Results for “negative thermal expansion” — Page 8

DOE OSTI2020

Sum of oscillator-strength moments and asymptotic behaviour of thermally induced broadening and shift of energy levels of Rydberg atom circular states

Based on the rules for summing oscillator-strength moments, we derive analytical expressions for environmentally (thermally) induced energy-level shifts and broadenings of circular Rydberg states with maximum orbital (l) and magnetic (m) quantum numbers, l = |m| = n – 1. The formulae for the energy of interaction with blackbody radiation are presented in the form of series expansion in even powers of the small parameter η = Z{sup 2}/(n{sup 3}k{sub B}T) ≪ 1 in the region of high temperatures T and principal quantum numbers n (Z is the charge of the residual ion). The expression for the thermally induced width contains a negative temperature-independent term coinciding in absolute value with the spontaneous width, so that the temperature-independent term is absent in the expression for the sum of the spontaneous and thermally induced widths. A similar expansion in powers of η for the thermally induced shift also contains a temperature-independent term proportional to 1/n{sup 6}. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS2009

Expansion Compression Contacts for Thermoelectric Legs

In a proposed alternative to previous approaches to making hot-shoe contacts to the legs of thermoelectric devices, one relies on differential thermal expansion to increase contact pressures for the purpose of reducing the electrical resistances of contacts as temperatures increase. The proposed approach is particularly applicable to thermoelectric devices containing p-type (positive-charge-carrier) legs made of a Zintl compound (specifically, Yb14MnSb11) and n-type (negative charge-carrier) legs made of SiGe. This combination of thermoelectric materials has been selected for further development, primarily on the basis of projected thermoelectric performance. However, it is problematic to integrate, into a practical thermoelectric device, legs made of these materials along with a metal or semiconductor hot shoe that is required to be in thermal and electrical contact with the legs. This is partly because of the thermal-expansion mismatch of these materials: The coefficient of thermal expansion (CTE) of SiGe is 4.5 x 10(exp -6) C (exp -1), while the CTE of Yb14MnSb11 is 20 x 10(exp -6) C(exp -1). Simply joining a Yb14MnSb11 and a SiGe leg to a common hot shoe could be expected to result in significant thermal stresses in either or both legs during operation. Heretofore, such thermal stresses have been regarded as disadvantageous. In the proposed approach, stresses resulting from the CTE mismatch would be turned to advantage.

Sakamoto, Jeffrey↗

NASA NTRS1986

Brush-Type Connectors for Thermoelectric Elements

Wire brushes used to connect positive and negative legs of semiconductor thermoelectric generators to power leads and heat sources and sinks. Brushes are flexible thermal and electrical conductors that readily accommodate expansion and contraction of legs with changing temperature. Thus, direct conductive coupling between heat source and sink allowed, in contrast to older and less efficient method of having to couple radiatively to accommodate thermal expansion.

Wood, C.↗

DOE OSTI2025

Transient Modeling and Simulation of a Generic Stable Salt Reactor

A SAM system-level model of a generic stable salt reactor has been developed to investigate thermal-hydraulic behavior and safety performance under steady and transient conditions. The model integrates information generated from a reactor physics analysis using PROTEUS and PERSENT, and a computation fluid dynamics (CFD) analysis using STAR-CCM+. A loose, iterative coupling scheme between PROTEUS and SAM is implemented to calculate the equilibrium power and temperature distributions in the steady-state critical core condition. The converged steady-state model is then used in PERSENT to calculate the four reactivity feedback temperature coefficients (Doppler, fuel density, coolant density, and core radial expansion) and kinetic parameters that are needed in SAM to model the temperature feedback effects in transient simulations. Within the fully enclosed liquid fuel pins, natural convection is the dominant heat transfer mechanism. The STAR-CCM+ model of the fuel pin considers conjugate heat transfer from the liquid fuel salt to the pin cladding and external reactor coolant. The CFD results of the axial and radial temperature profiles are used to empirically determine an effective fuel salt thermal conductivity in the SAM fuel pin model so that the temperatures predicted by the SAM model match as closely as possible the CFD results. In the central region of the fuel pin, the effective thermal conductivity is as high as similar to 60 times the physical fuel salt thermal conductivity. The whole-plant SAM model is then used to simulate an unprotected station blackout transient. The results of this simulation showed that the large negative fuel axial expansion reactivity feedback reduces fission power to similar to 2.4% nominal power. The core is cooled by natural circulation, which removes heat in the core to the emergency heat removal system, and ultimately, to the ambient. However, peak fuel salt and cladding temperatures can potentially reach as high as 1500 K, albeit briefly, if the shutdown mechanism fails to operate.

stable salt reactor; transient simulations; system↗

DOE OSTI2022

Towards new zero-thermal-expansion materials: Li-free quartz solid solutions stuffed with transition metal cations

Stuffed aluminosilicate quartz solid solutions (Qss) represent the main functional component of state-of-the-art zero-thermal-expansion glass-ceramics. For the first time, we present the synthesis of Li-, Mg- and Zn-free Qss solely stuffed with transition metal cations (Fe 2+ , Ni 2+ , Co 2+ ); partial Li + co-doping enables also significant Mn 2+ incorporation. Further, they were obtained by glass powder crystallization; Qss crystals exhibit compositionally tunable coefficients of thermal expansion (CTEs), from - 2 × 10 -6 K -1 to ~10 × 10 -6 K -1 in the range 30–300 °C. Co 2+ -bearing crystals exhibit the closest-to-zero CTE value (0.2 ×10 -6 K -1 ) and the most isotropic behavior in the whole Qss family, opening up new perspectives for the development of Li-free low-expansion materials. From a structural point of view, we identified the unit cell volume (and not the pseudo-hexagonality of the aluminosilicate framework) as the key structural parameter leading to low or negative CTEs in Qss, with a linear correlation extending to non-stuffed non-silicate quartz-like phases.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Electrode Elastic Modulus as the Dominant Factor in the Capping Effect in Ferroelectric Hafnium Zirconium Oxide Thin Films

The discovery of ferroelectricity in hafnia based thin films has catalyzed significant research focused on understanding the ferroelectric property origins and means to increase stability of the ferroelectric phase. Prior studies have revealed that biaxial tensile stress via an electrode “capping effect” is a suspected ferroelectric phase stabilization mechanism. This effect is commonly reported to stem from a coefficient of thermal expansion (CTE) incongruency between the hafnia and top electrode. Despite reported correlations between ferroelectric phase fraction and electrode CTE, the thick silicon substrate dominates the mechanics and CTE-related stresses, negating any dominant contribution from an electrode CTE mismatch toward the capping effect. In this work, these discrepancies are reconciled, and the origin of these differences deriving from electrode elastic modulus, not CTE, is demonstrated. Pt/M/TaN/Hf 0.5 Zr 0.5 O 2 /TaN/Si devices, where M is platinum, TaN, iridium, tungsten, and ruthenium, were fabricated. Sin 2 (ψ)-based X-ray diffraction measurements of biaxial stress in the HZO layer reveal a strong correlation between biaxial stress, remanent polarization, and electrode elastic modulus. Conversely, a low correlation exists between the electrode CTE, HZO biaxial stress, and remanent polarization. A higher elastic modulus enhances the resistance to electrode elastic deformation, which intensifies the capping effect during crystallization, and culminates in the tandem restriction of out-of-plane hafnia volume expansion and preferential orientation of the polar c-axis normal to the plane. These behaviors concomitantly increase the ferroelectric phase stability and polarization magnitude. This work provides electrode material selection guidelines toward the development of high-performing ferroelectric hafnia into microelectronic devices, such as nonvolatile memories.

36 MATERIALS SCIENCE↗

DOE OSTI2024

MARVEL Reactor Fuel Performance Report (Rev.2)

The Microreactor Applications Research Validation and EvaLuation (MARVEL) project is producing a high temperature liquid metal-cooled nuclear test bed at Idaho National Laboratory (INL) to ultimately improve the integration of microreactors to end-user applications. This ambitious effort seeks to design, authorize, construct, test, and operate the reactor within five years. In order to construct and operate the MARVEL reactor in a timely manner, the system will utilize materials and component designs which have already been used, qualified, or licensed from previous reactors. The MARVEL reactor will be located at the INL Transient Reactor Test (TREAT) facility in the north high-bay equipment pit and will use the existing 304 stainless steel-clad U-ZrH1.6 pin-type fuel system developed by General Atomics and purchased from TRIGA International. This fuel has been previously qualified under the United States Department of Energy’s (US DOE) Reduced Enrichment for Research and Test Reactors (RERTR) Program. Even though the regulator of the MARVEL reactor is the US DOE, the standards and overall approach recommended by the Nuclear Regulatory Commission is well-defined and utilized here. Following NUREG-1537 regulatory guidance, this report documents the authorization case for the MARVEL fuel system’s application to MARVEL and establishes stable and predictable fuel performance during the most thermophysically unfavorable conditions achievable in the MARVEL reactor. To that end, this report provides a comprehensive survey of the known thermophysical properties, performance, and quantitative relationships associated with the MARVEL reactor fuel element and uses this information to determine its mechanical integrity and risk of reaching unacceptable conditions during the most extreme accident scenarios predicted for the reactor using the most conservative assumptions available. The information contained herein is compiled from a combination of historical reports and peer reviewed scientific publication manuscripts. Known mechanisms under which the fuel is susceptible to failure are highlighted and compared to conditions that could exist in the MARVEL reactor during an unanticipated transient or accident scenario. The two scenarios considered for analysis in this report are (1) an unprotected loss of flow accident and (2) a hypothetical unprotected loss of coolant accident during the loss of flow accident. Preliminary 2D steady-state analyses herein indicate that both fuel-cladding chemical interactions and fuel-cladding mechanical interactions are negligible throughout the fuel’s operational cycle under both normal and high temperature accident scenario conditions. Although higher fidelity 3D time-dependent modeling and simulations are planned, the following may be concluded presently. The MARVEL fuel element maintains its geometric stability and structural integrity during the most extreme accident scenarios predicted for the MARVEL reactor. The hoop stress during the unprotected loss of flow accident reaches about -1.27 MPa; this negative stress indicates that it is compressive rather than tensile. The compressive stress is a result of the NaK pressure on the outside of the fuel element, caused by the restricted thermal expansion of the NaK coolant, exceeding the internal pressures generated inside of the fuel element. The hoop stress generated in the cladding during the unprotected loss of coolant accident reaches a maximum of about approximately 10 MPa, which is nearly an order of magnitude less than the predicted yield strength of the cladding under high-temperature accident scenario conditions. Calculations were compared with results from high performance computational simulations using BISON and are in very close agreement. A conservative MARVEL fuel meat peak temperature limit of 900 °C is recommended presently, which is about 180 °C higher than the peak fuel temperature predicted to occur during the most extreme accident. Based on the known properties and behavior of the MARVEL fuel element, the fuel successfully meets its design and safety requirements under normal and most extreme accident conditions with a large safety margin.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS1983

Dimensional stability of Superinvar

Attention is called to new thermal expansion measurements on temporally stable Superinvar. The measurements indicate that its thermal expansivity vs temperature is more desirable than has been suggested by earlier measurements (Berthold et al., 1976). It is pointed out that at approximately 47 C, the thermal expansion coefficient is zero; however, the coefficient increases rapidly as the temperature departs from 47 C. A second zero-crossing of the expansivity is found at -21 C. The magnitude of negative expansivity between -21 C and 45 C remains bounded and small. No disruptive and reversible phase transition is found at temperatures down to -26 C.

Connors, C.↗

DOE OSTI2026

MARVEL Reactor Fuel Performance Report

The Microreactor Applications Research Validation and EvaLuation (MARVEL) project is producing a high temperature liquid metal-cooled nuclear test bed at Idaho National Laboratory (INL) to ultimately improve the integration of microreactors to end-user applications. This ambitious effort seeks to design, authorize, construct, test, and operate the reactor within five years. In order to construct and operate the MARVEL reactor in a timely manner, the system will utilize materials and component designs which have already been used, qualified, or licensed from previous reactors. The MARVEL reactor will be located at the INL Transient Reactor Test (TREAT) facility in the north high-bay equipment pit and will use the existing 304 stainless steel-clad U-ZrH1.6 pin-type fuel system developed by General Atomics and purchased from TRIGA International. This fuel has been previously qualified under the United States Department of Energy’s (US DOE) Reduced Enrichment for Research and Test Reactors (RERTR) Program. Even though the regulator of the MARVEL reactor is the US DOE, the standards and overall approach recommended by the Nuclear Regulatory Commission is well-defined and utilized here. Following NUREG-1537 regulatory guidance, this report documents the authorization case for the MARVEL fuel system’s application to MARVEL and establishes stable and predictable fuel performance during the most thermophysically unfavorable conditions achievable in the MARVEL reactor. To that end, this report provides a comprehensive survey of the known thermophysical properties, performance, and quantitative relationships associated with the MARVEL reactor fuel element and uses this information to determine its mechanical integrity and risk of reaching unacceptable conditions during the most extreme accident scenarios predicted for the reactor using the most conservative assumptions available. The information contained herein is compiled from a combination of historical reports and peer reviewed scientific publication manuscripts. Known mechanisms under which the fuel is susceptible to failure are highlighted and compared to conditions that could exist in the MARVEL reactor during an unanticipated transient or accident scenario. The two scenarios considered for analysis in this report are (1) an unprotected loss of flow accident and (2) a hypothetical unprotected loss of coolant accident during the loss of flow accident. Preliminary 2D steady-state analyses herein indicate that both fuel-cladding chemical interactions and fuel-cladding mechanical interactions are negligible throughout the fuel’s operational cycle under both normal and high temperature accident scenario conditions. Although higher fidelity 3D time-dependent modeling and simulations are planned, the following may be concluded presently. The MARVEL fuel element maintains its geometric stability and structural integrity during the most extreme accident scenarios predicted for the MARVEL reactor. The hoop stress during the unprotected loss of flow accident reaches about -1.27 MPa; this negative stress indicates that it is compressive rather than tensile. The compressive stress is a result of the NaK pressure on the outside of the fuel element, caused by the restricted thermal expansion of the NaK coolant, exceeding the internal pressures generated inside of the fuel element. The hoop stress generated in the cladding during the unprotected loss of coolant accident reaches a maximum of about approximately 10 MPa, which is nearly an order of magnitude less than the predicted yield strength of the cladding under high-temperature accident scenario conditions. Calculations were compared with results from high performance computational simulations using BISON and are in very close agreement. A conservative MARVEL fuel meat peak temperature limit of 900 °C is recommended presently, which is about 180 °C higher than the peak fuel temperature predicted to occur during the most extreme accident. Based on the known properties and behavior of the MARVEL fuel element, the fuel successfully meets its design and safety requirements under normal and most extreme accident conditions with a large safety margin.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

Temperature-Dependent Optical and Structural Properties of Chiral Two-Dimensional Hybrid Lead-Iodide Perovskites

Layered hybrid halide perovskites gain chirality via the incorporation of chiral organic cations in the spacer layer. These so-called chiral two-dimensional (2D) halide perovskites have attracted considerable interest recently for chiral optoelectronic, spintronic, and ferroelectric applications. However, the effect of temperature on these materials, especially how the structure changes with temperature and its impact on the chiral optoelectronic properties, remains an open question. Here, we study the effect of temperature change on chiral optoelectronic and structural properties through temperature-dependent circularly polarized photoluminescence (CPPL) microscopy and synchrotron powder X-ray diffraction as well as pair distribution function analysis to elucidate the intrinsic chiral optoelectronic and structural variations for R-, S-, and racemic-methylbenzylamine lead iodide. Here our results show that the temperature-induced band gap changes indicate a strong electron–phonon coupling compared to the thermal-induced lattice expansion in chiral 2D perovskites. From powder diffraction measurements, a monotonic lattice expansion is observed on heating with no structural phase transitions over 90–360 K detected for the three samples studied herein. Locally, a strongly anisotropic and even negative expansion in some components of the instantaneous Pb–I pair-distance distribution is suggestive of coupling between dynamical intralayer distortions and lattice expansion. This work provides insights into the fundamental understanding of the temperature effect on chiral optoelectronic and structural properties of chiral 2D perovskites, which can lead to new chiral materials design strategies for future chiral optoelectronic applications.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Dual modulation of the anion-driven thermodynamic properties of aqueous choline halide-based deep eutectic solvents

Deep eutectic solvents (DESs) are considered tunable solvents because their specific properties can be achieved based on the choice of components and their relative concentrations in a mixture. In this article, we investigate the influence of the variation in halide ions (F − , Cl − , Br − , I − ) of choline salts used on the thermodynamic and physicochemical properties of choline halide-based DESs. Our findings show that the density of choline halide-based DESs decreases nonlinearly with an increasing mole fraction of water, following a trend based on the size of the halides, with choline iodide showing the highest density. Temperature-dependent density data reveal that the thermal expansion coefficient decreases slightly with increasing water content, indicating a more stable volume at a higher mole fraction of water. The excess molar volume (V E ) of the DES mixtures exhibits complex behavior depending on the choline halide used, with both negative and positive V E values observed across different water mole fractions. These variations are linked to the hydrogen bonding interactions between the DES components and water molecules. In addition, viscosities decrease with increasing water content, suggesting the disruption of hydrogen bonding networks and enhanced mobility of the ions, which contributes to the observed increase in conductivity. The excess molar Gibbs energies, enthalpies, and entropies of activation have also been determined.

Choline halide↗

NASA NTRS1985

Temperature dependence of gamma-gamma prime lattice mismatch in nickel-base superalloys

High temperature X-ray diffraction techniques were used to determine the gamma-gamma prime lattice mismatch of three different nickel-base superalloys at temperatures between 18 and 1000 C. The measurements were performed on oriented single-crystal disks which had been aged to produce a semicoherent gamma-gamma prime structure. The thermal expansion of the lattice parameters of the gamma and gamma-prime phases was described by a second-order polynomial expression. The expansion of the gamma-prime phase was consistently smaller than that of the gamma phase, which caused the lattice mismatch to become more negative at higher temperatures. It was also shown that high values of lattice mismatch resulted in increased rates of directional gamma-prime coarsening during elevated temperature creep exposure.

Nathal, M. V.↗

DOE OSTI2023

In Situ High-Temperature Raman Spectroscopy of UCl 3 : A Combined Experimental and Theoretical Study

Uranium trichloride (UCl 3 ) has received growing interest for its use in uranium-fueled molten salt reactors and in the pyrochemical processing of used fuel. In this paper, we report for the first time the experimentally determined Raman spectra of UCl 3 , at both ambient condition and in situ high temperatures up to 871 K. The frequencies of five of the Raman-active vibrational modes (v i ) of UCl 3 exhibit a negative temperature derivative ((∂ν i /∂T) P ) with increasing temperature. Here, this red-shift behavior is likely due to the elongation of U–Cl bonds. The average isobaric mode Grüneisen parameter (γ iP = 0.91 ± 0.02) of UCl 3 was determined through use of the coefficient of thermal expansion published in Vogel et al. (2021) and the (∂ νi /∂T) P values determined in this study. These results are in general agreement with those calculated here by density functional theory (DFT+U). Finally, a comparison of the ambient band positions of UCl 3 to those of isostructural lanthanide (La–Eu) and actinide chlorides (Am–Cf) has been made.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2001

Hydrodynamic Stability of Liquid-Propellant Combustion: Landau's Problem Revisited

Hydrodynamic, or Landau, instability in combustion is typically associated with the onset of wrinkling of a flame surface, corresponding to the formation of steady cellular structures as the stability threshold is crossed. As its name suggests, it stems from hydrodynamic effects connected with thermal expansion across the reaction region. In the context of liquid-propellant combustion, the classical models that originally predicted this phenomenon have been extended to include the important effects that arise from a dynamic dependence of the burning rate on the local pressure and temperature fields. Thus, the onset of Landau instability has now been shown to occur for sufficiently small negative values of the pressure sensitivity of the burning rate, significantly generalizing previous classical results for this problem that assumed a constant normal burning rate. It has also been shown that the onset of instability occurs for decreasing values of the disturbance wave number as the gravitational-acceleration parameter decreases. Consequently, in an appropriate weak-gravity limit, Landau instability becomes a long-wave phenomena associated with the formation of large cells on the liquid-propellant surface. Additionally, a pulsating form of hydrodynamic instability has been shown to occur as well, corresponding to the onset of temporal oscillations in the location of the liquid/gas interface. This instability occurs for sufficiently large negative values of the pressure sensitivity, and is enhanced by increasing values of the burning-rate temperature sensitivity. It is further shown that for sufficiently small values of this parameter, there exists a stable range of pressure sensitivities for steady, planar burning such that the classical cellular form of hydrodynamic instability and the more recent pulsating form of hydrodynamic instability can each occur as the corresponding stability threshold is crossed. For larger thermal sensitivities, however, the pulsating stability boundary evolves into a C-shaped curve in the (disturbance-wave number, pressure-sensitivity) plane, indicating loss of stability to pulsating perturbations for all sufficiently large disturbance wavelengths. It is thus concluded, based on characteristic parameter values that an equally likely form of hydrodynamic instability in liquid-propellant combustion is of a nonsteady, long-wave nature, distinct from the steady, cellular form originally predicted by Landau.

Margolis, S. B.↗

DOE OSTI2020

Pions in hot dense matter and their astrophysical implications

Here we study the role of pions in hot dense matter encountered in astrophysics. We find that strong interactions enhance the number density of negatively charged pions and that this enhancement can be calculated reliably for a relevant range of density and temperature by using the virial expansion. We assess the influence of pions and muons on the equation of state (EOS) and weak-interaction rates in hot dense matter. We find that thermal pions increase the proton fraction and soften the EOS. We also find that charged current weak reactions involving pions and muons $\bar{ν}_ μ + μ^– → π$ and $ν_μ + π^– → μ^–$ make an important contribution to the opacity of muon neutrinos. This could influence the dynamics of core-collapse supernovae and neutron-star mergers. Finally, we note that pion-nucleon reactions can alter the evolution of the proton fraction when weak interactions are not in equilibrium.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

Dynamic Pressure Drag on Rising Buoyant Thermals in a Neutrally Stable Environment

Abstract This study examines dynamic pressure drag on rising dry buoyant thermals. A theoretical expression for drag coefficient C d as a function of several other nondimensional parameters governing thermal dynamics is derived based on combining the thermal momentum budget with the similarity theory of Scorer. Using values for these nondimensional parameters from previous studies, the theory suggests drag on thermals is small relative to that on solid spheres in laminar or turbulent flow. Two sets of numerical simulations of thermals in an unstratified, neutrally stable environment using an LES configuration of the Cloud Model 1 (CM1) are analyzed. One set has a relatively low effective Reynolds number R e and the other has an order-of-magnitude-higher R e ; these produce laminar and turbulent resolved-scale flows, respectively. Consistent with the theoretical C d , the magnitude of drag is small in all simulations. However, whereas the laminar thermals have C d ≈ 0.01, the turbulent thermals have weakly negative drag ( C d ≈ −0.1). This difference is explained by the laminar thermals having near vertical symmetry but the turbulent thermals exhibiting considerable vertical asymmetry of their azimuthally averaged flows. In the laminar thermals, buoyancy rapidly becomes concentrated around the main centers of rotation located along the horizontal central axis, leading to expansion of thermals via baroclinic vorticity generation but doing little to break vertical symmetry of the flow. Vertical asymmetry of the azimuthally averaged flow of turbulent thermals is attributed mainly to small-scale resolved eddies that are concentrated in the upper part of the thermals.

Meteorology & Atmospheric Sciences↗

DOE OSTI2021

Assessment of MOOSE-Based Tools for Calculating Radial Core Expansion

Radial core expansion in liquid-metal cooled fast reactor systems is a well-known phenomenon that produces strong reactivity feedback effects. An inherently safe reactor design takes advantage of negative reactivity feedback in accident scenarios by utilizing a core restraint system which produces a bowed shape that allows for radial expansion of the fuel regions. Detailed modeling and simulation of core radial expansion itself as well as subsequent reactivity feedback is a challenging task involving contact of many fuel assembly elements and physics feedback from neutronics, thermal hydraulics, and thermal mechanical response. A variety of physics codes have been developed to model aspects of radial core expansion but in general invoke geometrical or physics approximations. No code system currently exists which tightly and robustly couples these physics with enough detail to fully resolve the complex core radial expansion reactivity feedback effects. The future availability of such a code system is of vital importance to fully understanding the reactivity feedback effects that occur due to radial expansion, and consequently to optimizing the design of the core restraint system. A high-fidelity code will also be used to benchmark existing lower fidelity, faster running models to understand their benefits, limitations, and range of applications. A code development path using MOOSE-based tools is proposed in order to leverage the detailed geometry capabilities and natural tight coupling and robustness of MOOSE-based applications for modeling this complex phenomena. While simulation of the full phenomenon involves several physics, an assessment has been initiated on the capabilities and readiness of the currently available Tensor Mechanics module within MOOSE for calculation of the structural mechanical responses which occur within the reactor core. This report focuses on modeling the force-deformation response which mimics the physics of a duct contact deformation, as well as differential thermal expansion which produces a thermal bowed shaped for the fuel assemblies in a core. Simple examples were initially performed such as simple supported beam bending under load. The complexity of examples was progressively increased to better mimic the duct behavior by including a differential thermal example and inclusion of hexagonal cross-sections in the geometry. Further assessment of the structural mechanical response simulation capability is still required for modeling duct contact interactions and irradiation creep and swelling. Companion thermal hydraulic and neutronics assessments will also be required; these activities are planned for future years. Finally, integration of the multiple physics components through MOOSE is required to predict the core radial expansion and subsequent feedback effects.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NASA NTRS2021

Extended Stroke and Miniaturized Reverse-Operation DTE Thermal Switches

This paper describes two advanced thermal switches under development that are offshoots of the recently flight-qualified 2500:1 reverse-operation differential thermal expansion (DTE) thermal switch (ROD-TSW). The first is the extended stroke ROD-TSW (ES-ROD-TSW) while the second is the miniaturized ROD-TSW (mini-ROD-TSW). Each employs multiple diametrically nested DTE stages in contrast to the single-stage ROD-TSW. The ES-ROD-TSW employs two stages and a negative CTE material known as Allvar and its main purpose is to extend its stroke for use in non-vacuum planetary environments. The mini-ROD-TSW employs four stages to miniaturize its size for use in compact lunar instruments and rovers. The ES-ROD-TSW was TVAC tested at JPL and its ON/OFF ratio is 13000:1 based on a measured ON conductance of 6.89 W/K and a calculated OFF conductance of 0.00053 W/K. The mini-ROD-TSW is targeted to have an ON conductance of 1.5 W/K and an OFF conductance of 0.0015 W/K, both verified by analysis. Test verification of the mini-ROD-TSW remains to be carried out. The paper will provide design/performance details of each device.

Farmer, Jeffery T.↗