Search NASA⌕ Search

SEARCH · Search NASA

Results for “model in the loop”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Integrated active and passive control design methodology for the LaRC CSI evolutionary model

A general design methodology to integrate active control with passive damping was demonstrated on the NASA LaRC CSI Evolutionary Model (CEM), a ground testbed for future large, flexible spacecraft. Vibration suppression controllers designed for Line-of Sight (LOS) minimization were successfully implemented on the CEM. A frequency-shaped H2 methodology was developed, allowing the designer to specify the roll-off of the MIMO compensator. A closed loop bandwidth of 4 Hz, including the six rigid body modes and the first three dominant elastic modes of the CEM was achieved. Good agreement was demonstrated between experimental data and analytical predictions for the closed loop frequency response and random tests. Using the Modal Strain Energy (MSE) method, a passive damping treatment consisting of 60 viscoelastically damped struts was designed, fabricated and implemented on the CEM. Damping levels for the targeted modes were more than an order of magnitude larger than for the undamped structure. Using measured loss and stiffness data for the individual damped struts, analytical predictions of the damping levels were very close to the experimental values in the (1-10) Hz frequency range where the open loop model matched the experimental data. An integrated active/passive controller was successfully implemented on the CEM and was evaluated against an active-only controller. A two-fold increase in the effective control bandwidth and further reductions of 30 percent to 50 percent in the LOS RMS outputs were achieved compared to an active-only controller. Superior performance was also obtained compared to a High-Authority/Low-Authority (HAC/LAC) controller.

Voth, Christopher T.↗
DOE OSTI2021

NRC Multiphysics Analysis Capability Deployment FY21: Part 3

This report details the progress and activities of Idaho National Laboratory (INL) on the Nuclear Regulatory Commission (NRC) project “Development and Modeling Support for Advanced Non-Light Water Reactors.” The deliverables completed for this report are: Deliverable 1c: the capability to model gas mixtures was added to Pronghorn. A test problem mimicking the conditions achieved in a depressurized loss of forced cooling (DLOFC) event was solved with both RELAP-5 and Pronghorn. Pronghorn employed a finite vol ume method with the Kurganov-Tadmor discretization. The comparison between the mass fraction spatial profiles computed with RELAP-5 and Pronghorn clearly shows the presence of numerical artifacts (i.e., overly diffusive behavior at low Mach numbers). We confirmed that the problem disappears at higher Mach numbers. We recommend future work on the implementation of a low Mach finite volume formulation to better treat low Mach number problems. Deliverable 2a: we demonstrated two approaches to model the radiation/conduction/natural convection heat transfer across a stagnant gas for the PBMR-400 design using Pronghorn. The first approach is based on the net radiation method, which relies on the computation of view factors with the Multiphysics Object-Oriented Simulation Environment (MOOSE) ray tracing capability. The second method is a traditional thermal resistance approach. The test problems include both 2D and 3D geometries. In all cases, the results show very good agreement during a DLOFC transient. This confirms that the faster thermal resistance method produces solutions that are equivalent to the net radiation method for this geometry. Deliverable 3d: we demonstrated the use of the advection kernel for the delayed neutron precursor equation in Griffin with a 2D MSFR model. The results appear physical but further verification is recommended. We also recommend the addition of conjugate heat transfer to compute the temperatures and model the thermomechanic behavior of the reflectors and other structures. Significant memory and performance issues were encountered in the 3D axisymmetric model. Future work is recommended in this area. Task 8g: this task allows multidimensional MOOSE applications to be coupled to system codes (RELAP-7 and SAM). We implemented a faster multiphysics iteration coupling algorithm, which provides an overall 6× acceleration of the 3D-1D coupling of the core multidi- mensional fluid flow solver and the 1D primary and secondary loop model.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1998

Structure and Dynamics of Coronal Plasma

Brief summaries of the four published papers produced within the present performance period of NASA Grant NAGW-4081 are presented. The full text of the papers are appended to the report. The first paper titled "Coronal Structures Observed in X-rays and H-alpa Structures" was published in the Kofu Symposium proceedings. The study analyzes cool and hot behavior of two x-ray events, a small flare and a surge. It was found that a large H-alpha surge appears in x-rays as a very weak event, while a weak H-alpha feature corresponds to the brightest x-ray emission on the disk at the time of the observation. Calculations of the heating necessary to produce these signatures, and implications for the driving and heating mechanisms of flares vs. surges are presented. The second paper "Differential Magnetic Field Shear in an Active Region" has been published in The Astrophysical Journal. The study compared the three dimensional extrapolation of magnetic fields with the observed coronal structure in an active region. Based on the fit between observed coronal structure throughout the volume of the region and the calculated magnetic field configurations, the authors propose a differential magnetic field shear model for this active region. The decreasing field shear in the outer portions of the AR may indicate a continual relaxation of the magnetic field with time, corresponding to a net transport of helicity outward. The third paper "Difficulties in Observing Coronal Structure" has been published in the journal Solar Physics. This paper discusses the evidence that the temperature and density structure of the corona are far more complicated than had previously been thought. The discussion is based on five studies carried out by the group on coronal plasma properties, showing that any one x-ray instrument does see all of the plasma present in the corona, that hot and cool material may appear to be co-spatial at a given location in the corona, and that simple magnetic field extrapolations provide only a poor fit to the observed structure. The fourth paper "Analysis and Comparison of Loop Structures Imaged with NIXT and Yohkoh/SXT" has been published in Astronomy and Astrophysics. This paper analyzes and compares a variety of coronal loops, deriving loop pressure and emission measure from loop models. They are able to determine the volume filling factor in the corona, which is found to be in the range 0.001 to 0.01 for compact loops, and of order 1 for large structures. The small values suggest highly filamented structures, especially at lower temperatures.

Golub, Leon↗
NASA NTRS1981

Discovery of X-ray emission lines from the RS CVn binary sigma CrB

X-ray observations of the RS CVn binary sigma CrB were carried out with a solid state spectrometer on board the Einstein Observatory in 1979. X-ray emission lines due to Mg XI, Si XIII, S XV and a blend of L-transition lines due to Fe XVII and Fe XVIII were detected in the sigma CrB spectrum. The observed X-ray spectrum is described by a two-temperature coronal X-ray emission model: the dominant low temperature component originates in a plasma at a temperature of 5.9 + or 0.5 x 10 to the 6th K; the weaker higher temperature arises from a plasma of not less than 35 x 10 to the 6th K. Intensity variations over a period of a few hours are also recorded and thought to be due to a variation in the number of loops concentrated around active regions on the star surface. Implications of the results are discussed in terms of the constant-pressure coronal loop model (Rosner, Tucker, Vaiana, 1978).

Agrawal, P. C.↗
NASA NTRS1977

Structure and dynamics of a solar flare - X-ray and XUV observations

Results are presented for an analysis of X-ray and XUV emission from the solar flare that occurred on September 5, 1973. X-ray emission was monitored by ionization chambers aboard the Solrad 9 satellite, and the XUV emission in the wavelength range 170-345 A was recorded by a slitless objective-grating spectroheliograph on Skylab. The physical parameters of the flare plasma, including temperature, density, volume, and magnetic-field configuration, are evaluated. A geometrical loop model is used to determine the volumes of the various emitting regions. The structure of the flare in the rise and decay phases is examined in detail, and conclusions about the effect of various dynamic processes in the flare plasma are made. A major finding is that continued energy release is required well into the flare decay phase. In the rise phase, energy is apparently released only along a small portion of a loop, and in the decay phase apparently throughout most of its length.

Dere, K. P.↗
NASA NTRS2016

Data-Driven Radiative Hydrodynamic Modeling of the 2014 March 29 X1.0 Solar Flare

Spectroscopic observations of solar flares provide critical diagnostics of the physical conditions in the flaring atmosphere. Some key features in observed spectra have not yet been accounted for in existing flare models. Here we report a data-driven simulation of the well-observed X1.0 flare on 2014 March 29 that can reconcile some well-known spectral discrepancies. We analyzed spectra of the flaring region from the Interface Region Imaging Spectrograph (IRIS) in Mg II hk, the Interferometric BIdimensional Spectropolarimeter at the Dunn Solar Telescope (DSTIBIS) in H(alpha) 6563A and Ca II 8542A, and the Reuven Ramaty High Energy Solar Spectroscope Imager (RHESSI) in hard X-rays. We constructed a multithreaded flare loop model and used the electron flux inferred from RHESSI data as the input to the radiative hydrodynamic code RADYN to simulate the atmospheric response. We then synthesized various chromospheric emission lines and compared them with the IRIS and IBIS observations. In general, the synthetic intensities agree with the observed ones, especially near the northern footpoint of the flare. The simulated Mg II line profile has narrower wings than the observed one. This discrepancy can be reduced by using a higher microturbulent velocity (27 km/s) in a narrow chromospheric layer. In addition, we found that an increase of electron density in the upper chromosphere within a narrow height range of approx. 800 km below the transition region can turn the simulated Mg II line core into emission and thus reproduce the single peaked profile, which is a common feature in all IRIS flares.

Da Costa, Fatima Rubio↗
NASA NTRS1993

Features of a SINDA/FLUINT model of a liquid oxygen supply line

The modeling features used in a steady-state heat transfer problem using SINDA/FLUINT are described. The problem modeled is a 125 feet long, 3 inch diameter pipe, filled with liquid oxygen flow driven by a given pressure gradient. The pipe is fully insulated in five sections. Three sections of 1 inch thick spray-on foam and two sections of vacuum jacket. The model evaluates friction, turns losses and convection heat transfer between the fluid and the pipe wall. There is conduction through the foam insulation with temperature dependent thermal conductivity. The vacuum space is modeled with radiation and gas molecular conduction, if present, in the annular gap. Heat is transferred between the outer surface and surrounding ambient by natural convection and radiation; and, by axial conduction along the pipe and through the vacuum jacket spacers and welded seal flanges. The model makes extensive use of SINDA/FLUINT basic capabilities such as the GEN option for nodes and conductors (to generate groups of nodes or conductors), the SIV option (to generate single, temperature varying conductors), the SIM option (for multiple, temperature varying conductors) and the M HX macros for fluids (to generate strings of lumps, paths, and ties representing a diabatic duct). It calls subroutine CONTRN (returns the relative location in the G-array of a network conductor, given an actual conductor number) enabling an extensive manipulation of conductor (calculates an assignment of their values) with DO loops. Models like this illustrate to the new and even to the old SINDA/FLUINT user, features of the program that are not so obvious or known, and that are extremely handy when trying to take advantage of both, the automation of the DATA headers and make surgical modifications to specific parameters of the thermal or fluid elements in the OPERATIONS portion of the model.

Simmonds, Boris G.↗
NASA NTRS2001

Geoscience Laser Altimeter System (GLAS) Instrument: Flight Loop Heat Pipe (LHP) Acceptance Thermal Vacuum Test

Two loop heat pipes (LHPs) are to be used for tight thermal control of the Geoscience Laser Altimeter System (GLAS) instrument, planned for flight in late 2001. The LHPs are charged with Propylene as a working fluid. One LHP will be used to transport 110 W from a laser to a radiator, the other will transport 160 W from electronic boxes to a separate radiator. The application includes a large amount of thermal mass in each LHP system and low initial startup powers. The initial design had some non-ideal flight design compromises, resulted in a less than ideal charge level for this design concept with a symmetrical secondary wick. This less than ideal charge was identified as the source of inadequate performance of the flight LHPs during the flight thermal vacuum test in October of 2000. We modified the compensation chamber design, re-built and charged the LHPs for a final LHP acceptance thermal vacuum test. This test performed March of 2001 was 100% successful. This is the last testing to be performed on the LHPs prior to instrument thermal vacuum test. This sensitivity to charge level was shown through varying the charge on a Development Model Loop Heat Pipe (DM LHP) and evaluating performance at various fill levels. At lower fills similar to the original charge in the flight units, the same poor performance was observed. When the flight units were re-designed and filled to the levels similar to the initial successful DM LHP test, the flight units also successfully fulfilled all requirements. This final flight Acceptance test assessed performance with respect to startup, low power operation, conductance, and control heater power, and steady state control. The results of the testing showed that both LHPs operated within specification. Startup on one of the LHPs was better than the other LHP because of the starter heater placement and a difference in evaporator design. These differences resulted in a variation in the achieved superheat prior to startup. The LHP with the lower superheat was sensitive to the thermal environment around the compensation chamber, while the LHP with the higher superheat (similar in design to DM LHP) was not. In response to the test results the placement of the starter heater will be optimized for the flight instrument testing for higher achieved superheat. This presentation discusses startup behavior, overall conductance of a radiator system, low power operation, high power operation, temperature control stability, and control heater power requirements as measured during this acceptance thermal vacuum test. A brief summary of 'lessons learned' will be included.

Baker, Charles↗
DOE OSTI2022

CLARIFYING THE NEXUS BETWEEN LIFE CYCLE ASSESSMENT AND CIRCULARITY INDICATORS: A SETAC/ACLCA INTEREST GROUP

Purpose Improving the circularity of resources is important to the sustainability of consumer goods. Current research has indicated that circularity practices and circular economy (CE) methods do not always reduce environmental impacts. The aim of this research is to investigate the adoption of the life cycle assessment (LCA) methodology to improve the environmental impacts of circularity practices. Methods As part of the Society for Environmental Toxicology And Chemistry (SETAC) forum, an interest group (IG) on Circularity and LCA was formed in partnership with the American Center for Life Cycle Assessment (ACLCA) to tackle methodological and technical issues related to circularity in LCA. The IG’s research approach is summarized in four key steps: defining goals and objectives, literature review and gap analysis, ideation, and experimentation. The twelve active persons within this IG meet monthly and have been divided into four sub-working groups (sub-WGs) so that complementary tasks can be completed concurrently in an effective manner. Each sub-WG meets monthly and reports back to the main group for collaboration and brainstorming to meet the research objectives. Results and discussion First, the sub-WG #1, focusing on the “pool of circularity and LCA-based indicators”, analyzed the complementarity between two of the most used circularity indicators and LCA. Second, the sub-WG #2, working on the “evaluation of CE loops performance through LCA”, built a mind map of pain points that reflect the challenges that the LCA practitioners face when combining LCA with CE approaches. Third, the sub-WG #3, dealing with the “trade-offs between circularity and sustainability”, highlighted key alignments and/or conflicts between circularity and sustainability performance depending on the scope, product, industry, or system of analysis. Fourth, the sub-WG #4, focusing on “business and industrial cases”, plans to leverage the knowledge base developed within this IG to develop use cases documenting the benefits and challenges associated with CE-related loops modeling in LCA. Conclusions The first findings of this SETAC/ACLCA IG provide a state-of-the-art overview of the synergists of LCA methodology and the CE measurement frameworks reported in the literature. To move forward and capitalize on the first findings, one valuable point will be to discuss and provide concrete solutions to the pain points that emerged when considering circularity in LCA. Eventually, the knowledge base and resources created within this IG ultimately aim to support the proper application of LCA for practitioners in CE contexts, and could provide relevant inputs for the ISO Technical Committee ISO/TC 323 working on the upcoming standard for the measurement of CE performance.

Life cycle assessment, circular economy, circulari↗
NASA NTRS1973

A Computer Model of a Phase Lock Loop

A computer model is reported of a PLL (phase-lock loop), preceded by a bandpass filter, which is valid when the bandwidth of the bandpass filter is of the same order of magnitude as the natural frequency of the PLL. New results for the PLL natural frequency equal to the bandpass filter bandwidth are presented for a second order PLL operating with carrier plus noise as the input. However, it is shown that extensions to higher order loops, and to the case of a modulated carrier are straightforward. The new results presented give the cycle skipping rate of the PLL as a function of the input carrier to noise ratio when the PLL natural frequency is equal to the bandpass filter bandwidth. Preliminary results showing the variation of the output noise power and cycle skipping rates of the PLL as a function of the loop damping ratio for the PLL natural frequency equal to the bandpass filter bandwidth are also included.

Shelton, Ralph Paul↗
DOE OSTI2022

Do chaotic field lines cause fast reconnection in coronal loops?

Over the past decade, Boozer has argued that three-dimensional (3D) magnetic reconnection fundamentally differs from two-dimensional reconnection due to the fact that the separation between any pair of neighboring field lines almost always increases exponentially over distance in a 3D magnetic field. According to Boozer, this feature makes 3D field-line mapping chaotic and exponentially sensitive to small non-ideal effects; consequently, 3D reconnection can occur without intense current sheets. We test Boozer's theory via ideal and resistive reduced magnetohydrodynamic simulations of the Boozer–Elder coronal loop model driven by sub-Alfvénic footpoint motions [A. H. Boozer and T. Elder, Phys. Plasmas 28, 062303 (2021)]. In this work, our simulation results significantly differ from their predictions. The ideal simulation shows that Boozer and Elder under-predict the intensity of current density due to missing terms in their reduced model equations. Furthermore, resistive simulations of varying Lundquist numbers show that the maximal current density scales linearly rather than logarithmically with the Lundquist number.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Measurement of the Higgs boson mass and width using the four-lepton final state in proton-proton collisions at $\sqrt{s}$ =13 TeV

A measurement of the Higgs boson mass and width via its decay to two 𝑍 bosons is presented. Proton-proton collision data collected by the CMS experiment, corresponding to an integrated luminosity of 138 fb −1 at a center-of-mass energy of 13 TeV, is used. The invariant mass distribution of four leptons in the on-shell Higgs boson decay is used to measure its mass and constrain its width. This yields the most precise single measurement of the Higgs boson mass to date, 125.04 ± 0.12 GeV, and an upper limit on the width Γ 𝐻 < 330 MeV at 95% confidence level. A combination of the on- and off-shell Higgs boson production decaying to four leptons is used to determine the Higgs boson width, assuming that no new virtual particles affect the production, a premise that is tested by adding new heavy particles in the gluon fusion loop model. This result is combined with a previous CMS analysis of the off-shell Higgs boson production with decay to two leptons and two neutrinos, giving a measured Higgs boson width of 3.0$^{+2.0}_{−1.5}$ MeV, in agreement with the standard model prediction of 4.1 MeV. The strength of the off-shell Higgs boson production is also reported. The scenario of no off-shell Higgs boson production is excluded at a confidence level corresponding to 3.8 standard deviations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Power-Law Entanglement and Hilbert Space Fragmentation in Nonreciprocal Quantum Circuits

Quantum circuits utilizing measurement to evolve a quantum wave function offer a new and rich playground to engineer unconventional entanglement dynamics. Here, in this work, we introduce a hybrid, nonreciprocal setup featuring a quantum circuit, whose updates are conditioned on the state of a classical dynamical agent. In our example the circuit is represented by a Majorana quantum chain controlled by a classical N-state Potts chain undergoing pair flips. The local orientation of the classical spins controls whether randomly drawn local measurements on the quantum chain are allowed or not. This imposes a dynamical kinetic constraint on the entanglement growth, described by the transfer matrix of an N-colored loop model. It yields an equivalent description of the circuit by an SU(N)-symmetric Temperley-Lieb Hamiltonian or by a kinetically constrained surface growth model for an N-component height field. For N = 2, we find a diffusive growth of the half-chain entanglement toward a stationary profile S(L) ~ L 1/2 for L sites. For N ≥ 3, the kinetic constraints impose Hilbert space fragmentation, yielding subdiffusive growth toward S(L) ~ L 0.57 . This showcases how the control by a classical dynamical agent can enrich the entanglement dynamics in quantum circuits, paving a route toward novel entanglement dynamics in nonreciprocal hybrid circuit architectures.

1-dimensional spin chains↗
NASA NTRS1976

Evaporative cooling of flare plasma

A one-dimensional loop model for the evaporative cooling of the coronal flare plasma was investigated. Conductive losses dominated radiative cooling, and the evaporative velocities were small compared to the sound speed. The profile and evolution of the temperature were calculated. The model was in agreement with soft X-ray observations on the evolution of flare temperatures and emission measures. The effect of evaporation was to greatly reduce the conductive heat flux into the chromosphere and to enhance the EUV emission from the coronal flare plasma.

Antiochos, S. K.↗
NASA NTRS1978

Evaporative cooling of flare plasma

We investigate a one-dimensional loop model for the evaporative cooling of the coronal flare plasma. The important assumptions are that conductive losses dominate radiative cooling and that the evaporative velocities are small compared with the sound speed. We calculate the profile and evolution of the temperature and verify the accuracy of our assumptions for plasma parameters typical of flare regions. The model is in agreement with soft X-ray observations on the evolution of flare temperatures and emission measures. The effect of evaporation is to greatly reduce the conductive heat flux into the chromosphere and to enhance the EUV emission from the coronal flare plasma.

Antiochos, S. K.↗
NASA NTRS1978

The thermal phase of a large solar flare

EUV and X-ray observations are used to derive the differential emission measures, temperatures, densities, radiative and conductive cooling rates, and thermal energy content of a class 2B flare that occurred on September 7, 1973. The results of the analysis indicate that (1) most of the flare plasma was at temperatures between 3 and 10 million degrees; (2) the peak temperature decreased with time from about 8 million K to 5 million K over a period of 3.5 hours; (3) the differential emission measure steadily decreased with time at nearly all temperatures; (4) both radiation and conduction were important cooling mechanisms for the plasma at temperatures above 100,000 K; and (5) a substantial amount of energy, of the order of 3 x 10 to the 31st power ergs, was deposited in the flare loops after flare maximum. The empirically determined flare parameters are compared with similar parameters derived from a simple theoretical loop model.

Withbroe, G. L.↗