Search NASA⌕ Search

SEARCH · Search NASA

Results for “molecular driving forces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Positional ordering induced by dynamic steric interactions in superparamagnetic rods

The dynamic motion produced by precessing magnetic fields can drive matter into far-from-equilibrium states. We predict 1D periodic ordering in systems of precessing rods when magnetic interactions between rods remain insignificant. The precession angle of the rods is completely determined by the field's precession angle and the ratio of the field's precession frequency and the characteristic response frequency of the rods. Here, we develop a molecular dynamics model that explicitly calculates magnetic interactions between particles, and we also simulate rods in the limit of a strong and fast precessing magnetic field where inter-rod magnetic interactions are negligible, using a purely steric model. Our simulations show how steric interactions drive the rods from a positionally disordered phase (nematic) to a layered (smectic) phase. As the rod precession angle increases, the nematic–smectic transition density significantly decreases. The minimization of unfavorable steric interactions also induces phase separation in binary mixtures of rods of different lengths. This effect is general to any force that produces precession in elongated particles. This work will advance the understanding and control of out-of-equilibrium soft matter systems.

42 ENGINEERING↗
DOE OSTI2025

Superstructural phase transitions in polymer-grafted nanooctahedra

Superlattices of polyhedral nanocrystals exhibit emergent properties defined by their structural arrangements, but native nanocrystal ligands often limit their programmability. Polymeric ligands address this limitation by enabling tunable nanocrystal softness through modifications of polymer molecular weight and grafting density. Here, we investigate phase transitions in polymer-grafted nanooctahedra by varying polymer length, nanocrystal size, truncation, and ligand density. In two-dimensional superlattices, longer polymers or smaller nanooctahedra induce a transition from orientationally ordered to hexagonal rotator lattices. In three-dimensional superlattices, increasing polymer length drives transitions from Minkowski to body-centered cubic and plastic hexagonal close-packed phases, while higher grafting densities further enable transitions to simple hexagonal phases. Polymer brush and thermodynamic perturbation theories, supported by Monte Carlo simulations, uncover the entropic and enthalpic forces that govern these transitions. This work highlights the versatility of polymer-grafted anisotropic nanocrystals as building blocks for designing hierarchical superstructures and metamaterials with customizable properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Charged Biological Membranes Repel Large Neutral Molecules by Surface Dielectrophoresis and Counterion Pressure

Macromolecular crowding is the usual condition of cells. The implications of the crowded cellular environment for protein stability and folding, protein–protein interactions, and intracellular transport drive a growing interest in quantifying the effects of crowding. While the properties of crowded solutions have been extensively studied, less attention has been paid to the interaction of crowders with the cellular boundaries, i.e., membranes. However, membranes are key components of cells and most subcellular organelles, playing a central role in regulating protein channel and receptor functions by recruiting and binding charged and neutral solutes. While membrane interactions with charged solutes are dominated by electrostatic forces, here we show that significant charge-induced forces also exist between membranes and neutral solutes. Using neutron reflectometry measurements and molecular dynamics simulations of poly(ethylene glycol) (PEG) polymers of different molecular weights near charged and neutral membranes, we demonstrate the roles of surface dielectrophoresis and counterion pressure in repelling PEG from charged membrane surfaces. The resulting depletion zone is expected to have consequences for drug design and delivery, the activity of proteins near membrane surfaces, and the transport of small molecules along the membrane surface.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1984

Energetics of the protonation of CO - Implications for the observation of HOC(+) in dense interstellar clouds

A number of molecular species on the H3CO(+) energy hypersurface is examined. Ab initio molecular orbital theory is used to determine the structures and relative energetics of the two isomers of HCO(+) and HOC(+) together with the affinity of CO for protonation at either end. The proton affinities of H2 and H2CO are also examined. The calculations are performed using large basis sets and include the effects of electron correlation. The calculated vibrational frequencies are used to correct for zero point energy differences. The results show that the proton affinities of H2 and CO to form HOC(+) are within 1 kcal of each other. The calculations demonstrate that there is no thermodynamic driving force to form HOC(+) in collisions of H3(+) with CO, and that the formation of HCO(+) in such collisions is very exoergic. A plausible mechanism is suggested to explain the differences observed between the laboratory and the interstellar medium.

Dixon, D.↗
DOE OSTI2022

Determining critical overlap concentration of polyethylene oxide to support excipient safety assessment of opioid products

Intravenous administration of abuse-deterrent opioid products poses high safety risks, in part due to the presence of high molecular weight polymeric excipients. Previous in vivo studies in animal models have shown that the higher molecular weight (Mw) polymeric excipients like polyethylene oxide (PEO) were directly linked to such adverse responses as intravenous hemolysis and kidney damage. PEO polymers have been widely used in abuse-deterrent formulations (ADF) of opioid products, adding to concerns over the general safety of the opioid category due to the unknown safety risk from abuse via unintended routes. Here, the current study focused on the determination of the critical overlap concentration (c*) at various PEO molecular weights to aid in explaining differences in observed adverse responses from previous animal studies on the intravenous administration of PEO solutions. Adverse in vivo responses may be related to the viscoelastic regime of the polymer solution, which depends not only on Mw but also on concentration. Having a localized polymer concentration in the blood above the c*, i.e., the transition from the dilute to semi-dilute entangled viscoelastic regime, may influence the flow behavior and interactions of cells in the blood. The relationship of c* to this combination of physical, chemical, and rheological effects is a possible driving force behind adverse in vivo responses.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Charge state-dependent ion condensation near conjugated polymer backbones

Despite the technological appeal of polymeric organic mixed ionic/electronic conductors (OMIECs) for diverse applications, a deep understanding of the fundamentals of mixed charge transport in these materials, especially regarding the complex interplay between polymer, ion and solvent structure in determining transport, is lacking. Herein, extensive molecular dynamics (MD) simulations of a model OMIEC representing various electrochemically gated states are reported that reveal charge state-dependent counterion condensation. X-ray diffraction simulations based on the MD data predict a measurable change in the scattering intensity at the counterion absorption edge, indicative of counterion repositioning with charging. We leverage an operando resonant X-ray scattering technique to experimentally corroborate the simulated scattering and report excellent agreement between predicted and experimental data, confirming that counterions preferentially reside in the lamellar mid-plane of crystallites at low doping, and near the polymer backbone at higher doping. Driving forces for ion type-dependent spatial repositioning and implications thereof are discussed.

36 MATERIALS SCIENCE↗
NASA NTRS2009

Circuits Enhance Scientific Instruments and Safety Devices

Since its founding in 1958, NASA has pioneered the use of different frequencies on the electromagnetic spectrum - including X-ray, microwave, and infrared wavelengths - to gather information about distant celestial bodies. During the 1962 Mariner 2 mission, NASA used microwave radiometers that operated in the range of 15-23 gigahertz (GHz) to assess the surface temperature of Venus and to determine the percentage of water vapor in its atmosphere. Today, there is another area on the spectrum proving uniquely useful to scientists: the terahertz (THz) range, spanning from about 100 GHz-10,000 GHz. (1 THz equals approximately 1,000 GHz.) Terahertz frequencies span the lesser-known gap on the electromagnetic spectrum between microwave radiation and infrared (and visible) light, falling within the spectral range where most simple molecules resonate. This molecular resonance makes terahertz particularly useful for chemical spectroscopy and the remote sensing of specific molecules. In the 1990s, NASA began using frequencies above 300 GHz (more than an order of magnitude higher than the instrumentation on Mariner 2) to perform spectral analysis of molecular clouds and planetary atmospheres. Instruments using these higher frequencies have included the Microwave Limb Sounder (MLS) on the Upper Atmosphere Research Satellite (UARS), deployed from 1991-2001, and the Microwave Instrument for the Rosetta Orbiter (MIRO), launched in 2004. With UARS-MLS, NASA used advanced terahertz receivers to measure the emission signatures from atmospheric molecules, providing researchers with valuable data about the changes in the Earth s protective ozone layer. MIRO, set to rendezvous with the comet 67P Churyumov-Gerasimenko in 2014, will use terahertz instrumentation to analyze the comet s dust and gases. Although NASA has been a driving force behind the development of terahertz technology, scientific equipment for terahertz research - including transmitters, receivers, and basic test and measurement equipment - is not widely available, making scientific experiments in this range between traditional electronics and quantum photonics more costly and greatly limiting commercial development in the field. Given NASA s interest in studying distant bodies in space as well as in improving life on Earth, the Agency has collaborated with private industry to develop terahertz technologies.

Source record↗
NASA NTRS2024

Molecular Dynamics Simulations of Microstructural Effects on Austenite-Martensite Interfaces in NiTi

Formation and migration of austenite-martensite interfaces plays the key role in reversible martensitic transformations of shape memory alloys (SMAs). How these interfaces interact with the SMA microstructure is a primary determining factor in important functional properties such as hysteresis and transformation span. As such, successful microstructural engineering of SMAs requires in-depth knowledge of interface behavior. The rapid nature of martensitic transformations makes experimental observations of moving austenite-martensite interfaces challenging. Molecular dynamics (MD) simulation is a unique tool which can probe the atomic-scale details of austenite-martensite interfaces as they migrate through different microstructures. However, in focusing on the entire transformation process, including the nucleation of new phases, MD studies are usually performed so far from equilibrium that their relevance to experiment is questionable. Here, we demonstrate new MD techniques to generate energetically preferred austenite-martensite interfaces in NiTi under near-equilibrium conditions. The interfaces are semi-coherent, exhibiting a series of structural disconnections, and they can migrate rapidly through single crystals under only small thermodynamic driving forces. In contrast, when interfaces migrate in polycrystals, their motion is impeded by thermoelastic effects as well as changes in orientation relationships at grain boundaries. Microstructures which accumulate large amounts of elastic energy tend to release some fraction through irreversible, hysteresis-inducing mechanisms. We demonstrate that engineering microstructures with less constraints is a viable strategy to produce SMAs with reduced hysteresis and transformation span. Similar thermoelastic and hysteresis-inducing mechanisms also arise when austenite-martensite interfaces encounter precipitates and can be controlled by tuning characteristics of the precipitate distribution.

Gabriel Plummer↗
NASA NTRSDate not supplied

Molecular Dynamics Simulations of Microstructural Effects on Austenite-Martensite Interfaces in NiTi

The formation and migration of austenite-martensite interfaces plays the key role in reversible martensitic transformations of shape memory alloys (SMAs). How these interfaces interact with the SMA microstructure is a primary determining factor in important functional properties such as hysteresis and transformation span. As such, successful microstructural engineering of SMAs requires in-depth knowledge of interface behavior. The rapid nature of martensitic transformations makes experimental observations of moving austenite-martensite interfaces challenging. Molecular dynamics (MD) simulation is a unique tool which can probe the atomic-scale details of austenite-martensite interfaces as they migrate through different microstructures. However, in focusing on the entire transformation process, including the nucleation of new phases, MD studies are usually performed so far from equilibrium that their relevance to experiment is questionable. Here, we demonstrate new MD techniques to generate energetically preferred austenite-martensite interfaces in NiTi under near-equilibrium conditions. The interfaces are semi-coherent, exhibiting a series of structural disconnections, and they can migrate rapidly through single crystals under only small thermodynamic driving forces. In contrast, when interfaces migrate in polycrystals, their motion is impeded by thermoelastic effects as well as changes in orientation relationships at grain boundaries. Microstructures which accumulate large amounts of elastic energy tend to release some fraction through irreversible, hysteresis-inducing mechanisms. We demonstrate that engineering microstructures with less constraints is a viable strategy to produce SMAs with reduced hysteresis and transformation span. Similar thermoelastic and hysteresis-inducing mechanisms also arise when austenite-martensite interfaces encounter precipitates and can be controlled by tuning characteristics of the precipitate distribution.

Gabriel Plummer↗
NASA NTRSDate not supplied

Molecular Dynamics Simulations of Microstructural Effects on Austenite-Martensite Interfaces in NiTi

Formation and migration of austenite-martensite interfaces plays the key role in reversible martensitic transformations of shape memory alloys (SMAs). How these interfaces interact with the SMA microstructure is a primary determining factor in important functional properties such as hysteresis and transformation span. As such, successful microstructural engineering of SMAs requires in-depth knowledge of interface behavior. The rapid nature of martensitic transformations makes experimental observations of moving austenite-martensite interfaces challenging. Molecular dynamics (MD) simulation is a unique tool which can probe the atomic-scale details of austenite-martensite interfaces as they migrate through different microstructures. However, in focusing on the entire transformation process, including the nucleation of new phases, MD studies are usually performed so far from equilibrium that their relevance to experiment is questionable. Here, we demonstrate new MD techniques to generate energetically preferred austenite-martensite interfaces in NiTi under near-equilibrium conditions. The interfaces are semi-coherent, exhibiting a series of structural disconnections, and they can migrate rapidly through single crystals under only small thermodynamic driving forces. In contrast, when interfaces migrate in polycrystals, their motion is impeded by thermoelastic effects as well as changes in orientation relationships at grain boundaries. Microstructures which accumulate large amounts of elastic energy tend to release some fraction through irreversible, hysteresis-inducing mechanisms. We demonstrate that engineering microstructures with less constraints is a viable strategy to produce SMAs with reduced hysteresis and transformation span. Similar thermoelastic and hysteresis-inducing mechanisms also arise when austenite-martensite interfaces encounter precipitates and can be controlled by tuning characteristics of the precipitate distribution.

Gabriel Plummer↗
DOE OSTI2025

Mechanisms of direct and converse piezoelectricity in ferroelectric polymers

Within the linear regime of mechanical and electrical responses, it is commonly accepted that direct and converse piezoelectric coefficients should be the same. However, we observed a consistently higher converse d 31 (∼54 pm/V) than the direct d 31 (∼42 pC/N) for a quenched, stretched, annealed, and electrically poled poly(vinylidene fluoride-co-trifluorethylene) [P(VDF-TrFE)] 52/48 mol.% sample (abbreviated as coP-52/48QSAP). On the contrary, the direct and converse d 31 values were the same for coP-65/35QSAP and coP-55/45QSAP. Small-angle X-ray scattering results showed that coP-52/48QSAP had a higher amount of relaxor-like secondary crystals (SCs) in the oriented amorphous fraction (OAF) (SC OAF ) than coP-55/45QSAP and coP-65/35QSAP. To explain the experimental observation, we performed molecular dynamics (MD) simulation of the pure PVDF (without TrFE) to estimate direct and converse piezoelectricity for the PVDF OAF. Based on the MD simulation, the direct d 31 had a plateau value around 350 pC/N for the transverse (i.e., along the chain direction) strain up to 1 %, whereas the simulated converse d 31 could be lower (for electric field E < 0.8 MV/m), equal (for E = 0.8 MV/m), or higher (for E > 0.8 MV/m) than the direct d 31 , depending on the poling electric field. From the MD simulation, both mechano-electrostriction and electrostatic interaction were identified in the OAF as the driving force for enhanced piezoelectricity in ferroelectric PVDF. In conclusion, when ferroelectric domains were formed in the OAF by electric poling, the simulated converse d 31 became higher than the direct d 31 . Combining both experimental and MD simulation results, the higher converse d 31 than direct d 31 for coP-52/48QSAP was understood qualitatively.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Hydration-Controlled Proton Transport in Respiratory Complex I

Proton pumping by respiratory complex I is one essential element for generating the proton motive force that drives ATP synthesis in mitochondria. Although it is understood that electrons from NADH reduce ubiquinone at the peripheral arm and that four protons are transferred in the membrane domain, the mechanism by which this redox reaction initiates proton translocation remains unclear. A lateral pathway linking the quinone binding site to the membrane domain via ND1, ND3, and ND4L subunits has been proposed as a possible initial path of an excess proton. However, experimental structures indicate that the hydration connectivity between D66 ND3 and E34 ND4L is comparatively weaker than in neighboring segments, suggesting a potential regulatory point for proton transfer. Using multiscale reactive molecular dynamics (MS-RMD) and a water wire connectivity metric, we directly simulate proton transport through this region as coupled to the hydration by water molecules. Our results reveal that proton transfer is thermodynamically feasible when transient hydration aligns with the presence of an excess proton, revealing the strong coupling between hydration and proton transfer (PT) in this region of Complex I. These findings support a model where proton injection enhances local hydration, dynamically opening the pathway for proton transfer and regulating the onset of proton pumping in Complex I.

Chemical structure↗
DOE OSTI2022

Dynamic signatures of electronically nonadiabatic coupling in sodium hydride: a rigorous test for the symmetric quasi-classical model applied to realistic, ab initio electronic states in the adiabatic representation

Sodium hydride (NaH) in the gas phase presents a seemingly simple electronic structure making it a potentially tractable system for the detailed investigation of nonadiabatic molecular dynamics from both computational and experimental standpoints. The single vibrational degree of freedom, as well as the strong nonadiabatic coupling that arises from the excited electronic states taking on considerable ionic character, provides a realistic chemical system to test the accuracy of quasi-classical methods to model population dynamics where the results are directly comparable against quantum mechanical benchmarks. Here, using a simulated pump–probe type experiment, this work presents computational predictions of population transfer through the avoided crossings of NaH via symmetric quasi-classical Meyer–Miller (SQC/MM), Ehrenfest, and exact quantum dynamics on realistic, ab initio potential energy surfaces. The main driving force for population transfer arises from the ground vibrational level of the D 1 Σ + adiabatic state that is embedded in the manifold of near-dissociation C 1 Σ + vibrational states. When coupled through a sharply localized first-order derivative coupling most of the population transfers between t = 15 and t = 30 fs depending on the initially excited vibronic wavepacket. While quantum mechanical effects are expected due to the reduced mass of NaH, predictions of the population dynamics from both the SQC/MM and Ehrenfest models perform remarkably well against the quantum dynamics benchmark. Additionally, an analysis of the vibronic structure in the nonadiabatically coupled regime is presented using a variational eigensolver methodology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2002

Dynamical Studies of the Middle Atmosphere Using High Resolution Doppler Imager Observations

This report summarizes the activities of NASA grant NAG5-11068, "Dynamicai Studies of the Middle Atmosphere Using High Resolution Doppler Imager Observations." The High Resolution Doppler Imager (HRDI) on the Upper Atmosphere Research Satellite (UARS) has been providing direct measurements of the Earth's horizontal wind field in the stratosphere, mesosphere and lower thermosphere. Mesospheric temperatures, ozone, and O((sup 1) D) densities, and stratospheric aerosol extinctions coefficients, are also retrieved. The goal of HRDI is to measure the vector winds in the stratosphere (10-40 km), mesosphere, and lower thermosphere (approximately 50-120 km) during the day, and the lower thermosphere at night (approximately 95 km) to an accuracy of 5 m/s. The horizontal wind vector is measured by observing the Doppler shift of rotational lines of molecular oxygen along two lines of sight. In addition to winds, temperatures and volume emission rates are determined in the mesosphere and lower thermosphere, from which ozone and O((sup 1) D) concentrations can be derived, and aerosol scattering coefficients are determined in the stratosphere. UARS was launched on September 12, 1991, into a 585-km circular orbit inclined 57 degrees to the equator HRDI was activated September 28, 1991 and following a period of checkout and adjustment of the instrument parameters, scientific observations began November 2, 199 1. HRDI operated nearly continuously from launch until April 1995. At that time the UARS solar array drive failed, forcing the instruments to time-share the available power. From July 1995 to July 1996 HRDI operated approximately 50% of the time. At that point, one of the three spacecraft batteries failed and from then until September 1998 the duty cycle was less than 20% per month, At that time it was determined that HRDI could operate during each daytime pass, which increased the daytime duty cycle to close to l00%, while nighttime operations were limited to about a week per month. In the fall of 1999, the second tape recorder failed requiring a real time contact with a TRDSS satellite to retrieve that data. This resulted in about 60% data collection efficiency. Finally, in the summer of 2000, the second star sensor failed requiring the spacecraft attitude to be controlled by a three axis magnetometer and sun sensor. This resulted in a loss of attitude knowledge but operations continue with the anticipation of correcting the attitude. A new method for determining the tide and mean structure from satellite data in conjunction with a new tidal model has been devised. For brevity, it shall be referred to as the TMAT or Tide-Mean Assimilation Technique. Most previous methods of tidal analysis are based on various ways of slicing the data set.

Skinner, Wilbert↗
DOE OSTI2024

Novel microbial based enzymatic CO2 fixation mechanisms: Conformational control of enzymatic reactivity

The broad, long-term goal of the research is to provide insight into the mechanism of novel carboxylation and electron bifurcation reactions as paradigms to study how enzyme utilized protein conformational change to protect reactive intermediates and/or control the pathway in a catalytic cycle. catalyzed by enzymes involved in bacterial alkene, ketone, and epoxide metabolism. We are examining two paradigms in which conformational change is a key mechanistic feature of 1) protecting reaction intermediates that are sensitive to breakdown in the presence of water and 2) directing electron flow in reactions that split electron pairs along two pathways in reactions that fine tune metabolic efficiency in microbial metabolism. Both paradigms are of key importance in defining the molecular determinants of reactions relevant to CO 2 capture and fuel upcycling. In the first paradigm the compounds acetone and bicarbonate are activated by the addition of phosphate creating reaction intermediates (phosphoenolacetone and carboxyphosphate) that are very sensitive to breakdown in the presence of water. We are studying the mechanism of how the enzyme protects these reactive intermediates from water by encapsulating them upon their formation within a hydrophobic protein channel leading to an enzyme active site approximately 40 Å away. In the second paradigm, we are examining how the direction of electron transfer reactions can be modulated through protein conformational change that alters either the difference driving force or distance or both between electron transfer pathways in enzymes that catalyze electron bifurcation. We are using a combination of enzyme kinetics, mass spectrometry, spectroscopy, and structural analysis through X-ray diffraction and scattering methods to characterize the mechanism of conformational changes along the catalytic path. Within the context of the mission of the Department of Energy and the core activities of the Energy Biosciences, the results obtained in the study will reveal new insights into the fundamentals of novel carboxylation / CO 2 capture chemical transformations and electron transfer reactions that equate to biological fuel upcycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1998

Envelope structure on 700 AU scales and the molecular outflows of low-mass young stellar objects

Aperture synthesis observations of HCO+ J = 1-0, 13CO 1-0, and C18O 1-0 obtained with the Owens Valley Millimeter Array are used to probe the small-scale (5" approximately 700 AU) structure of the molecular envelopes of a well-defined sample of nine embedded low-mass young stellar objects in Taurus. The interferometer results can be understood in terms of: (1) a core of radius approximately or less than 1000 AU surrounding the central star, possibly flattened and rotating; (2) condensations scattered throughout the envelope that may be left over from the inhomogeneous structure of the original cloud core or that may have grown during collapse; and (3) material within the outflow or along the walls of the outflow cavity. Masses of the central cores are 0.001-0.1 M (solar), and agree well with dust continuum measurements. Averaged over the central 20" (3000 AU) region, an HCO+ abundance of 4 x 10(-8) is inferred, with a spread of a factor of 3 between the different sources. Reanalysis of previously presented single-dish data yields an HCO+ abundance of (5.0 +/- 1.7) x 10(-9), which may indicate an average increase by a factor of a few on the smaller scales sampled by the interferometer. Part of this apparent abundance variation could be explained by contributions from extended cloud emission to the single-dish C18O lines, and uncertainties in the assumed excitation temperatures and opacities. The properties of the molecular envelopes and outflows are further investigated through single-dish observations of 12CO J = 6-5, 4-3, and 3-2, 13CO 6-5 and 3-2, and C18O 3-2 and 2-1, obtained with the James Clerk Maxwell and IRAM 30 m telescopes, along with the Caltech Submillimeter Observatory. Ratios of the mid-J CO lines are used to estimate the excitation temperature, with values of 25-80 K derived for the gas near line centre. The outflow wings show a similar range, although Tex is enhanced by a factor of 2-3 in at least two sources. In contrast to the well-studied L1551 IRS 5 outflow, which extends over 10' (0.4 pc), seven of the remaining eight sources are found to drive 12CO 3-2 outflows over < or = 1' (0.04 pc); only L1527 IRS has a well-developed outflow of some 3'(0.12 pc). Estimates are obtained for the outflow kinetic luminosity, Lkin, and the flow momentum rate, FCO, applying corrections for line opacity and source inclination. The flow force FCO correlates with the envelope mass and with the 2.7 mm flux of the circumstellar disk. Only a weak correlation is seen with Lbol, while none is found with the relative age of the object as measured by integral Tmb(HCO+ 3-2)dV/Lbol. These trends support the hypothesis that outflows are driven by accretion through a disk, with a global mass infall rate determined by the mass and density of the envelope. The association of compact HCO+ emission with the walls of the outflow cavities indicates that outflows in turn influence the appearance of the envelopes. It is not yet clear, however, whether they are actively involved in sweeping up envelope material, or merely provide a low-opacity pathway for heating radiation to reach into the envelope.

NASA Discipline Exobiology↗
DOE OSTI2021

Kinetics of solid–liquid interface motion in molecular dynamics and phase-field models: crystallization of chromium and silicon

The results of molecular dynamics (MD) simulations of the crystallization process in one-component materials and solid solution alloys reveal a complex temperature dependence of the velocity of the crystal–liquid interface featuring an increase up to a maximum at 10–30% undercooling below the equilibrium melting temperature followed by a gradual decrease of the velocity at deeper levels of undercooling. At the qualitative level, such non-monotonous behaviour of the crystallization front velocity is consistent with the diffusion-controlled crystallization process described by the Wilson–Frenkel model, where the almost linear increase of the interface velocity in the vicinity of melting temperature is defined by the growth of the thermodynamic driving force for the phase transformation, while the decrease in atomic mobility with further increase of the undercooling drives the velocity through the maximum and into a gradual decrease at lower temperatures. At the quantitative level, however, the diffusional model fails to describe the results of MD simulations in the whole range of temperatures with a single set of parameters for some of the model materials. The limited ability of the existing theoretical models to adequately describe the MD results is illustrated in the present work for two materials, chromium and silicon. It is also demonstrated that the MD results can be well described by the solution following from the hodograph equation, previously found from the kinetic phase-field model (kinetic PFM) in the sharp interface limit. The ability of the hodograph equation to describe the predictions of MD simulation in the whole range of temperatures is related to the introduction of slow (phase field) and fast (gradient flow) variables into the original kinetic PFM from which the hodograph equation is obtained. The slow phase-field variable is responsible for the description of data at small undercoolings and the fast gradient flow variable accounts for local non-equilibrium effects at high undercoolings. The introduction of these two types of variables makes the solution of the hodograph equation sufficiently flexible for a reliable description of all nonlinearities of the kinetic curves predicted in MD simulations of Cr and Si. This article is part of the theme issue ‘Transport phenomena in complex systems (part 1)’.

Science & Technology - Other Topics↗
DOE OSTI2020

Influence of Terminal Carboxyl Groups on the Structure and Reactivity of Functionalized m-Carboranethiolate Self-Assembled Monolayers

The structure and function of self-assembled monolayers (SAMs) at the nanoscale are determined by the steric and electronic effects of their building blocks. Carboranethiol molecules form pristine monolayers that provide tunable two-dimensional systems to probe lateral and interfacial interactions. Additional ω-functionality, such as carboxyl groups, can be introduced to change the properties of the exposed surfaces. Here, two geometrically similar isomeric m-carborane analogues of m-mercaptobenzoic acid, 1-COOH-7-SH-1,7-C 2 B 10 H 10 and racem-1-COOH-9-SH-1,7-C 2 B 10 H 10 , are characterized and their SAMs on Au{111} are examined. The latter isomer belongs to the rare group of chiral cage molecules and becomes, to our knowledge, the first example assembled on Au{111}. Although different in symmetry, molecules of both isomers assemble into similar hexagonal surface patterns. The nearest-neighbor spacing of 8.4 ± 0.4 Å is larger than that of non-carboxylated isomers, consistent with the increased steric demands of the carboxyl groups. Computational modeling reproduced this spacing and suggests a tilt relative to the surface normal. However, tilt domains are not observed experimentally, suggesting the presence of strong lateral interactions. Analyses of the influence of the functional groups through the pseudo-aromatic m-carborane skeleton showed that the thiol group attached to either carbon or boron atoms increases the carboxyl group acidity in solution. In contrast, the acidity of the exposed carboxyl group in the SAMs decreases upon surface attachment; computational analyses suggest that the driving force of this shift is the dielectric of the environment in the monolayer as a result of confined intermolecular interactions, proximity to the Au surface, and partial desolvation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗