Search NASA⌕ Search

SEARCH · Search NASA

Results for “obstacle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Unsteady vortical and entropic distortions of potential flows round arbitrary obstacles

The analysis concerns the alterations produced when small amplitude disturbances, including entropy and vorticity disturbances, are imposed on steady potential flows. For the most general nonacoustic incident distortion field that can be imposed on the uniform upstream flow, it is shown that the perturbation velocity at any point of the resulting unsteady compressible and vortical flow consists of a part that is a known function of the imposed upstream distortion field and the mean flow variables and a potential part that can be found by solving a linear inhomogeneous wave equation with a dipole-type source term whose strength is a known function of the imposed upstream distortion field. The theory is applied to the unsteady flow past a corner, and a closed-form analytical solution is found.

Goldstein, M. E.↗

International solar system exploration - Opportunities and obstacles

A review is conducted of the exploration of the solar system carried out with the aid of various types of spacecraft during the past two decades, taking into account also space missions planned for thy next few years. A wealth of information has been obtained regarding the planets and their satellites. However, there remain many important questions concerning the solar system, and a continuation of space exploration for the solution of these questions appears highly desirable, particularly when the comparatively little cost of these missions is taken into account. However, major fiscal limitations within the U.S. economy have led to pressure to postpone any new solar system exploration projects unless there can be major reductions in their cost. A special committee has been studying the options for future low-cost solar system exploration missions, giving attention also to some options for international implementation. Various aspects of joint space projects are examined.

Moore, J. W.↗

Supersonic separated flow past a cylindrical obstacle on a flat plate

An experimental investigation of three-dimensional boundary-layer separation on a flat plate ahead of a circular cylinder at Mach 2.36 was made. Emphasis was given to the laminar flow regime and to the flow region upstream of the cylinder. The heights and diameters of the cylinders used in the study were larger than the undisturbed boundary-layer thickness at the cylinder location. Data were obtained by oil flow visualization, Schlieren observations, static pressure measurements, and laser anemometry. Oil flow visualization revealed three separation lines on the flat plate ahead of the cylinder. A postulated flowfield structure, which was suggested by this skin-friction pattern, could not be confirmed by the velocity measurements. Velocity measurements indicated an unsteady flow structure.

Ozcan, O.↗

Mechanical obstacles to the movement of continent-bearing plates

Selected geophysical problems associated with the concept of continental drift as an incidental corollary of plate movement are discussed. The problems include the absence of a suitable plate-driving mechanism for plates with continental leading edges, the absence of the low-velocity zone under shields, and continental roots of 400 to 700 km depths. It is shown that if continental drift occurs, it must use mechanisms not now understood, or that it may not occur at all, plate movement being confined to ocean basins.

Lowman, P. D., Jr.↗

Obstacles to high fidelity multibody dynamics simulation

The authors take a wide ranging look at issues involved in the dynamic modeling of complex, multibodied orbiting space systems. The nature of the multibody problem is reviewed and capabilities and limitations of two major codes (DISCOS, TREETOPS) are assessed. Problem areas that limit accuracy or contribute to uncertainty in the modeling, simulation process are identified. As a specific case, the significance of including, or of not including, second-degree geometric nonlinearity in the elastic displacement field (foreshortening) is evaluated. Conclusions and recommendations are made concerning the direction future development should take to achieve higher-fidelity and more computationally efficient multibody software solutions.

Lips, K. W.↗

Optimal guidance with obstacle avoidance for nap-of-the-earth flight

The development of automatic guidance is discussed for helicopter Nap-of-the-Earth (NOE) and near-NOE flight. It deals with algorithm refinements relating to automated real-time flight path planning and to mission planning. With regard to path planning, it relates rotorcraft trajectory characteristics to the NOE computation scheme and addresses real-time computing issues and both ride quality issues and pilot-vehicle interfaces. The automated mission planning algorithm refinements include route optimization, automatic waypoint generation, interactive applications, and provisions for integrating the results into the real-time path planning software. A microcomputer based mission planning workstation was developed and is described. Further, the application of Defense Mapping Agency (DMA) digital terrain to both the mission planning workstation and to automatic guidance is both discussed and illustrated.

Pekelsma, Nicholas J.↗

Nonlinear stratified flow over localized topographic obstacles on Mars

The current dynamical influence of the Martian atmosphere on the surface is clearly revealed by dark surface albedo features which are associated with localized topographic relief and were described in detail and classified as Type I(d) wind streaks. The contrast of the streaks diminishes or disappears during the global dust storms, and the streaks are observed to quickly reform after the termination of the storms; the streaks remain stable after L(sub S) = 0 deg until the next dust storm. These observations, together with the ragged edges of the streaks, were used to infer that the dark streaks are formed by the removal of bright dust from a darker substrate.

Magalhaes, J. A.↗

An obstacle to building a time machine

Gott (1991) has shown that a spacetime with two infinite parallel cosmic strings passing each other with sufficient velocity contains closed timelike curves. An attempt to build such a time machine is discussed. Using the energy-momentum conservation laws in the equivalent (2 + 1)-dimensional theory, the spacetime representing the decay of one gravitating particle into two is explicitly constructed; there is never enough mass in an open universe to build the time machine from the products of decays of stationary particles. More generally, the Gott time machine cannot exist in any open (2 + 1)-dimensional universe for which the total momentum is timelike.

Carroll, Sean M.↗

The linear stability of a flat plate boundary-layer approaching a cylindrical obstacle

The linear stability of the low-speed three-dimensional flow over a flat plate with an attached cylinder is studied. The region of interest is upstream of the initial separation point and includes the effects of both adverse and favorable pressure gradients, as well as crossflow. The resulting boundary-layer is subject to both the Tollmien-Schlichting (TS) and crossflow instabilities. Linear stability calculations, using N-factor correlations, indicate that the transition process would be dominated by TS instabilities, although for low frequencies crossflow-type disturbances are important.

Spall, R. E.↗

Calculated effect of various types of flap on take-off over obstacles

In order to determine whether or not flaps could be expected to have any beneficial effect on take-off performance, the distances required to take off and climb to an altitude of 50 feet were calculated for hypothetical airplanes, corresponding to relatively high-speed types and equipped with several types of flap. The types considered are the Fowler wing, the Hall wing, the split flap, the balanced split flap, the plain flap, and the external-airfoil flap. The results indicate that substantial reductions in take-off distance are possible through the use of flaps, provided that the proper flap angle corresponding to a given set of conditions is used. The best flap angle for taking off varies inversely as power loading and, to a much smaller extent, varies inversely with wing loading. Apparently, the best take-off characteristics are provided by the type of device in which the flap forms an extension to the main wing as in the case of the Fowler wing and the external-airfoil flap.

Wetmore, J W↗

Aerodynamic heating and the deflection of drops by an obstacle in an air stream in relation to aircraft icing

Two topics of interest to persons attempting to apply the heat method of preventing ice formation on aircraft are considered. Surfaces moving through air at high speed are shown, both theoretically and experimentally, to be subject to important aerodynamic heating effects that will materially reduce the heat required to prevent ice. Numerical calculations of the path of water drops in an air stream around a circular cylinder are given. From these calculations, information is obtained on the percentage of the swept area cleared of drops.

Kantrowitz, Arthur↗

Planning Motions To Avoid Moving Obstacles

Method of planning motions of object to prevent collisions with other moving objects derived from concept of collision cones in relative-velocity space. Collision cones computed, then maneuvers chosen to avoid these cones. Method considered prototype of automated method of planning motions in diverse applications, including complex manufacturing tasks involving coordination of multiple robots and controlling land, air, and sea traffic.

Fiorini, Paolo↗