devices. The CdS{sub x}Te{sub 1-x} layer is thought to be important because it relieves strain at the CdS/CdTe interface that would otherwise exist due to the 10% lattice mismatch between these two materials. Our previous work [1] has indicated that the electrical junction is located in this interdiffused CdS{sub x}Te{sub 1-x} region. Further understanding, however, is essential to predict the role of this CdS{sub x}Te{sub 1-x} layer in the operation of CdS/CdTe devices. In this study, CdS{sub x}Te{sub 1-x} alloy films were deposited by radio-frequency (RF) magnetron sputtering and co-evaporation from CdTe and CdS sources. Both RF-magnetron-sputtered and co-evaporated CdS{sub x}Te{sub 1-x} films of lower S content (x<;0.3) have a cubic zincblende (ZB) structure akin to CdTe, whereas those of higher S content have a hexagonal wurtzite (WZ) structure like that of CdS. Films become less preferentially oriented as a result of a CdCl{sub 2} heat treatment (HT) at {approx}400 C for 5 min. Films sputtered in a 1% O{sub 2}/Ar ambient are amorphous as deposited, but show CdTe ZB, CdS WZ, and CdTe oxide phases after a CdCl{sub 2} HT. Films sputtered in O{sub 2} partial pressure have a much wider bandgap than expected. This may be explained by nanocrystalline size effects seen previously [2] for sputtered oxygenated CdS (CdS:O) films. Initial PV device results show that the introduction of a directly-deposited CdS{sub x}Te{sub 1-x} alloy layer into the device structure produces devices of comparable performance to those without the alloy layer when a CdCl{sub 2} HT is performed. Further investigation is required to determine whether the CdCl{sub 2} heat treatment step can be altered or eliminated through direct deposition of the alloy layer.

14 SOLAR ENERGY↗

In Situ Observations of Templated Grain Growth in (Na 0.5 K 0.5 ) 0.98 Li 0.02 NbO 3 Piezoceramics: Texture Development and Template-Matrix Interactions

Nucleation, texture development, and phase equilibria were observed during templated grain growth (TGG) of (Na 0.5 K 0.5 ) 0.98 Li 0.02 NbO 3 (NKLN) via in situ X-ray diffraction (XRD). Initially, NaNbO 3 templates and NKLN matrix powder exist as distinct phases with unique lattice parameters. Above 850 °C, the templates and matrix begin to react via interdiffusion as characterized by an increase in diffuse scattering between the NaNbO 3 and NKLN peaks. This process intensifies immediately prior to template growth, leading to merging of diffraction peaks for these two phases. TGG in this system is thus homoepitaxial in nature as it occurs after the NKLN matrix and NaNbO 3 templates form a solid solution. The degree of alignment in the matrix phase is quantified in situ using the March-Dollase parameters r and f. The degree of orientation of the textured NKLN mirrors the initial alignment of the template particles (r ~ 0.3), while the texture fraction f increases from 0.04 to ~0.67 after 3 h at 1138 °C. This increase in texture fraction follows n = 1/3 power law kinetics consistent with liquid-phase-assisted normal grain growth on plate-like templates. As the observed template-matrix interdiffusion and the onset of texture development proceed extremely rapidly, this work demonstrates the utility of in situ XRD for observing details of TGG that cannot easily be seen via ex situ methods.

36 MATERIALS SCIENCE↗

Influence of Surface Preparation on Scanning Kelvin Probe Microscopy and Electron Backscatter Diffraction Analysis of Cross Sections of CdTe/CdS Solar Cells: Preprint

In this work we investigated different methods to prepare cross sections of CdTe/CdS solar cells for EBSD and SKPM analyses. We observed that procedures used to prepare surfaces for EBSD are not suitable to prepare cross sections, and we were able to develop a process using polishing and ion-beam milling. This process resulted in very good results and allowed us to reveal important aspects of thecross section of the CdTe film. For SKPM, polishing and a light ion-beam milling resulted in cross sections that provided good data. We were able to observe the depletion region on the CdTe film and the p-n junction as well as the interdiffusion layer between CdTe and CdS. However, preparing good-quality cross sections for SKPM is not a reproducible process, and artifacts are often observed.

14 SOLAR ENERGY↗

A Novel Low-Temperature Fiffusion Aluminide Coating for Ultrasupercritical Coal-Fried Boiler Applications

An ultrasupercritical (USC) boiler with higher steam temperature and pressure is expected to increase the efficiency of the coal-fired power plant and also decrease emissions of air pollutants. Ferritic/martensitic alloys have been developed with good creep strength for the key components in coal-fired USC plants. However, they typically suffer excessive steam-side oxidation, which contributes to one of main degradation mechanisms along with the fire-side corrosion in coal-fired boilers. As the steam temperature further increases in USC boilers, oxidation of the tube internals becomes an increasing concern, and protective coatings such as aluminide-based diffusion coatings need to be considered. However, conventional aluminizing processes via pack cementation or chemical vapor deposition are typically carried out at elevated temperatures (1000-1150 C). Thermochemical treatment of ferritic/martensitic alloys at such high temperatures could severely degrade their mechanical properties, particularly the alloy's creep resistance. The research focus of this project was to develop an aluminide coating with good oxidation resistance at temperatures {le} 700 C so that the coating processing would not detrimentally alter the creep performance of the ferritic/martensitic alloys. Nevertheless, when the aluminizing temperature is lowered, brittle Al-rich intermetallic phases, such as Fe{sub 2}Al{sub 5} and FeAl{sub 3}, tend to form in the coating, which may reduce the resistance to fatigue cracking. Al-containing binary masteralloys were selected based on thermodynamic calculations to reduce the Al activity in the pack cementation process and thus to prevent the formation of brittle Al-rich intermetallic phases. Thermodynamic computations were carried out using commercial software HSC 5.0 for a series of packs containing various Cr-Al binary masteralloys. The calculation results indicate that the equilibrium partial pressures of Al halides at 700 C were a function of Al content in the Cr-Al alloys. Cr-25Al and Cr-15Al were chosen as the masteralloys in the pack cementation process. In contrast to pure Al masteralloy which led to the formation of Fe{sub 2}Al{sub 5} coatings at 650 C, a coating consisting of a thin Fe{sub 2}Al{sub 5} outer layer and an FeAl inner layer was formed at 700 C with the Cr-25Al masteralloy. By switching to the Cr-15Al masteralloy, thin FeAl coatings ({approx}12 {micro}m) containing < 50 at.% Al were achieved at 700 C. The effect of the amount of masteralloys on coating growth was also studied by employing packs containing 2NH{sub 4}Cl-x(Cr-15Al)-(98-x)Al{sub 2}O{sub 3}, where x = 10, 20, 30, 40, 50, 60, and 70 wt.%. It was noticed that when the Cr-15Al masteralloy was increased from 10 to 40 wt.% in the pack, both coating thickness and surface Al content increased, suggesting that gas phase kinetics played an important role in Al deposition. However, with further increase of the masteralloy, solid state diffusion became the rate-limiting factor. The long-term oxidation performance of the aluminide coatings synthesized at 700 C with Cr-25Al and Cr-15Al masteralloys was evaluated in the water vapor environment at 650-700 C. The low-temperature pack coatings demonstrated excellent oxidation resistance at 650 C in humid air after {approx}1.2 yr testing. Longer lifetimes can be expected for these thin coatings due to minimal interdiffusion at this testing temperature. Exposure at 700 C was conducted to accelerate coating failure via increased interdiffusion of Al with the substrate alloy. The coatings also exhibited good oxidation protection up to 6,000-8,000 h at 700 C, with longer testing needed for coating failure to occur. Furthermore, the oxidation results indicate that in addition to the Al reservoir (as determined by the Al content and coating thickness), the initial coating surface quality had a significant impact on the oxidation behavior. In addition, the effect of various pack aluminide coatings on the creep resistance of coated T91 was investigated. Three representative types of coatings with different thicknesses, Al concentrations and phase constituents were included in the creep test. The creep experiments were performed at 650 C in air at uniaxial stress levels of 100-120 MPa. The thick aluminide coating made at 1050 C showed a considerable reduction ({approx} 42%) in the creep rupture life of the coated alloy, due to the decrease of the load-bearing section. In contrast, the low-temperature thin coatings developed in this project did not significantly reduce the creep resistance of the coated T91 alloy, particularly the thin FeAl coating synthesized at 700 C using the Cr-15Al masteralloy.

36 MATERIALS SCIENCE↗

Enhanced Densification of SDC Barrier Layers

This technical report explores the Enhanced Densification of SCD Barrier Layers A samaria-doped ceria (SDC) barrier layer separates the lanthanum strontium cobalt ferrite (LSCF) cathode from the yttria-stabilized zirconia (YSZ) electrolyte in a solid oxide fuel cell (SOFC) to prevent the formation of electrically resistive interfacial SrZrO 3 layers that arise from the reaction of Sr from the LSCF with Zr from the YSZ. However, the sintering temperature of this SDC layer must be limited to 1200°C to avoid extensive interdiffusion between SDC and YSZ to form a resistive CeO 2 -ZrO 2 solid solution. Therefore, the conventional SDC layer is often porous and therefore not as impervious to Sr-diffusion as would be desired. In the pursuit of improved SOFC performance, efforts have been directed toward increasing the density of the SDC barrier layer without increasing the sintering temperature. The density of the SDC barrier layer can be greatly increased through small amounts of Cu-doping of the SDC powder together with increased solids loading and use of an appropriate binder system in the screen print ink. However, the resulting performance of cells with these barrier layers did not exhibit the expected increase in accordance with that achieved with the prototypical PLD SDC layer. It was determined by XRD that increased sinterability of the SDC also results in increased interdiffusivity between the SDC and YSZ, resulting in formation of a highly resistive solid solution.

30 DIRECT ENERGY CONVERSION↗

Impurity Diffusion Coefficients of Al and Zn in Mg Determined from Solid-to-Solid Diffusion Couples

Increasing use and development of lightweight Mgalloys have led to the desire for more fundamental research in and understanding of Mg-based systems. As property enhancing components, Al and Zn are two of the most important and common alloying elements for Mg-alloys. We have investigated the concentration dependent interdiffusion of Al and Zn in Mg using diffusion couples of pure polycrystalline Mg mated to Mg solid solutions containing either <9 at.% Al or <3 at.% Zn. Concentration profiles were determined by electron micro-probe microanalysis of the diffusion zone. The interdiffusion coefficients were determined by the classical Boltzmann-Matano method within the Mg solid solution. As the concentration of Al or Zn approaches the dilute ends, we employ an analytical approach based on the Hall method to estimate the impurity diffusion coefficients. Results of Al and Zn impurity diffusion in Mg are reported and compared to published impurity diffusion coefficients typically determined by thin film techniques.

Aluminum↗

SISGR - In situ characterization and modeling of formation reactions under extreme heating rates in nanostructured multilayer foils

Materials subjected to extreme conditions, such as very rapid heating, behave differently than materials under more ordinary conditions. In this program we examined the effect of rapid heating on solid-state chemical reactions in metallic materials. One primary goal was to develop experimental techniques capable of observing these reactions, which can occur at heating rates in excess of one million degrees Celsius per second. One approach that we used is x-ray diffraction performed using microfocused x-ray beams and very fast x-ray detectors. A second approach is the use of a pulsed electron source for dynamic transmission electron microscopy. With these techniques we were able to observe how the heating rate affects the chemical reaction, from which we were able to discern general principles about how these reactions proceed. A second thrust of this program was to develop computational tools to help us understand and predict the reactions. From atomic-scale simulations were learned about the interdiffusion between different metals at high heating rates, and about how new crystalline phases form. A second class of computational models allow us to predict the shape of the reaction front that occurs in these materials, and to connect our understanding of interdiffusion from the atomistic simulations to measurements made in the laboratory. Both the experimental and computational techniques developed in this program are expected to be broadly applicable to a wider range of scientific problems than the intermetallic solid-state reactions studied here. For example, we have already begun using the x-ray techniques to study how materials respond to mechanical deformation at very high rates.

36 MATERIALS SCIENCE↗

Post-irradiation Examination Status for the BSU-269 Project

High-density uranium inter-metallic uranium silicide (U 3 Si 2 ) was initially considered as a potential advanced nuclear fuel for light water reactor (LWR) systems due to several advantages it demonstrated in thermophysical properties, chemical, and irradiation stability. In addition to understanding the basic thermophysical and mechanical properties of U 3 Si 2 under LWR irradiation conditions, it is important to assess its performance with advanced claddings such as FeCrAl, SiC, or conventional Zr-based claddings. Several aspects of the fuel cycle and fuel performance are being evaluated for U 3 Si 2 coupled with different types of claddings. To thoroughly characterize the U 3 Si 2 -cladding system, their chemical compatibilities and the potential for fuel-cladding chemical interaction (FCCI) must be addressed. Interdiffusion studies have been performed between U 3 Si 2 /Zry-4 and U 3 Si 2 /FeCrAl using diffusion couples. For the U 3 Si 2 /Zry-4 system, ZrSi 2 was the primary interdiffusion product observed at 800°C in addition to other secondary phases from the Zr alloying elements such as Fe and Cr. Low melting point U 6 Fe was also observed at 1000°C. For the U 3 Si 2 /FeCrAl system, at temperatures above 500°C, chemical diffusion Fe-U and Fe-U-Si was observed, increasing with rising temperatures. Although information from these non-irradiated tests is a fundamental first assessment, follow-up with focused irradiation tests is necessary. Irradiation can significantly alter the structure and evolution of the FCCI layers compared to the non-irradiated conditions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Fusion Blanket and Fuel Cycle Research at PNNL: FY22 Year-end Report

During the reporting period, research at PNNL focused on two tasks within the DOE Fusion Blanket and Fuel Cycle Program. Research on Task 1, Tritium Extraction from Pb-Li and He Using a Vacuum Permeator, focused on atomistic modeling to better understand tritium transport in Pd-coated V vacuum permeators. As a lower cost alternative to Pd permeators, thin coatings of Pd (or other noble metals) can be deposited over a substrate like V. However, the permeation performance of composite metal membranes degrades over time, due to the formation of intermetallics at the coating-substrate interface. Computational studies were performed to better understand tritium transport through these Pd-V intermetallics. The results of the FY22 Pd-V modeling study were recently submitted for publication in Computational Materials Science and presented at the Technology of Fusion Energy conference. Future work in this area will focus on interdiffusion barriers to prevent intermetallic formation that is deleterious to tritium transport. There are opportunities for collaboration with researchers at the Colorado School of Mines, who are manufacturing and testing candidate interdiffusion barriers. Research on Task 3, Solid Breeder Materials, included ion irradiation and post-irradiation characterization of lithium orthosilicate (Li 4 SiO 4 ) and lithium metasilicate (Li 2 SiO 3 ) to improve fundamental understanding of irradiation effects, in combination with atomistic modeling focused on the energetics of He clustering in these two ceramic phases. The results of the study suggested that the Li 4 SiO 4 phase, which is more desirable as a solid breeder due to its higher Li density, was amorphized during ion irradiation while the Li 2 SiO 3 phase appeared to be more resistant to irradiation damage. It is possible that Li loss contributed to the poor irradiation performance of the Li 4 SiO 4 , and some thoughts are provided regarding coatings that could be applied to solid breeders like this to prevent Li loss at elevated temperature while not hindering tritium diffusion. The results of the FY22 ion irradiation study were recently submitted for publication in Journal of Nuclear Materials and presented at the 22nd International Conference on Ion Beam Modification of Materials. Future work in this area will focus on Li-rich ceramics such as Li 5 AlO 4 and Li 8 ZrO 6 that have high Li density and should provide rapid tritium release based on previous work with less Li-rich ceramics.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗