Search NASA⌕ Search

SEARCH · Search NASA

Results for “junction conditions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Majorana-based quantum computing in nanowire devices

The boundary of one-dimensional topological superconductors might lead to the appearance of Majorana zero modes, whose nontrivial exchange statistics can be used for quantum computing. In branched nanowire networks, one can exchange Majorana modes by time dependently tuning topologically nontrivial parameter regions. In this paper, we simulate the exchange of four Majorana modes in T-shaped junctions made out of $\textit{p}$-wave superconducting Rashba wires. Specifically, we derive concrete experimental predictions for (quasi-)adiabatic braiding times and determine geometric conditions for successful Majorana exchange processes. Moreover, we prove that, in the adiabatic limit, the gating time needs to be smaller than the inverse of the squared superconducting order parameter and scales linearly with the gating potential. Furthermore, we show how to circumvent the formation of additional Majorana modes in branched nanowire systems, arising at wire intersection points of narrow junctions. Finally, we propose a multiqubit setup, allowing for universal quantum computing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Real-time Condition Monitoring of Power Modules in Grid-tied Power Converter

This paper proposes and demonstrates a real-time condition monitoring method using gate driver integrated sensing circuits and sensor fusion algorithms. Power device on-state voltage (VDSon) measurement and junction temperature (Tj) sensing circuits with high noise immunity are built and integrated into an adaptive gate driver circuit for power modules. Considering the inherently noisy measurement environment of power converters, VDSon together with several other measurements are fused together to provide accurate descriptions of the stress and degradation of each power device. Furthermore, the gate driver circuit can actively control the turn-on gate voltage (VGSon) for each device based on the stress and degradation state. The proposed sensing circuits and power device condition assessment algorithms are implemented in a 75 KVA grid-tied power converter. This paper focuses on the sensing circuits hardware designs and testing in grid-tied power converter prototype and device stress index generation. More comprehensive results on the device state of health index generation will be presented in future work.

Fan, Junchong↗

Neuromorphic heat transport effects in a molecular junction

Understanding energy transport at the nanoscale is an open and fundamental challenge in the molecular sciences with direct implications for the design of new electronics, computing devices, and materials. While nanoscale energy transport under steady-state conditions has been studied extensively, there is much less known about energy transport under time-dependent driving forces, particularly in the far-from-equilibrium regime. In this work, we use nonequilibrium molecular dynamics simulations and stochastic thermodynamics to investigate energy transport in a well-studied nanoscale system—a molecular junction—subjected to a time-periodic temperature gradient. The primary observation is that molecular junctions can exhibit heat transport hysteresis, a phenomenon in which the heat flux through a system depends not only on the instantaneous value of a time-dependent temperature bias but also on the temporal history of that bias. The presented findings illustrate that molecular junctions can exhibit the specific memory effect—heat transport hysteresis—that is essential for the design of thermal neuromorphic computers. This work elucidates a potential pathway toward the realization of such devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

How Should Researchers Measure Perovskite-Based Monolithic Multijunction Solar Cells’ Performance? A Calibration Lab's Perspective

Perovskite multijunctions (PVSK MJs) have made remarkable progress with monolithic PVSK/PVSK tandems surpassing the efficiency of single-junction (1 J) PVSK cells and PVSK/Si cells reported to exceed the 30% efficiency mark. These efficiencies are reported at standard test conditions (STC), established by the photovoltaic (PV) community to facilitate comparison between devices and technologies. Herein, it is discussed why an accurate STC performance measurement for a MJ is more complicated than for a 1 J cell and the special aspects to be considered when measuring the current-voltage characteristics and the performance of PVSK-containing MJ cells are emphasized. It is discussed why a spectrally adjustable solar simulator is needed and the sequence of accurate performance measurement, namely measurement of the spectral response of each junction, adjustment of the spectrum, and appropriate protocols for measuring the power output of the device at STC, is presented. For all these, common errors and pitfalls that sometime lead to misleading interpretation of the results are presented, and the methods to evaluate the accuracy of the data when a spectrally adjustable solar simulator is not available are recommended. Finally, first step is taken toward recommending performance measurement approaches when high throughput is required as will eventually be in a production line.

14 SOLAR ENERGY↗

A role for high frequency superconducting devices in free space power transmission systems

Major advances in space power technology are being made in photovoltaic, solar thermal, and nuclear systems. Despite these advances, the power systems required by the energy and power intensive mission of the future will be massive due to the large collecting surfaces, large thermal management systems, and heavy shielding. Reducing this mass on board the space vehicle can result in significant benefits because of the high cost of transporting and moving mass about in space. An approach to this problem is beaming the power from a point where the massiveness of the power plant is not such a major concern. The viability of such an approach was already investigated. Efficient microwave power beam transmission at 2.45 GHz was demonstrated over short range. Higher frequencies are desired for efficient transmission over several hundred or thousand kilometers in space. Superconducting DC-RF conversion as well as RF-DC conversion offers exciting possibilities. Multivoltage power conditioning for multicavity high power RF tubes could be eliminated since only low voltages are required for Josephson junctions. Small, high efficiency receivers may be possible using the reverse Josephson effects. A conceptual receiving antenna design using superconducting devices to determine possible system operating efficiency is assessed. If realized, these preliminary assessments indicate a role for superconducting devices in millimeter and submillimeter free space power transmission systems.

Christian, Jose L., Jr.↗

A theoretical analysis of steady-state charge collection in simple diodes under high-injection conditions

A previous rigorous mathematical analysis of drift-diffusion equations was used to investigate collected charge in a simple reverse-biased p-n junction diode exposed to an ionization source that liberates carriers (electron-hole pairs) in a quasi-neutral region within the diode. Each of two simple models was found to agree with the more rigorous analysis when carrier liberation is sufficiently intense. One is the sensitive volume (SV) model, and the other was called “ambipolar diffusion with a cutoff” (ADC). The earlier rigorous analysis was worked out in detail only for a localized source, i.e., a point source of carrier liberation, so it was able to validate the applicability of each simple model only for that case. The present paper treats an arbitrary spatial distribution of carrier generation and concludes that the ADC model remains valid for this more general case, but the SV model does

Edmonds, Larry D.↗

Performance of high resistivity n+pp+ silicon solar cells under 1 MeV electron irradiation

High resistivity (1250 and 84 ohm-cm) n(+)pp(+) silicon solar cells were irradiated and their performance evaluated as a function of fluence. The greatest degradation in power occurred for the higher resistivity cell. The data were analyzed under open circuit conditions, and the components of V sub oc determined as a function of fluence. It was found that the voltage contributions from the front and back junctions decreased while the base component (V sub B) increased with fluence. The anomalous behavior of V sub B was attributed to an increase in the base minority carrier gradient with fluence. An argument that the increased power degradation in the 1250 ohm-cm cells was attributable to an increased voltage drop in the base is presented. Diffusion lengths calculated under high injection conditions were significantly greater than those determined under low injection. This was attributed to a saturation of recombination centers under high injection conditions.

Weinberg, I.↗

Surface and implantation effects on p-n junctions

The contribution of the graded region of implanted p-n junctions is analyzed using an exponential profile. Though previously neglected, it was recently shown that this contribution to the saturation current of HgCdTe diodes is significant. Assuming a dominant Auger recombination, an analytical solution to the continuity equation is obtained. An expression for the current generation by the graded region is presented for both ohmic and reflecting boundary conditions. A revised condition for a wide region is derived. When the region is narrow, the current differs drastically from that of the zero-gradient case. The effects of the junction depth and the substrate and surface concentrations on the current are investigated. It is shown that the reverse current does not saturate.

Schacham, Samuel E.↗

The effect of process conditions on the performance of epitaxial InP solar cells

Indium phosphide solar cells have a higher resistance to electron irradiation than Si or GaAs cells of comparable junction depth. As a result, there is much interest in the use of this material for space applications. Cells of this material were made in bulk InP by a number of techniques, including ion implantation, direct diffusion in sealed ampoules, and by open tube diffusion. However, it is generally considered that the epitaxial approach will be superior to all of these techniques. The epitaxy of InP is considerably more difficult than that of gallium arsenide, for a number of reasons. Perhaps the most important is the fact that the native oxides of Indium are extremely difficult to remove, as compared to that of Gallium. In addition, thermal treatments for the desorption of these oxides often result in the formation of phosphorus vacancies and free indium on the surface. Thus, inadequate sample preparation before epitaxy, poor reactor cleaning procedures, or poor transition procedures between the growth of successive layers, all give rise to trap phenomena and to high interface recombination velocities. Moreover, the lifetime of the grown material is dominated by the occurrence of native defects, so that it is a strong function of growth parameters. These problems are of special interest to the fabrication of solar cells, where long life-time, combined with the absence of traps, is highly desirable. A study of this problem is described using a non-invasive diagnostic technique which was developed.

Borrego, J. M.↗

Preliminary low temperature electron irradiation of triple junction solar cells

JPL has routinely performed radiation testing on commercial solar cells and has also performed LILT testing to characterize cell performance under far sun operating conditions. This research activity was intended to combine the features of both capabilities to investigate the possibility of any room temperature annealing that might influence the measured radiation damage. Although it was not possible to maintain the test cells at a constant low temperature between irradiation and electrical measurements, it was possible to obtain measurements with the cell temperature kept well below room temperature.

annealing↗

Buckling analysis for axially compressed flat plates, structural sections, and stiffened plates reinforced with laminated composites

A classical buckling analysis is developed for stiffened, flat plates composed of a series of linked plate and beam elements. Plates are idealized as multilayered orthotropic elements. Structural beads and lips are idealized as beams. The loaded edges of the stiffened plate are simply-supported and the conditions at the unloaded edges can be prescribed arbitrarily. The plate and beam elements are matched along their common junctions for displacement continuity and force equilibrium in an exact manner. Offsets between elements are considered in the analysis. Buckling under uniaxial compressive load for plates, sections, and stiffened plates is investigated. Buckling loads are the lowest of all possible general and local failure modes, and the mode shape is used to determine whether buckling is a local or general instability. Numerical correlations with existing analysis and test data for plates, sections, and stiffened plates including boron-reinforced structures are discussed. In general correlations are reasonably good.

Viswanathan, A. V.↗

Buckling analysis for structural sections and stiffened plates reinforced with laminated composites.

A classical buckling analysis is developed for stiffened, flat plates composed of a series of linked flat plate and beam elements. Plates are idealized as multilayered orthotropic elements; structural beads and lips are idealized as beams. The loaded edges of the stiffened plate are simply supported and the conditions at the unloaded edges can be prescribed arbitrarily. The plate and beam elements are matched along their common junctions for displacement continuity and force equilibrium in an exact manner. Offsets between elements are considered in the analysis. Buckling under uniaxial compressive load for plates, sections and stiffened plates is investigated. Buckling loads are found as the lowest of all possible general and local failure modes and the mode shape is used to determine whether buckling is a local or general instability. Numerical correlations with existing analysis and test data for plates, sections and stiffened plates including boron-reinforced structures are discussed. In general, correlations are reasonably good.

Viswanathan, A. V.↗

Microscopic Visualization of Cell-Cell Adhesion Complexes at Micro and Nanoscale

Considerable progress has been made in our knowledge of the morphological and functional varieties of anchoring junctions. Cell-cell adhesion contacts consist of discrete junctional structures responsible for the mechanical coupling of cytoskeletons and allow the transmission of mechanical signals across the cell collective. The three main adhesion complexes are adherens junctions, tight junctions, and desmosomes. Microscopy has played a fundamental role in understanding these adhesion complexes on different levels in both physiological and pathological conditions. In this review, we discuss the main light and electron microscopy techniques used to unravel the structure and composition of the three cell-cell contacts in epithelial and endothelial cells. It functions as a guide to pick the appropriate imaging technique(s) for the adhesion complexes of interest. We also point out the latest techniques that have emerged. At the end, we discuss the problems investigators encounter during their cell-cell adhesion research using microscopic techniques.

59 BASIC BIOLOGICAL SCIENCES↗

Comparison of the Effects of Bipolar Membrane Preparation Conditions on the Mechanical Durability and Electrochemical Performance for Electrodialysis Applications

Bipolar membranes (BPMs) are enabling materials for electrochemical conversion technologies such as water electrolysis, fuel cells, CO 2 electrolysis, and electrodialysis (ED) for direct air/ocean capture of CO 2 . However, current BPM durability can suffer from chemical, mechanical, and performance degradation when operated at high current density (ion flux) and physical scale. Therefore, this limits its adoption in a wider applications space. BPMs have several known degradation mechanisms, including chemical breakdown of ion-exchange polymers, loss of junction adhesion, or physical breakdown due to shearing force and pressure swings in an electrodialysis cell. To assess the electrochemical stability and mechanical durability of BPMs under operational conditions, we investigated how fabrication conditions (including preconditioning, hot-pressing temperature and pressure, and catalyst loading) impact the adhesion of custom-made BPMs. T-peel studies were performed ex situ to quantify adhesive forces of BPMs, and bipolar membrane electrodialysis (BPMED) experiments were performed to assess the electrochemical performance of the corresponding BPMs. The results of this systematic comparison indicate that hydration and heated pressing create improved adhesion during the fabrication of BPMs, and BPMED testing shows that these fabrication techniques are not detrimental to the electrochemical performance of the BPMs.

36 MATERIALS SCIENCE↗

The Environmental Performance at Low Intensity, Low Temperature (LILT) of High Efficiency Triple Junction Solar Cells

A number of JPL missions, either active or in the p l d g stages, require the accurate LILT flew intensity - low temperate) climate of triple-junction solar. Although triple ignition LILT performance was reported as recently as 2002, there has been an evolutionary advance in cell technology by both U.S. space cell manufacturers that, for mission design purposes, effectively obsoletes the earlier data. As a result, JPL initiated a program to develop a database for the LILT performance of the new high performance triple junction solar cells. JPL obtained Emcore Advanced triple Juntion CIC assemblies and Spectrolab Ultra Triple Junction CIC assemblies. These cells were tested at temperature-intensity ranges designed to cover applications between 1 and 5.18 AU solar distances. 1 MeV electron irradiation from 25 E14 to 1 El5 w were performed on the cells to evaluate the combined effect of particulate radiation and LILT conditions. The effect of LILT conditions was observed to incur an increase in the variation of cell performances such that at simulted 5.18 AU conditions the average performance was approximately 30% with the best cells measuring between 32 and 34% efficiency. The 30% average efficiency compares with approximately 25% average efficiency measured on earlier technology triple junction solar cells.

triple junction↗

Room temperature deposition of superconducting NbN for superconductor-insulator-superconductor junctions

The deposition of stoichiometric B1-crystal-structure (111) NbN films on glass or sapphire substrates by reactive dc magnetron sputtering is reported. High-purity Ar-N2 mixtures are used in the apparatus described by Thakoor et al. (1985), and typical deposition parameters are given as background pressure about 10 ntorr, voltage -325 V, current 1 A, deposition rate 1.35 nm/s, film thickness 500 nm, P(Ar) 5-17 mtorr, initial P(N2) 2-6 mtorr, and room temperature. The N2 consumption-injection characteristics are studied and found to control NbN formation using well-conditioned Nb targets. Films with transition temperatures 15-16 K are obtained at P(Ar) = 12.9 + or - 0.2 mtorr and P(N2) = 3.7 + or - 0.1 mtorr. SIS junctions of area about 0.001 sq cm fabricated using the NbN films are shown to have I-V characteristics with nonlinearity parameter about 110 and NbN superconducting-gap parameter Delta = about 2.8 meV.

Thakoor, S.↗

Switching current reduction in magnetoresistive random access memories

We present an approach for minimizing the critical current for the magnetization switching in magnetic tunnel junctions by optimizing the spatial distribution of the current density. We show that such a minimization is possible because critical current is determined by the condition of making one of the magnetization eigenstates grow in time. The excitation of the eigenstates is enhanced when the spatial distributions of the eigenstates and current density overlap. Critical current can be viewed as a functional of the current density spatial distribution and it can be minimized by optimizing this distribution. Such an optimization results in a major reduction of the critical current and increase of the switching efficiency, viz. the ratio between the energy barrier and critical current. The minimized critical current increases approximately linearly with the magnetic tunnel junction size, which is much slower than critical current for the case of a uniform current density. The optimized efficiency can be approximately a constant with respect to the magnetic tunnel junction size, which is much higher than the efficiency for the uniform current density. Additional optimization can be achieved by spatially modulating the material parameters, e.g., the saturation magnetization. The presented approach and obtained scaling of the critical current and efficiency offers opportunities for the magnetic tunnel junction optimization.

36 MATERIALS SCIENCE↗

Biomechanical Analysis of Multilevel Posterior Cervical Spinal Fusion Constructs

Study Design: Controlled Laboratory Study Objective: To compare multilevel posterior cervical fusion (PCF) constructs stopping at C7, T1, and T2 under cyclic load to determine the range of motion (ROM) between the lowest instrumented level and lowest instrumented-adjacent level (LIV-1). Summary of Background Data: PCF is a mainstay of treatment for various cervical spine conditions. The transition between the flexible cervical spine and rigid thoracic spine can lead to construct failure at the cervicothoracic junction. There is little evidence to determine the most appropriate level at which to stop a multilevel PCF. Methods: Fifteen human cadaveric cervicothoracic spines were randomly assigned to 1 of 3 treatment groups: PCF stopping at C7, T1, or T2. Specimens were tested in their native state, following a simulated PCF, and after cyclic loading. Specimens were loaded in flexion-extension), lateral bending, and axial rotation. Three-dimensional kinematics were recorded to evaluate ROM. Results: The C7 group had greater flexion-extension motion than the T1 and T2 groups following instrumentation (10.17±0.83 degree vs. 2.77±1.66 degree and 1.06±0.55 degree, P <0.001), and after cyclic loading (10.42±2.30 degree vs. 2.47±0.64 degree and 1.99±1.23 degree, P <0.001). There was no significant difference between the T1 and T2 groups. The C7 group had greater lateral bending ROM than both thoracic groups after instrumentation (8.81±3.44 degree vs. 3.51±2.52 degree, P =0.013 and 1.99±1.99 degree, P =0.003) and after cyclic loading. The C7 group had greater axial rotation motion than the thoracic groups (4.46±2.27 degree vs. 1.26±0.69 degree, P =0.010; and 0.73±0.74 degree, P =0.003) following cyclic loading. Conclusion: Motion at the cervicothoracic junction is significantly greater when a multilevel PCF stops at C7 rather than T1 or T2. This is likely attributable to the transition from a flexible cervical spine to a rigid thoracic spine. Although this does not account for in vivo fusion, surgeons should consider extending multilevel PCF constructs to T1 when feasible. Level of Evidence: Not applicable.

Neurosciences & Neurology↗