Improved constraint on the M I N E R ν A medium energy neutrino flux using ν ¯ e − → ν ¯ e − data
Not Available
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
SEARCH · Search NASA
Results for “m:N”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Electrospinning of ultra-high molecular weight polymers into aligned nanofibers and their application in chemical separations
Ultra-high molecular weight (UHMW, >10 6 g mol −1 ) vinyl polymers are increasingly accessible through photoiniferter polymerization, yet their behavior in electrospinning has received comparatively little attention. Here, we explore the electrospinning of UHMW poly(methyl acrylate), poly(methyl methacrylate), poly(N,N-dimethylacrylamide), and poly(styrene-co-pentafluorostyrene) synthesized by photoiniferter polymerization, with number-average molecular weights (M n ) greater than 1000 kDa and dispersities below 1.4. UHMW polymers form stable Taylor cones and discrete fibers at solution concentrations as low as 0.5 wt% due to their large number of entanglements, a threshold unachievable with low molecular weight (M n = 20–54 kDa) polymers of the same chemistry. Using poly(methyl methacrylate) and poly(styrene-co-pentafluorostyrene) as model systems, we demonstrate that fiber diameter can be tuned from 350 nm to 20 μm through systematic variation of polymer concentration (0.01 to 4 wt%) and flow rate (0.5 to 10 mL h −1 ). Additionally, we find that collector rotation rate governs fiber alignment, with highly aligned mats obtained with drum rotation speeds of 1000 RPM. Reversing the polarity of the electric field during electrospinning reorients the surface chemistry of these fiber mats without altering their microscale morphology, shifting the water contact angle by 7° (89° to 96°) and providing a two-fold binding capacity enhancement in cationic dye uptake. These results show that the high entanglement densities of UHMW vinyl polymers shift the accessible electrospinning window to dilute solutions and that electric-field polarity is a useful lever to control the surface chemistry in the resulting fibers.
Marquez, Joshua D. [University of Florida, Gainesv↗
Complementarity between neutrinoless double beta decay and collider searches for heavy neutrinos in composite-fermion models
Composite-fermion models predict excited quarks and leptons with mass scales which can potentially be observed at high-energy colliders like the LHC; the most recent exclusion limits from the CMS and ATLAS Collaborations corner excited-fermion masses and the compositeness scale to the multi-TeV range. At the same time, hypothetical composite Majorana neutrinos would lead to observable effects in neutrinoless double beta decay ($0\nu \beta \beta$) experiments. In this work, we show that the current composite-neutrino exclusion limit $M_N>4.6$ TeV, as extracted from direct searches at the LHC, can indeed be further improved to $M_N>8.8$ TeV by including the bound on the nuclear transition $^{136}$Xe $\to ^{136}$Ba + $2e^-$. Looking ahead, the forthcoming HL-LHC will allow probing a larger portion of the parameter-space, nevertheless, it will still benefit from the complementary limit provided by $0 \nu \beta \beta$ future detectors to explore composite-neutrino masses up to $12.6$ TeV.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Supported Platinum Nanoparticles Catalyzed Carbon–Carbon Bond Cleavage of Polyolefins: Role of the Oxide Support Acidity
Supported platinum nanoparticle catalysts are known to convert polyolefins to high-quality liquid hydrocarbons using hydrogen under relatively mild conditions. To date, few studies using platinum grafted onto various metal oxide (M x O y ) supports have been undertaken to understand the role of the acidity of the oxide support in the carbon-carbon bond cleavage of polyethylene under consistent catalytic conditions. Specifically, two Pt/M x O y catalysts (M x O y = SrTiO 3 and SiO 2 -Al 2 O 3 ; Al = 3.0 wt %, target Pt loading 2 wt % Pt similar to 1.5 nm), under identical catalytic polyethylene hydrogenolysis conditions (T = 300 degree celsius, P(H 2 ) = 170 psi, t = 24 h; M w = similar to 3,800 g/mol, M n = similar to 1,100 g/mol, D = 3.45, N branch/100C = 1.0), yielded a narrow distribution of hydrocarbons with molecular weights in the range of lubricants (M w = < 600 g/mol; M n < 400 g/mol; D = 1.5). While Pt/SrTiO 3 formed saturated hydrocarbons with negligible branching, Pt/SiO 2 -Al 2 O 3 formed partially unsaturated hydrocarbons (<1 mol % alkenes and similar to 4 mol % alkyl aromatics) with increased branch density (N branch/100C = 5.5). Further investigations suggest evidence for a competitive hydrocracking mechanism occurring alongside hydrogenolysis, stemming from the increased acidity of Pt/SiO 2 -Al 2 O 3 compared to Pt/SrTiO 3 . Additionally, the products of these polymer deconstruction reactions were found to be independent of the polyethylene feedstock, allowing the potential to upcycle polyethylenes with various properties into a value-added product.
36 MATERIALS SCIENCE↗
Right-handed Dirac and Majorana neutrinos at Belle II
We assess the ability of the Belle II experiment to probe the Dirac or Majorana nature of a massive right-handed neutrino (RHN) N in the MeV to GeV mass range. We consider the production and decay of RHNs to proceed via new interactions described by the standard model effective field theory (SMEFT) extended with right-handed neutrino fields (SMNEFT), and not via mass mixing with active neutrinos. We find that Belle II has the potential to discover N if kinematically accessible. We perform detailed simulations of the angular distributions of lepton pairs from the decay of N produced in two-body and three-body decays of B mesons. We show that for m N above 100 MeV, Belle II can distinguish between Dirac and Majorana neutrinos at more than the 5σ CL for most operators, and the combination of the production and decay operators can be identified from the subsequent decay of the heavy neutrino. Also, the production operators can be identified using three-body B meson decay for any m N if the B → DℓN and B → D * ℓN events can be well separated.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
2,4,6-Triphenylpyridinium-Substituted Neutral Nickel Catalysts: Ethylene Polymerization, Influence of Activator, Catalyst Decomposition, and End-Group Analysis
The reactivity of 2,4,6-triphenylpyridinium-substituted nickel(II)-salicyliminato catalysts in ethylene polymerization has been explored. Here, the known complex 6a equipped with a 2,6-diisopropylphenyl group affords polyethylene with M n = 10-12 kDa at 19 ⁰C, while 8a possessing the bulkier 2,6-diphenylphenyl moiety gives polymer with M n = 270-310 kDa. The stability of catalyst 6a depends on the borane activator. If B(C 6 F 5 ) 3 is employed, enhanced stability is observed compared with using 3H 2 O·B(C 6 F 5 ) 3 activator. Catalyst 6a decomposes forming a hydroxyl-bridged dimer 14 which may be reac-tivated, albeit inefficiently, by excess borane activator. Polymer formed by 6a contains ca. 3-6% of 2-trifluoromethylphenyl, pentafluorophenyl, and 3,5-bis(trifluoromethyl)phenyl end groups combined. The pentafluoro-phenyl end group originates from reaction of 6a with borane activator, and from reactivation of hydroxyl-bridged dimer 14. 3,5-Bis(trifluoromethyl)phenyl end groups are likely formed in a reaction sequence initiated by protonation of one aryl group in NaBArF which creates B[C 6 H 3 (CF 3 ) 2 ] 3 . The triarylborane can then react with 6a or 14 transferring the 3,5-bis(trifluoromethyl)phenyl group to nickel.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Multi-instanton calculus in $c$ = 1 string theory
We formulate a strategy for computing the complete set of non-perturbative corrections to closed string scattering in c = 1 string theory from the worldsheet per spective. This requires taking into account the effect of multiple ZZ-instantons, including higher instantons constructed from ZZ boundary conditions of type (m, 1), with a careful treatment of the measure and contour in the integration over the instanton moduli space. The only a priori ambiguity in our prescription is a normalization constant $\mathcal{N}_m$ that ap pears in the integration measure for the (m, 1)-type ZZ instanton, at each positive integer m. We investigate leading corrections to the closed string reflection amplitude at the n instanton level, i.e. of order e -n/g s , and find striking agreement with our recent proposal on the non-perturbative completion of the dual matrix quantum mechanics, which in turn fixes $\mathcal{N}_m$ for all m.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
A Chlorinated Donor Polymer Achieving High‐Performance Organic Solar Cells with a Wide Range of Polymer Molecular Weight
Abstract In the field of non‐fullerene organic solar cells (OSCs), compared to the rapid development of non‐fullerene acceptors, the progress of high‐performance donor polymers is relatively slow. The property and performance of donor polymers in OSCs are often sensitive to the molecular weight of the polymers. In this study, a chlorinated donor polymer named D18‐Cl is reported, which can achieve high performance with a wide range of polymer molecular weight. The devices based on D18‐Cl show a higher open‐circuit voltage ( V OC ) due to the slightly deeper energy levels and an outstanding short‐circuit current density ( J SC ) owing to the appropriate long periods of blend films and less ([6,6]‐phenyl‐C71‐butyric acid methyl ester) (PC 71 BM) in mixed domains, leading to the higher efficiency of 17.97% than those of the D18‐based devices (17.21%). Meanwhile, D18‐Cl can achieve high efficiencies (17.30–17.97%) when its number‐averaged molecular weight ( M n ) is ranged from 45 to 72 kDa. In contrast, the D18‐based devices only exhibit relatively high efficiencies in a narrow M n range of ≈70 kDa. Such property and performance make D18‐Cl a promising donor polymer for scale‐up and low‐cost production.
Zeng, Anping↗
High-dimensional isotomics, part 2: Observations of over 100 constraints on methionine's isotome
The abundances of different isotopic forms of a compound, or isotopologues, will vary based on its physical and chemical history. The number of isotopologues increases combinatorically with the size of a molecule, and even small molecules such as amino acids have thousands of potentially observable isotopic variants. However, due to the analytical challenges of separating and observing isotopologues, only a few dimensions of isotopic diversity are routinely measured. Overcoming these challenges requires both an experimental method to observe many isotopic properties and a theoretical framework for interpreting these experiments. In Part 1, we presented such a theoretical framework; here, we demonstrate an experimental method, which we apply to methionine. Our approach uses a Q Exactive HF Orbitrap to perform several “M + N experiments”, where a sample is ionized, a subset of its isotopologues with cardinal mass N daltons greater than the unsubstituted isotopologue is selected and fragmented, and the proportions of all detectable isotopic forms of those fragment ions are quantified. We perform M + 1, M + 2, M + 3, and M + 4 experiments of a methionine sample and standard where the sample has a 100 ‰ enrichment of 13C at the methyl carbon relative to the natural 13C abundance at that position in the standard, and is otherwise identical to the standard. We observe isotopic forms of 8 fragment ion species for each version of the M + N experiment. With the assistance of a forward model of expected mass spectra, we identify isotopic peaks for each fragment ion based on observed mass and abundance, screen these for data quality, and quantify abundances for 146 unique isotopic peaks at precisions of ≈ 0.3–3 ‰. We present our direct observations and use them to reconstruct the concentrations of 19 individual singly, doubly, and triply-substituted isotopologues; doing so gives fewer constraints and broader error bars than working with the direct observations, but may be more interpretable for some applications. We also examine possibilities for measuring additional peaks, which are primarily limited by the detection limit of the Orbitrap-IRMS method. We then suggest some possible uses of our direct measurements for chemical forensics and hypothesis testing. Furthermore, our results demonstrate the diversity of isotopic constraints currently observable and interpretable for organic molecules.
58 GEOSCIENCES↗
Propane Dehydrogenation Catalyzed by Supported Group IV (Ti, Zr, Hf) Organometallics on Silicon Nitride
Mesoporous silicon nitride (Si 3 N 4 ) enables access to chemisorbed group IV organometallics catalysts active for propane dehydrogenation (PDH) compared to the organometallic analogues on mesoporous silica under the same reaction conditions. The series of Si 3 N 4 -supported materials are active catalysts, (Zr > Hf > Ti k f = 290, 232, and 162 mol mol Metal -1 h -1 at 450 °C with 2% C 3 H 8 in Ar, respectively) with selectivity above 95%, demonstrating additional examples of Ti and Hf systems for PDH. However, the underlying mechanism of the improved performance relative to oxide supported homologues is not well-understood. Characterization of thermally treated samples (DRIFTS, XAS and SSNMR) and computational modeling of this catalyst series was utilized to differentiate between potential amido - (C-H activation along the M-N bond) and imido - (C-H activation along the M=N bond) mechanisms. Due to remaining mechanistic ambiguity, a Ga analogue was synthesized and evaluated for PDH activity as an indirect probe to experimentally differentiate pathways. An inversion of the oxide/nitride performance trend is observed for the Ga congener which does not form a Ga=N bond, most consistent with different mechanisms dictating the performance of the group IV/Si 3 N 4 catalysts vs Ga/Si 3 N 4 .
heterolytic cleavage↗
High photon-phonon pair generation rate in a two-dimensional optomechanical crystal
Integrated optomechanical systems are a leading platform for manipulating, sensing, and distributing quantum information, but are limited by residual optical heating. Here, we demonstrate a two-dimensional optomechanical crystal (OMC) geometry with increased thermal anchoring and a mechanical mode at 7.4 GHz, well aligned with the operation range of cryogenic microwave hardware and piezoelectric transducers. The eight times better thermalization than current one-dimensional OMCs, large optomechanical coupling rates, g 0 /2π ≈ 880 kHz, and high optical quality factors, Q opt = 2.4 × 10 5 , allow ground-state cooling (n m = 0.32) of the acoustic mode from 3 K and entering the optomechanical strong-coupling regime. In pulsed sideband asymmetry measurements, we show ground-state operation (n m < 0.45) at temperatures below 10 mK, with repetition rates up to 3 MHz, generating photon-phonon pairs at ≈ 147 kHz. Our results extend optomechanical system capabilities and establish a robust foundation for future microwave-to-optical transducers with entanglement rates exceeding state-of-the-art superconducting qubit decoherence rates.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Cationic Tantalum Hydrides Catalyze Hydrogenolysis and Alkane Metathesis Reactions of Paraffins and Polyethylene
Sulfated aluminum oxide (SAO), a high surface area material containing sulfate anions that behave like weakly coordinating anions, reacts with Ta(=CH t Bu)(CH 2 t Bu) 3 to form [Ta(CH 2 t Bu) 2 (O–) 2 ][SAO] (1). Subsequent treatment with H 2 forms Ta–H + sites supported on SAO that are active in hydrogenolysis and alkane metathesis reactions. In both reactions Ta–H + is more active than related neutral Ta–H sites supported on silica. This reaction chemistry extends to melts of high-density polyethylene (HDPE), where Ta–H + converts 30% of a low molecular weight HDPE (M n = 2.5 kg mol –1 ; D = 3.6) to low molecular weight paraffins under hydrogenolysis conditions. Under alkane metathesis conditions Ta–H + converts this HDPE to a high MW fraction (M n = 6.2 kDa; D = 2.3) and low molecular weight alkane products (C 13 –C 32 ). Furthermore, these results show that incorporating charge as a design element in supported d 0 metal hydrides is a viable strategy to increase the reaction rate in challenging reactions involving reorganization of C–C bonds in alkanes.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Impact of error fields and error field correction on heat fluxes in SPARC
Using a single toroidal array of coils to reduce the m,n = 2,1 resonant error field (EF) produced by the misalignment of the axisymmetric coils in SPARC can result in the enhancement of the local divertor heat fluxes. Managing high divertor heat fluxes (q ∥ $\simeq$ 10 GW m -2 ) poses a challenge for compact tokamak devices such as SPARC. The presence of non-axisymmetric magnetic field perturbations adds complexity to the problem by generating intricate 3D edge magnetic topologies that alter the heat flux distributions on the target plates. The aim of this work is to investigate the impact of the EF correction (EFC) on the heat fluxes at the divertor plates in SPARC. The MHD code M3DC1 has been used to simulate the 3D magnetic perturbations generated by the shift and tilt of several axisymmetric coils within specified tolerances, as well as from the array of EFC coils located at the midplane. Using a heuristic model that extends the concept of an axisymmetric heat flux layer to 3D plasmas, the resultant heat flux distributions is derived from magnetic footprints calculated with the MAFOT code. The results show that the EFC could either decrease or further enhance the local heat flux when used to correct the m,n = 2,1 resonant EF to enhance the core plasma performance.
3D fields↗
The root cause of disruptive NTMs and paths to stable operation in DIII-D ITER baseline scenario plasmas
Analyses of the DIII-D ITER Baseline Scenario database support that the disruptive m,n=2,1 magnetic islands are pressure gradient driven, non-linear instabilities seeded in a sequence of stochastic transient magnetic perturbations, and that the current profile relaxation does not affect the m,n=2,1 island onset rate. At low torque, these Neoclassical Tearing Modes are most commonly seeded by non-linear 3-wave coupling when the differential rotation between the q=1 & q=2 rational surfaces approaches zero. Lack of statistically significant difference between the current profiles of stable and unstable states, as well as lack of correlation between the tearing mode onset rate and the current profile relaxation both reject causality between the current profile evolution and the 2,1 magnetic island onsets in these plasmas. These support that preserving the differential rotation between the q=1 and q=2 rational surfaces is key to long pulse stable operation in the plasma scenario planned for ITER, while optimization of the current profile within the explored parameter space may lead to much weaker improvements than sustaining the differential rotation.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Role of Surface Termination in the Structural and Electronic Properties of Sc$_2$CT$_\textrm{x}$ MXene
Graphene-like layered transition metal carbides, nitrides, or carbonitrides, called MXenes, obey the stoichiometric formula of M n+1 X n T x , where M is an early transition metal such as scandium (Sc), n is a natural number, X is C, N, or CN, and T x is a functional group such as –O, –F, or –OH that passivates the surface of the MXene. The electronic structure of bare Sc 2 C and functionalized Sc 2 CT x MXenes are explored by performing first-principles density functional theory (DFT) calculations. The bare Sc 2 C is metallic, but less stable than its passivated structure. The Sc 2 C MXene has an interlayer 2D electron gas not bound to Sc or C atoms but free to move, making it an electride. DFT calculations show that functionalization can open an energy gap in Sc 2 CT x MXenes. The size and type (direct versus indirect) of the bandgap vary with the functional groups, which provides a means for opening and tuning of the band gap.
DFT↗
Enhancing the activity of Pd ensembles on graphene by manipulating coordination environment
Atomic dispersion of metal catalysts on a substrate accounts for the increased atomic efficiency of single-atom catalysts (SACs) in various catalytic schemes compared to the nanoparticle counterparts. However, lacking neighboring metal sites has been shown to deteriorate the catalytic performance of SACs in a few industrially important reactions, such as dehalogenation, CO oxidation, and hydrogenation. Metal ensemble catalysts (M n ), an extended concept to SACs, have emerged as a promising alternative to overcome such limitation. Inspired by the fact that the performance of fully isolated SACs can be enhanced by tailoring their coordination environment (CE), we here evaluate whether the CE of M n can also be manipulated in order to enhance their catalytic activity. We synthesized a set of Pd ensembles (Pd n ) on doped graphene supports (Pd n /X-graphene where X = O, S, B, and N). We found that introducing S and N onto oxidized graphene modifies the first shell of Pd n converting Pd–O to Pd–S and Pd–N, respectively. Also, we further found that the B dopant significantly affected the electronic structure of Pd n by serving as an electron donor in the second shell. We examined the performance of Pd n /X-graphene toward selective reductive catalysis, such as bromate reduction, brominated organic hydrogenation, and aqueous-phase CO 2 reduction. We observed that Pd n /N-graphene exhibited superior performance by lowering the activation energy of the rate-limiting step, i.e., H 2 dissociation into atomic hydrogen. The results collectively suggest controlling the CE of SACs in an ensemble configuration is a viable strategy to optimize and enhance their catalytic performance.
36 MATERIALS SCIENCE↗
Investigation of the structure, filler interaction and degradation of disulfide elastomers made by Reversible Radical Recombination Polymerization (R3P)
In this paper we report the synthesis and analysis of cyclic polydisulfides, their redox depolymerization as well as their interaction with carbon black. Cyclic poly(3,6-dioxa-1,8-octanedithiol)s (pDODT) were synthesized by Reversible Radical Recombination Polymerization (R3P). R3P is a scalable “green” polymerization process using triethylamine (TEA), H 2 O 2 and air for the polymerization of dithiol monomers. pDODTs were synthesized in 5 and 20 g batches. The effect of peroxide concentration (3, 5, 10, 20, 30%) was investigated. It was found that the molecular weights increased exponentially with increasing peroxide concentrations. At 30% peroxide concentration pDODTs with M n up to 400,000 g/mol and polydispersity of 2 were obtained. 700 and 800 MHz NMR were used for investigating the chemical structure of the polymers. The absence of thiol end group signals in polymers made with > 10wt % H 2 O 2 and M n < 100,000 g/mol, including a sample of a fractionated polymer with starting Mn = 600,000 g/mol, verified cyclic structures. Dithiothreitol reduced the polymers to monomer and a small percentage of oligomers. Carbon black was shown to increase the moduli of high molecular weight pDODTs. Swelling tests in chloroform showed that polymers made with 20 and 30w% peroxide swelled 14 and 10 times of their starting weight without dissolving, indicating chemical interaction between the polymers and carbon black. In conclusion, further analysis of these interesting elastomers, available at the 20 g scale, is in progress.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Effect of Hydrophilicity-Imparting Substituents on Exciton Delocalization in Squaraine Dye Aggregates Covalently Templated to DNA Holliday Junctions
Molecular aggregates exhibit emergent properties, including the collective sharing of electronic excitation energy known as exciton delocalization, that can be leveraged in applications such as quantum computing, optical information processing, and light harvesting. In a previous study, we found unexpectedly large excitonic interactions (quantified by the excitonic hopping parameter J m,n ) in DNA-templated aggregates of squaraine (SQ) dyes with hydrophilic-imparting sulfo and butylsulfo substituents. Here, we characterize DNA Holliday junction (DNA-HJ) templated aggregates of an expanded set of SQs and evaluate their optical properties in the context of structural heterogeneity. Specifically, we characterized the orientation of and J m,n between dyes in dimer aggregates of non-chlorinated and chlorinated SQs. Here, three new chlorinated SQs that feature a varying number of butylsulfo substituents were synthesized and attached to a DNA-HJ via a covalent linker to form adjacent and transverse dimers. Various characteristics of the dye, including its hydrophilicity (in terms of log P o/w ) and surface area, and of the substituents, including their local bulkiness and electron withdrawing capacity, were quantified computationally.
59 BASIC BIOLOGICAL SCIENCES↗