Search NASA⌕ Search

SEARCH · Search NASA

Results for “line intensity ratios”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Radiating properties of solar plasmas

Using a series of 14 previously obtained empirical emission measure distributions and a number of spectral lines observed by the SMM and P78-1 instruments, the total power radiated by a hot plasma is compared to that radiated by individual spectrum lines. Results are presented for different choices of ionization balance and power loss functions. The results indicate that for some lines such as the C IV resonance doublet at 1548 A and 1550 A, the ratio of the line intensity to the total radiated power varied only over a factor of 2, suggesting that well-calibrated measurements of a single line intensity may provide a fairly good estimation of the total radiated power output from the solar plasma.

Bruner, M. E.↗
NASA NTRS1992

CW laser strategies for simultaneous, multi-parameter measurements in high-speed gas flows

Strategies utilizing continuous wave (CW) lasers are considered which are capable of simultaneously measuring the flow parameters of velocity, temperature, and pressure at sampling rates exceeding 3 kHz. Velocity is determined from the Doppler shift of the spectral profile, temperature is extracted from intensity ratios of multiple lines, and pressure is measured from either the collision of broadening or the magnitude of absorption. Distinctions between strategies concern the specifics of probe spacies (NO, OH, O2, and H2O) in terms of nominal probe wavelength, equipment, and detection scheme. CW lasers were applied to path-integrated absorption measurements of transient shock-tube flows and spatially resolved laser-induced fluorescence measurements of underexpanded jets.

Di Rosa, M. D.↗
NASA NTRS1995

Late-time spectra and type Ia supernova models: New clues from the Hubble Space Telescope

Calculated late-time spectra of two classical hydrodynamical models for Type Ia supernovae (deflagration model W7 of Nomoto, Thielemann, & Yokoi, and delayed detonation model DD4 of Woosley & Weaver) are compared with observations of SN 1992A and other spectroscopically normal SNe Ia. An important new piece of information is provided by observations done with the Hubble Space Telescope (HST) which cover the ultraviolet range at the nebular phase of a SN Ia: SN 1992A in NGC 1380. For the first time a picture of SN Ia emission from the ultraviolet through the optical is obtained at these phases. Predictions of the classical model (W7 and DD4) are compared with the observed spectrum of SN 1992A and with the optical spectra of SN 1989M in NGC 4579 and SN 1990N in NGC 4639 at similar epochs. The absolute B and V magnitudes of the models are also estimated at these late phases. Taken at face value the nebular spectra of these 'classical' models are more consistent with the long extragalactic distance scale, pointing to distances to NGC 4579 around 21 +/- 3 Mpc and a slightly larger distance, 22 +/- 3 Mpc, to NGC 4639, on the back side of the Virgo Cluster. However, the calculated Fe(+3) luminosity as predicted from the models exceeds the observed limit from the HST data of SN 1992A. Other differences in the ratios of the line intensities between calculated and observed spectra, show some disagreement with the observed spectra at the nebular phases. They may not be the best choice for spectroscopically normal SNe Ia, and their use as an independent calibration of the extragalactic distance scale should be viewed with caution.

Ruiz-Lapuente, P.↗
NASA NTRS1986

The density and thickness of quiescent prominences

The electron density was determined for a number of quiescent prominences at various positions from the Stark effect. It was found that the intensity ratio of Mg I emission lines to SrII lines is independent of the observed electron density in the range of ten to the 10.2 power to 10 to the 11.4 power cm-3. This contrasts with Landman's (1984) theoretical expectation that the ratio is proportional to the electron density. From the intensity of Balmer lines and the electron density, it is inferred that the true diameter of a thread in prominence of high electron density may be smaller than 0.2". The averaged total number density of hydrogen N sub H sub of was found to be 3-6 times 10 to the 11th power cm-3, leading to a total gas pressure P =0.6 dyn cm-2 and a total density of approx. 10 to the minus twelth power g cm-3. Landman's large value of N sub H approx. 6 times 10 to the 12th power and P sub g approx. 6 may have resulted either from the fact that he has treated very bright prominences and/or from the derivation of the high electron density for all prominences he studied.

Hirayama, Tadashi↗
NASA NTRS2024

Modeling Soft X‐Ray Emissions at the Dayside Magnetopause

In this study, we simulate the Solar Wind Charge Exchange (SWCX) soft X-ray emissions at dayside magnetosheath and cusps by using magnetohydrodynamic (MHD) and LAtmos TEst Particle (LaTeP) models. MHD models are unable to resolve the particle kinetic effects, such as the different behaviors of ions with different q/m, or distinguish the magnetospheric plasma from the solar wind plasma. We investigate these effects with the LaTeP model. As the LaTeP model does not self-compute magnetic and electric field, the magnetic and electric field data obtained from Open Geospace General Circulation Model (OpenGGCM) and Lagrangian version of the piecewise parabolic method (PPMLR) MHD model are used as the input to LaTeP model. The soft X-ray emissivity maps simulated from pure OpenGGCM and PPMLR MHD approaches and from LaTeP-OpenGGCM and LaTeP-PPMLR approaches are presented and compared. The results indicate that the LaTeP model can well resolve the kinetic effects and can be used to investigate the individual spectral characteristics. Therefore, the LaTeP model is a complementary approach for simulating the X-ray emissions near the dayside magnetopause. We also calculate the ratio of integrated OVII/OVIII line intensities, produced by charge exchange of O7+ ions and O8+ ions, respectively. We find a relatively higher ratio at the bow shock compared to the surrounding areas, suggesting that this ratio can be an effective parameter to identify the bow shock location.

Qiuyu Xu↗
NASA NTRS1995

Atomic far-IR fine-structure line mapping of L1630, M17, and W3: Comparison of (O I) and (C II) distributions

We mapped the distribution of atomic far-IR line emission from (O I) and (C II) over parsec scales in the Galactic star-forming regions L1630, M17, and W3 using the MPE Far-Infrared Fabry-Perot Imaging spectrometer (FIFI) on board the NASA Kuiper Airborne Observatory. The lines mapped include (O I) 63 microns, (O I) 146 microns, and (C II) 158 microns. Comparison of the intensities and ratios of these lines with models of photodissociation regions (e.g., Tielens & Hollenbach 1985, ApJ, 344, 770) allows us to derive temperatures and densities of the primarily neutral atomic gas layers lying on the surfaces of UV-illuminated molecular gas. In general, the (C II) line arises ubiquitously throughout the molecular clouds while the (O I) lines are mainly confined to warm, dense gas (T is greater than 100 K, n is greater than 10(exp 4)/cu cm) near the sites of O and B stars. The distribution of (C II) in the star-forming clouds implies that the (C II) emission arises on the surfaces of molecular clumps throughout the clouds, rather than only at the boundary layer between molecular gas and H II regions.

Howe, J. E.↗
NASA NTRS1978

Hydrogen emission-line spectra in quasars and active galactic nuclei

An attempt is made to account for the observational fact that the intensity ratios of the lower Balmer lines seen in emission from QSOs, type 1 Seyfert galaxies, and other related active galaxies are not what would be expected from the conventional picture of lines generated in a recombining hydrogen plasma. Previous observations of emission-line intensities in QSOs and Seyfert galaxies are reviewed. The various processes included in the rate coefficients of the calculations are then described, viz., free-free, bound-free, and bound-bound transitions, radiative transfer, and angular-momentum mixing. The strengths of the various emission lines are calculated by using more accurate values for the transition rates, including excitation and deexcitation simultaneously, and providing for finite rates in optically forbidden transitions. Numerical results are presented for the cases of ground-state collisional excitation, reabsorption of the upper Balmer lines, and collisional deexcitation. The results are applied to construct a model for the emission-line gas in a QSO and to discuss limits on models of Seyfert galaxies.

Krolik, J. H.↗
NASA NTRS1991

Infrared recombination lines of hydrogen from young objects in the southern Galactic plane

Near infrared recombination lines of hydrogen are observed in twelve young objects in the southern Galactic plane. The sample includes Herbig-Haro objects and IRAS dark-cloud point sources from the 1987 catalog of Persson and Campbell. In four of the IRAS sources two or three infrared lines are measured, and their intensity ratios are consistent with models of optically thick ionized winds. The intrinsic line shapes, retrieved from maximum-entropy deconvolutions, indicate gas velocities of 100 km/s or more as expected from ionized winds. These sources are apparently embedded pre-main-sequence objects with outflows. They include some of the brightest known YSOs.

Beck, Sara C.↗
NASA NTRS1994

Solar coronal temperature diagnostics using emission line from multiple stages of ionization of iron

We obtained spatially resolved extreme-ultraviolet (EUV) spectra of AR 6615 on 1991 May 7 with NASA/ Goddard Space Flight Center's Solar EUV Rocket Telescope and Spectrograph (SERTS). Included are emission lines from four different stages of ionization of iron: Fe(+15) lambda 335 A, Fe(+14) lambda 327 A, Fe(+13) lambda 334 A, and Fe(+12) lambda 348 A. Using intensity ratios from among these lines, we have calculated the active region coronal temperature along the Solar Extreme Ultraviolet Telescope and Spectrograph (SERTS) slit. Temperatures derived from line ratios which incorporate adjacent stages of ionization are most sensitive to measurement uncertainties and yield the largest scatter. Temperatures derived from line ratios which incorporate nonadjacent stages of ionization are less sensitive to measurement uncertainties and yield little scatter. The active region temperature derived from these latter ratios has an average value of 2.54 x 10(exp 6) K, with a standard deviation approximately 0.12 x 10(exp 6) K, and shows no significant variation with position along the slit.

Brosius, Jeffrey W.↗
NASA NTRS1983

Atomic calculations for Ca XVII - UV and X-ray lines

Doschek et al. (1977) have pointed out the importance of the Ca XVII UV lines as an electron density diagnostic. Energy levels, transition probabilities, and collision strengths, are presently obtained for the 2s2, 2s 2p, 2p2, 2s 3s, 2s 3p, and 2s 3d configurations of Ca XVII, and the theoretical intensity ratios for the UV and X-ray lines are compared with observed intensities in solar flare spectra. Inconsistencies are indicated in the analysis of UV data, and discrepancies between observed and theoretical intensity ratios indicate that further studies are required. New identifications are suggested in the X-ray wavelength region.

Bhatia, A. K.↗
NASA NTRS1994

The plasma structure of the north-east rim of the Cygnus Loop as observed with ASCA

We present the first results from Advanced Satellite for Cosmology and Astrophysics (ASCAS) observations of the Cygnus Loop. A 22 min square of the north-east rim was observed. The imaging capability of ASCA permits clear indentification of the shock front structure. The energy resolving power of ASCA in the energy band between 0.5 keV to 10 keV reveals several emission lines from oxygen to silicon. The intensity ratio between the O VIII and O VII emission lines demonstrates that the plasma has not reached collisional ionization equilibrium. A nonequilibrium ionization model is applied to determine the gradients both in electron temperature T(sub e), and in electron density n(sub e). T(sub e) ranges from 0.22 keV at the shock front to 0.30 keV at 17 min inside the shock front. n(sub e) can be represented as a power law function of radius with an index of about 6 at an ambient gas density of 0.5 cm(exp -3). The plasma parameter n(sub e)t is about 2 x 10(exp 11) cm(exp -3), resulting in an age of about 20000 yr for the Loop.

Miyata, Emi↗
NASA NTRS1973

The effect of Fe I absorption on the Mg II emission at 2795 A in alpha Orionis

The Fe I absorption line at 2795.01 A is derived from the observations of Mg II resonance emission in alpha Orionis by Kondo et al (1972). A spectrum is synthesized, including Mg II emission and self-absorption and also Fe I absorption, which accounts for the observed asymmetry in the Mg II 2795.5 line and for the discrepancy between the theoretical and observed intensity ratios of the two Mg II lines. The astrophysical significance of this strong Fe I absorption is discussed.

Modisette, J. L.↗
NASA NTRS1994

Explosion Calculations of SN1087

Explosion calculations of SNT1987A generate pictures of Rayleigh-Taylor fingers of radioactive Ni-56 which are boosted to velocities of several thousand km/s. From the KAO observations of the mid-IR iron lines, a picture of the iron in the ejecta emerges which is consistent with the "frothy iron fingers" having expanded to fill about 50% of the metal-rich volume of the ejecta. The ratio of the nickel line intensities yields a high ionization fraction of greater than or equal to 0.9 in the volume associated with the iron-group elements at day 415, before dust condenses in the ejecta. From the KAO observations of the dust's thermal emission, it is deduced that when the grains condense their infrared radiation is trapped, their apparent opacity is gray, and they have a surface area filling factor of about 50%. The dust emission from SN1987A is featureless: no 9.7 micrometer silicate feature, nor PAH features, nor dust emission features of any kind are seen at any time. The total dust opacity increases with time even though the surface area filling factor and the dust/gas ratio remain constant. This suggests that the dust forms along coherent structures which can maintain their radial line-of-sight opacities, i.e., along fat fingers. The coincidence of the filling factor of the dust and the filling factor of the iron strongly suggests that the dust condenses within the iron, and therefore the dust is iron-rich. It only takes approximately 4 x 10(exp -4) solar mass of dust for the ejecta to be optically thick out to approximately 100 micrometers; a lower limit of 4 x 10(exp -4) solar mass of condensed grains exists in the metal-rich volume, but much more dust could be present. The episode of dust formation started at about 530 days and proceeded rapidly, so that by 600 days 45% of the bolometric luminosity was being emitted in the IR; by 775 days, 86% of the bolometric luminosity was being reradiated by the dust. Measurements of the bolometric luminosity of SN1987A from 1000 - 1800 days are based on 10 micrometers and 20 micrometers photometry and rely on the suppositions that the IR emission is a greybody (proven to be true by the KAO observations at 615 and 775 days) and that the dust temperature drops to and remains at 150 K. The late time bolometric luminosity is stronger than that expected from the radioactive decay of Co-56, Co-57, Ti-44, and Na-22 and the possibility of an embedded compact object will be discussed.

Wooden, Diane H.↗
NASA NTRS1976

Limb-brightening observations from the OSO-7 satellite. II - Comparison of Abel-inverted intensities of Fe XIV and Fe XIII EUV emission lines with predictions

Intensities of Fe XIV and Fe XIII EUV emission lines obtained at coronal locations beyond the limb by the Goddard spectroheliograph on the OSO 7 satellite have been corrected for the wavelength dependence of the instrument's sensitivity and have been Abel-inverted to provide a valid comparison with theoretical predictions for each ion. Details of the Abel-inversion procedure are given, including explicit formulas for application of Bracewell's (1956) method. The intensity ratios of pairs of lines originating from a common level are compared with expected theoretical transition probability ratios over a range of heliocentric distance; deviations in some cases yield information about adjacent unclassified lines. Comparison of the observations with predictions for Fe XIV and Fe XIII shows generally good agreement, with a few interesting discrepancies that may imply a corresponding need for more accurate collisional excitation cross sections. The same comparison yields the variation of electron density with heliocentric radius for each ion separately; the two density functions are found to agree within a factor of three.

Kastner, S. O.↗
NASA NTRS1991

Rapid tuning CW laser technique for measurements of gas velocity, temperature, pressure, density, and mass flux using NO

An intracavity-doubled rapid-tuning CW ring dye laser was used to acquire fully resolved absorption profiles of NO line pairs in the A-X band at 225 nm at a rate of 4 kHz. These profiles were utilized for simultaneous measurements of flow parameters in the high-speed 1D flows generated in a shock tube. Velocity was determined from the Doppler shift, measured using a pair of profiles simultaneously acquired at different angles with respect to the flow direction. Temperature was determined from the intensity ratio of the adjacent lines. Pressure and density were found both from the collisional broadening and the fractional absorption. From this information the mass flux was determined. The results compare well to 1D shock calculations.

Chang, Albert Y.↗
NASA NTRS1995

KAO observations of SN1987A

Explosion calculations of SN1987A generate pictures of Rayleigh-Taylor fingers of radioactive Ni-56 (Ni-56 yields Co-56 yields Fe-56) which are boosted to velocities of several thousand km/s. From the KAO observations of the mid-IR iron lines, a picture of the iron in the ejecta emerges which is consistent with the 'frothy iron fingers' having expanded to fill about 50% of the metal-rich volume of the ejecta (nu(sub m) less than or equal to 2500 km/s). The ratio of the nickel line intensities I(sub (Ni I)7.5 micron)/I(sub (Ni II)6.6 microns) yields a high ionization fraction of x(sub Ni) greater than or equal to 0.9 in the volume associated with the iron-group elements at day 415, before dust condenses in the ejecta. From the KAO observations of the dust's thermal emission (2 microns to 100 microns), it is deduced that when the grains condense, their infrared radiation is trapped, their apparent opacity is gray, and they have a surface area filling factor of about 50%. The dust emission from SN1987A is featureless: no 9.7 micron silicate feature, nor PAH features, nor dust emission features of any kind are seen at any time. The total dust opacity increases with time even though the surface area filling factor and the dust/gas ratio remain constant. This suggests that the dust forms along coherent structures which can maintain their radial line-of-sight opacities, i.e., along fat fingers. The coincidence of the filling factor of the dust and the filling factor of the iron strongly suggests that the dust condenses within the iron, and therefore the dust is iron-rich. It only takes approximately 10(exp -4) solar mass of dust for the ejecta to be optically thick out to approximately 100 microns; a lower limit of 4 x 10(exp -4) solar mass of condensed grains exists in the metal-rich volume, but much more dust could be present. The episode of dust formation started at about 539 days and proceeded rapidly, so that by 600 days 45% of the bolometric luminosity was being emitted in the IR; by 775 days, 86% of the bolometric luminosity was being reradiated by the dust. Measurements of the bolometric luminosity of SN1987A from 1000 to 2300 days are based on 10 micron and 20 micron photometry and rely on the suppositions that the IR emission is a graybody (proven to be true by the KAO observations at 615 and 775 days) and that the dust temperature drops to and remainsat 150 K. The late-time bolometric luminosity is stronger than that expected from the radioactive decay of Co-56, Co-57, Ti-44, and Na-22 and the late-time dust temperatures are consistent with the presence of a compact object.

Wooden, Diane H.↗
NASA NTRS1993

How reliable are coronal hole temperatures deduced from observations?

Given the importance of the temperature at the base of the corona for the modeling of the solar wind, we investigate the range of temperatures which have been deduced from remote measurements in coronal holes, within a heliocentric distance of 1.6 solar radii, and the accuracy to which these temperatures have been inferred. Results are presented from an analysis of EUV observations made simultaneously in three spectral lines at the limb in a polar coronal hole, with little contamination from quiet region emission. A temperature range of 7.8-9.3 x 10 exp 5 K is obtained, between 1.02 to 1.07 solar radii for the coronal hole, with a very different temperature range of 9.4 x 10 exp 5 - 1.2 x 10 exp 6 K for the quiet regions bordering it. Inhomogeneities within the coronal hole contribute to a 14 percent variation in inferred temperature. The elemental abundance, which is one of the parameters that influence the temperature inference, can in turn be significantly constrained when intensity ratios from three spectral lines are used.

Habbal, S. R.↗