Search NASA⌕ Search

SEARCH · Search NASA

Results for “medium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Cosmic-Ray Feedback on Bistable Interstellar Medium Turbulence

Abstract While cosmic rays ( E ≳ 1 GeV) are well coupled to a galaxy’s interstellar medium (ISM) at scales of L > 100 pc, adjusting stratification and driving outflows, their impact on small scales is less clear. Based on calculations of the cosmic-ray diffusion coefficient from observations of the grammage in the Milky Way, cosmic rays have little time to dynamically impact the ISM on those small scales. Using numerical simulations, we explore how more complex cosmic-ray transport could allow cosmic rays to couple to the ISM on small scales. We create a two-zone model of cosmic-ray transport, with the cosmic-ray diffusion coefficient set at the estimated Milky Way value in cold gas but smaller in warm gas. We compare this model to simulations with a constant diffusion coefficient. Quicker diffusion through cold gas allows more cold gas to form compared to a simulation with a constant, small diffusion coefficient. However, slower diffusion in warm gas allows cosmic rays to take energy from the turbulent cascade anisotropically. This cosmic-ray energization comes at the expense of turbulent energy which would otherwise be lost during radiative cooling. Finally, we show our two-zone model is capable of matching observational estimates of the grammage for some transport paths through the simulation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Multiwavelength Afterglow Analysis of GRB 221009A: Unveiling the Evolution of a Cooling Break in a Wind-like Medium

Gamma-ray bursts (GRBs) are the most energetic explosions in the Universe, and their afterglow emission provides an opportunity to probe the physics of relativistic shock waves in an extreme environment. Several key pieces for completing the picture of GRB afterglow physics are still missing, including jet properties, the emission mechanism, and particle acceleration. Here, we present a study of the afterglow emission of GRB 221009A, the most energetic GRB ever observed. Using optical, X-ray, and gamma-ray data up to approximately 2 days after the trigger, we trace the evolution of the multiwavelength spectrum and the physical parameters behind the emission process. The broadband spectrum is consistent with the synchrotron emission emitted by relativistic electrons with its index of p = 2.29 ± 0.02. We identify a break energy at keV and an exponential cutoff at GeV in the observed multiwavelength spectrum. The break energy increases in time from $16.0^{+7.1}_{-4.9}$ keV at 0.65 days to $46.8^{+25.0}_{-15.5}$ keV at 1.68 days, favoring a stellar-wind-like profile of the circumburst medium with k = 2.4 ± 0.1 as in ρ(r) ∝ r -k . The high-energy attenuation at around 0.4 to 4 GeV is attributed to the maximum of the particle acceleration in the relativistic shock wave. This study confirms that the synchrotron process can explain the multiwavelength afterglow emission and its evolution.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Neutron-capture Element Abundances of 491 Stars in Milky Way Dwarf Satellite Galaxies from Medium-resolution Spectra

The chemical compositions of evolved stars in Local Group dwarf spheroidal galaxies (dSphs) provide insight into the galaxy’s past star formation and nucleosynthesis. Neutron-capture element abundances are especially interesting. In particular, s-process elements can provide a third chemical clock for resolving star formation histories in addition to core-collapse and Type Ia supernovae. Likewise, the primary sites of the r-process are still areas of extensive research. Until now, the number of stars with neutron-capture element abundances in dSphs has been limited by the need for stars bright enough for high-resolution spectroscopy. We present abundance measurements of the neutron-capture elements Sr, Y, Ba, and Eu with errors <0.4 dex—as well as new measurements of Mg—in 491 stars in Sculptor, Fornax, Draco, Sextans, and Ursa Minor. The large number of stars in our sample is possible because we used medium-resolution spectra from the DEIMOS spectrograph, assembling the largest homogeneous set of neutron-capture abundances in dSphs to date. By utilizing the abundances of both s- and r-process elements, we find evidence of an s-process contribution at early times in Sculptor from our measurements of [Ba/Fe]. This is a potential signature of s-process nucleosynthesis in fast-rotating massive stars. By comparing our measurements of [Eu/Fe] with [Mg/Fe], we show the need for an r-process source that has a short delay time to enrich stars in the dSphs. Thus, neutron star mergers are likely not the sole source of r-process material in dSphs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Cosmic Ray Mediated Thermal Fronts in the Warm-Hot Circumgalactic Medium

We investigate the 1D plane-parallel front connecting the warm ($10^4$ K) and hot ($10^6$ K) phases of the circumgalactic medium (CGM), focusing on the influence of cosmic rays (CRs) in shaping these transition layers. We find that cosmic rays dictate the thermal balance while other fluxes (thermal conduction, radiative cooling, and gas flow) adjust to compensate. We compute column density ratios for selected transition temperature ions and compare them with observational data. While most of our models fail to reproduce the observations, a few are successful, although we make no claims for their uniqueness. Some of the discrepancies may indicate challenges in capturing the profiles in cooler, photoionized regions, as has been suggested for by previous efforts to model thermal transition layers.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

A New Framework for Interstellar Medium Emission Line Models: Connecting Multiscale Simulations across Cosmological Volumes

The James Webb Space Telescope (JWST) and Atacama Large Millimeter/submillimeter Array have detected emission lines from the ionized interstellar medium (ISM) in some of the first galaxies at z ≳ 6. These measurements present an opportunity to better understand galaxy assembly histories and may allow important tests of state-of-the-art galaxy formation simulations. It is challenging, however, to model these lines in their proper cosmological context. In order to meet this challenge, we introduce a novel subgrid line emission modeling framework. The framework uses the high-z zoom-in simulation suite from the Feedback in Realistic Environments (FIRE) collaboration. The line emission signals from H II regions within each simulated FIRE galaxy are modeled using the semianalytic HIIL INES code. A machine learning approach is then used to determine the conditional probability distribution for the line luminosity to stellar-mass ratio from the H II regions around each simulated stellar particle. This conditional probability distribution can then be applied to predict the line luminosities around stellar particles in lower-resolution, yet larger volume cosmological simulations. As an example, we apply this approach to the IllustrisTNG simulations at z = 6. The resulting predictions for the [O II ], [O III ], and Balmer line luminosities as a function of star formation rate agree well with current observations. Our predictions differ, however, from related works in the literature, which lack detailed subgrid ISM models. This highlights the importance of our multiscale simulation modeling framework. Finally, we provide forecasts for future line luminosity function measurements from the JWST and quantify the cosmic variance in such surveys.

(ISM:) H II regions↗
DOE OSTI2025

Medium-Chain Chlorinated Paraffins Measurements, SGP GIF, May 2023

This dataset contains measurements of medium-chain chlorinated paraffins (MCCPs) at 5-minute time resolution. The 6 most abundant ones are reported as well as the sum of all MCCPs measured. MCCPs were measured using a nitrate chemical ionization mass spectrometer at the ARM Southern Great Plains Guest Instrumentation Facility. Reported concentrations represent lower limit concentrations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Bioengineered algal lipids enriched in structured medium- and long-chain triacylglycerols, linoleate, and sn -2 palmitate for human milk fat substitutes

Human milk fat (HMF) contains triacylglycerol (TAG) as its primary component, providing over 50% of the calories for infant nutrition, along with structural and bioactive lipids that are important for immune and nervous system development. Palmitic acid, comprising 20-25% of the fatty acid complement of HMF, is predominantly esterified to the sn -2 position on the glycerol backbone. This regiospecific positioning facilitates absorption as 2-palmitoyl-monoacylglycerol after hydrolysis of the fatty acids at sn -1 and sn -2 by gut lipases. Other features of HMF include enrichment in structured medium- and long-chain triglycerides (MLCTs), and variation in the ratio of oleic acid to linoleic acid with maternal diet and geography. We have engineered Auxenochlorella, an oleaginous green alga, for biosynthesis of an MLCT- and sn -2 palmitate-enriched HMF substitute for infant formula, matching the regioisomeric composition and proportions of the most abundant fatty acids in HMF.

Lin, Jon Y-T [University of California, Berkeley;]↗
DOE OSTI2025

Medium Voltage Testbed for Comparing Advanced Power Line Sensors vs. Transformers with Electrical Grid Events

Electrical utilities have relied upon potential transformers (PTs) and current transformers (CTs) for very accurate metering and to provide reliable signals for protective relays. These devices measure phase voltages and currents and are commissioned by electrical engineers. PTs/CTs can detect and react to various electrical anomalies that could adversely affect electrical grid operations. Less expensive alternative sensing technologies offer the possibility of wider deployment, particularly in grids that employ distributed energy resources. In this work, the performance of an advanced medium-voltage sensor is compared with that of a reference PT and a CT and experimentally evaluated for different power grid scenarios on an advanced outdoor power line sensor testbed at the U.S. Department of Energy’s Oak Ridge National Laboratory. The sensor is based on a capacitive divider for voltage monitoring and a Rogowski coil with an integrator for current monitoring. This study simulated a power grid model based on a utility circuit at the Riverside EPB of Chattanooga. The simulation circuit was created with MATLAB/Simulink software and was integrated into an RT-LAB project to run with the OP4510 real-time simulator at the OPLST. During the tests, the real-time simulations were run for 40 s, and the signal to record the test event with the power meter was set at 30 s for the event-trigger circuit. The advanced outdoor power line sensor testbed has a real-time simulator that is used to generate transient scenarios (e.g., electrical faults, capacitor bank operation, and service restoration), while the analog signals are recorded by the same high-resolution power meter. The behaviors of analog signals, harmonic components, total harmonic distortion, and crest factors are assessed for this power line sensor and compared with those of the reference PT/CT because of the absence of testing standards for advanced outdoor power line sensors. The results showed that this OPLS technology responded identically to the PT and CT under all conditions.

Piesciorovsky, Emilio [ORNL]↗
DOE OSTI2024

Human Machine Interface and Controls Development for a Medium Voltage Solid State Transformer

The demand for a more capable electric power grid has increased due to greater energy generation and consumption. • Controlling energy flow bidirectionally with new technologies such as solid state transformers can meet this demand, improving power quality, efficiency, and grid security. • A human machine interface was created to control a medium voltage solid state transformer.

Rafferty, Ezekiel↗
DOE OSTI2024

Practical challenges of model predictive control (MPC) for grid interactive small and medium commercial buildings

To the urgent call for mitigating climate change, substantial initiatives have been undertaken to deploy grid-interactive heating, ventilation, and air-conditioning (HVAC) controls, such as model predictive control (MPC) for buildings. These efforts typically aim to curtail peak energy demand, shift load and enhance overall energy efficiency. With the recent development of low-cost MPC technologies that don’t require extensive instrumentation or manual modeling, small and medium commercial buildings (SMCBs), which rarely utilize advanced HVAC control systems, have become candidates for grid-interactive efficient buildings (GEBs). However, despite the potential benefits and maturity of the technology itself, several practical challenges remain in real-world implementation. In this paper, we share the practical challenges that we have encountered in implementing and testing three types of MPC solutions (ON/OFF unit, dualfuel, and VRF systems) on multiple SMCB sites. We describe the MPC deployment process and discuss the lessons learned. The site selection, eligibility, and retrofit availability (e.g., utility price structure, thermostat communications, etc.) are the main discussion points at the beginning of the project. Also, the modeling automation and the best practices for interacting with endusers and handling erroneous situations are presented for successful operations.

woo Ham, Sang↗
DOE OSTI2025

The Multi-Phase Circumgalactic Medium of DESI Emission-Line Galaxies at z~1.5

We study the multi-phase circumgalactic medium (CGM) of emission line galaxies (ELGs) at $z\sim1.5$, traced by MgII$\lambda2796$, $\lambda2803$ and CIV$\lambda1548$, $\lambda1550$ absorption lines, using approximately 7,000 ELG-quasar pairs from the Dark Energy Spectroscopic Instrument. Our results show that both the mean rest equivalent width ($W_{0}$) profiles and covering fractions of MgII and CIV increase with ELG stellar mass at similar impact parameters, but show similar distributions when normalized by the virial radius. Moreover, warm CIV gas has a more extended distribution than cool MgII gas. The dispersion of MgII and CIV gas velocity offsets relative to the galaxy redshifts rises from $\sim100 \, \rm km \, s^{-1}$ within halos to $\sim 200 \, \rm km \, s^{-1}$ beyond. We explore the relationships between MgII and CIV $W_{0}$ and show that the two are not tightly coupled: at a fixed absorption strength of one species, the other varies by several-fold, indicating distinct kinematics between the gas phases traced by each. We measure the line ratios, FeII/MgII and CIV/MgII, of strong MgII absorbers and find that at $<0.2$ virial radius, the FeII/MgII ratio is elevated, while the CIV/MgII ratio is suppressed compared with the measurements on larger scales, both with $\sim4-5\, σ$ significance. We argue that multiphase gas that is not co-spatial is required to explain the observational results. Finally, by combining with measurements from the literature, we investigate the redshift evolution of CGM properties and estimate the neutral hydrogen, metal, and dust masses in the CGM of DESI ELGs -- found to be comparable to those in the ISM.

Lan, Ting-Wen [Taiwan, Natl. Taiwan U.; Academia S↗
DOE OSTI2025

Tracing the Cosmic Evolution of the Cool Circumgalactic Medium of Luminous Red Galaxies with DESI Year 1 Data

We investigate the properties of the cool circumgalactic medium (CGM) of massive galaxies and their cosmic evolution. By using the year 1 dataset of luminous red galaxies (LRGs) and QSOs from the Dark Energy Spectroscopic Instrument survey, we construct a sample of approximately 600,000 galaxy-quasar pairs and measure the radial distribution and kinematics of the cool gas traced by Mg II absorption lines as a function of galaxy properties from redshift 0.4 to redshift 1.2. Our results show that the covering fraction of the cool gas around LRGs increases with redshift, following a trend similar to the global evolution of galaxy star formation rate. At small radii (< 0.3rvir), the covering fraction anti-correlates with stellar mass, suggesting that mass-dependent processes suppress the cool gas content in the inner region. In addition, we measure the gas dispersion by modeling the velocity distribution of absorbers with a narrow and a broad components -- sigma_n ~ 160 and sigma_b ~ 380 km/s -- and quantify their relative contributions. The results show that the broad component becomes more prominent in the outer region, and its relative importance in the central region grows with increasing stellar mass. Finally, we discuss possible origins of the cool gas around massive galaxies, including the contribution of satellite galaxies and the precipitation scenario.

Chang, Yu-Ling [Taiwan, Natl. Taiwan U.] (ORCID:00↗
DOE OSTI2025

Neutrino-Nucleus Scattering Cross Sections at Medium Energies

The weak interactions of neutrinos with other Standard Model particles are well described within the Standard Model of particle physics. However, modern accelerator-based neutrino experiments employ nuclei as targets, where neutrinos interact with bound nucleons, turning a seemingly simple electroweak process into a complex many-body problem in nuclear physics. At the time of writing this Encyclopedia of Particle Physics chapter, neutrino-nucleus interactions remain one of the leading sources of systematic uncertainty in accelerator-based neutrino oscillation measurements. This chapter provides a pedagogical overview of neutrino interactions with nuclei in the medium-energy regime, spanning a few hundred MeV to several GeV. It introduces the fundamental electroweak formalism, outlines the dominant interaction mechanisms - including quasielastic scattering, resonance production, and deep inelastic scattering - and discusses how nuclear effects such as Fermi motion, nucleon-nucleon correlations, meson-exchange currents, and final-state interactions modify observable cross sections. The chapter also presents a brief survey of the foundational and most widely used theoretical models for neutrino-nucleus cross sections, together with an overview of current and upcoming accelerator-based neutrino oscillation experiments that are shaping the field. Rather than targeting experts, this chapter serves as a primer for advanced undergraduates, graduate students, and early-career researchers entering the field. It provides a concise foundation for understanding neutrino-nucleus scattering, its relevance to oscillation experiments, and its broader connections to both particle and nuclear physics.

Pandey, Vishvas [Fermilab] (ORCID:0000000230827987↗
DOE OSTI2026

Natural Language Processing to Inform Agent-Based Modeling: With Application to Modeling Adoption of Medium-Duty Electric Vehicles

Agent-based socio-technical modeling of medium- and heavy-duty (MDHD) electric vehicle (EV) adoption has the potential to provide analysis, prediction, and gui. This paper describes new applications of text analysis developed through machine learning (ML) to build and understand relevant topics and their saliency in the published discourse on adoption of MDHD EVs. This work contributes to the state of the art in topic mining models by defining a new metric of topic ranking (START) that quantifies the importance of predefined topics within the corpus using weighted results for predefined topics from two topic modeling approaches: Latent Dirichlet Allocation (LDA) and BERTopic. The START metric is then demonstrated in practice to model how academia and industry view the EV adoption process based on the respective texts published by these groups. Results show that academic literature places more emphasis on categories of interests such as norms/attitudes and adopter knowledge, while trade journals tend to emphasize long-term cost more than academia. The two bodies of literature agree on the importance of policy and incentives in MDHD EV adoption. Together these results illustrate the potential to use ML-based text analysis to populate the characteristics of agent-based socio-technical models.

Electric vehicle adoption, fleet electrification, ↗
DOE OSTI2026

Optimized Gear Selection to Maximize Energy Savings in Electric Traction Drives for Medium and Heavy Duty Vehicles

Multi‑gear transmission systems are commonly used in electric traction drives for medium and heavy‑duty vehicles, while most passenger‑vehicle electric drivetrains rely on a single fixed ratio to reduce cost, weight, and complexity. Using multiple gear ratios can enable downsizing of the motor and inverter while still meeting performance requirements. Additionally, appropriately chosen ratios allow the motor to operate more frequently in high‑efficiency regions, improving overall energy usage and reducing operating costs over the drive cycle. This paper presents a systematic approach for selecting optimal gear ratios for electric drive systems. A neural‑network model is first developed to represent motor losses across the full torque–speed range using data generated from finite element analysis. This model enables fast, accurate evaluation of motor efficiency under varying operating conditions. A genetic‑algorithm‑based optimization framework is then applied to identify gear ratios that maximize energy cost savings over the drive cycle, with the resulting optimal ratios stored for real‑time implementation.

Gadiyar, Nishanth [ORNL] (ORCID:0000000348267524)↗
DOE OSTI2024

Low-temperature gas-phase formation of cyclopentadiene and its role in the formation of aromatics in the interstellar medium

The cyclopentadiene (C 5 H 6 ) molecule has emerged as a molecular building block of nonplanar polycyclic aromatic hydrocarbons (PAHs) and carbonaceous nanostructures such as corannulene (C 20 H 10 ), nanobowls (C 40 H 10 ), and fullerenes (C 60 ) in deep space. However, the underlying elementary gas-phase processes synthesizing cyclopentadiene from acyclic hydrocarbon precursors have remained elusive. Here, by merging crossed molecular beam experiments with rate coefficient calculations and comprehensive astrochemical modeling, we afford persuasive testimony on an unconventional low-temperature cyclization pathway to cyclopentadiene from acyclic precursors through the reaction of the simplest diatomic organic radical—methylidyne (CH)—with 1,3-butadiene (C 4 H 6 ) representing main route to cyclopentadiene observed in TaurusMolecular Cloud. This facile route provides potential solution for the incorporation of the cyclopentadiene moiety in complex aromatic systems via bottom–up molecular mass growth processes and offers an entry point to the low-temperature chemistry in deep space leading eventually to nonplanar PAHs in our carbonaceous Universe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Medium- and Heavy-Duty Truck Duty Cycles

This dataset provides second-by-second duty cycle data for Class 6 and Class 8 diesel trucks in Texas, including key vehicle metrics, engine-related data, and GPS data (excluding GPS latitude and longitude to ensure confidentiality). The data were collected via tablets installed on the trucks and organized into daily datasets, each associated with a unique vehicle ID and date. There are 12 daily datasets for Class 6 diesel trucks (three unique vehicle IDs) and 43 daily datasets for Class 8 diesel trucks (six unique vehicle IDs). The units associated with each column are included in the name. The engine performance data include columns such as engine speed, engine percent torque, and engine fuel rate. Road grade (%/100) was estimated using the GPS altitude and wheel-based vehicle speed, which is used as an input for FASTSim. Cumulative distance was also calculated using the wheel-based vehicle speed. Additional columns include: - Engine Speed (RPM): Removed inaccurate readings and used to calculate angular velocity (radians/second). - Torque (N·m): Calculated using engine percent torque, nominal friction percent torque, and engine reference torque values (those columns were removed from dataset), then normalized to express as torque (%). - Flywheel Power (%): Calculated using the angular velocity and torque (in kW), then normalized as a percentage of the maximum value. - Engine Fuel Rate (%) and Torque (%): Both metrics were normalized by dividing by their respective maximum values within each dataset to express them as percentages. The datasets were analyzed to assess the energy impact of various driving behaviors, simulate energy efficiency, and recommend optimal routes for diesel trucks using NLR’s tool called RouteE. For driver coaching, factors like speed and acceleration limits were considered, and idle periods were reduced (assuming the engine was off during idling) to adjust each drive cycle. These adjusted drive cycles were then simulated in FASTSim to evaluate their effect on fleet energy consumption and estimate potential energy savings. The original cycles are available for download on this page ![image](CoVaR_Image_for_Data_Page_Kenworth_Truck.jpg)

1Hz↗