Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic association”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Surface Reactivity Analysis of the Crude Oil–Brine–Limestone Interface for a Comprehensive Understanding of the Low-Salinity Waterflooding Mechanism

Low-salinity waterflooding (LSWF) has proven to improve oil recovery in carbonate formations through rock wettability alteration, although the underlying mechanism remains elusive. Multivalent ionic exchange and calcite dissolution have usually been investigated using geochemical analysis in secondary coreflooding. In this work, coreflooding, in tertiary mode, coupled with a surface reactivity analysis approach was employed to investigate the interplay of wettability alteration mechanisms such as mineral dissolution, electrostatic bond attraction, and the effect of pH at in situ conditions. Improved oil recovery (IOR) in tertiary mode observed by coreflooding in Indiana limestone rocks showed an ionic strength dependence, that is, reducing brine ionic strength resulted in an increase in oil recovery. Coreflooding results showed that the seawater and low-salinity brines deprived of Mg 2+ ions resulted in the lowest IOR in tertiary mode, indicating the significance of Mg 2+ on IOR in limestone rocks. Similar results were observed through the contact angle measurement showing the limestone rock wettability state dependence on ionic strength and the effect of Mg2+ ions. Surface reactivity analysis showed an increase in solution pH, Ca 2+ and Mg 2+ ions concentration in the effluent solution from the coreflooding in tertiary mode using low salinity brines (about 40 and 20% increase in the effluent composition for Ca 2+ and Mg 2+ , respectively). These changes in solution composition were used to calculate the in situ oil–brine and rock–brine zeta potential using a validated surface complexation model, showing the changes of zeta potential as brine is injected into limestone rocks. The results show that using seawater-like brine in tertiary mode resulted in no mineral dissolution or ionic exchange. However, improved oil recovery (IOR) using such seawater-like brine was due to wettability alteration caused by reduced electrostatic bond attraction associated with Mg 2+ ions [from 2.6 × 10 –13 (mol/m 2 ) 2 for formation water salinity to 1.5 × 10 –13 (mol/m 2 ) 2 for seawater salinity]. Using low-salinity brines in tertiary mode improved oil recovery by mineral dissolution, resulting in oil desorption and an increase in solution pH. Finally, the increase in solution pH also resulted in reduced electrostatic bond attraction which lead to rock wettability alteration using low-salinity brines.

04 OIL SHALES AND TAR SANDS↗
NASA NTRS1974

Temperature responses of exercizing dogs to infusion of electrolytes

The effect of infusions with solutions of various ionic and osmotic composition on exercise temperature responses was studied in dogs who do not regulate their temperature by sweating. The results suggest an association between plasma Na+ and Ca++ level within the normal physiological range and the control of body temperature during exercise.

Greenleaf, J. E.↗
NASA NTRS1992

Determination of organic carbon and ionic accountability of various waste and product waters derived from ECLSS water recovery tests and Spacelab humidity condensate

The development of a closed-loop water recovery system for Space Station Freedom involves many technical challenges associated with contaminant removal. Attention is presently given to the characterization of contaminants constituting total organic carbon (TOC), and to the Hubaux and Vos (1970) statistical model for low level TOC that has been employed. A tabulation is given for TOC accountability in the case of both potable and hygiene waters.

Carter, Donald L.↗
DOE OSTI2022

An overview of cobalt-free, nickel-containing cathodes for Li-ion batteries

The need for high-energy, low-cost batteries is projected to grow dramatically in the next decade due to electrification of the transportation market. Such demands are straining Li-ion supply chains for critical materials including lithium, nickel, and cobalt. Price instability, environment toxicity, and limits in the absolute supply lead to great concern for the continued use of cobalt. Similar to cobalt, the required grade of nickel for batteries, known as Class 1 nickel, has also been declining due to geological scarcity and low incentive prices. Herein, this review summarizes alternative cathode chemistries with no cobalt and reduced nickel content for high-energy Li-ion batteries targeting sustainable growth in the electric vehicle market. Further, the primary challenges associated with each material system are generally classified as being related to four common categories: (1) ion instability during charging, (2) poor electronic conductivity, (3) poor ionic conductivity, and (4) poor thermal stability.

25 ENERGY STORAGE↗
NASA NTRS1975

A photoionization study of the formation of CO2/+/ by reaction of excited O2/+/ ions with CO

The production of CO2(+) by the ion-molecule reaction O2(+) + CO yields CO2(+) + O has been investigated using a photoionization mass spectrometer. The photoionization efficiency for production of CO2(+) by this reaction was measured from threshold at 924 A (13.42 eV) to 650 A (19.07 eV). The appearance potential corresponds to reaction of ground vibronic O2(+) ions formed in the nu-prime = 6 level. The high-vibrational-level ions of the ground ionic state are most likely produced by autoionization of O2. At wavelengths shorter than 760 A, there is a large increase in the reaction cross section associated with formation of ions in the metastable state. The peak reaction cross section occurs at 720 A.

Ajello, J. M.↗
NASA NTRS2014

Expanding the REE Partitioning Database for Lunar Materials

Positive europium anomalies are ubiquitous in the plagioclase-rich rocks of the lunar highlands, and complementary negative Eu anomalies are found in most lunar basalts. This is taken as evidence of a large-scale differentation event, with crystallization of a global-scale lunar magma ocean (LMO) resulting in a plagioclase flotation crust and a mafic lunar interior from which mare basalts were later derived. However, the extent of the Eu anomaly in lunar rocks is variable. Some plagioclase grains in a lunar impact rock (60635) have been reported to display a negative Eu anomaly, or in some cases single grains display both positive and neagtive anomalies. Cathodoluminescence images reveal that some crystals have a negative anomaly in the core and positive at the rim, or vice versa, and the negative anomalies are not associated with crystal overgrowths. Oxygen fugacity is known to affect Eu partitioning into plagioclase, as under low fO2 conditions Eu can be divalent, and has an ionic radius similar to Ca2+ - significant in lunar samples where plagioclase compositions are predominantly anorthitic. However, there are very few experimental studies of rare earth element (REE) partitioning in plagioclase relevant to lunar magmatism, with only two plagioclase DEu measurements from experiments using lunar materials, and little data in low fO2 conditions relevant to the Moon. We report on REE partitioning experiments on lunar compositions. We investigate two lunar basaltic compositions, high-alumina basalt 14072 and impact melt breccia 60635. These samples span a large range of lunar surface bulk compositions. The experiments are carried out at variable fO2 in 1 bar gas mixing furnaces, and REE are analysed by and LA-ICP-MS. Our results not only greatly expand the existing plagioclase DREE database for lunar compositions, but also investigate the significance of fO2 in Eu partitioning, and in the interpretation of Eu anomalies in lunar materials.

Rapp, Jennifer F.↗
DOE OSTI2021

Thermochemistry of sodium rare earth ternary fluorides, NaREF 4

Sodium rare earth fluorides, NaREF 4 (RE = rare earth), are used as luminescent materials for light emission and biomedical applications and are important compositions for extracting and separating RE elements. Solution calorimetric measurements of a series of β-structured NaREF 4 (Na 1.5 RE 1.5 F 6 ) phases with various RE elements determined their heats of formation. Though the lattice contracts from light to heavy RE elements, NaREF 4 compounds show more exothermic enthalpies of formation from binary components with the decrease of RE 3+ radii, contrary to behavior seen in most RE oxide ternary compounds. Furthermore, by constructing Born–Haber cycles, the different slopes of lines relating lattice energies to lattice parameters in binary and ternary fluorides appear to be the reason for this reverse trend, which can be associated with changes in the coordination number of RE cations. These trends and the metastability of sodium light RE fluorides not only reveal the key role of ionic radius in RE compound stability, but also are significant for the design and synthesis of new materials and motivate the more effective utilization of RE.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Recent Advances in Rechargeable Aluminum-Ion Batteries and Considerations for Their Future Progress

Owing to their high theoretical capacity and reliable operational safety, nonaqueous rechargeable aluminum batteries (RABs) have emerged as a promising class of battery materials and been intensively studied in recent years; however, a lack of suitable, high-performing positive electrode materials, along with the need for air-sensitive and expensive ionic liquid electrolytes, has significantly hindered the practical use of RABs in large-scale applications. Therefore, we sought to carefully analyze positive electrode materials and the associated electrolytes that have been reported in these battery systems in order to stimulate the design of the next generation of high-performance and low-cost RABs. In this review, we have summarized the electrode materials that have been used in both nonaqueous and aqueous RAB systems and provided a rational classification based on the types of materials used and their respective structures. Additionally, we have reviewed electrolytes employed in RABs and have categorized them according to two main types of applications, either for fixed battery systems or for use in portable devices. Here, a systematic account of recent developments on RABs, with a focus on electrode materials, innovative perspectives, and impending research efforts on future RABs, has been included. Finally, a proposed liquid RAB system is discussed with the aim of solving issues regarding fast-charging and long operational lifetimes, followed by insights into solid RABs for use in both portable and multistructural RAB systems.

25 ENERGY STORAGE↗
NASA NTRS1986

The galactic corona

The IUE observations and theories involving the gaseous galactic corona of the Milky Way are reviewed. Observational topics emphasized include results relevant to the z distribution, kinematics, and ionic and elemental abundances of the gas. The theories for the support, ionization, and kinematics of the galactic halo appear to require a merging of the ideas associated with the galactic fountain models and the photoionized halo models. The Si IV found in the galactic halo is likely mostly produced by photoionization while the N V is probably mostly produced by collisional ionization in cooling fountain gas; C IV may represent an intermediate case with important contributions from photoionization and from collisional ionization.

Savage, Blair D.↗
DOE OSTI2022

A molecular dynamics survey of grain boundary energy in uranium dioxide and cerium dioxide

Uranium dioxide (UO 2 ) is the primary fuel material that is used in current nuclear reactors. As one of the most fundamental material parameters, grain boundary (GB) energy strongly influences many fuel properties, and the influences depend on the characters and properties of individual GBs. Using molecular dynamics simulations, a high throughput survey of GB energy in UO 2 was carried out for the purpose of elucidating the roles of GB geometry such as misorientation and inclination, as well as the bonding nature of UO 2 , in affecting GB energy. GB energies in CeO 2 were calculated as well for comparison with UO2toinvestigate the generality of GB energy anisotropy in fluorite phase oxides. The results show significant GB energy anisotropy in both UO 2 and CeO 2 that is associated with the cubic symmetry of the fluorite structure. More interestingly, the GB anisotropy is found to be dependent not only on the crystal structure but also the ionic bonding. As such, the GB energy anisotropy in fluorite oxides has significant differences compared with that in fcc metals. We report that the data obtained and the increased knowledge on GB anisotropy will facilitate GB engineering for nuclear fuels with improved properties

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Small Molecule Sorting: A Fluorescence Study of Microemulsions

The application of microemulsions to a wide range of industries relies on their ability to solubilize small molecules with vastly different structures. Herein, we use multiple fluorescence techniques to probe ionic (rhodamine 6g, r6g), polar (coumarin 153, c153), nonpolar (diphenylanthracene, DPA), and amphiphilic (laurdan) small molecules in a nonionic, bicontinuous microemulsion of varying hydration. All fluorophores investigated were found to associate with the surfactant region despite their different structures and properties. The hydration of the surfactant layer was found to increase linearly with water addition, but while this initially increases the fluidity of the surfactant layer, fluorescence anisotropy of c153 and r6g indicates a stiffening of the surfactant at water content >60%. This stiffening of the surfactant layer at higher water content correlates with a morphological change in the microemulsion from a bicontinuous structure to droplets. In contrast, the nonpolar DPA shows a change in partitioning as hydration changes, increasing its association with the oil domain. Altogether, these studies elucidate not only the capability of these microemulsions to host a range of small molecules in the surfactant layer with tunable position but also the ability to probe the driving force of bulk structural changes in these heterogeneous fluids.

25 ENERGY STORAGE↗
DOE OSTI2024

Electrochemical grand potential-based phase-field simulation of electric field-assisted sintering

Here, an electrochemical grand potential functional was proposed to describe the sintering of an ionic ceramic green body. The resultant phase-field description enables simulation of the consolidation of an arbitrary number of granular particles and their interactions with the surrounding void phase. The model includes the effects of charged vacancies and the associated interactions between internal and applied electric fields. Defect segregation to grain boundaries is also accounted for, as well as enhanced interfacial defect mobilities. The model was parameterized for Y 2 O 3 . Simulations of two-particle systems showed that the applied electric field had an increasingly important impact on neck growth as particle size increased. A sudden rapid increase in temperature occurred for larger field strengths, which has been reported to be correlated to the onset of a flash event in flash sintering. Simulations of many particles showed that internal heat generation by Joule heating was localized at particle–particle contacts (grain boundaries), even though their conductivities were lower than nearby internal particle-void interfaces. A percolative path for ionic charge across the green body and the ceramic sintered solid was thus defined, accelerating the Joule heating process as the porosity of the green body is removed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structural incorporation into goethite fractionates rare earth elements

Up to 20% of rare earth elements (REEs) in ion adsorption deposits (IADs) are associated with iron oxide minerals, primarily goethite. Often termed “non-extractable”, goethite-hosted REEs are thought to be structurally incorporated into the mineral lattice. The large mismatch in size and charge density between REEs (ionic radius, r = 0.86–1.03 Å) and Fe 3+ (r = 0.65 Å), however, makes direct substitution energetically unfavorable. To determine REE compatibility with and incorporation into goethite on the atomic level, we used X-ray pair distribution function analysis (PDF) and LIII-edge extended X-ray absorption fine structure (EXAFS) spectroscopy. The compatibility of REEs with goethite and the precursor ferrihydrite (FH) is Lu ≥ Yb ≫ Dy > Nd for both phases. Nd and Dy primarily form secondary amorphous phases, with <30% Nd and Dy incorporated into goethite. In the FH precursor at pH 6.8, Yb and Lu assumed a local REE-OOH like structure with next nearest neighbor Fe. The Yb, Lu, and Nd-FH samples were also matured at ambient conditions for 100 days; despite the presence of only ∼5% goethite, Lu and Yb were 42% and 100% in goethite-like structural environments, respectively, whereas the PDF and EXAFS of Nd showed little evidence of any incorporation. Using ab initio molecular dynamics (AIMD) to model the EXAFS, we determined the presence of protonated Fe vacancies, edge-sharing with structural Lu and Yb, likely helped accommodate these REEs in the goethite structure. Incorporation into Fe oxyhydroxides thus potentially fractionates the REEs during weathering associated with formation of lateritic and ion adsorption deposits.

Mergelsberg, Sebastian T. [Pacific Northwest Natio↗
NASA NTRS1990

Kinetics and transport at AMTEC electrodes. I - The interfacial impedance model

Mixed mass-transport and kinetic control of sodium ion reduction at porous inert electrodes on sodium beta-double-prime alumina solid electrolyte (BASE) ceramic in a high-temperature electrochemical cell has been observed and modeled. The high ionic conductivity of BASE and the reversibility of the liquid sodium/BASE anodic half-cell led to assignment of potential-dependent (nonohmic) resistances to kinetic and mass-transport processes associated with the porous electrode. The morphology of these electrodes and typical sodium gas pressures are consistent with Knudsen, or free-molecular, flow through the electrode.

Williams, R. M.↗
DOE OSTI2022

Molecular-Level Control over Ionic Conduction and Ionic Current Direction by Designing Macrocycle-Based Ionomers

Poor ionic conductivity of the catalyst-binding, submicrometer- thick ionomer layers in energy conversion and storage devices is a huge challenge. However, ionomers are rarely designed keeping in mind the specific issues associated with nanoconfinement. Here, we designed nature-inspired ionomers (calix-2) having hollow, macrocyclic, calix[4]arene-based repeat units with precise, sub-nanometer diameter. In ≤100 nm-thick films, the in-plane proton conductivity of calix-2 was up to 8 times higher than the current benchmark ionomer Nafion at 85% relative humidity (RH), while it was 1-2 orders of magnitude higher than Nafion at 20-25% RH. Confocal laser scanning microscopy and other synthetic techniques allowed us to demonstrate the role of macrocyclic cavities in boosting the proton conductivity. The systematic self-assembly of calix-2 chains into ellipsoids in thin films was evidenced from atomic force microscopy and grazing incidence small-angle X-ray scattering measurements. Moreover, the likelihood of alignment and stacking of macrocyclic units, the presence of one-dimensional water wires across this macrocycle stacks, and thus the formation of long-range proton conduction pathways were suggested by atomistic simulations. We not only did see an unprecedented improvement in thin-film proton conductivity but also saw an improvement in proton conductivity of bulk membranes when calix-2 was added to the Nafion matrices. Nafion-calix-2 composite membranes also took advantage of the asymmetric charge distribution across calix[4]arene repeat units collectively and exhibited voltage-gating behavior. The inclusion of molecular macrocyclic cavities into the ionomer chemical structure can thus emerge as a promising design concept for highly efficient ion-conducting and ion-permselective materials for sustainable energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Dry-processed electrodes enabled by polytetrafluoroethylene fibrillation for high-performance lithium-ion batteries

The dry processing technique of polytetrafluoroethylene (PTFE) fibrillation offers significant advancements in cost reduction, environmental impact, and electrochemical performance. Dry processing alone allows for ∼ 20–60% cost reduction and increases of up to 40 mg cm⁻2 of areal loading – it typically comes at a reduction of rate capability. By leveraging the network structure of fibers, this method enhances rate capability and cycling performance, providing a compelling alternative to the conventional and currently predominant wet processing. The review delves into PTFE fibrillation mechanisms and examines critical influencing factors including material properties and processing parameters. It also discusses challenges associated with the electrodes fabricated by PTFE fibrillation, including structural instability due to insufficient PTFE fibrillization, compromised electrical conductivity from an insufficient conductive network, inhomogeneous dispersion resulting from the absence of solvents, restricted ionic transport due to increased electrode thickness, inadequate adhesion to current collector because of low surface energy of PTFE, electrochemical degradation due to low lowest unoccupied molecular orbital (LUMO) level of PTFE, particle damage during processing and environmental concerns related PTFE being a perfluoroalkyl and polyfluoroalkyl substances (PFAS). Recent research innovations aimed at mitigating these issues, their application in beyond-lithium batteries, and future research directions are thoroughly discussed.

Park, Hyunji↗
DOE OSTI2020

FeS colloids – formation and mobilization pathways in natural waters

For this study, we have used synchrotron-based X-ray absorption spectroscopy (structure of Fe–S clusters), transmission electron microscopy (solid-phase crystallinity), Fourier-transform ion-cyclotron-resonance mass spectrometry (identity and composition of natural organic carbon compounds), inductively coupled plasma optical emission spectrometry (total aqueous Fe), and the revised ferrozine method (aqueous Fe( II ) and Fe( III ) concentrations) to determine the stability and nature of colloids generated by sulfidation of ferrihydrite nanoparticles in the absence and presence of organic compounds. We observed that reductive dissolution of ferrihydrite by aqueous sulfide generates nm-scale FeS clusters. Their subsequent aggregation, which promotes settling of FeS aggregates into the solid fraction, was directly correlated with sulfide/Fe ratio. At sulfide/Fe ratios ≤0.5, FeS clusters and larger colloids remained in suspension for at least 14 days (and up to several months). At sulfide/Fe ratios >0.5, sulfidation reaction rates were rapid and FeS cluster aggregation was accelerated. Moreover, the presence of organic compounds increased the time of suspension of FeS colloids, whereas increased ionic strength inhibited the generation of FeS colloids. We present a general conceptual model to predict when and where FeS colloids can form and enhance or inhibit the mobility of contaminants and nutrients associated with them. Our study indicates that in lowsalinity fresh groundwater systems poor in sulfate (i.e. low sulfidation; lakes, floodplains, peatlands etc.), the ferrihydrite sulfidation reaction generates aqueous FeS clusters and larger colloids that remain suspended over long time periods, thus mobilizing a substantial fraction of the total aqueous Fe and S.

54 ENVIRONMENTAL SCIENCES↗