Search NASA⌕ Search

SEARCH · Search NASA

Results for “low-cost”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

An improved version of the table look-up algorithm for pattern recognition

The table look-up approach to pattern recognition has been used for 3 years at several research centers in a variety of applications. A new version has been developed which is faster, requires significantly less core memory, and retains full precision of the input data. The new version can be used on low-cost minicomputers having 32K words (16 bits each) of core memory and fixed-point arithmetic; no special-purpose hardware is required. An initial FORTRAN version of this system can classify an ERTS computer-compatible tape into 24 classes in less than 15 minutes.

Eppler, W. G.↗
NASA NTRS1975

In-orbit servicing

A concept called the low-cost modular spacecraft, in which the subsystems would be contained in replaceable modules and which would be capable of various applications, is under engineering development. Studies have shown that servicing of such a spacecraft on orbit by the Space Shuttle over an extended lifetime is more economical than three other alternatives: launching replacement satellites on conventional boosters as existing satellites fail, launching replacements by Shuttle, or launching replacement satellites and retrieving malfunctioning satellites by Shuttle. For on-orbit servicing, the Shuttle would use its Remote Manipulator system (RMS) to bring the malfunctioning satellite into its cargo bay. The Flight Support System (FSS) on the Orbiter used for servicing the satellite would include an appendage storage frame, a retention cradle, a positioning platform, a Module Exchange Mechanism (MEM), and a storage magazine. Ground simulations are under way with the Orbiter mockup.

Cepollina, F. J.↗
NASA NTRS1974

Skylab EVA system development

EVA hardware design is traced from initial conceptual development to final flight configuration. Major concepts considered during design evolution are identified, and reasons for the acceptance or rejection of these concepts are discussed. An iterative approach to simulations and testing was found useful. Early conceptual efforts concentrated on analyses and normal gravity, low-cost, low-fidelity mockups; later design phases combined normal gravity and neutral buoyancy simulations of increasing fidelity. Restudying after each change consistently drove EVA hardware toward operational and mechanical simplicity.-

Heckman, R. T.↗
NASA NTRS1975

Data handling for the modular observatory

The current paper summarizes work undertaken at TRW for the EOS satellite and related missions, and it presents conclusions that lead to a flexible and low-cost overall system implementation. It shows how the usual communication and data handling functions must be altered to meet the modularization ground rules, and it demonstrates the modularization that is possible in the handling of wideband payload data both on board and on the ground.

Taber, J. E.↗
NASA NTRS1975

Charge-coupled device /CCD/ analog signal processing

Analog charge-coupled devices and sampled data filtering have developed into mature disciplines. Each discipline offers the other wide systems advantages where alone it would be impractical. This letter explores these advantages in a number of implementations against the scale of wide low-cost applications.

Benz, H. F.↗
NASA NTRS1975

Study of a water quality imager for coastal zone missions

The present work surveys water quality user requirements and then determines the general characteristics of an orbiting imager (the Applications Explorer, or AE) dedicated to the measurement of water quality, which could be used as a low-cost means of testing advanced imager concepts and assessing the ability of imager techniques to meet the goals of a comprehensive water quality monitoring program. The proposed imager has four spectral bands, a spatial resolution of 25 meters, and swath width of 36 km with a pointing capability of 330 km. Silicon photodetector arrays, pointing systems, and several optical features are included. A nominal orbit of 500 km altitude at an inclination of 50 deg is recommended.

Staylor, W. F.↗
NASA NTRS1975

Feasibility demonstration for hydrogen chloride detection using a chemisorption technique and a quartz crystal microbalance

A method of measuring concentrations of hydrogen chloride between 1 part per billion and 10 parts per million at standard temperature and pressure is presented. The feasibility of a low-cost device incorporating a chemisorption technique coupled with a quartz crystal microbalance was demonstrated in the field at the Viking B launch using a Titan-Centaur vehicle from Kennedy Space Center on August 20, 1975. Hydrogen chloride is a product of solid rocket combustion. The concentration level of hydrogen chloride for this particular launch was measured as approximately 0.2 parts per million at 4 km from the launch site.

Jex, D. W.↗
NASA NTRS1975

Mariner Jupiter/Saturn LCSSE thruster/valve assembly and injection propulsion unit rocket engine assemblies: 0.2-lbf T/VA development and margin limit test report

Thruster valve assemblies (T/VA's) were subjected to the development test program for the combined JPL Low-Cost Standardized Spacecraft Equipment (LCSSE) and Mariner Jupiter/Saturn '77 spacecraft (MJS) programs. The development test program was designed to achieve the following program goals: (1) demonstrate T/VA design compliance with JPL Specifications, (2) to conduct a complete performance Cf map of the T/VA over the full operating range of environment, (3) demonstrate T/VA life capability and characteristics of life margin for steady-state limit cycle and momentum wheel desaturation duty cycles, (4) verification of structural design capability, and (5) generate a computerized performance model capable of predicting T/VA operation over pressures ranging from 420 to 70 psia, propellant temperatures ranging from 140 F to 40 F, pulse widths of 0.008 to steady-state operation with unlimited duty cycle capability, and finally predict the transient performance associated with reactor heatup during any given duty cycle, start temperature, feed pressure, and propellant temperature conditions.

Clark, E. C.↗
NASA NTRS1975

Shuttle-launched multi-comet mission 1985

A low-cost multi-comet intercept mission with a launch in March 1985 is proposed. Two cometary spacecraft of identical design will be placed into a low earth parking orbit using a single Shuttle launch vehicle. Solid kick stages will then be used to boost each spacecraft into its required interplanetary trajectory. It is planned to have one spacecraft intercept comet Giacobini-Zinner in September 1985 and then go on to comet Borrelly with an encounter in December 1987. Earth swingby maneuvers will be used to achieve the double cometary intercept. The other spacecraft will be targeted for a pre-perihelion encounter with Halley's comet in December 1985.

Farquhar, R. W.↗
NASA NTRS1975

Evaluation philosophy for shuttle launched payloads

Some approaches to space-shuttle payload evaluation are examined. Issues considered include subsystem replacement in low-cost modular spacecraft (LCMS), validation of spacelab payloads, the use of standard components in shuttle-era spacecraft, effects of shuttle-induced environments on payloads, and crew safety. The LCMS is described, and goals are discussed for its evaluation program. Concepts regarding how the evaluation should proceed are considered.

Heuser, R. E.↗
NASA NTRS1975

Health Education Telecommunications Experiment

The Health/Education Telecommunications Experiment carried out with Applications Technology Satellite-6 is described. The experiment tested the effectiveness of color television broadcasts to over 120 low-cost receivers in rural areas. Five types of earth stations were involved: receive-only terminals (ROT), an intensive terminal consisting of the ROT plus a VHF transmitter and receiver; comprehensive S and C-band terminals having the capability of transmitting the video signal plus four audio channels; and the main originating stations. Additional supporting elements comprise 120 video receive terminals, 51 telephony transceivers, and 8 video originating terminals of 3 different parts. Technical parameters were measured to within 1 dB of the calculated values.

Whalen, A. A.↗
NASA NTRS1975

Advances in automatic extraction of information from multispectral scanner data

The state-of-the-art of automatic multispectral scanner data analysis and interpretation is reviewed. Sources of system variability which tend to obscure the spectral characteristics of the classes under consideration are discussed, and examples of the application of spatial and temporal discrimination bases are given. Automatic processing functions, techniques and methods, and equipment are described with particular attention to those that are applicable to large land surveys using satellite data. The development and characteristics of the Multivariate Interactive Digital Analysis System (MIDAS) for processing aircraft or satellite multispectral scanning data are discussed in detail. The MIDAS system combines the parallel digital implementation capabilities of a low-cost processor with a general purpose PDP-11/45 minicomputer to provide near-real-time data processing. The preprocessing functions are user-selectable. The input subsystem accepts data stored on high density digital tape, computer compatible tape, and analog tape.

Erickson, J. D.↗
NASA NTRS2020

An Ultra-long Life, High-performance, Flexible Li-CO2Battery Based on Multifunctional Carbon Electrocatalysts

Integrating CO2 utilization and renewable energy delivery/storage, the rechargeable Li–CO2 battery has been considered as a promising candidate for next-generation secondary batteries. However, high-performance catalyst(s) for efficient formation and decomposition of the discharge product, Li2CO3, are an imperative part of a Li–CO2 battery. The development of flexible Li–CO2 batteries extends their applications into compliant and wearable devices/systems, but at the same time imposes a big challenge for battery fabrication and lifetime enhancement. In this study, a rechargeable quasi-solidus flexible Li–CO2 battery was designed and fabricated using highly active N,S-doped carbon nanotubes (N,S-doped CNTs) as the cathode catalyst, and a smart polymer gel as the flexible electrolyte. This newly-developed flexible Li–CO2 battery exhibited a capacity as high as 23560 mAh g−1 based on the catalyst mass and an ultra-long lifetime of up to 538 cycles with excellent mechanical flexibility. This work provides a platform for the design and development of high-performance flexible Li–CO2 batteries from low-cost, earth-abundant, carbon-based multifunctional cathode catalysts.

Superior stability↗
NASA NTRS2026

NASA Weather Balloon Demonstration of an Additively Manufactured Antenna

Additive manufacturing (AM) enables low-cost, lightweight, and geometrically flexible antennas for rapid deployment missions. This work reports a left-hand circularly polarized magneto-electric dipole printed on a Radix dielectric with inkjet silver metallization and demonstrated as a process replacement for NASA weather-balloon RF hardware. By combining substrate fabrication and metallization, AM provides value for unrecoverable or field-replaceable systems. A physics based verification workflow links AM-specific material behavior to electromagnetic performance and yields bounded total, radiation, and mismatch efficiencies. Standard surface-impedance and roughness models failed to reproduce the frequency-dependent radiation loss observed in printed inks, underscoring the need for AM-specific conductor parameterization. Mission testing confirmed TDRSS link closure from NASA’s Columbia Scientific Balloon Facility and validated a repeatable print–measure–fly workflow for bounding RF performance and qualifying AM antennas for field use.

Peter Moschetti↗
NASA NTRSDate not supplied

Carbon Fiber Composite Processing Using Isothermal Resins

To meet future demand for single-aisle composite aircraft production, manufacturing rates are expected to increase by up to six times current production rates. Resin infusion is a manufacturing method that has potential to enable fabrication of structures at the desired rates. However, production cycle times with currently available commercial infusion resins cannot support the rates needed for an estimated 80 aircraft per month. Recently, rapid-curing isothermal resins were developed that can reduce the overall processing time. These resins can be infused, cured, and demolded at a single temperature below 100 °C, thereby eliminating the need for time consuming temperature ramps and shortening the overall cure time. In addition, the low temperatures enable use of low-cost tooling during production. This presentation will discuss the use of resin transfer molding to produce composites with rapid-curing isothermal resins, manufacturing considerations, and performance characteristics of the composites.

John M Gardner↗
NASA NTRSDate not supplied

Extending mARC II Arc-Jet Test Duration via Design and Implementation of Model System Cooling Sleeve

The mARC II is a 30 kW arc-jet facility at NASA Ames Research Center used to generate high-enthalpy flows for low-cost thermal protection system (TPS) technology development. Sustained operation of downstream instrumentation and material samples is constrained by thermal loading transmitted through the arc-jet test environment, limiting achievable run times and experimental throughput. This work presents the design, integration, and validation of a cooling sleeve implemented on the sweep arm drive motor feedthrough to mitigate thermal accumulation during testing. The addition of the cooling sleeve is a simple, robust upgrade that translates directly into enhanced facility capability by supporting longer run durations, reduced turnaround time, and higher throughput.

sting arm↗
NASA NTRSDate not supplied

Extending mARC II Arc-Jet Test Duration via Design and Implementation of Model System Cooling Sleeve

The mARC II is a 30 kW arc-jet facility at NASA Ames Research Center used to generate high-enthalpy flows for low-cost thermal protection system (TPS) technology development. Sustained operation of downstream instrumentation and material samples is constrained by thermal loading transmitted through the arc-jet test environment, limiting achievable run times and experimental throughput. This work presents the design, integration, and validation of a cooling sleeve implemented on the sweep arm drive motor feedthrough to mitigate thermal accumulation during testing. The addition of the cooling sleeve is a simple, robust upgrade that translates directly into enhanced facility capability by supporting longer run durations, reduced turnaround time, and higher throughput.

numerical simulations↗
NASA NTRSDate not supplied

NASA Weather Balloon Demonstration of an Additively Manufactured Antenna

Additive manufacturing (AM) enables low-cost, lightweight, and geometrically flexible antennas for rapid deployment missions. This work reports a left-hand circularly polarized magneto-electric dipole printed on a Radix dielectric with inkjet silver metallization and demonstrated as a process replacement for NASA weather-balloon RF hardware. By combining substrate fabrication and metallization, AM provides value for unrecoverable or field-replaceable systems. A physics based verification workflow links AM-specific material behavior to electromagnetic performance and yields bounded total, radiation, and mismatch efficiencies. Standard surface-impedance and roughness models failed to reproduce the frequency-dependent radiation loss observed in printed inks, underscoring the need for AM-specific conductor parameterization. Mission testing confirmed TDRSS link closure from NASA’s Columbia Scientific Balloon Facility and validated a repeatable print–measure–fly workflow for bounding RF performance and qualifying AM antennas for field use.

Peter Moschetti↗