Search NASA⌕ Search

SEARCH · Search NASA

Results for “kirchhoff”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Vortex simulation of an inviscid shear layer

The accuracy of the vortex-blob method was tested by simulating a free-shear-layer instability, Kirchhoff's elliptical vortex, and a circular vortex. The main numerical parameters in the vortex-blob method are the density of the vortices, and the distribution of vorticity within each vortex core. The growth rate of a periodic unstable mode of the shear layer was calculated numerically and compared with the exact result. The error is only a few percent for about 10 rows of vortex blobs. The error is reduced by decreasing the spacing between vortices and, correspondingly, the core size. In the simulation of the motion of the elliptical vortex, the rotation of the boundary, without change of shape, and the circular particle paths of the vortical fluid were well simulated. For the circular vortex, optimum sets of parameters were obtained by comparing them with the exact velocity. The results are consistent with convergence theories of the vortex-blob method. In particular, second-order convergence is observed with a Gaussian core from velocity calculation.

Nakamura, Y.↗
NASA NTRS1983

Coherent scattering of a spherical wave from an irregular surface

The scattering of a spherical wave from a rough surface using the Kirchhoff approximation is considered. An expression representing the measured coherent scattering coefficient is derived. It is shown that the sphericity of the wavefront and the antenna pattern can become an important factor in the interpretation of ground-based measurements. The condition under which the coherent scattering-coefficient expression reduces to that corresponding to a plane wave incidence is given. The condition under which the result reduces to the standard image solution is also derived. In general, the consideration of antenna pattern and sphericity is unimportant unless the surface-height standard deviation is small, i.e., unless the coherent scattering component is significant. An application of the derived coherent backscattering coefficient together with the existing incoherent scattering coefficient to interpret measurements from concrete and asphalt surfaces is shown.

Fung, A. K.↗
NASA NTRS1983

Effects of a rough boundary surface on polarization of the scattered field from an inhomogeneous medium

A combination of the standard Kirchhoff method for rough surface scattering with the Rayleigh phase function radiative transfer method for volume scattering is employed in the present study of the effect of surface roughness on the polarization of the scattered field. It is found that for pure surface scattering, the polarization ratio between zero and 20 deg incidence angles is sensitive to surface roughness change. When both surface and volume scattering are present, however, copolarization nulls by colatitude or degree of polarization at zero to 15 deg incidence angle, and copolarization or crosspolarization nulls by longitude at large incidence angles, are better indicators of surface roughness changes. It is noted that degree of polarization and copolarization nulls by colatitude vary monotonously with incidence angle, while in combined surface and volume scattering these have, respectively, a minimum and a maximum. This characteristic allows the separation of combined surface and volume scattering from pure surface or volume scattering.

Fung, A. K.↗
NASA NTRS1984

Wave attenuation and mode dispersion in a waveguide coated with lossy dielectric material

The modal attenuation constants in a cylindrical waveguide coated with a lossy dielectric material are studied as functions of frequency, dielectric constant, and thickness of the dielectric layer. A dielectric material best suited for a large attenuation is suggested. Using Kirchhoff's approximation, the field attenuation in a coated waveguide which is illuminated by a normally incident plane wave is also studied. For a circular guide which has a diameter of two wavelengths and is coated with a thin lossy dielectric layer (omega sub r = 9.1 - j2.3, thickness = 3% of the radius), a 3 dB attenuation is achieved within 16 diameters.

Lee, C. S.↗
NASA NTRS1984

Backscattering coefficient of a perturbed sinusoidal surface

A coherent model for scattering from a randomly perturbed periodic surface is developed using the Kirchhoff approximation. It is intended to model wave scattering from ground surfaces with row directions. Results are illustrated and compared with an incoherent scatter model and measured backscattering angular curves from ploughed fields.

Eom, H. J.↗
NASA NTRS1984

A scatter model for vegetation up to Ku-band

A scatter model is developed based on the matrix doubling method for volume scattering and the Kirchhoff method in rough surface scattering. Scattering from vegetation is assumed to be dominated by leaves and a single leaf is modeled by a thin dielectric disk. In developing the phase matrix for the disk, field within the disk is taken to be constant over the disk thickness, but phase changes across the surface of the disk are accounted for. Comparisons of this scatter model with radar measurements indicate good agreements in polarization, angular trends, and frequency up to Ku-band. This represents a considerable improvement over low-frequency scatter models which are valid up to S-band.

Eom, H. J.↗
NASA NTRS1984

Scattering of electromagnetic waves from a randomly perturbed quasiperiodic surface

Electromagnetic-wave scattering by a quasi-periodic surface with random perturbations (as in the remote sensing of plowed fields) is investigated analytically, applying the Kirchhoff approximation and modeling the plowed fields by means of Gaussian random variation, sinusoidal variation, and Gaussian random variation about the spatial frequency. Coherent and incoherent bistatic scattering coefficients are derived in closed form by evaluating the physical-optics integral and shown to be proportional, in the geometric-optics limit, to the occurrence probability of slopes which reflect the incident wave specularly in the direction of the scattered wave. Backscattering cross sections are plotted as functions of incidence angle for a number of cases, demonstrating the strong effect of row direction.

Shin, R. T.↗
NASA NTRS1985

A nonlinear analysis of infinitely long graphite-epoxy cylindrical panels loaded with internal pressure

The structural response of internally pressurized composite cylindrical panels, representative of a transport aircraft's fuselage skins, is predicted by means of a one-dimensional, geometrically nonlinear analysis. An analytical study is conducted for the response of 4-, 8-, and 16-ply graphite/epoxy skins. The results obtained indicate that the response is geometrically nonlinear, and that a boundary layer with a severe bending gradient exists at the panel edges. The importance of through-the-thickness shearing deformations in the bending boundary layer is illustrated through comparison of analyses based on Kirchhoff-Love and shear deformation theories. Numerical results for the bending boundary layer lengths of the different panels are presented, and two bending boundary layers are predicted with the shear deformation theory.

Boitnott, R. L.↗
NASA NTRS1985

Massive separation and dynamic stall on a cusped trailing-edge airfoil

The cross-over from a predominantly attached two-dimensional flow to the bluff body form of separation is modeled via the interacting boundary layer approximation. The initial breakdown of the predominantly attached flow on a cusped trailing edge airfoil is examined using the Hilbert integral form of the unsteady interacting boundary layer equations. In addition, an interacting boundary layer technique is developed for calculating bluff body separation. This new model eliminates the severe scaling problems associated with bluff body separation through the use of a realistic inviscid eddy model, based on the infinite eddy Kirchhoff free-streamline description of separation. Brief consideration is given to the cross-over from bluff body separation to a predominantly attached flow, the extension to finite eddies and cascade flows, and the possible coupling with full, or parabolized, Navier-Stokes calculations.

Rothmayer, A. P.↗
NASA NTRS1986

Electromagnetic scattering theory

Electromagnetic scattering theory is discussed with emphasis on the general stochastic variational principle (SVP) and its applications. The stochastic version of the Schwinger-type variational principle is presented, and explicit expressions for its integrals are considered. Results are summarized for scalar wave scattering from a classic rough-surface model and for vector wave scattering from a random dielectric-body model. Also considered are the selection of trial functions and the variational improvement of the Kirchhoff short-wave approximation appropriate to large size-parameters. Other applications of vector field theory discussed include a general vision theory and the analysis of hydromagnetism induced by ocean motion across the geomagnetic field. Levitational force-torque in the magnetic suspension of the disturbance compensation system (DISCOS), now deployed in NOVA satellites, is also analyzed using the developed theory.

Bird, J. F.↗
NASA NTRS1986

Regression models for vegetation radar-backscattering and radiometric emission

Simple regression estimation of radar backscatter and radiometric emission from vegetative terrain is proposed, based on the exact radiative transfer models. A vegetative canopy is modeled as a Rayleigh scattering layer above an irregular Kirchhoff surface. The rms errors between the exact and the estimated ones are found to be less than 5 percent for emission, and 1 dB for the backscattering case, in most practical uses. The proposed formulas are useful in quickly estimating backscattering and emission from the vegetative terrain.

Eom, H. J.↗
NASA NTRS1986

Postbuckling behavior of longitudinally compressed orthotropic plates with three-dimensional flexibility

Postbuckling results for the average longitudinal compressive stress vs applied displacement are obtained for aluminum (isotropic), aluminum/epoxy (quasi-isotropic), and 45-deg graphite/epoxy (orthotropic) plates using classical (Kirchhoff) and conventional transverse shearing theories. An analysis of the results obtained shows that, in the postbuckling range, the classical theory cannot provide reasonably accurate results even for thin plates.

Stein, M.↗
NASA NTRS1986

Use of speckle for determining the response characteristics of Doppler imaging radars

An optical model is developed for imaging optical radars such as the SAR on Seasat and the Shuttle Imaging Radar (SIR-B) by analyzing the Doppler shift of individual speckles in the image. The signal received at the spacecraft is treated in terms of a Fresnel-Kirchhoff integration over all backscattered radiation within a Huygen aperture at the earth. Account is taken of the movement of the spacecraft along the orbital path between emission and reception. The individual points are described by integration of the point source amplitude with a Green's function scattering kernel. Doppler data at each point furnishes the coordinates for visual representations. A Rayleigh-Poisson model of the surface scattering characteristics is used with Monte Carlo methods to generate simulations of Doppler radar speckle that compare well with Seasat SAR data SIR-B data.

Tilley, D. G.↗
NASA NTRS1986

Variational divergence in wave scattering theory with Kirchhoffean trial functions

In a recent study of variational improvement of the Kirchhoff approximation for electromagnetic scattering by rough surfaces, a key ingredient in the variational principle was found to diverge for important configurations (e.g., backscatter) if the polarization had any vertical component. The cause and a cure of this divergence are discussed here. The divergence is demonstrated to occur for arbitrary perfectly conducting scatterers and its universal characterstics are determined, by means of a general divergence criterion that is derived. A variational cure for the divergence is prescribed, and it is tested successfully on a standard scattering model.

Bird, J. F.↗
NASA NTRS1987

A versatile and low order hybrid stress element for general shell geometry

A hybrid stress general shell element is developed based on the Hellinger-Reissner principle modified for relaxed element compatibility conditions. The element is based on a consistent first order thin shell theory with Love Kirchhoff hypotheses. It is of quadrilateral shape with only four corner nodes and five degrees of freedom per node. The geometry of the element is approximated through a bi-cubic polynomial surface patch. Numerical examples consist of torsion-loaded slit cylinder and pinched cylinder with open ends and rigid diaphragmed ends. Also, the representation of the rigid body motion is studied by series of parametric eigenvalue analysis of the stiffness matrix.

Kang, David S.↗
NASA NTRS1987

A simple and efficient shear-flexible plate bending element

A shear-flexible triangular element formulation, which utilizes an assumed quadratic displacement potential energy approach and is numerically integrated using Gauss quadrature, is presented. The Reissner/Mindlin hypothesis of constant cross-sectional warping is directly applied to the three-dimensional elasticity theory to obtain a moderately thick-plate theory or constant shear-angle theory (CST), wherein the middle surface is no longer considered to be the reference surface and the two rotations are replaced by the two in-plane displacements as nodal variables. The resulting finite-element possesses 18 degrees of freedom (DOF). Numerical results are obtained for two different numerical integration schemes and a wide range of meshes and span-to-thickness ratios. These, when compared with available exact, series or finite-element solutions, demonstrate accuracy and rapid convergence characteristics of the present element. This is especially true in the case of thin to very thin plates, when the present element, used in conjunction with the reduced integration scheme, outperforms its counterpart, based on discrete Kirchhoff constraint theory (DKT).

Chaudhuri, Reaz A.↗
NASA NTRS1987

Retrieval of surface roughness parameters from dual-frequency measurements of radar backscattering coefficients

The use of dual-frequency data of backscattering coefficients at a fixed angle to estimate surface roughness parameters is evaluated. Radar backscattering coefficients at 1.5 and 4.25 GHz are calculated using a model based on Kirchhoff approximation of electromagnetic wave scatttering from a rough soil surface. Plots of the calculated backscattering coefficients for Kansas soil moisture contents at the C- and L-band frequencies and HH polarization are analyzed. The effects of changes in correlation length on the backscattering coefficients are investigated. The calculated backscattering coefficients are compared with scatterometer data collected at 1.5 and 4.25 GHz, and it is detected that the model and field data correlate well. The data reveal that it is possible to retrieve the surface roughness parameters from measured radar data.

Mo, Tsan↗
NASA NTRS1987

The effects of soil moisture, surface roughness, and vegetation on L-band emission and backscatter

Measurements performed with SIR-B at 1.28 GHz and an airborne multiple-beam push-broom radiometer at 1.4 GHz over agricultural fields near Fresno, California are examined. A theoretical model (Kirchhoff approximation) was used to assess the effects of surface roughness and vegetation (alfalfa and lettuce) with respect to the responses of microwave emission and backscatter to soil-moisture variations. It is found that the surface roughness plays a dominant role compared to the vegetation cover in the microwave backscatter.

Wang, James R.↗