Search NASA⌕ Search

SEARCH · Search NASA

Results for “laser ranging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Relativity Parameters Determined from Lunar Laser Ranging

Analysis of 24 years of lunar laser ranging data is used to test the principle of equivalence, geodetic precession, the PPN parameters beta and gamma, and G/G. Recent data can be fitted with a rms scatter of 3 cm. (a) Using the Nordtvedt effect to test the principle of equivalence, it is found that the Moon and Earth accelerate alike in the Sun's field. The relative accelerations match to within 5 x 10(exp -13) . This limit, combined with an independent determination of y from planetary time delay, gives beta. Including the uncertainty due to compositional differences, the parameter beta differs from unity by no more than 0.0014; and, if the weak equivalence principle is satisfied, the difference is no more than 0.0006. (b) Geodetic precession matches its expected 19.2 marc sec/yr rate within 0.7%. This corresponds to a 1% test of gamma. (c) Apart from the Nordtvedt effect, beta and gamma can be tested from their influence on the lunar orbit. It is argued theoretically that the linear combination 0.8(beta) + 1.4(gamma) can be tested at the 1% level of accuracy. For solutions using numerically derived partial derivatives, higher sensitivity is found. Both 6 and y match the values of general relativity to within 0.005, and the linear combination beta+ gamma matches to within 0,003, but caution is advised due to the lack of theoretical understanding of these sensitivities. (d) No evidence for a changing gravitational constant is found, with absolute value of G/G less than or equal to 8 x lO(exp -12)/yr. There is significant sensitivity to G/G through solar perturbations on the lunar orbit.

Williams, J. G.↗

Laser ranging to the Moon, Mars and beyond

This paper discusses the current state and the future improvements in the tests of relativistic gravity with Lunar Laser Ranging (LLR). We also consider precision gravitational tests with the future laser ranging to Mars and discuss optical design of the proposed Laser Astrometric Test of Relativity (LATOR) mission. We emphasize that already existing capabilities can offer significant improvements not only in the tests of fundamental physics, but may also establish the infrastructure for space exploration in the near future. Looking to future exploration, what characteristics are desired for the next generation of ranging devices, what is the optimal architecture that would benefit both space exploration and fundamental physics, and what fundamental questions can be investigated? We try to answer these questions.

Murphy, Thomas W. Jr.↗

Laser ranging error budget for the Topex/Poseidon satellite

A laser ranging error budget is detailed, and a specific error budget is derived for the Topex/Poseidon satellite. A ranging uncertainty of 0.76 cm is predicted for Topex/Poseidon at 20 deg elevation using the presently designed laser retroreflector array and only modest improvements in present system operations. Atmospheric refraction and satellite attitude effects cause the predicted range error to vary with satellite elevation angle from 0.71 cm at zenith to 0.76 cm at 20 deg elevation. This a priori error budget compares well with the about 1.2-cm rms a posteriori polynomial orbital fit using existing data taken for an extant satellite of similar size and orbit.

Schwartz, Jon A.↗

Real-time tracking of objects for space applications using a laser range scanner

Real-time tracking of multiple targets and three dimensional object features was demonstrated using a laser range scanner. The prototype was immune to ambient illumination and sun interference. Tracking error feedback was simultaneously obtained from individual targets, global predicted target position, and the human operator. A more complete study of calibration parameters and temperature variations on the scanner is needed to determine the exact performance of the sensor. Lissajous patterns used in three-dimensional real-time tracking prove helpful given their high resolution. The photogrammetry-based Advanced Space Vision System (ASVS) is discussed in combination with the laser range scanner.

Blais, F.↗

The Laser Ranging Experiment of the Lunar Reconnaissance Orbiter: Five Years of Operations and Data Analysis

We describe the results of the Laser Ranging (LR) experiment carried out from June 2009 to September 2014 in order to make one-way time-of-flight measurements of laser pulses between Earth-based laser ranging stations and the Lunar Reconnaissance Orbiter (LRO) orbiting the Moon. Over 4,000 hours of successful LR data are obtained from 10 international ground stations. The 20-30 centimeter precision of the full-rate LR data is further improved to 5-10 centimeter after conversion into normal points. The main purpose of LR is to utilize the high accuracy normal point data to improve the quality of the LRO orbits, which are nomi- nally determined by the radiometric S-band tracking data. When independently used in the LRO precision orbit determination process with the high-resolution GRAIL (Gravity Recovery and Interior Laboratory) gravity model, LR data provide good orbit solutions, with an average difference of approximately 50 meters in total position, and approximately 20 centimeters in radial direction, compared to the definitive LRO trajectory. When used in combination with the S-band tracking data, LR data help to improve the orbit accuracy in the radial direction to approximately 15 centimeters. In order to obtain highly accurate LR range measurements for precise orbit determination results, it is critical to closely model the behavior of the clocks both at the ground stations and on the spacecraft. LR provides a unique data set to calibrate the spacecraft clock. The LRO spacecraft clock is characterized by the LR data to a timing knowledge of 0.015 milliseconds over the entire 5 years of LR operation. We here present both the engineering setup of the LR experiments and the detailed analysis results of the LR data.

Mao, Dandan↗

State-of-the-art satellite laser range modeling for geodetic and oceanographic applications

Significant improvements have been made in the modeling and accuracy of Satellite Laser Range (SLR) data since the launch of LAGEOS in 1976. Some of these include: improved models of the static geopotential, solid-Earth and ocean tides, more advanced atmospheric drag models, and the adoption of the J2000 reference system with improved nutation and precession. Site positioning using SLR systems currently yield approximately 2 cm static and 5 mm/y kinematic descriptions of the geocentric location of these sites. Incorporation of a large set of observations from advanced Satellite Laser Ranging (SLR) tracking systems have directly made major contributions to the gravitational fields and in advancing the state-of-the-art in precision orbit determination. SLR is the baseline tracking system for the altimeter bearing TOPEX/Poseidon and ERS-1 satellites and thus, will play an important role in providing the Conventional Terrestrial Reference Frame for instantaneously locating the geocentric position of the ocean surface over time, in providing an unchanging range standard for altimeter range calibration, and for improving the geoid models to separate gravitational from ocean circulation signals seen in the sea surface. Nevertheless, despite the unprecedented improvements in the accuracy of the models used to support orbit reduction of laser observations, there still remain systematic unmodeled effects which limit the full exploitation of modern SLR data.

Klosko, Steve M.↗

Atmospheric refractivity corrections in satellite laser ranging

Atmospheric refraction can cause significant errors in satellite laser ranging (SLR) systems. There are two techniques which can be used to correct for these errors. Atmospheric models based upon surface measurements of pressure, temperature, and relative humidity have been shown by ray tracing to be accurate to within a few centimeters at 20 deg elevation angle. The residual errors in the models are thought to be primarily caused by horizontal gradients in the refractivity. Although models have been developed to predict the gradient effects, initial studies show that they can be sensitive to local topographic effects. Atmospheric turbulence can introduce random fluctuations in the refractivity, but only introduces centimeter level errors at elevation angles below 10 deg. Pulsed two-color ranging systems can directly measure the atmospheric delay in satellite ranging. These systems require mode-locked multiple-frequency lasers and streak-camera-based receivers and currently appear capable of measuring the atmospheric delay with an accuracy of 0.5 cm or better.

Abshire, J. B.↗

Observing tectonic plate motions and deformations from satellite laser ranging

The scope of geodesy has been greatly affected by the advent of artificial near-earth satellites. The present paper provides a description of the results obtained from the reduction of data collected with the aid of satellite laser ranging. It is pointed out that dynamic reduction of satellite laser ranging (SLR) data provides very precise positions in three dimensions for the laser tracking network. The vertical components of the stations, through the tracking geometry provided by the global network and the accurate knowledge of orbital dynamics, are uniquely related to the center of mass of the earth. Attention is given to the observations, the methodologies for reducing satellite observations to estimate station positions, Lageos-observed tectonic plate motions, an improved temporal resolution of SLR plate motions, and the SLR vertical datum.

Christodoulidis, D. C.↗

Laser satellite ranging

Laser range finding to satellite equipped with retroreflectors, noting accuracy dependence on signal strength

Lehr, C. G.↗

Potentialities of lunar laser ranging for measuring tectonic motions.

The lunar laser-ranging system at McDonald Observatory, Texas, is currently attaining accuracies of plus or minus 15 cm, and plus or minus 3 cm appears feasible. Numerical error analyses containing 97 parameters (35 of them for error sources) indicate that the plus or minus 3 cm system would measure station motions to plus or minus 1 cm/year accuracy within a year for east-west motions and within about 3 years for north-south. Furthermore, the correlations of station motions with other parameters are low, so that it is unlikely that the estimate is too optimistic because of modeling inadequacies of the error analysis.

Kaula, W. M.↗

Laser ranging data analysis

Near real-time Lageos laser ranging data are analyzed in terms of range bias, time bias, and internal precision, and estimates for earth orientation parameters X(sub p), Y(sub p), and UT1 are obtained. The results of these analyses are reported in a variety of formats. Copies of monthly summaries from November, 1986 through November, 1987 are included.

Source record↗

Satellite laser ranging and geological constraints on plate motion

Satellite laser ranging (SLR) observed baseline rates of change were measured and compared with rates determined from sea floor spreading rates and directions, and earth-quake solutions. With the number of years of observation now over six for many of the baselines, the inaccuracy of determining baseline rates of change has diminished so that in some cases it is less than a few mm per year. Thus, a direct comparison between baseline rates of change and rates of change established using geophysical information (called geological rates) is now feasible. In most cases, there is good agreement between the rates determined from SLR and geological rates, but in some cases there appear to be discrepancies. These discrepancies involve many of the data for which one end of the baseline is either Quincy (California), Huahine (French Polynesia), or Simosato (Japan). A method for looking at the discrepancies for these SLR observatories has been devised which makes it possible to calculate the motion not modeled by the geologic information.

Harrison, C. G. A.↗

Fifteen Years of Millimeter Accuracy Lunar Laser Ranging with APOLLO: Data Reduction and Calibration

The Apache Point Lunar Laser-ranging Operation (APOLLO) has been collecting lunar range measurements for 15 yr at millimeter accuracy. The median nightly range uncertainty since 2006 is 1.7 mm. A recently added Absolute Calibration System (ACS), providing an independent assessment of APOLLO system accuracy and the capability to correct lunar range data, revealed a ∼0.4% (10 ps) systematic error in the calibration of one piece of hardware that has been present for the entire history of APOLLO. The application of ACS-based timing corrections suggests systematic errors are reduced to <1 mm, such that overall data accuracy and precision are both ∼1 mm. This paper describes the processing of APOLLO/ACS data that converts photon-by-photon range measurements into the aggregated normal points that are used for science analyses. Additionally, we present methodologies to estimate timing corrections for range data lacking contemporaneous ACS photons, including range data collected prior to installation of the ACS. We also provide access to the full 15 yr archive of APOLLO normal points (2006 April 6–2020 December 27).

LLR↗

Earth rotation parameters from an on-site study of laser ranging data

A multi-faceted effort was maintained to achieve the following goals: (1) provide for state-of-the-art, on-site, near-real-time Earth orientation parameter determinations at levels of precision and accuracy commensurate with a 'quick-look' type of an analysis, using the lunar laser ranging (LLR) data type from the McDonald Laser Ranging Station (MLRS) and other LLR facilities around the world; (2) create a state-of-the-art, highly transportable, LLR-based Earth orientation solution package, which could be easily implemented at LLR facilities other than the MLRS; (3) accommodate, within the routine MLRS lunar range prediction and Earth orientation data analysis software packages, the standard set of Jet Propulsion Laboratory (JPL) Solar System ephemerides, lunar librations, and Solar System partial derivatives; and (4) examine, wherever possible, opportunities for the performance of state-of-the-art, on-site, joint, simultaneous, quick-look analysis for Earth orientation parameters, using both MLRS lunar and LAGEOS (and, perhaps, Etalon) ranging observations, as well as from multiple LLR station observations. Excellent results were obtained at all levels of effort and it can be said that all of these goals were attained. The reader is referred to the complete series of our semi-annual reports for a full description of our efforts.

Shelus, Peter J.↗

Combined Infrared Stereo and Laser Ranging Cloud Measurements from Shuttle Mission STS-85

Multiangle remote sensing provides a wealth of information for earth and climate monitoring, such as the ability to measure the height of cloud tops through stereoscopic imaging. As technology advances so do the options for developing spacecraft instrumentation versatile enough to meet the demands associated with multiangle measurements. One such instrument is the infrared spectral imaging radiometer, which flew as part of mission STS-85 of the space shuttle in 1997 and was the first earth- observing radiometer to incorporate an uncooled microbolometer array detector as its image sensor. Specifically, a method for computing cloud-top height with a precision of +/- 620 m from the multispectral stereo measurements acquired during this flight has been developed, and the results are compared with coincident direct laser ranging measurements from the shuttle laser altimeter. Mission STS-85 was the first space flight to combine laser ranging and thermal IR camera systems for cloud remote sensing.

Lancaster, R. S.↗