Search NASA⌕ Search

SEARCH · Search NASA

Results for “observable behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Minor Elements and Solidification Cracking During Laser Powder-Bed Fusion of a High $\gamma ^{\prime }$ CoNi-Base Superalloy

Here, the cracking behavior of a high γ' volume fraction CoNi-base superalloy fabricated via laser powder bed fusion (LPBF) is studied in relation to the content of carbon and boron. Severe cracking occurred with the increase in boron content from 0.08 to 0.16 at. pct (0.015 to 0.029 wt pct), while compositions with 0.1 to 0.36 at. pct C (0.02 to 0.076 wt pct) and 0.08 at. pct B exhibited minimal cracking. Assessment of cracks in the high-boron composition shows a variation in crack density with printing parameters, and alignment of the cracks with the build direction. Scanning electron microscopy (SEM) of the crack surfaces shows evidence of a solidification cracking mode. Differential thermal analysis (DTA) reveals a decreased incipient melting temperature for the high-boron composition, and atom probe tomography (APT) is used to measure the enrichment at grain boundaries, revealing distinct boron segregation. Scheil-Gulliver solidification simulations for the different C and B levels are consistent with the incipient melting behavior observed with DTA. Evaluation of the solidification cracking susceptibility from the simulations allow for comparison of the CoNi alloy behavior to Ni-base superalloys studied for LPBF fabrication and displays how such metrics may aid in the design of new precipitation-strengthened superalloys for additive manufacturing (AM).

36 MATERIALS SCIENCE↗

Evolution of Structural Order and Magnetic Anisotropy in Yb 0.5 (Co 1– x Fe x ) 3 Ge 3 through Doping of a Kagome Lattice

Kagome materials provide fruitful grounds for exploring the intersection of topology and magnetism. In this article, the single crystal growth of Yb 0.5 (Co 1–x Fe x ) 3 Ge 3 (x = 0.00, 0.25, 0.50, 0.75, and 1.00) is reported. As Fe is substituted into the Co-containing kagome net, the structure transforms from the disordered Y 0.5 Co 3 Ge 3 /CoSn-type hybrid structure to the ordered HfFe 6 Ge 6 -type structure. Diffusive scattering is observed in all doped concentrations that eventually converge to a single reflection in the Fe end member, ultimately doubling the unit cell along the c-axis. Anisotropic magnetic measurements were performed to evaluate how the magnetism of the kagome lattice is influenced by Fe substitution. Magnetic interactions are primarily observed along the c-axis. Additionally, a reorientation of the magnetic easy axis is observed with increasing Fe incorporation, highlighting how the magnetism of this material can be chemically tuned. Resistivity with unusual behavior observed in the doped compositions is also reported. Furthermore, the rationale behind the structural evolution from disordered to ordered is discussed.

36 MATERIALS SCIENCE↗

Magnetic properties of the layered III-VI diluted magnetic semiconductor Ga{sub 1−x}Fe{sub x}Te

Magnetic properties of single crystalline Ga{sub 1−x}Fe{sub x}Te (x = 0.05) have been measured. GaTe and related layered III-VI semiconductors exhibit a rich collection of important properties for THz generation and detection. The magnetization versus field for an x = 0.05 sample deviates from the linear response seen previously in Ga{sub 1−x}Mn{sub x}Se and Ga{sub 1−x}Mn{sub x}S and reaches a maximum of 0.68 emu/g at 2 K in 7 T. The magnetization of Ga{sub 1−x}Fe{sub x}Te saturates rapidly even at room temperature where the magnetization reaches 50% of saturation in a field of only 0.2 T. In 0.1 T at temperatures between 50 and 400 K, the magnetization drops to a roughly constant 0.22 emu/g. In 0 T, the magnetization drops to zero with no hysteresis present. The data is consistent with Van-Vleck paramagnetism combined with a pronounced crystalline anisotropy, which is similar to that observed for Ga{sub 1−x}Fe{sub x}Se. Neither the broad thermal hysteresis observed from 100-300 K in In{sub 1−x}Mn{sub x}Se nor the spin-glass behavior observed around 10.9 K in Ga{sub 1−x}Mn{sub x}S are observed in Ga{sub 1−x}Fe{sub x}Te. Single crystal x-ray diffraction data yield a rhombohedral space group bearing hexagonal axes, namely R3c. The unit cell dimensions were a = 5.01 Å, b = 5.01 Å, and c = 17.02 Å, with α = 90°, β = 90°, and γ = 120° giving a unit cell volume of 369 Å{sup 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of numerics on the predictive capabilities of reacting flow LES

Combustors in modern aerospace propulsion systems are highly optimized devices and further enhancements to their performance will require advanced predictive modeling techniques. The LES approach has potential to be such a technique, but demonstration of its true predictive capability remains a challenge. In this paper, a methodical study is performed to assess the impact of numerical error on the predictive capabilities of LES and to distinguish it from error arising from physical modeling. Four codes are employed to simulate the bluff body stabilized flame experiment of Volvo Flygmotor AB. The physical models (governing equations and sub-grid models) are kept identical between the codes so that the physical modeling error is the same. For the same reason, computational grids are also kept identical since the sub-grid models are grid dependent. Results indicate that all codes produce a very similar solution for the non-reacting flow in terms of large scale unsteady vortex shedding behavior, mean profiles and second order turbulence statistics, on a suitably refined grid. This solution is also very close to the experimentally observed behavior of the flow. In contrast, for the reacting case, solutions from the various codes exhibit significant differences when analyzed under the same metrics and with similar or even finer grid resolution than that used for the non-reacting case. These differences are large enough to change the macroscopic behavior of the flow, e.g. some codes predict symmetric vortex shedding while others predict asymmetric shedding and some codes show strong recirculation zones while others show stagnant regions behind the bluff body. It is also shown that none of the solutions truly predicts the experimentally observed flow. Given that the physical sub-grid models and computational grids are the same in all the simulations, the inconsistency between results points to a significant impact of numerical methods and, hence, numerical error. The need for mitigation of this impact is highlighted, along with the need for metrics detailing how LES should be applied to reacting flows. It is suggested that both of these issues should be the focus of future work.

Energy & Fuels↗

Collaborative Research: Continuous Dynamic Grid Adaptation in a Global Atmospheric Model - Application and Refinement

This project had goals of advancing the performance capabilities of the numerical general circulation model EULAG and using it to produce a fully operational atmospheric global climate model (AGCM) that can employ either static or dynamic grid stretching for targeted phenomena. The resulting AGCM combined EULAG's advanced dynamics core with the "physics" of the NCAR Community Atmospheric Model (CAM). Effort discussed below shows how we improved model performance and tested both EULAG and the coupled CAM-EULAG in several ways to demonstrate the grid stretching and ability to simulate very well a wide range of scales, that is, multi-scale capability. We leveraged our effort through interaction with an international EULAG community that has collectively developed new features and applications of EULAG, which we exploited for our own work summarized here. Overall, the work contributed to over 40 peer-reviewed publications and over 70 conference/workshop/seminar presentations, many of them invited. 3a. EULAG Advances EULAG is a non-hydrostatic, parallel computational model for all-scale geophysical flows. EULAG's name derives from its two computational options: EULerian (flux form) or semi-LAGrangian (advective form). The model combines nonoscillatory forward-in-time (NFT) numerical algorithms with a robust elliptic Krylov solver. A signature feature of EULAG is that it is formulated in generalized time-dependent curvilinear coordinates. In particular, this enables grid adaptivity. In total, these features give EULAG novel advantages over many existing dynamical cores. For EULAG itself, numerical advances included refining boundary conditions and filters for optimizing model performance in polar regions. We also added flexibility to the model's underlying formulation, allowing it to work with the pseudo-compressible equation set of Durran in addition to EULAG's standard anelastic formulation. Work in collaboration with others also extended the demonstrated range of validity of soundproof models, showing that they are more broadly applicable than some had previously thought. Substantial testing of EULAG included application and extension of the Jablonowski-Williamson baroclinic wave test - an archetype of planetary weather - and further analysis of multi-scale interactions arising from collapse of temperature fronts in both the baroclinic wave test and simulations of the Held-Suarez idealized climate. These analyses revealed properties of atmospheric gravity waves not seen in previous work and further demonstrated the ability of EULAG to simulate realistic behavior over several orders of magnitude of length scales. Additional collaborative work enhanced capability for modeling atmospheric flows with adaptive moving meshes and demonstrated the ability of EULAG to move into petascale computing. 3b. CAM-EULAG Advances We have developed CAM-EULAG in collaboration with former project postdoc, now University of Cape Town Assistant Professor, Babatunde Abiodun. Initial study documented good model performance in aqua-planet simulations. In particular, we showed that the grid adaptivity (stretching) implemented in CAM-EULAG allows higher resolution in selected regions without causing anomalous behavior such as spurious wave reflection. We then used the stretched-grid version to analyze simulated extreme precipitation events in West Africa, comparing the precipitation and event environment with observed behavior. The model simulates fairly well the spatial scale and the interannual and intraseasonal variability of the extreme events, although its extreme precipitation intensity is weaker than observed. In addition, both observations and the simulations show possible forcing of extreme events by African easterly waves. 3c. Other Contributions Through our collaborations, we have made contributions to a wide range of outcomes. For research focused on terrestrial behavior, these have included (1) upwind schemes for gas dynamics, (2) a nonlinear perspective on the dynamics of the Madden-Julian Oscillation, (3) numerical realism of thermal convection, (4) extreme precipitation processes, (5) unstructured meshes, (6) porous-media analogies for simulating flow in urban environments, (7) Monge-Ampere enhancements of semi-Lagrangian methods and (8) further extensions of the generality of EULAG applications to geophysical problems. The generality of EULAG for multi-scale flow was also demonstrated through solar applications. Simulations of solar magnetohydrodynamics showed that EULAG produces the solar cycle fairly well. Although the model's solar cycle is significantly longer than observed, it shows remarkable agreement with observations in features of spatial evolution. These efforts in environments that are extreme from a geophysical perspective have helped to establish the robustness of EULAG as an all-scale code for geophysical applications.

54 ENVIRONMENTAL SCIENCES↗

Toward Electrochemical Studies on the Nanometer and Atomic Scales: Progress, Challenges, and Opportunities

Electrochemical reactions and ionic transport underpin the operation of a broad range of devices and applications, from energy storage and conversion to information technologies, as well as biochemical processes, artificial muscles, and soft actuators. Understanding the mechanisms governing function of these applications requires probing local electrochemical phenomena on the relevant time and length scales. Here, we discuss the challenges and opportunities for extending electrochemical characterization probes to the nanometer and ultimately atomic scales, including challenges in down-scaling classical methods, the emergence of novel probes enabled by nanotechnology and based on emergent physics and chemistry of nanoscale systems, and the integration of local data into macroscopic models. Scanning probe microscopy (SPM) methods based on strain detection, potential detection, and hysteretic current measurements are discussed. We further compare SPM to electron beam probes and discuss the applicability of electron beam methods to probe local electrochemical behavior on the mesoscopic and atomic levels. Similar to a SPM tip, the electron beam can be used both for observing behavior and as an active electrode to induce reactions. We briefly discuss new challenges and opportunities for conducting fundamental scientific studies, matter patterning, and atomic manipulation arising in this context.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Long-term variations of Cygnus X-1 observed with the HEAO-3 high resolution gamma-ray spectrometer

The HEAO-3 high resolution gamma-ray spectrometer observed Cygnus X-1 for a total of 148 days between Sept. 27, 1979 and June 2, 1980. During this period, an upward and a downward transition of the hard X-ray flux in the 48-300 keV range were observed. The time scales of these transitions were long (20-50 days) compared with previous observation of the same source. The second, downward, transition was anticorrelated with the 1-12 keV flux, a type of behavior observed previously; however, the upward transition was accompanied by an upward transition in the low-energy X-ray flux, a result contrary to previous experience.

Ling, J. C.↗

Observations from The EV Project in Q4 2013

This is a summary report for The EV Project 4th quarter 2013 reports. It describes electric vehicle driver driving and charging behavior observed in Q4. It is the same report as the previously approved/published Q3 2013 report, only the numbers have been updated. It is for public release and does not have limited distribution.

33 ADVANCED PROPULSION SYSTEMS↗

Determination of single crystal thermal expansion in Uranium-6wt%Niobium shape memory alloy using in-situ diffraction and modeling of textured polycrystalline samples

In-situ neutron diffraction and ex-situ dilatometry experiments were performed on a chemically banded, quenched uranium-6wt% niobium shape memory alloy to study the impact of deformation-(detwinning-) induced texture on the evolution of thermally induced strains (and associated stresses). Thermal heating and cooling cycles between 5K and 473K were performed in-situ with neutron diffraction, and the lattice strain evolution is reported for the observed monoclinic α" phase. Comparisons between the measured diffraction strains and macroscopic dilatometry experiments reveal relationships between micro- and macro-level thermal expansion. Softening of the texture during heating suggests that twin boundary motion can accommodate the large internal thermal strains which are approximately 2% greater than that typically observed during the 175K heating interval used to age more randomly oriented polycrystalline material. Assuming weak constraint of neighboring grains in randomly textured polycrystals, the single crystal thermal expansion tensor is extracted from measurements of lattice strains over the range 5K to 473K. Predictions of polycrystalline thermal expansion, based upon this single crystal thermal expansion tensor, are shown to compare favorably with bulk thermal expansion observations of the as quenched microstructure. However, such a lower-bound estimate is insufficient to explain all aspects of the behavior of the textured material, where the matrix is not isotropic. In conclusion, it is hypothesized that relaxation processes which occur within the quenched microstructure during heating are responsible for the distinct thermal expansion behavior observed during the initial heating cycle compared to cooling and subsequent cycling.

36 MATERIALS SCIENCE↗

Simple Validation of Transient Plume Models Using Molecular Beam-Related Applications

A simple effort using molecular beam data to compare the results of two different transient free molecule point source models was performed, motivated by a desire to determine the utility of such formulations for a variety of time-dependent applications. These models are evaluated against effusive molecular beam time-of-flight data, as well as behavior observed in pulsed laser ablation experiments and high-fidelity direct simulation Monte Carlo results. Such comparisons indicate that the physical behavior of these time-dependent expansions require taking a surface-enforced directional bias into account. This bias has been absent in a number of investigative formulations, both historical and current.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-Performance Algorithm for Solving the Diagnosis Problem

An improved method of model-based diagnosis of a complex engineering system is embodied in an algorithm that involves considerably less computation than do prior such algorithms. This method and algorithm are based largely on developments reported in several NASA Tech Briefs articles: The Complexity of the Diagnosis Problem (NPO-30315), Vol. 26, No. 4 (April 2002), page 20; Fast Algorithms for Model-Based Diagnosis (NPO-30582), Vol. 29, No. 3 (March 2005), page 69; Two Methods of Efficient Solution of the Hitting-Set Problem (NPO-30584), Vol. 29, No. 3 (March 2005), page 73; and Efficient Model-Based Diagnosis Engine (NPO-40544), on the following page. Some background information from the cited articles is prerequisite to a meaningful summary of the innovative aspects of the present method and algorithm. In model-based diagnosis, the function of each component and the relationships among all the components of the engineering system to be diagnosed are represented as a logical system denoted the system description (SD). Hence, the expected normal behavior of the engineering system is the set of logical consequences of the SD. Faulty components lead to inconsistencies between the observed behaviors of the system and the SD. Diagnosis the task of finding faulty components is reduced to finding those components, the abnormalities of which could explain all the inconsistencies. The solution of the diagnosis problem should be a minimal diagnosis, which is a minimal set of faulty components. The calculation of a minimal diagnosis is inherently a hard problem, the solution of which requires amounts of computation time and memory that increase exponentially with the number of components of the engineering system. Among the developments to reduce the computational burden, as reported in the cited articles, is the mapping of the diagnosis problem onto the integer-programming (IP) problem. This mapping makes it possible to utilize a variety of algorithms developed previously for IP to solve the diagnosis problem. In the IP approach, the diagnosis problem can be formulated as a linear integer optimization problem, which can be solved by use of well-developed integer-programming algorithms. This concludes the background information.

Fijany, Amir↗

Efficient Model-Based Diagnosis Engine

An efficient diagnosis engine - a combination of mathematical models and algorithms - has been developed for identifying faulty components in a possibly complex engineering system. This model-based diagnosis engine embodies a twofold approach to reducing, relative to prior model-based diagnosis engines, the amount of computation needed to perform a thorough, accurate diagnosis. The first part of the approach involves a reconstruction of the general diagnostic engine to reduce the complexity of the mathematical-model calculations and of the software needed to perform them. The second part of the approach involves algorithms for computing a minimal diagnosis (the term "minimal diagnosis" is defined below). A somewhat lengthy background discussion is prerequisite to a meaningful summary of the innovative aspects of the present efficient model-based diagnosis engine. In model-based diagnosis, the function of each component and the relationships among all the components of the engineering system to be diagnosed are represented as a logical system denoted the system description (SD). Hence, the expected normal behavior of the engineering system is the set of logical consequences of the SD. Faulty components lead to inconsistencies between the observed behaviors of the system and the SD (see figure). Diagnosis - the task of finding faulty components - is reduced to finding those components, the abnormalities of which could explain all the inconsistencies. The solution of the diagnosis problem should be a minimal diagnosis, which is a minimal set of faulty components. A minimal diagnosis stands in contradistinction to the trivial solution, in which all components are deemed to be faulty, and which, therefore, always explains all inconsistencies.

Fijany, Amir↗

SPATIALLY RESOLVING THE HK Tau B EDGE-ON DISK FROM 1.2 TO 4.7 {mu}m: A UNIQUE SCATTERED LIGHT DISK

We present spatially resolved scattered light images of the circumstellar disk around HK Tau B at 3.8 and 4.7 {mu}m taken with the Keck Telescope Laser Guide Star Adaptive Optics (AO) system, and 1.6-2.12 {mu}m images taken with the Very Large Telescope/NACO AO system. Combined with previously published optical Hubble Space Telescope data, we investigate the spatially resolved scattered light properties of this edge-on circumstellar disk and probe for the presence of large grains. The 0.6-3.8 {mu}m scattered light observations reveal strong, and in some cases, unusual, wavelength dependencies in the observed disk morphology. The separation between the two scattered light nebulae, which is directly proportional to the disk-mass-opacity product, decreases by 30% between 0.6 and 3.8 {mu}m. Over the same wavelength range, the FWHM of the disk nebulosity declines by a factor of two, while the flux ratio between the two nebulae increases by a factor of {approx}8. No other disk known to date shows a flux ratio that increases with wavelength. Both the FWHM and nebula flux ratio are affected by the scattering phase function and the observed behavior can most readily be explained by a phase function that becomes more forward throwing with wavelength. The multi-wavelength scattered light observations also confirm the asymmetric nature of the disk and show that the level of asymmetry is a function of wavelength. We use the MCFOST radiative transfer code to model the disk at four wavelengths, corresponding to the I, H, Ks, and L' bandpasses. A single power-law grain size distribution can recreate the observed disk properties simultaneously at all four wavelengths. Bayesian analysis of the dust parameters finds a 99% probability that the maximum grain size is 5.5 {mu}m or larger. We also find that the grain size distribution is steep, with a 99% probability of a power-law index of 4.2 or larger, suggesting that these large grains are a small fraction of the overall dust population. The best-fit dust asymmetry parameter for each individual wavelength shows an unusual behavior, increasing with wavelength from the optical through the near-infrared, peaking at {approx}0.8 between 2.2 and 3.8 {mu}m, then decreasing by a factor of two by {approx}12 {mu}m. Comparing the wavelength dependence of the asymmetry parameter for HK Tau B with those for the interstellar medium (ISM) and dark cloud dust models, we find considerable evolution from an ISM state and argue for the presence of grain growth within the disk. Further, comparing the wavelength dependence of the asymmetry parameter for GG Tau, HV Tau C, and HK Tau B, the three disks that have been spatially resolved in scattered light between 0.8 and 3.8 {mu}m, finds a diverse range of dust properties, indicating differing degrees of grain growth for disks at a similar age.

79 ASTRONOMY AND ASTROPHYSICS↗

Auto-ignition study of FACE gasoline and its surrogates at advanced IC engine conditions

Robust surrogate formulation for gasoline fuels is challenging, especially in mimicking auto-ignition behavior observed under advanced combustion strategies including boosted spark-ignition and advanced compression ignition. This work experimentally quantifies the auto-ignition behavior of bi- and multi-component surrogates formulated to represent a mid-octane (Anti-Knock Index 91.5), full boiling-range, research grade gasoline (Fuels for Advanced Combustion Engines, FACE-F). A twin-piston rapid compression machine is used to achieve temperature and pressure conditions representative of in-cylinder engine operation. Changes in low- and intermediate-temperature behavior, including first-stage and main ignition times, are quantified for the surrogates and compared to the gasoline. This study identifies significant discrepancies in the first-stage ignition behavior, the influence of pressure for the bi- to ternary blends, and highlights that better agreement is achieved with multi-component surrogates, particularly at lower temperature regimes. A recently-updated detailed kinetic model for gasoline surrogates is also used to simulate the measurements. Finally, sensitivity analysis is employed to interpret the kinetic pathways responsible for reactivity trends in each gasoline surrogate.

36 MATERIALS SCIENCE↗

Optical and Calorimetric Studies of Cholesterol-Rich Filamentous, Helical Ribbon and Crystal Microstructures

Formation of biological self-assemblies at all scales is a focus of studies in fields ranging from biology to physics to biomimetics. Understanding the physico-chemical properties of these self-assemblies may lead to the design of bio-inspired structures and technological applications. Here we examine self-assembled filamentous, helical ribbon, and crystal microstructures formed in chemically defined lipid concentrate (CDLC), a model system for cholesterol crystallization in gallbladder bile. CDLC consists of cholesterol, bilayer-forming amphiphiles, micelle-forming amphiphiles, and water. Phase contrast and differential interference contrast (DIC) microscopy indicate the presence of three microstructure types in all samples studied, and allow for an investigation of the structures' unique geometries. Additionally, confocal microscopy is used for qualitative assessment of surface and internal composition. To complement optical observations, calorimetric (differential-scanning and modulation) experiments, provide the basis for an in-depth understanding of collective and individual thermal behavior. Observed ''transition'' features indicate clustering and ''straightening'' of helical ribbons into short, increasingly thickening, filaments that dissolve with increasing temperature. These results suggest that all microstructures formed in CDLC may coexist in a metastable chemical equilibrium. Further investigation of the CDLC thermal profile should uncover the process of cholesterol crystallization as well as the unique design and function of microstructures formed in this system.

60 APPLIED LIFE SCIENCES↗

Bimolecular reaction of CH{sub 3} + CO in solid p-H{sub 2}: Infrared absorption of acetyl radical (CH{sub 3}CO) and CH{sub 3}-CO complex

We have recorded infrared spectra of acetyl radical (CH{sub 3}CO) and CH{sub 3}-CO complex in solid para-hydrogen (p-H{sub 2}). Upon irradiation at 248 nm of CH{sub 3}C(O)Cl/p-H{sub 2} matrices, CH{sub 3}CO was identified as the major product; characteristic intense IR absorption features at 2990.3 (ν{sub 9}), 2989.1 (ν{sub 1}), 2915.6 (ν{sub 2}), 1880.5 (ν{sub 3}), 1419.9 (ν{sub 10}), 1323.2 (ν{sub 5}), 836.6 (ν{sub 7}), and 468.1 (ν{sub 8}) cm{sup −1} were observed. When CD{sub 3}C(O)Cl was used, lines of CD{sub 3}CO at 2246.2 (ν{sub 9}), 2244.0 (ν{sub 1}), 1866.1 (ν{sub 3}), 1046.7 (ν{sub 5}), 1029.7 (ν{sub 4}), 1027.5 (ν{sub 10}), 889.1 (ν{sub 6}), and 723.8 (ν{sub 7}) cm{sup −1} appeared. Previous studies characterized only three vibrational modes of CH{sub 3}CO and one mode of CD{sub 3}CO in solid Ar. In contrast, upon photolysis of a CH{sub 3}I/CO/p-H{sub 2} matrix with light at 248 nm and subsequent annealing at 5.1 K before re-cooling to 3.2 K, the CH{sub 3}-CO complex was observed with characteristic IR features at 3165.7, 3164.5, 2150.1, 1397.6, 1396.4, and 613.0 cm{sup −1}. The assignments are based on photolytic behavior, observed deuterium isotopic shifts, and a comparison of observed vibrational wavenumbers and relative IR intensities with those predicted with quantum-chemical calculations. This work clearly indicates that CH{sub 3}CO can be readily produced from photolysis of CH{sub 3}C(O)Cl because of the diminished cage effect in solid p-H{sub 2} but not from the reaction of CH{sub 3} + CO because of the reaction barrier. Even though CH{sub 3} has nascent kinetic energy greater than 87 kJ mol{sup −1} and internal energy ∼42 kJ mol{sup −1} upon photodissociation of CH{sub 3}I at 248 nm, its energy was rapidly quenched so that it was unable to overcome the barrier height of ∼27 kJ mol{sup −1} for the formation of CH{sub 3}CO from the CH{sub 3} + CO reaction; a barrierless channel for formation of a CH{sub 3}-CO complex was observed instead. This rapid quenching poses a limitation in production of free radicals via bimolecular reactions in p-H{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase-field modeling for restructuring in the dark zone of high burnup UO 2

This report summarizes the mesoscale modeling work performed in fiscal year 2024 under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program to capture the microstructural evolution and restructuring observed in the dark regions of high burnup UO 2 nuclear fuel. This is the first attempt to realistically simulate the restructuring behavior observed in different region of a high burnup fuel. We employ a grand-potential based phase-field model to concurrently evaluate the formation of subgrains and growth of fission bubbles within the fuel. A energy-based subgrain formation criteria is introduced to simulate the restructuring process. Effect of different initial conditions and different modeling parameters are studies systematically to capture how each of these parameters influence the characteristics of the restructured fuel. It is observed that the subgrain formation begins around existing fission gas bubbles and then proceeds towards triple junctions, grain boundaries and grain interiors. It is demonstrated that restructuring is influenced by a combination of initial dislocation densities, subgrain formation rate, and temperature. Rate of restructuring increases with increase in fuel temperature. A restructuring bias is observed within the microstructure due to variation in defect accumulation among different grains. Furthermore, bubble sizes and distribution does not have a significant effect on rate of restructuring. The predicted microstructures resembles the characteristics of the restructured regions as observed in experiments. Finally, a correlation is presented that demonstrates the evolution of the restructuring volume fraction as a function of local effective burnup. This work provides a first of its kind restructuring model for darkzone that can be used by BISON for performance prediction of high burnup UO 2 fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Tektite 2 habitability research program

Multi-level parameters relating to perceived life quality in an isolated research and residence quarters were measured using a variety of tests. The habitat under study, emplaced beneath the sea off the coast of St. John's Island as a part of the Tektite II program, was being used for marine research. The crew for each of the 10 missions consisted of one engineer and 4 scientists. One mission had an all-female crew. Mission length was either 14 or 20 days, and 4 engineers, in covering 6 missions, stayed in the habitat for periods of 30 days each. A personality test was taken before confinement in the habitat. Two attitude tests were filled out by the aquanauts while they were still in the habitat. Daily moods were monitored during all missions. Special observations were made of leisure time use. Standardized private debriefings were administered at the end of each mission to each aquanaut. Other behavioral observations made by another research team were intercorrelated with the other measures described above.

Nowlis, D. P.↗