Search NASA⌕ Search

SEARCH · Search NASA

Results for “ligand exchange”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Designing Magnetic Properties in CrSBr through Hydrostatic Pressure and Ligand Substitution

Abstract Magnetic van der Waals (vdW) materials are a promising platform for producing atomically thin spintronic and optoelectronic devices. The A‐type antiferromagnet CrSBr has emerged as a particularly exciting material due to its high magnetic ordering temperature, semiconducting electrical properties, and enhanced chemical stability compared to other vdW magnets. Exploring mechanisms to tune its magnetic properties will facilitate the development of nanoscale devices based on vdW materials with designer magnetic properties. Here it is investigated how the magnetic properties of CrSBr change under pressure and ligand substitution. Pressure compresses the unit cell, increasing the interlayer exchange energy while lowering the Néel temperature. Ligand substitution, realized synthetically through Cl alloying, anisotropically compresses the unit cell and suppresses the Cr‐halogen covalency, reducing the magnetocrystalline anisotropy energy and decreasing the Néel temperature. A detailed structural analysis combined with first‐principles calculations reveals that alterations in the magnetic properties are intricately related to changes in direct Cr–Cr exchange interactions and the Cr–anion superexchange pathways. Further, it is demonstrated that Cl alloying enables chemical tuning of the interlayer coupling from antiferromagnetic to ferromagnetic, which is unique among known two‐dimensional magnets.

Telford, Evan J.↗

Mitigating cerium migration for perfluorosulfonic acid membranes using organic ligands

Improving the electrochemical stability of proton exchange membranes is a pressing priority for heavy-duty fuel cell vehicles. The lifetime of the most widely used perfluorosulfonic acid membranes is limited by reactive free radicals generated inside the system. Cerium has been found to reduce the chemical degradation of the membranes. However, cerium migration during fuel cell operation limits the chemical durability enhancement effect expected from the radical scavenging activity of cerium. Here we investigate a wide range of organic immobilizers for cerium, measuring their suitability concerning cerium retention, radical scavenging activity, and fuel cell performance. Further, we report that partially fluorinated phosphonic acids enhance cerium retention up to 45 times and reduce fluoride emission rate by 38% compared to the commercial Nafion™ XL membrane pre-impregnated with cerium. The energetics of cerium-phosphonic acid complex systems by density functional theory calculations rationalizes effective cerium immobilization.

25 ENERGY STORAGE↗

Mitigating cerium migration for perfluorosulfonic acid membranes using organic ligands

Improving the electrochemical stability of proton exchange membranes is a pressing priority for heavy-duty fuel cell vehicles. The lifetime of the most widely used perfluorosulfonic acid membranes is limited by reactive free radicals generated inside the system. Cerium has been found to reduce the chemical degradation of the membranes. However, cerium migration during fuel cell operation limits the chemical durability enhancement effect expected from the radical scavenging activity of cerium. Here we investigate a wide range of organic immobilizers for cerium, measuring their suitability concerning cerium retention, radical scavenging activity, and fuel cell performance. We report that partially fluorinated phosphonic acids enhance cerium retention up to 45 times and reduce fluoride emission rate by 38% compared to the commercial Nafion™ XL membrane pre-impregnated with cerium. The energetics of cerium-phosphonic acid complex systems by density functional theory calculations rationalizes effective cerium immobilization.

30 DIRECT ENERGY CONVERSION↗

Strong magnetic exchange coupling in Ln 2 metallocenes attained by the trans -coordination of a tetrazinyl radical ligand

A combination of high-performing lanthanide metallocenes and tetrazine-based radical ligands leads to a new series of radical-bridged dinuclear lanthanide metallocenes; [(Cp* 2 Ln III ) 2 (bpytz˙ - )][BPh 4 ] (where Ln = Gd (1), Tb (2), Dy (3) and Y (4); Cp* = pentamethylcyclopentadienyl; bpytz = 3,6-bis(3,5-dimethyl-pyrazolyl)-1,2,4,5-tetrazine). The formation of the radical species is achieved via a controlled, stepwise synthesis and verified in all complexes by X-ray crystallography and SQUID magnetometry, as well as EPR spectroscopy of 4. Through the judicious choice of the Cp* ancillary ligands and by taking advantage of the steric effects imposed by their bulkiness, we were able to promote the trans coordination mode of the bpytz˙ - radical anion that enables stronger magnetic exchange coupling compared to the cis fashion. This yields a J Gd–rad = -14.0 cm -1 in 1, which is the strongest exchange coupling observed in organic monoanionic radical-bridged lanthanide metallocene systems. The strong Ln-rad exchange coupling was further confirmed by high-frequency EPR (HF-EPR) spectroscopy and broken-symmetry (BS) density functional theory (DFT) calculations. Further, this combined with the highly anisotropic nature of Tb III and Dy III ions in 2 and 3, respectively, leads to strong SMM behavior and slow relaxation of the magnetization at zero fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Actinide N-Donor Thermodynamics: Expanding the f-element Covalency Dialogue. Final report

Resolving the chemistry and physics of f-electrons is one of the grand challenges of science for energy technology. A central component of this challenge is describing covalency in actinide-ligand interactions. Crystallography, x-ray spectroscopy and computational techniques have provided reasonable, and in some cases remarkable, support for covalency in actinide-ligand interactions. Courtesy the quality of the results obtained, a significant portion of the covalency dialogue has been forwarded through solid-state and computational studies of the more stable actinides (Th, U, Pu, Np). However; recent reports have questioned whether covalency in actinide interactions increases or decreases across the series. Examination of less-stable trans-actinides (Am, Cm, Bk, Cf and Es) by the aforementioned approaches can be rapidly limited due to material availability, radiological hazards and experimental data to validate computational models. Furthermore, limited thermodynamic data exists to confirm covalency in actinide solution phase interactions that are highly relevant to the remediation and reprocessing of used nuclear fuel. The best-defined interactions of actinides with soft donors in aqueous solutions involve (poly)aminopolycarboxylate (APC) ligands. The chelate effect and binding affinity with the acetic acid APCs subgroups encourages amine interactions with the actinide metal center. In the absence of these factors, amine interactions with actinides are too weak to overcome the protective hydration shell of the dissolved ion. The ability for APCs to force actinide interactions with soft nitrogen donors (as defined by Pearson’s Hard Soft Acid Base theory) encourages the application of these ligands in a variety of processes for actinide recovery from nearly chemically identical lanthanides. The ability to functionalize the amine center of the ligand in a variety of capacities (adding additional amine groups, exchanging the conventional acetate group for an acetate group, etcetera), allows for the APC ligand to serve as a thermodynamic probe for actinide-nitrogen interactions. Perhaps the single most significant breakthrough during the previous funding cycle was the observation that covalency for the transplutonium part of the actinide series can be increasingly influenced with energy degeneracy driven covalency as the actinides become heavier. This was observed most predominantly with dipicolinic acid, but extensions of f-orbital degeneracy were found to affect aliphatic aminopolycarboxylate-actinide complexes through einsteinium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-situ thermodynamics measurements at metal oxides-solution interfaces using Flow Adsorption Microcalorimetry.

Mineral-fluid interfaces are the principal sites of geochemical processes near Earth’s surface, hosting chemical reactions that play a fundamental role in (bio)geochemical cycles and in the fate and transport of anthropogenic contaminants, and that effectively control the compositions of soil and water environments. These complex interfaces are critical for our energy and environmental future. The mineral-fluid interface has been studied in an unprecedented level of detail with both experimental and computational approaches, separately and in combination. However, conspicuously missing from studies of the mineral-fluid interface are direct measurements of the energies of ion sorption and exchange. The literature on energetics and enthalpies of exchange, adsorption, dissolution, precipitation, and surface protonation reactions, especially those directly supported by experimental data, remains scarce despite their fundamental nature. The overarching goal of this project is to complete a systematic study of the thermodynamics properties of interfacial reactions at four MO surfaces (Rutile (α-TiO2), Quartz (SiO2), boehmite (γ-AlOOH) and goethite (α-FeOOH)) through the application and construction of novel flow adsorption microcalorimetry techniques and instrumentations. These unique and specialized microcalorimeters will operate at various temperatures and solution chemical compositions allowing for in-situ measurements across metal oxides and ligands of various characteristics. The overall research goal will be accomplished by completing the following three specific objectives (O): O1) Determine the energetics of surface protonation and deprotonation, ion exchange and ligand sorption reactions; O2) Investigate the surface charge thermodynamic properties under a range of temperature and solution chemical compositions; and O3) Develop predictive trends of the interplay between MO structure, surface coverage and surface reactivity. In addition to key thermodynamics parameters, calorimetric measurements provide a wealth of mechanistic information about reactions energetics and kinetics, surface charge characteristics, and structure-reactivity or selectivity relationships, all obtained in-situ and in real-time. This report includes science highlights from various projects completed over the performance period of the project. Also listed are dissemination opportunities, people supported on the grant and the impact on available physical resources and the discipline as a whole.

58 GEOSCIENCES↗

Anion-exchanged and quaternary ammonium functionalized MIL-101-Cr metal-organic framework (MOF) for ReO 4 – /TcO 4 – sequestration from groundwater

There are few effective technologies for the sequestration of highly water-soluble pertechnetate (TcO 4 – ) from contaminated water despite the urgency of environmental and public health concerns. Here, anion exchanged and cetyltrimethylammonium bromide (CTAB) functionalized MIL-101-Cr-NO 3 were investigated for perrhenate (ReO 4 – ), a surrogate of TcO 4 – , sequestration from artificial groundwater. Cl – , I – , and CF 3 SO 3 – exchanged MIL-101-Cr proved more effective at ReO 4 – removal than the parent MIL-101-Cr-F. Compared to the parent framework, CTAB functionalized MIL-101-Cr-NO 3 increased ReO 4 – removal capacity from 39 to 139 mg/g, improved the reaction kinetics from ~30 to <10 min to reach full adsorption capacity and the selectivity for ReO 4 – over competing NO 3 – , CO 3 2– , SO 4 2– , and Cl – . Spectroscopic data indicated that the chemical speciation of Re in the exchanged MIL-101-Cr remained ReO 4 – , indicating synergistic sequestration through both anion exchange and non-ion exchange binding with the positively charged ligand of CTAB. These studies foreshadow potential applications of MOFs for the remediation of 99 TcO 4 – from contaminated environments.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

An efficient LC-MS method for isomer separation and detection of sugars, phosphorylated sugars, and organic acids

Abstract Assessing central carbon metabolism in plants can be challenging due to the dynamic range in pool sizes, with low levels of important phosphorylated sugars relative to more abundant sugars and organic acids. Here, we report a sensitive liquid chromatography–mass spectrometry method for analysing central metabolites on a hybrid column, where both anion-exchange and hydrophilic interaction chromatography (HILIC) ligands are embedded in the stationary phase. The liquid chromatography method was developed for enhanced selectivity of 27 central metabolites in a single run with sensitivity at femtomole levels observed for most phosphorylated sugars. The method resolved phosphorylated hexose, pentose, and triose isomers that are otherwise challenging. Compared with a standard HILIC approach, these metabolites had improved peak areas using our approach due to ion enhancement or low ion suppression in the biological sample matrix. The approach was applied to investigate metabolism in high lipid-producing tobacco leaves that exhibited increased levels of acetyl-CoA, a precursor for oil biosynthesis. The application of the method to isotopologue detection and quantification was considered through evaluating 13C-labeled seeds from Camelina sativa. The method provides a means to analyse intermediates more comprehensively in central metabolism of plant tissues.

Plant Sciences↗

Investigation and Analysis of Dolomite Dissolution in Variable Strength Systems Relevant to the WIPP

The Waste Isolation Pilot Plant (WIPP) was opened in 1999 as a solution to the long-term disposal of the nation's nuclear defense-generated transuranic (TRU) waste. The salt beds were recommended as the ideal location because they are free from flowing fresh water, easily mined, impermeable, and geologically stable. However, for performance assessment modeling, release scenarios must be considered. The most likely release scenario was determined to be human intrusion leading to direct and/or long-term brine release (US DOE 1995, US DOE 1996, Perkins et al., 1999). The focus of this research is the Rustler formation because it is located above the WIPP and is the most transmissive layer (Perkins et al., 1999). Objective: To determine the effect of chelating ligands ( e.g. EDTA) on dissolution of dolomite in high ionic strength systems. Do brines impact dolomite dissolution and how is it affected by EDTA binding with cations? By varying the ionic strengths, different brine conditions can be simulated similar to those in and around the Culebra member and evaluate trends of dissolved Ca and Mg in the aqueous phase from the quantified data. Conclusions: <2% of dolomite dissolved over one week at pH 8.5. Greater dissolution occurred at higher ionic strength and in the presence of NaCl with approximately 0.4 vs. 0.9% of Mg removed from dolomite in 0.1 and 1.0 M Na. Further, 0.3 vs. 0.9% of Mg was removed from dolomite in 1.0 M IS CaCl{sub 2} versus NaCl. EDTA increased dissolution of dolomite at low ionic strength due to its strong complexation affinity for Ca/Mg with slightly greater removal of Ca than Mg. Significant differences were not observed at high ionic strength due to the presence of large concentrations of competing cations (Na, Ca, Mg). Slightly higher concentrations of Ca were removed from dolomite than Mg after one week, suggesting either incongruent dissolution or release through ion exchange of Ca from trace mineral impurities. Further, when EDTA was present, it may have increased Ca removal due to its greater complexation for Ca than Mg. Environmental Implications: High ionic strength brines and low ionic strength solutions with organic ligands increase dissolution of dolomite. Due to the long half-lives of radionuclides in the TRU waste, it may be important to consider the long term impact of dolomite dissolution for potential release scenarios.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Hydration structure and water exchange kinetics at xenotime–water interfaces: implications for rare earth minerals separation

Hydration of surface ions gives rise to structural heterogeneity and variable exchange kinetics of water at complex mineral–water interfaces. In this work, we employ ab initio molecular dynamics (AIMD) simulations and water adsorption calorimetry to examine the aqueous interfaces of xenotime, a phosphate mineral that contains predominantly Y 3+ and heavy rare earth elements. Consistent with natural crystal morphology, xenotime is predicted to have a tetragonal prismatic shape, dominated by the {100} surface. Hydration of this surface induces multilayer interfacial water structures with distinct OH orientations, which agrees with recent crystal truncation rod measurements. The exchange kinetics between two adjacent water layers exhibits a wide range of underlying timescales (5–180 picoseconds), dictated by ion–water electrostatics. Adsorption of a bidentate hydroxamate ligand reveals that {100} xenotime surface can only accommodate monodentate coordination with water exchange kinetics strongly depending on specific ligand orientation, prompting us to reconsider traditional strategies for selective separation of rare-earth minerals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Origin of Ferromagnetic Exchange Coupling in Donor–Acceptor Biradical Analogues of Charge-Separated Excited States

A new donor–acceptor biradical complex, Tp Cum,Me Zn(SQ-VD) (Tp Cum,Me Zn + = zinc(II) hydro-tris(3-cumenyl-5-methylpyrazolyl)borate complex cation; SQ = orthosemiquinone; VD = oxoverdazyl), which is a ground-state analogue of a charge-separated excited state, has been synthesized and structurally characterized. Here, the magnetic exchange interaction between the S = 1/2 SQ and the S = 1/2 VD within the SQ-VD biradical ligand is observed to be ferromagnetic, with $J_{SQ-VD}$ = +77 cm –1 (H = -2$J_{SQ-VD}\bar{S}_{SQ}·\bar{S}_{VD}$) determined from an analysis of the variable-temperature magnetic susceptibility data. The pairwise biradical exchange interaction in Tp Cum,Me Zn(SQ-VD) can be compared with that of the related donor–acceptor biradical complex Tp Cum,Me Zn(SQ-NN) (NN = nitronyl nitroxide, S = 1/2), where $J_{SQ-NN}$ ≅ +550 cm –1 . This represents a dramatic reduction in the biradical exchange by a factor of ~7, despite the isolobal nature of the VD and NN acceptor radical SOMOs. Computations assessing the magnitude of the exchange were performed using a broken-symmetry density functional theory (DFT) approach. These computations are in good agreement with those computed at the CASSCF NEVPT2 level, which also reveals an S = 1 triplet ground state as observed in the magnetic susceptibility measurements. A combination of electronic absorption spectroscopy and CASSCF computations has been used to elucidate the electronic origin of the large difference in the magnitude of the biradical exchange coupling between Tp Cum,Me Zn(SQ-VD) and Tp Cum,Me Zn(SQ-NN). A Valence Bond Configuration Interaction (VBCI) model was previously employed to highlight the importance of mixing an SQ SOMO → NNLUMO charge transfer configuration into the electronic ground state to facilitate the stabilization of the high-spin triplet (S = 1) ground state in Tp Cum,Me Zn(SQ-NN). Here, CASSCF computations confirm the importance of mixing the pendant radical (e.g., VD, NN) LUMO (VD LUMO and NN LUMO ) with the SOMO of the SQ radical (SQ SOMO ) for stabilizing the triplet, in addition to spin polarization and charge transfer contributions to the exchange. An important electronic structure difference between Tp Cum,Me Zn(SQ-VD) and Tp Cum,Me Zn(SQ-NN), which leads to their different exchange couplings, is the reduced admixture of excited states that promote ferromagnetic exchange into the Tp Cum,Me Zn(SQ-VD) ground state, and the intrinsically weaker mixing between the VD LUMO and the SQ SOMO compared to that observed for Tp Cum,Me Zn(SQ-NN), where this orbital mixing is significant. The results of this comparative study contribute to a greater understanding of biradical exchange interactions, which are important to our understanding of excited-state singlet–triplet energy gaps, electron delocalization, and the generation of electron spin polarization in both the ground and excited states of (bpy)Pt(CAT-radical) complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multi-Spectroscopic Determination of Exchange Coupling, Zero-Field Splitting, and g-Matrices in Radical-Bridged Dinuclear Fe(III) Complexes

When the energy gap, Δ, between the lowest-lying spin manifolds within a spin-exchange coupled molecule approaches Δ/k B ≈ 300 K, the traditional temperature-dependence (T < 400 K) of the molar magnetic susceptibility is not always a reliable way to obtain a good estimate of intramolecular exchange couplings. We develop a spectroscopic approach capable of accurately parametrizing complex magnetic Hamiltonians by exploiting the separation of the anisotropy and exchange energy scales in strongly coupled magnetic molecules. Specifically, we combine inelastic neutron scattering, high-frequency electron paramagnetic resonance, far-infrared magneto-spectroscopy and magnetometry, and obtain detailed information about the magnetic properties of a series of diiron complexes derived from [[Fe(cth)] 2 (dxbq)] 3+ (H 2 dxbq: 2,5-dihydroxy-1,4-benzoquinone (x = h) or 3,6-dichloro-2,5-dihydroxy-1,4-benzoquinone (x = c), cth: 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane). Well-isolated S = 9/2 ground states emerge due to strong direct antiferromagnetic exchange between the Fe 3+ centers (S = 5/2) and the radical bridging benzoquinone ligand (S = 1/2). The specific sensitivities and transition selection rules of the applied methods allow us to determine the parameters of the microscopic Hamiltonian including exchange coupling, fourth-order Stevens operators and g-factors. Our methodology is directly portable to other strongly coupled molecular compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Long-Range Allosteric Communication Modulated by Active Site Mn(II) Coordination Drives Catalysis in Xanthobacter autotrophicus Acetone Carboxylase

Acetone carboxylase (AC) from Xanthobacter autotrophicus is a 360 KDa α2β2γ2 heterohexamer that catalyzes the ATP-dependent formation of phosphorylated acetone and bicarbonate intermediates that react at Mn(II) metal active sites to form acetoacetate. Structural models of X. autotrophicus AC (XaAC) with and without nucleotides reveal that the binding and phosphorylation of the two substrates occurs ~40 Å from the Mn(II) active sites where acetoacetate is formed. Based on the crystal structures, a significant conformational change was proposed to open and close a tunnel that facilitates the passage of reaction intermediates between the sites for nucleotide binding and phosphorylation of substrates and Mn(II) sites of acetoacetate formation. We have employed electron paramagnetic resonance (EPR), kinetic assays, and hydrogen/deuterium exchange mass spectrometry (HDX-MS) of poised ligand-bound states and site-specific amino acid variants to complete an in-depth analysis of Mn(II) coordination and allosteric communication throughout the catalytic cycle. In contrast with the established paradigms for carboxylation, our analyses of XaAC suggested a carboxylate shift that couples both local and long-range structural transitions. Shifts in the coordination mode of a single carboxylic acid residue (αE89) mediate both catalysis proximal to a Mn(II) center and communication with an ATP active site in a separate subunit of a 180 kDa α2β2γ2 complex at a distance of 40 Å. This work demonstrates the power of combining structural models from X-ray crystallography with solution-phase spectroscopy and biophysical techniques to elucidate functional aspects of a multi-subunit enzyme.

Biochemistry & Molecular Biology↗

Competitive exchange between divalent metal ions [Cu(II), Zn(II), Ca(II)] and Hg(II) bound to thiols and natural organic matter

Mercuric Hg(II) ion forms exceptionally strong complexes with various organic ligands, particularly thiols and dissolved organic matter (DOM) in natural water. Few studies, however, have experimentally determined whether or not the presence of base cations and transition metal ions, such as Ca(II), Cu(II), and Zn(II), would compete with Hg(II) bound to these ligands, as concentrations of these metal ions are usually orders of magnitude higher than Hg(II) in aquatic systems. Different from previous model predictions, a significant fraction of Hg(II) bound to cysteine (CYS), glutathione (GSH), or DOM was found to be competitively exchanged by Cu(II), but not by Zn(II) or Ca(II). About 20–75% of CYS-bound-Hg(II) [at 2:1 CYS:Hg(II)] and 14–40% of GSH-bound-Hg(II) [at 1:1 GSH:Hg(II)] were exchanged by Cu(II) at concentrations 1–3 orders of magnitude greater than Hg(II). Competitive exchange was also observed between Cu(II) and Hg(II) bound to DOM, albeit to a lower extent, depending on relative abundances of thiol and carboxylate functional groups on DOM and their equilibrium time with Hg(II). When complexed with ethylenediaminetetraacetate (EDTA), most Hg(II) could be exchanged by Cu(II) and Zn(II), as well as Ca(II) at increasing concentrations. Furthermore, these results shed additional light on competitive exchange reactions between Hg(II) and coexisting metal ions and have important implications in Hg(II) chemical speciation and biogeochemical transformation, particularly in contaminated environments containing relatively high concentrations of Hg(II) and metal ions.

36 MATERIALS SCIENCE↗

M IV /Co –I (M = Zr, Hf) Bis(phosphinoamide) Complexes with η 6 - and η 4 -Arenes

Despite their relevance to catalysis, low-/subvalent cobalt complexes are difficult to synthesize and isolate. Consequently, very few “cobaltate” complexes are known and there is a lack of architectural diversity in this field. Lewis acidic d 0 group IV metals have been demonstrated to stabilize Co –I centers via metal–metal bonds. Herein, we report the synthesis of bis(phosphinoamide) heterobimetallic M IV /Co –I arene complexes (M = Zr, Hf). The driving force to maintain the aromaticity of the arenes dictates the hapticity of the Co-bound arene ligands and influences the binding arrangement of the phosphinoamide ligands. Benzene and toluene were observed to bind η 6 to the Co –I center, forcing dissociation of one of the phosphinoamide ligands, whereas η 4 -coordination of anthracene allows both phosphinoamide ligands to remain bound to the Co center. The identity of both the arene and the group IV metal ion starkly influence the lability of the arene. For instance, the Co-bound benzene ligand in the Zr IV /Co –I benzene complex rapidly exchanges with C 6 D 6 in solution, whereas toluene/C 6 D 6 exchange is much slower and appreciable C 6 H 6 /C 6 D 6 exchange is not observed for the Hf analogue. The Zr IV /Co –I benzene complex loses benzene upon repeated exposure to vacuum to form an arene-free tetrametallic dimer.

aromatic compounds↗