Results for “mixed phase” — Page 8

NASA NTRS2023

A Surface Radiation Balance Data Set from Siple Dome in West Antarctica for Atmospheric and Climate Model Evaluation

A field campaign at Siple Dome in West Antarctica during the austral summer 2019-2020 offers an opportunity to evaluate climate model performance, particularly cloud microphysical simulation. Over Antarctic ice sheets and ice shelves, clouds are a major regulator of the surface energy balance, and in the warm season their presence occasionally induces surface melt that can gradually weaken an ice shelf structure. This dataset from Siple Dome, obtained using transportable and solar-poweredequipment, includes surface energy balance measurements, meteorology and cloud remote sensing. To demonstrate how these data can be used to evaluate model performance, comparisons are made with meteorological reanalysis known to give generally good performance over Antarctica (ERA5). Surface albedo measurements show expected variability with observed cloud amount, and can be used to evaluate a model's snowpack parameterization. One case study discussed involves a squall with northerly winds, during which ERA5 fails to produce cloud cover throughout one of the days. A second case study illustrates how shortwave spectroradiometer measurements that encompass the 1.6-micron atmospheric window reveal cloud phase transitions associated with cloud lifecycle. Here, continuously precipitating mixed-phase clouds become mainly liquid water clouds from local morning through the afternoon, not reproduced by ERA5. We challenge researchers to run their various regional or global models in a manner that has the large-scale meteorology follow the conditions of this field campaign, compare cloud and radiation simulations with this Siple Dome dataset, and potentially investigate why cloud microphysical simulations or other model components might produce discrepancies with these observations.

cloud remote sensing↗

NASA NTRS1973

A shock-induced phase change in orthoclase.

New shock compression data to 340 kb for single-crystal orthoclase (along (001)), demonstrate the onset of a shock-induced phase change at about 115 kb. Along the Hugoniot a mixed-phase region extends to about 300 kb, above which the data are believed to correspond to the properties of a high-pressure phase having the hollandite structure (zero pressure density of 3.84 g/cu cm) reported by Ringwood et al. If the hollandite value for the zero pressure density is used, the zero pressure bulk modulus of this phase is approximately 1.8 plus or minus 0.2 Mb.

Ahrens, T. J.↗

DOE OSTI2025

Galactic echoes

Gaia has revealed a variety of substructures in the phase space of stars in the Solar neighbourhood, including the vertical ‘Snail’ $(z, v_z)$ in space. Such substructures are often interpreted as the incompletely phase-mixed response of the disc stars to a single perturbation, such as an impulsive encounter with a satellite galaxy. In this paper, we consider the possibility that such structures contain manifestations of phase-space echoes. First established in plasma physics in the 1960s, echoes arise when a collisionless system is perturbed twice: the macroscopic responses to both perturbations mix to small scales in phase space, whereupon they couple non-linearly, producing a third macroscopic ‘echo’ response without the need for a third perturbation. We derive the galactic analogue of the plasma echo theory using angle-action variables and apply it to a one-dimensional model of vertical motion in the Milky Way. We verify the predicted echo behaviour using idealized test particle simulations, both with and without the inclusion of diffusion through orbital scattering off molecular clouds. While we conclude that the Gaia Snail itself is unlikely a (pure) echo effect, the basic physics we uncover is sufficiently generic that we expect phase-space echoes to be common in disc galaxies.

Galaxy: evolution↗

DOE OSTI2025

Hardness of Observing Strong-to-Weak Symmetry Breaking

Spontaneous symmetry breaking (SSB) is the cornerstone of our understanding of quantum phases of matter. Recent works have generalized this concept to the domain of mixed states in open quantum systems, where symmetries can be realized in two distinct ways dubbed strong and weak. Novel intrinsically mixed phases of quantum matter can then be defined by the spontaneous breaking of strong symmetry down to weak symmetry. However, proposed order parameters for strong-to-weak SSB (based on mixed-state fidelities or purities) seem to require exponentially many copies of the state, raising the question: Is it possible to efficiently detect strong-to-weak SSB, in general? In this work, we answer this question negatively in the paradigmatic cases of ℤ2 and U(1) symmetries. We construct ensembles of pseudorandom mixed states that do not break the strong symmetry yet are computationally indistinguishable from states that do. This rules out the existence of efficient state-agnostic protocols to detect strong-to-weak SSB.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS2006

Detecting Trends in Tropical Rainfall Characteristics, 1979-2003

From analyses of blended space-based and ground-based global rainfall data, we found increasing trends in the occurrence of extreme heavy and light rain events, coupled to a decreasing trend in moderate rain events in the tropics during 1979-2003. The trends are consistent with a shift in the large-scale circulation associated with a) a relatively uniform increase in warm rain over the tropical oceans, b) enhanced ice-phase rain over the near-equatorial oceans, and c) reduced mixed-phase rain over the tropical ocean and land regions. Due to the large compensation among different rain categories, the total tropical rainfall trend remained undetectable.

Lau, K. M.↗

DOE OSTI2025

Enhancing the Multifunctional Photocatalytic Activity of Sustainable Magnetic Nanoparticles

The development of efficient photocatalytic materials has intensified in response to increasing emphasis on sustainable energy conversion and environmental restoration. However, the excessive use and indiscriminate release of heavy metals from photocatalytic nanoparticles pose potential environmental risks. This study provides insights into optimizing visible-light-active photocatalysts to enhance their photocatalytic properties and stability. Specifically, cobalt doping and controlled pH modulation are employed on the modified Fe 3 O 4 , forming two distinct samples: Co@Fe 3 O 4 -B (base-treated) and Co@Fe 3 O 4 -A (acid-treated) nanoparticles. Microscopic characterization reveals that Co@Fe 3 O 4 -A undergoes a phase transition to hematite, whereas Co@Fe 3 O 4 -B retains its mixed-phase configuration. Spectroscopic analyses confirm that the cobalt dopants decorate the outskirts of each nanoparticle, forming a core–shell structure. However, Co@Fe 3 O 4 -B exhibit Co 2+ states with a high oxygen vacancy content, whereas Co@Fe 3 O 4 -A contain mixed Co 2+/3+ states. The high density of defect states in the Co@Fe 3 O 4 -B results in superior photocatalytic efficiency, achieving near-complete oxidation of furfuraldehyde (97% conversion) and 5-hydroxymethylfurfural (94% conversion), as well as effective degradation of toluene (78% conversion). This study demonstrates that the combined approach of doping and pH treatment is promising for the surface-defect engineering of photocatalysts, enhancing their multifunctional performance and reusability for sustainable energy conversion.

Fe3 O4 nanoparticles↗

DOE OSTI2025

Imaging quantum melting in a disordered 2D Wigner solid

Two-dimensional strongly interacting electrons crystalize into a solid phase known as the Wigner crystal at low densities and form a Fermi liquid at high densities. At intermediate densities, the two-dimensional solid evolves into a strongly correlated liquid phase around a critical density. We observed this quantum melting of a disordered Wigner solid in bilayer molybdenum diselenide (MoSe2) using a noninvasive scanning tunneling microscopy imaging technique. At low densities, the Wigner solid forms nanocrystalline domains pinned by local disorder. It exhibits a quantum densification behavior with increased densities in the solid phase. Above a threshold density, the Wigner solid melts locally and enters a mixed phase in which solid and liquid regions coexist. The liquid regions expand and form a percolation network at even higher densities.

Xiang, Ziyu↗

NASA NTRSDate not supplied

TPSAS-NF1676L-23557-DND

The Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) measures both parallel and perpendicular backscatter of linearly polarized 532 nm light from cloud particles in the atmosphere. The perpendicular component of the return signal allows differentiation between cloud layers consisting of spherical water droplets from those with non-spherical ice particles. A two-way distribution of layer-integrated 532 nm total backscatter and the layer-integrated 532 nm depolarization ratio further differentiates between water cloud layers with significant multiple scattering, horizontally-oriented ice particles that cause specular reflections, and randomly-oriented ice particles, as described in Hu et al., 2009. The cloud phase algorithm functions well for the majority of clouds, but there have been some recent changes and improvements that are described in this poster. The impact of the CALIOP viewing angle change from near-nadir (0.3 degrees) to slightly tilted (3.0 degrees) on the optical properties of the various CALIOP cloud particle phases is also shown. A major improvement to the phase algorithm is the limitation of a spatial coherence test for horizontally-oriented ice to cloud layers that have sufficient integrated attenuated backscatter to likely contain HOI. This change reduces a "striping" effect caused by noisiness in the spatial coherence test for thin cloud layers. Additional temperature tests are considered, and the regional and vertical distribution of cloud layers with the various CALIOP cloud phases is shown. Only one cloud particle phase is allowed for each 5 km portion of a cloud layer that is considered by the cloud phase algorithm, so we use in situ aircraft and CloudSat observations to determine how the CALIOP cloud phase algorithm is treating optically and thermally thick clouds, which may be mixed-phase.

Melody Avery↗

DOE OSTI2025

Mixed-state geometric phases of coherent and squeezed spin states

Two mixed-state geometric phases, known as the Uhlmann phase and interferometric geometric phase (IGP), of spin coherent states (CSSs) and spin squeezed states (SSSs) are analyzed. Exact solutions and numerical results of selected examples are presented. For the 𝑗=3/2 CSS, the Uhlmann phase exhibits finite-temperature topological phase transitions characterized by abrupt jumps. The IGP for the same state similarly shows discontinuous jumps as the temperature varies. In the case of the 𝑗=1 one-axis SSS, both the Uhlmann phase and IGP display discrete finite-temperature jumps. By contrast, the 𝑗=1 two-axis SSS shows no such transitions because the Uhlmann phase and IGP both vary smoothly with temperature. Here, we also briefly discuss potential realizations and simulations related to these phenomena in spin systems.

Geometric & topological phases↗

NASA NTRS1993

Squeezing in phase-conjugated resonance fluorescence

Emission of resonance fluorescence by an atom near the surface of a four-wave mixing phase conjugator is considered. The dipole radiation field, regarded as a Heisenberg-operator field, is decomposed into plane waves with the aid of Weyl's representation of the Green's function for the wave equation. Each plane-wave component which is incident on the surface of the nonlinear medium, is reflected as its phase-conjugate image. Summation of all reflected plane waves then yields the phase conjugate replica of the incident dipole radiation. This field adds to the radiation which is emitted by the atom into the direction away from the medium. The condition under which squeezing occurs in the emitted resonance fluorescence is investigated.

Arnoldus, Henk F.↗

DOE OSTI2025

Marine Boundary Layer Cloud Boundaries and Phase Estimation Using Airborne Radar and In Situ Measurements During the SOCRATES Campaign over Southern Ocean

The Southern Ocean Clouds, Radiation, Aerosol Transport Experimental Study (SOCRATES) was an aircraft-based campaign (15 January–26 February 2018) that deployed in situ probes and remote sensors to investigate low-level clouds over the Southern Ocean (SO). A novel methodology was developed to identify cloud boundaries and classify cloud phases in single-layer, low-level marine boundary layer (MBL) clouds below 3 km using the HIAPER Cloud Radar (HCR) and in situ measurements. The cloud base and top heights derived from HCR reflectivity, Doppler velocity, and spectrum width measurements agreed well with corresponding lidar-based and in situ estimates of cloud boundaries, with mean differences below 100 m. A liquid water content–reflectivity (LWC-Z) relationship, LWC = 0.70Z0.29, was derived to retrieve the LWC and liquid water path (LWP) from HCR profiles. The cloud phase was classified using HCR measurements, temperature, and LWP, yielding 40.6% liquid, 18.3% mixed-phase, and 5.1% ice samples, along with drizzle (29.1%), rain (3.2%), and snow (3.7%) for drizzling cloud cases. The classification algorithm demonstrates good consistency with established methods. This study provides a framework for the boundary and phase detection of MBL clouds, offering insights into SO cloud microphysics and supporting future efforts in satellite retrievals and climate model evaluation.

MBL clouds over Southern Ocean↗

NASA NTRS1972

Preparation of pigments for space-stable thermal control coatings

The identification and control of vapor phase reaction kinetics to produce pigments by homogeneous nucleation were achieved. A vapor phase apparatus was designed, fabricated, and calibrated through 1800 C. Vapor phase reactions were analyzed, calculations made, and powders of alumina, rutile, zinc orthotitanate (in a mixed phase), calcium tungstate, and lanthana were produced by homogeneous nucleation. Electron microscopy shows uniform particle morphology and size, and supports anticipated advantages of vapor-phase homogeneous nucleation; namely, purity, freedom from defects, and uniform particle sizing without grinding.

Campbell, W. B.↗

NASA NTRS1997

On The Validity of the Assumed PDF Method for Modeling Binary Mixing/Reaction of Evaporated Vapor in GAS/Liquid-Droplet Turbulent Shear Flow

An Investigation of the statistical description of binary mixing and/or reaction between a carrier gas and an evaporated vapor species in two-phase gas-liquid turbulent flows is perfomed through both theroetical analysis and comparisons with results from direct numerical simulations (DNS) of a two-phase mixing layer.

Vapor Binary Mixing Turbulent flows↗

NASA NTRS1996

Tank Pressure Control Experiment: Thermal Phenomena in Microgravity

The report presents the results of the flight experiment Tank Pressure Control Experiment/Thermal Phenomena (TPCE/TP) performed in the microgravity environment of the space shuttle. TPCE/TP, flown on the Space Transportation System STS-52, was a second flight of the Tank Pressure Control Experiment (TPCE). The experiment used Freon 113 at near saturation conditions. The test tank was filled with liquid to about 83% by volume. The experiment consisted of 21 tests. Each test generally started with a heating phase to increase the tank pressure and to develop temperature stratification in the fluid, followed by a fluid mixing phase for the tank pressure reduction and fluid temperature equilibration. The heating phase provided pool boiling data from large (relative to bubble sizes) heating surfaces (0.1046 m by 0.0742 m) at low heat fluxes (0.23 to 1.16 kW/sq m). The system pressure and the bulk liquid subcooling varied from 39 to 78 kPa and 1 to 3 C, respectively. The boiling process during the entire heating period, as well as the jet-induced mixing process for the first 2 min of the mixing period, was also recorded on video. The unique features of the experimental results are the sustainability of high liquid superheats for long periods and the occurrence of explosive boiling at low heat fluxes (0.86 to 1.1 kW/sq m). For a heat flux of 0.97 kW/sq m, a wall superheat of 17.9 C was attained in 10 min of heating. This superheat was followed by an explosive boiling accompanied by a pressure spike of about 38% of the tank pressure at the inception of boiling. However, at this heat flux the vapor blanketing the heating surface could not be sustained. Steady nucleate boiling continued after the explosive boiling. The jet-induced fluid mixing results were obtained for jet Reynolds numbers of 1900 to 8000 and Weber numbers of 0.2 to 6.5. Analyses of data from the two flight experiments (TPCE and TPCE/TP) and their comparison with the results obtained in drop tower experiments suggest that as Bond number approaches zero the flow pattern produced by an axial jet and the mixing time can be predicted by the Weber number.

Hasan, Mohammad M.↗

NASA NTRS1996

Tank Pressure Control Experiment: Thermal Phenomena in Microgravity. Video 2 of 4

The report presents the results of the flight experiment Tank Pressure Control Experiment/Thermal Phenomena (TPCE/TP) performed in the microgravity environment of the space shuttle. TPCE/TP, flown on the Space Transportation System STS-52, was a second flight of the Tank Pressure Control Experiment (TPCE). The experiment used Freon 113 at near saturation conditions. The test tank was filled with liquid to about 83 percent by volume. The experiment consisted of 21 tests. Each test generally started with a heating phase to increase the tank pressure and to develop temperature stratification in the fluid, followed by a fluid mixing phase for the tank pressure reduction and fluid temperature equilibration. The heating phase provided pool boiling data from large (relative to bubble sizes) heating surfaces (0.1046 m by 0.0742 m) at low heat fluxes (0.23 to 1.16 kW/m(exp 2)). The system pressure and the bulk liquid subcooling varied from 39 to 78 kPa and 1 to 3 deg C, respectively. The boiling process during the entire heating period, as well a jet-induced mixing process for the first 2 min. of the mixing period, was also recorded on video. Analyses of data from the two flight experiments (TPCE and TPCE/TP) and their comparison with the results obtained in drop tower experiments suggest that as Bond number approaches zero the flow pattern produced by an axial jet and the mixing time can be predicted by the Weber number. This is video 2 of 4.

Source record↗

NASA NTRS1996

Tank Pressure Control Experiment: Thermal Phenomena in Microgravity. Video 4 of 4

The report presents the results of the flight experiment Tank Pressure Control Experiment/Thermal Phenomena (TPCE/TP) performed in the microgravity environment of the space shuttle. TPCE/TP, flown on the Space Transportation System STS-52, was a second flight of the Tank Pressure Control Experiment (TPCE). The experiment used Freon 113 at near saturation conditions. The test tank was filled with liquid to about 83 percent by volume. The experiment consisted of 21 tests. Each test generally started with a heating phase to increase the tank pressure and to develop temperature stratification in the fluid, followed by a fluid mixing phase for the tank pressure reduction and fluid temperature equilibration. The heating phase provided pool boiling data from large (relative to bubble sizes) heating surfaces (0.1046 m by 0.0742 m) at low heat fluxes (0.23 to 1.16 kW/m(exp 2)). The system pressure and the bulk liquid subcooling varied from 39 to 78 kPa and 1 to 3 deg C, respectively. The boiling process during the entire heating period, as well a jet-induced mixing process for the first 2 min. of the mixing period, was also recorded on video. Analyses of data from the two flight experiments (TPCE and TPCE/TP) and their comparison with the results obtained in drop tower experiments suggest that as Bond number approaches zero the flow pattern produced by an axial jet and the mixing time can be predicted by the Weber number. This is video 4 of 4.

Source record↗

NASA NTRS1996

Tank Pressure Control Experiment: Thermal Phenomena in Microgravity. Video 1 of 4

The report presents the results of the flight experiment Tank Pressure Control Experiment/Thermal Phenomena (TPCE/TP) performed in the microgravity environment of the space shuttle. TPCE/TP, flown on the Space Transportation System STS-52, was a second flight of the Tank Pressure Control Experiment (TPCE). The experiment used Freon 113 at near saturation conditions. The test tank was filled with liquid to about 83 percent by volume. The experiment consisted of 21 tests. Each test generally started with a heating phase to increase the tank pressure and to develop temperature stratification in the fluid, followed by a fluid mixing phase for the tank pressure reduction and fluid temperature equilibration. The heating phase provided pool boiling data from large (relative to bubble sizes) heating surfaces (0.1046 m by 0.0742 m) at low heat fluxes (0.23 to 1.16 kW/m(exp 2)). The system pressure and the bulk liquid subcooling varied from 39 to 78 kPa and 1 to 3 deg C, respectively. The boiling process during the entire heating period, as well a jet-induced mixing process for the first 2 min. of the mixing period, was also recorded on video. Analyses of data from the two flight experiments (TPCE and TPCE/TP) and their comparison with the results obtained in drop tower experiments suggest that as Bond number approaches zero the flow pattern produced by an axial jet and the mixing time can be predicted by the Weber number. This is video 1 of 4.

Source record↗

NASA NTRS1996

Tank Pressure Control Experiment: Thermal Phenomena in Microgravity. Video 3 of 4

The report presents the results of the flight experiment Tank Pressure Control Experiment/Thermal Phenomena (TPCE/TP) performed in the microgravity environment of the space shuttle. TPCE/TP, flown on the Space Transportation System STS-52, was a second flight of the Tank Pressure Control Experiment (TPCE). The experiment used Freon 113 at near saturation conditions. The test tank was filled with liquid to about 83 percent by volume. The experiment consisted of 21 tests. Each test generally started with a heating phase to increase the tank pressure and to develop temperature stratification in the fluid, followed by a fluid mixing phase for the tank pressure reduction and fluid temperature equilibration. The heating phase provided pool boiling data from large (relative to bubble sizes) heating surfaces (0.1046 m by 0.0742 m) at low heat fluxes (0.23 to 1.16 kW/m(exp 2)). The system pressure and the bulk liquid subcooling varied from 39 to 78 kPa and 1 to 3 deg C, respectively. The boiling process during the entire heating period, as well a jet-induced mixing process for the first 2 min. of the mixing period, was also recorded on video. Analyses of data from the two flight experiments (TPCE and TPCE/TP) and their comparison with the results obtained in drop tower experiments suggest that as Bond number approaches zero the flow pattern produced by an axial jet and the mixing time can be predicted by the Weber number. This is video 3 of 4.

Source record↗