Search NASA⌕ Search

SEARCH · Search NASA

Results for “millimeter astronomy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

In-Flight Performance of the Water Vapor Monitor Onboard the Sofia Observatory

NASA's Stratospheric Observatory for Infrared Astronomy (SOFIA) airborne observatory flies in a modified B747-SP aircraft in the lower stratosphere above more than 99.9% of the Earth's water vapor. As low as this residual water vapor is, it will still affect SOFIA's infrared and sub-millimeter astronomical observations. As a result, a heterodyne instrument has been developed to observe the strength and shape of the 1830Hz rotational line of water, allowing measurements of the integrated water vapor overburden in flight. In order to be useful in correcting the astronomical signals, the required measured precipitable water vapor accuracy must be 2 microns or better, 3 sigma, and measured at least once a minute. The Water Vapor Monitor has flown 22 times during the SOFIA Early Science shared-risk period. The instrument water vapor overburden data obtained were then compared with concurrent data from GOES-V satellites to perform a preliminary calibration of the measurements. This presentation will cover the.results of these flights. The final flight calibration necessary to reach the required accuracy will await subsequent flights following the SOFIA observatory upgrade that is taking place during the spring and summer of 2012.

Roellig, Thomas L.↗

Advanced radiometric and interferometric milimeter-wave scene simulations

Smart munitions and weapons utilize various imaging sensors (including passive IR, active and passive millimeter-wave, and visible wavebands) to detect/identify targets at short standoff ranges and in varied terrain backgrounds. In order to design and evaluate these sensors under a variety of conditions, a high-fidelity scene simulation capability is necessary. Such a capability for passive millimeter-wave scene simulation exists at TRW. TRW's Advanced Radiometric Millimeter-Wave Scene Simulation (ARMSS) code is a rigorous, benchmarked, end-to-end passive millimeter-wave scene simulation code for interpreting millimeter-wave data, establishing scene signatures and evaluating sensor performance. In passive millimeter-wave imaging, resolution is limited due to wavelength and aperture size. Where high resolution is required, the utility of passive millimeter-wave imaging is confined to short ranges. Recent developments in interferometry have made possible high resolution applications on military platforms. Interferometry or synthetic aperture radiometry allows the creation of a high resolution image with a sparsely filled aperture. Borrowing from research work in radio astronomy, we have developed and tested at TRW scene reconstruction algorithms that allow the recovery of the scene from a relatively small number of spatial frequency components. In this paper, the TRW modeling capability is described and numerical results are presented.

Hauss, B. I.↗

Multi-spectral Observations of the Star Formation: the Role of Far Infrared Photometry

The study and analysis of complex astrophysical process requires a multispectral approach employing many of the tools of modern astronomy. The study of the interaction of early type stars with the interstellar medium is an example of this point. Two examples of multi-spectral studies of individual objects are reviewed. The predominent theme is the combination of high resolution far infrared photometry, radio images and millimeter-wave spectroscopy with the radio sensitive to the ionization, the millimeter-wave lines showing the structure and excitation of the gas and the far infrared providing a picture of the energetics of the dust which connects the star to the interstellar medium. Multispectral observations of FIRSSE and IRAS objects are discussed.

Schwartz, P. R.↗

Thermal Balance in Dense Molecular Clouds: Radiative Cooling Rates and Emission-Line Luminosities

We consider the radiative cooling of fully shielded molecular astrophysical gas over a wide range of temperatures ( 10 K < T < 2500 K) and H2 densities ( 10(exp 3)/cc < n(H2) < 10(exp 10)/cc). Our model for the radiative cooling of molecular gas includes a detailed treatment of the interstellar chemistry that determines the abundances of important coolant molecules, and a detailed treatment of the excitation of the species H2, CO, H2O, HCl, O2, C, O, and their isotopic variants where important. We present results for the total radiative cooling rate and for the cooling rate due to individual coolant species, as a function of the gas temperature, density, and optical depth. We have also computed the individual millimeter, submillimeter, and far-infrared line strengths that contribute to the total radiative cooling rate, and we have obtained example spectra for the submillimeter emission expected from molecular cloud cores. Many of the important cooling lines will be detectable using the Infrared Space Observatory and the Submillimeter Wave Astronomy Satellite.

Neufeld, David A.↗

Infrared Galaxies Detected by the Atacama Cosmology Telescope

We report on 167 infrared (IR) galaxies selected by AKARI and IRAS and detected in the Atacama Cosmology Telescope (ACT) Data Release 5 (DR5) sky maps at the 98, 150, and 220 GHz frequency bands. Of these detections, 134 (80%) of the millimeter counterparts are first-time identifications with ACT. We expand the previous ACT extragalactic source catalogs, by including new 98 GHz detections and measurements from ACT DR5. We also report flux density measurements at the 98, 150, and 220 GHz frequency bands. We compute α 98-150 , α 98-220 , and α 150-220 millimeter-wave spectral indices and far-IR to millimeter-wave spectral indices between 90 μm and 98, 150, and 220 GHz. We specify the galaxy type, based on α 150-220 . We combine publicly available multiwavelength data—including ultraviolet, optical, near-IR, mid-IR, far-IR, and the millimeter measurements obtained in this work—and perform spectral energy distribution (SED) fitting with CIGALE. With the radio emission decomposition advantage of CIGALE V2022.0, we identify the origins of the millimeter emissions for 69 galaxies in our sample. Our analysis also shows that millimeter data alone indicates the need for a radio synchrotron component in the SEDs that are produced by active galactic nuclei (AGNs) and/or star formation. We present SEDs and measured physical properties of these galaxies, such as the dust luminosity, AGN luminosity, the total IR luminosity, and the ratio of the IR and radio luminosity. We quantify the relationships between the total IR luminosity and the millimeter-band luminosities, which can be used in the absence of SED analysis.

79 ASTRONOMY AND ASTROPHYSICS↗

Phosphine in the Venusian Atmosphere: A Strict Upper Limit from SOFIA GREAT Observations

The presence of phosphine (PH3) in the atmosphere of Venus was reported by Greaves et al. based on observations of the J = 1–0 transition at 267 GHz using ground-based, millimeter-wave spectroscopy. This unexpected discovery presents a challenge for our understanding of Venus's atmosphere, and has led to a reappraisal of the possible sources and sinks of atmospheric phosphorous-bearing gases. Here we present results from a search for PH3 on Venus using the German REceiver for Astronomy at Terahertz Frequencies instrument aboard the Stratospheric Observatory for Infrared Astronomy aircraft, over three flights conducted in November 2021. Multiple PH3 transitions were targeted at frequencies centered on 533 and 1,067 GHz, but no evidence for atmospheric PH3 was detected. Through radiative transfer modeling, we derived a disk-averaged upper limit on the PH3 abundance of 0.8 ppb in the altitude range 75–110 km, which is more stringent than previous ground-based studies.

M. A. Cordiner↗

Bolometric Array Detectors for Space-Borne Astronomy

Funding from the NASA Innovative Research Grant was used to develop bolometric detectors. As described in the proposal, silicon nitride micromesh ('spider-web') absorbers had been demonstrated at U.C. Berkeley but not developed to be flight-worthy devices. We proceeded to first fabricate bolometers with Neutron Transmutation Doped (NTD) Ge thermistors that demonstrated high optical coupling (Church et al. 1996) and were developed for a ground-based millimeter-wave receiver (Mauskopf et al. 1997). The next generation of devices used In bump-bonded thermistors to achieve devices with performance product NEP*sqrt(tau) = 3e - 18 j at 300 mK, demonstrating a full order of magnitude improvement over pervious devices. These devices achieved an NEP = 1e-18 W/rtHz (Murray et al. 1996) as promised in the proposal. Sensitivities as good as 1e - 19 W/rtHz appear achievable with the silicon nitride architecture (Bock et al. 1997). Finally, arrays of micromesh bolometers were shown to be feasible in the last year of the program by etching a large number of devices on a single silicon wafer (75 mm). Full arrays were subsequently demonstrated for selection on the ESA/NASA Far-Infrared Space Telescope (FIRST) in competition with detectors provided by CEA in France and GSFC in the US Micromesh bolometer arrays are now baselined for both the ESA/NASA Planck and FIRST missions.

Lange, Andrew E.↗

Disk transport rates from Ti isotopic signatures of refractory inclusions

Abstract The early solar system was a dynamic period during which the formation of early solids set into motion the process of planet building. Although both astrophysical observations and theoretical modeling demonstrate the presence of widespread transport of material, we lack concrete quantitative constraints on timings, distances, and mechanisms thereof. To trace these transport processes, one needs objects of known early formation times and these objects would need to be distributed throughout parent bodies with known accretion times and distances. Generally, these criteria are met by “regular” (i.e., non–fractionated and unidentified nuclear and excluding hibonite‐rich) Ca‐Al‐rich inclusions (CAIs) as these objects formed very early and close to the young Sun and contain distinctive nucleosynthetic isotope anomalies that permit provenance tracing. However, nucleosynthetic isotopic signatures of such refractory inclusions have so far primarily been analyzed in chondritic meteorites that formed within ~4 AU from the Sun. Here, we investigate Ti isotopic signatures of four refractory inclusions from the ungrouped carbonaceous chondrite WIS 91600 that was previously suggested to have formed beyond ~10 AU from the Sun. We show that these inclusions exhibit correlated excesses in 50 Ti and 46 Ti and lack large Ti isotopic anomalies that would otherwise be indicative of more enigmatic refractory materials with unknown formation ages. Instead, these isotope systematics suggest the inclusions to be genetically related to regular CAIs commonly found in other chondrites that have a broadly known formation region and age. Collectively, this implies that a common population of CAIs was distributed over the inner ~10 AU within ~3.5 Myr, yielding an average (minimum) speed for the transport of millimeter‐scale material in the early solar system of ~1 cm s −1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Emission from small dust particles in diffuse and molecular cloud medium

Infrared Astronomy Satellite (IRAS) observations of the whole galaxy has shown that long wavelength emission (100 and 60 micron bands) can be explained by thermal emission from big grains (approx 0.1 micron) radiating at their equilibrium temperature when heated by the InterStellar Radiation Field (ISRF). This conclusion has been confirmed by continuum sub-millimeter observations of the galactic plane made by the EMILIE experiment at 870 microns (Pajot et al. 1986). Nevertheless, shorter wavelength observations like 12 and 25 micron IRAS bands, show an emission from the galactic plane in excess with the long wavelength measurements which can only be explained by a much hotter particles population. Because dust at equilibrium cannot easily reach high temperatures required to explain this excess, this component is thought to be composed of very small dust grains or big molecules encompassing thermal fluctuations. Researchers present here a numerical model that computes emission, from Near Infrared Radiation (NIR) to Sub-mm wavelengths, from a non-homogeneous spherical cloud heated by the ISRF. This model fully takes into account the heating of dust by multi-photon processes and back-heating of dust in the Visual/Infrared Radiation (VIS-IR) so that it is likely to describe correctly emission from molecular clouds up to large A sub v and emission from dust experiencing temperature fluctuations. The dust is a three component mixture of polycyclic aromatic hydrocarbons, very small grains, and classical big grains with independent size distributions (cut-off and power law index) and abundances.

Bernard, J. P.↗

Wake forces in a background of quadratically coupled mediators

Two particles can exert forces on each other when embedded in a sea of weakly coupled particles. These “wake forces” occur whenever the source and target particles have quadratic interactions with the mediating particles; they are proportional to the ambient energy density and typically have a range of order the characteristic de Broglie wavelength of the background. The effect can be understood as source particles causing a disturbance in the background waves—a wake—which subsequently interacts with the target particles. Wake forces can be mediated by bosons or fermions, can have spin dependence, may be attractive or repulsive, and have a generally anisotropic spatial profile and range that depends on the phase-space distribution of the ambient particles. In this work, I investigate the application of wake forces to dark matter searches, recast existing limits on short-range forces into leading constraints on dark matter with quadratic couplings, and sketch out potential experimental modifications to optimize sensitivity. Wake forces occur in the Standard Model: the presence of the cosmic neutrino background induces a millimeter-range force about 22 orders of magnitude weaker than gravity. Wake forces may also be relevant in condensed-matter and atomic physics. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

A Brief Summary of Some of the Laboratory Astrophysics Workshop

Our present knowledge of the molecular universe has come primarily from radio observations [ I include here millimeter and submillimeter in this rubric]. There are a number of reasons for this but the primary one is the extremely high spectral resolution. The ease of observing emission from the volume of dense molecular clouds without significant attenuation by scattering from dust has shown this to be the powerful observational tool for molecular astronomy. Finally the relative simplicity of rotational compared to vibrational or electronic spectroscopy allows carrier identification as well as facile evaluation of cloud conditions such as density and temperature. These virtues become tenuous as the astronomical observations are pushed to higher frequencies for enhanced observational sensitivity. Thus precision rest frequencies are mandatory for the search for new species. We may inquire about which new species require particular attention, and which species may be relatively safely predicted on the basis of lower frequency laboratory measurements. For a rigid rotor the three rotational constants are sufficient to completely specify the transition frequencies. The intensities require the three components of the electric dipole moment. For semirigid species, where the centrifugal distortion, may be treated at the quartic level of angular momentum (Bunker et al. 1998), up to five additional constants are required (Watson 1967). There are a number of such species of considerable interest, where laboratory measurements are adequate for astronomical searches.

Klemperer, William↗

Infrared Astronomy

Several observational programs in infrared astronomy are described and significant findings are briefly discussed. The near infrared work concentrates largely on the use of the 5 m Hale telescope in spectroscopic and photometric studies of extragalactic sources. Observations of the P alpha line profile in a low redshift quasar, X-ray bursters, reflection nebula, and cataclysmic variables are included. Millimeter continuum observations of dust emission from quasars and galactic molecular clouds are also discussed. Finally, improvements to instrumentation are reported.

Neugebauer, G.↗

The Stratospheric Observatory for Infrared Astronomy (SOFIA) - Current Status, Recent Results, Future Plans, and Synergies with the AKARI Archive

The Stratospheric Observatory for Infrared Astronomy comprises a 2.7m diameter telescope mounted in a heavily modified B747SP aircraft. The SOFIA program is a joint US NASA and German DLR program, with the development and operations costs split roughly 80%:20%, respectively. Although the observatory is funded by these two nations, its observing time is open to proposals from astronomers of any nationality. The observatory has been flying and taking scientific data since 2010 and currently observes astronomical targets from the stratosphere for approximately 800 research flight hours per year. Seven science instruments (with an eighth coming online in 2020) cover the visible to sub-millimeter wavelengths with a variety of spectral resolutions ranging up to 1e8. The AKARI Archive with its 1.7 to 180 micron wavelength coverage is a natural complementary source for follow-up observations with SOFIA. This presentation will cover the current SOFIA technical capabilities and will present a few recent science highlights that demonstrate the SOFIA/AKARI complementarity. The presentation will also cover the SOFIA proposal process and will summarize other partnership opportunities for additional observing time on SOFIA.

Astronomy↗

Indium Hybridization of Large Format TES Bolometer Arrays to Readout Multiplexers for Far-Infrared Astronomy

The advance of new detector technologies combined with enhanced fabrication methods has resulted in an increase in development of large format arrays. The next generation of scientific instruments will utilize detectors containing hundreds to thousands of elements providing a more efficient means to conduct large area sky surveys. Some notable detectors include a 32x32 x-ray microcalorimeter for Constellation-X, an infrared bolometer called SAFIRE to fly on the airborne observatory SOFIA, and the sub-millimeter bolometer SCUBA-2 to be deployed at the JCMT which will use more than 10,000 elements for two colors, each color using four 32x40 arrays. Of these detectors, SCUBA-2 is farthest along in development and uses indium hybridization to multiplexers for readout of the large number of elements, a technology that will be required to enable the next generation of large format arrays. Our current efforts in working toward large format arrays have produced GISMO, the Goddard IRAM Superconducting 2-Millimeter observer. GISMO is a far infrared instrument to be field tested later this year at the IRAM 30 meter telescope in Spain. GISMO utilizes transition edge sensor (TES) technology in an 8x16 filled array format that allows for typical fan-out wiring and wire-bonding to four 1x32 NIST multiplexers. GISMO'S electrical wiring is routed along the tops of 30 micron walls which also serve as the mechanical framework for the array. This architecture works well for the 128 element array, but is approaching the limit for routing the necessary wires along the surface while maintaining a high fill factor. Larger format arrays will benefit greatly from making electrical connections through the wafer to the backside, where they can be hybridized to a read-out substrate tailored to handling the wiring scheme. The next generation array we are developing is a 32x40 element array on a pitch of 1135 microns that conforms to the NIST multiplexer, already developed for the SCUBA-2 instrument This architecture will utilize electrical connections that route from the TES to the support frame and through the wafer. The detector chip will then be hybridized to the NIST multiplexer via indium bump bonding. In our development scheme we are using substrates that allow for diagnostic testing of electrical continuity across the entire array and we are testing our process to minimize or eliminate any contact resistance at metal interfaces. Our goal is hybridizing a fully functional 32x40 array of TES bolometers to a NIST multiplexer. The following work presents our current progress toward enabling this technology.

Miller, Timothy M.↗

Molecular astronomy at submillimeter wavelengths

It is pointed out that the region of the spectrum from 300 to 3000 GHz (100 to 1000 microns), which is referred to as the submillimeter, is one of the least explored areas in the electromagnetic spectrum. The reasons for this situation are related to a lack of adequate instrumentation for detecting the radiation and an almost complete absorption of the radiation by the earth's atmosphere. The vast majority of the rotational transitions of molecules occur in the millimeter and submillimeter wavelength region of the spectrum. The strength of the lines increases at higher frequencies until a condition is reached in which the energy levels are no longer populated. The study of molecular clouds at submillimeter wavelengths promises to provide new important results. Attention is given to the design of suitable submillimeter receivers, problems of atmospheric transmission, and galactic molecular lines.

Buhl, D.↗

Airborne Astronomy Program

Our understanding about the inter-relationship between the collapsing cloud envelope and the disk has been greatly altered. While the dominant star formation models invoke free fall collapse and r(sup -1.5) density profile, other star formation models are possible. These models invoke either different cloud starting conditions or the mediating effects of magnetic fields to alter the cloud geometry during collapse. To test these models, it is necessary to understand the envelope's physical structure. The discovery of disks, based on millimeter observations around young stellar objects, however makes a simple interpretation of the emission complicated. Depending on the wavelength, the disk or the envelope could dominate emission from a star. In addition, the discovery of planets around other stars has made understanding the disks in their own right quite important. Many star formation models predict disks should form naturally as the star is forming. In many cases, the information we derive about disk properties depends implicitly on the assumed envelope properties. How to understand the two components and their interaction with each other is a key problem of current star formation.

Butner, Harold M.↗

Alma Images the Eccentric HD 53143 Debris Disk

We present ALMA 1.3 mm observations of the HD 53143 debris disk—the first infrared or millimeter image produced of this ∼1 Gyr old solar analog. Previous HST STIS coronagraphic imaging did not detect flux along the minor axis of the disk, which could suggest a face-on geometry with two clumps of dust. These ALMA observations reveal a disk with a strikingly different structure. In order to fit models to the millimeter visibilities and constrain the uncertainties on the disk parameters, we adopt a Markov Chain Monte Carlo approach. This is the most eccentric debris disk observed to date with a forced eccentricity of 0.21 ± 0.02, nearly twice that of the Fomalhaut debris disk, and also displays an apocenter glow. Although this eccentric model fits the outer debris disk well, significant interior residuals remain, which may suggest a possible edge-on inner disk, which remains unresolved in these observations. Combined with the observed structure difference between HST and ALMA, these results suggest a potential previous scattering event or dynamical instability in this system. We also note that the stellar flux changes considerably over the course of our observations, suggesting flaring at millimeter wavelengths. Using simultaneous TESS observations, we determine the stellar rotation period to be 9.6 ± 0.1 days.

Radio astronomy↗

Deep learning simulations of the microwave sky

Here we present 500 high-resolution, full-sky millimeter-wave deep learning (DL) simulations that include lensed CMB maps and correlated foreground components. We find that these MillimeterDL simulations can reproduce a wide range of non-Gaussian summary statistics matching the input training simulations, while only being optimized to match the power spectra. The procedure we develop in this work enables the capability to mass produce independent full-sky realizations from a single expensive full-sky simulation, when ordinarily the latter would not provide enough training data. We also circumvent a common limitation of high-resolution DL simulations that they be confined to small sky areas, often due to memory or GPU issues; we do this by developing a “stitching” procedure that can recover the large-scale, high-order statistics and avoid discontinuities or repeated features in the maps. In addition, since our network takes as input a full-sky lensing convergence map, it can in principle take a full-sky lensing convergence map from any large-scale structure (LSS) simulation and generate the corresponding lensed CMB and correlated foreground components at millimeter wavelengths; this is especially useful in the current era of combining results from both CMB and LSS surveys, which require a common set of simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗