Search NASA⌕ Search

SEARCH · Search NASA

Results for “obtaining transport coefficients”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

137 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The role of B T -dependent flows on W accumulation at the edge of the confined plasma

Abstract Near-separatrix impurity accumulation between the crown and the outer midplane of tokamaks is a common feature in results from codes such as SOLPS-ITER and DIVIMP; however, experimental evidence of accumulation has only recently been obtained and is reported here. The codes find that the poloidal distribution of impurity ions in the scrape-off layer (SOL) depends primarily on toroidal field ( B T )-dependent parallel flow patterns of the background plasma and the parallel ion temperature gradient (∇ ‖ T ion ) force. Experimentally, Mach probes used in L-mode plasmas with favorable (for H-mode access) B T measure fast ( M ∼ 0.3–0.5) inner-target-directed (ITD) background plasma flows at the crown of single-null discharges. This study reports a set of DIVIMP simulations for two similar H-mode discharges from the DIII-D W metal rings campaign differing primarily in B T -direction to assess the effect that fast ITD flows have on the distribution of W ions in the SOL. It is found that for imposed ITD flows of M = 0.3, W ions that otherwise accumulate due to the ∇ ‖ T ion -force are largely flushed out. It is also found that doubling the radial diffusion coefficient from 0.3 to 0.6 m 2 s −1 prevents accumulation due to rapid cross-field transport into the far-SOL, where background plasma flows drain W ions to the divertors. Far-SOL W distributions from DIVIMP are then used to specify input to the impurity transport code 3DLIM, which is used to interpretively model collector probe (CP) deposition patterns measured in the ‘wall-SOL’. It is demonstrated that the deposition patterns are consistent with the DIVIMP predictions of near-SOL accumulation for the unfavorable- B T direction, and little/no accumulation for the favorable- B T direction. The wall-SOL CPs have thus provided the first experimental evidence, albeit indirect, of near-SOL W accumulation—finding it occurs for the unfavorable- B T direction only. For the favorable- B T direction, fast flows can largely prevent accumulation from occurring.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Thermal equation of state for zoisite: Implications for the transportation of water into the upper mantle and the high-velocity anomaly in the Farallon plate

Seismic tomography studies have revealed a high-velocity anomaly at depths between 100 km and 300 km in the Farallon plate. However, the reasons for the high-velocity anomaly continue to be debated. An analysis of the mineral proportions of eclogites exhumed from the Farallon plate shows that the average amount of zoisite in eclogite is ∼16.0 vol%. Therefore, the presence of zoisite eclogite needs to be considered to explain the high-velocity anomaly of the Farallon plate. However, the thermal equation of state and stability of zoisite have not been fully investigated under high pressure−temperature (P-T) conditions. We investigated the high-pressure and high-temperature behavior of natural zoisite utilizing synchrotron single crystal-X-ray diffraction (XRD). The results indicate that zoisite is metastable up to 24.8 GPa and 700 K. We obtained the ambient unit-cell volume V0 = 901.26(3) Å3 by synchrotron single crystal-XRD measurement. We also fitted the pressure-volume-temperature data to a high-temperature Birch-Murnaghan equation of state and obtained the zero-pressure bulk modulus K0 = 134.7(8) GPa, the temperature derivative of the bulk modulus (∂K/∂T)P = −0.011(4) GPa/K, and the thermal expansion coefficients α0V = 1.9(7) × 10−5 K−1 and α1V = 3(2) × 10−8 K−2 when the pressure derivative of bulk modulus (K′0) is fixed at 4. By incorporating the results from previous studies, we calculated the density and bulk sound velocity profiles of zoisite eclogite along the Farallon plate geotherm. Finally, we infer that zoisite could carry water to depths of ∼300 km within cold subducting slabs and that the bulk sound velocity of typical zoisite eclogite with ∼61.0 vol% omphacite, ∼23.0 vol% garnet, and ∼16.0 vol% zoisite could cause the high-velocity anomalies at depths of 100−300 km in the Farallon plate.

Geology↗
DOE OSTI2025

Identifying High Ionic Conductivity Compositions of Ionic Liquid Electrolytes Using Features of the Solvation Environment

Binary mixtures of ionic liquids with molecular solvents are gaining interest in electrochemical applications due to the improvement in their performance over neat ionic liquids. Dilution with suitable molecular solvents can reduce the viscosity and facilitate faster diffusion of ions, thereby yielding substantially higher ionic conductivity than that for a pure ionic liquid. Although viscosity and diffusion coefficients typically behave as monotonic functions of concentration, ionic conductivity often passes through a peak value at an optimum molar ratio of the molecular solvent to the ionic liquid. The ionic conductivity maximum is generally explained in terms of a balance between the ease of charge transport and the concentration of the charge carriers. In this work, fluctuation in the local environment surrounding an ion is invoked as a plausible explanation for the ionic conductivity mechanism with a binary mixture of 1-ethyl-3-methylimidazolium tetrafluoroborate and ethylene glycol as an example. The magnitude of the dynamism in the local environment is captured by measuring the spatial and temporal features of the solvation environment. Standard deviation in the number of ions in the solvation environment serves as a spatial feature, while the cage correlation lifetimes for oppositely charged ions within the first solvation shell serve as a temporal feature. Large standard deviations in the cluster ion population and short cage correlation lifetimes are indicators of highly dynamic ionic environment at the molecular level and consequently yield high ionic conductivity. Such compositions were found to be in good agreement with the optimum ionic liquid mole fractions obtained through experimental measurement. Short cage correlation lifetimes enable the identification of optimum mixture compositions using simulation trajectories significantly shorter than those required to implement the Nernst–Einstein or Einstein formalisms for calculating ionic conductivity. We validated the applicability of this approach across force fields and in six ionic liquid-molecular solvent electrolytes formed with combination of cations, anions, and solvents. We offer a computationally efficient approach of screening ionic liquid-molecular solvent binary mixture electrolytes to identify molar ratios that yield high ionic conductivity.

25 ENERGY STORAGE↗
DOE OSTI2022

Epitaxial growth, magnetoresistance, and electronic band structure of GdSb magnetic semimetal films

Motivated by observations of extreme magnetoresistance (XMR) in bulk crystals of rare-earth monopnictide (RE-V) compounds and emerging applications in novel spintronic and plasmonic devices based on thin-film semimetals, we have investigated the electronic band structure and transport behavior of epitaxial GdSb thin films grown on III-V semiconductor surfaces. The Gd 3 + ion in GdSb has a high spin S=7/2 and no orbital angular momentum, serving as a model system for studying the effects of antiferromagnetic order and strong exchange coupling on the resulting Fermi surface and magnetotransport properties of RE-Vs. Here, we present a surface and structural characterization study mapping the optimal synthesis window of thin epitaxial GdSb films grown on III-V lattice-matched buffer layers via molecular-beam epitaxy. To determine the factors limiting XMR in RE-V thin films and provide a benchmark for band-structure predictions of topological phases of RE-Vs, the electronic band structure of GdSb thin films is studied, comparing carrier densities extracted from magnetotransport, angle-resolved photoemission spectroscopy (ARPES), and density-functional theory (DFT) calculations. ARPES shows a hole-carrier rich, topologically trivial, semimetallic band structure close to complete electron-hole compensation, with quantum confinement effects in the thin films observed through the presence of quantum-well states. DFT-predicted Fermi wave vectors are in excellent agreement with values obtained from quantum oscillations observed in magnetic field-dependent resistivity measurements. An electron-rich Hall coefficient is measured despite the higher hole-carrier density, attributed to the higher electron Hall mobility. The carrier mobilities are limited by surface and interface scattering, resulting in lower magnetoresistance than that measured for bulk crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Model study of the energy dependence of the correlation between anisotropic flow and the mean transverse momentum in Au + Au collisions

A hybrid model that employs the hadron-string transport model UrQMD and the (3+1)-dimensional relativistic viscous hydrodynamic code vHLLE, is used to investigate the beam energy dependence of the correlation coefficient ρ(v$^{2}_{2}$,[p T ]) between the average transverse momentum [p T ] of hadrons emitted in an event and the square of the anisotropic flow coefficient v$^{2}_{2}$. For Au+Au collisions, the model predicts characteristic patterns for the energy and event-shape dependence of the variances for [p T ] and v$^{2}_{n}$ [Var([p T ] and Var(v$^{2}_{2}$)], and the covariance of v$^{2}_{n}$ and [p T ][cov(v$^{2}_{2}$,[p T ])], consistent with the attenuation effects of the specific shear viscosity η/s. Here in contrast, ρ(v$^{2}_{2}$,[p T ]) is predicted to be insensitive to the beam energy but sensitive to the initial-state geometry of the collisions. These observations suggest that a precise set of measurements for Var([p T ]), Var(v$^{2}_{2}$), cov(v$^{2}_{2}$,[p T ]) and ρ(v$^{2}_{2}$,[p T ]) as a function of beam energy and event shape, could serve to constrain better the eccentricities and their fluctuations over the entire span of beam energies, and consequently aid precision extraction of the temperature and baryon chemical-potential dependence of η/s from the wealth of Au+Au data obtained in the RHIC beam energy scan.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

J/ ψ elliptic and triangular flow in Pb-Pb collisions at \( \sqrt{s_{\mathrm{NN}}} \) = 5 . 02 TeV

The inclusive J/ ψ elliptic ( v 2 ) and triangular ( v 3 ) flow coefficients measured at forward rapidity (2 . 5 < y < 4) and the v 2 measured at midrapidity (| y | < 0 . 9) in Pb-Pb collisions at \( \sqrt{s_{\mathrm{NN}}} \) = 5 . 02 TeV using the ALICE detector at the LHC are reported. The entire Pb-Pb data sample collected during Run 2 is employed, amounting to an integrated luminosity of 750 μ b – 1 at forward rapidity and 93 μ b – 1 at midrapidity. The results are obtained using the scalar product method and are reported as a function of transverse momentum p T and collision centrality. At midrapidity, the J/ ψ v 2 is in agreement with the forward rapidity measurement. The centrality averaged results indicate a positive J/ ψ v 3 with a significance of more than 5 σ at forward rapidity in the p T range 2 < p T < 5 GeV/ c . The forward rapidity v 2 , v 3 , and v 3 /v 2 results at low and intermediate p T ( p T ≲ 8 GeV/ c ) exhibit a mass hierarchy when compared to pions and D mesons, while converging into a species-independent curve at higher p T . At low and intermediate p T , the results could be interpreted in terms of a later thermalization of charm quarks compared to light quarks, while at high p T , path-length dependent effects seem to dominate. The J/ ψ v 2 measurements are further compared to a microscopic transport model calculation. Using a simplified extension of the quark scaling approach involving both light and charm quark flow components, it is shown that the D-meson v n measurements can be described based on those for charged pions and J/ ψ flow.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

MOSCATO Development and Integration in Fiscal Year 2022

During FY21, we conducted ongoing development work for the MOSCATO (Molten Salt Chemistry and Transport) solver. The code development work primarily consisted of transitioning capabilities from the original version of the solver, which was written in OpenFOAM, into Nek5000. In doing so, a fast, highly parallelizable solver was created that is capable of complex chemistry and corrosion simulations for engineering-scale molten salt systems. The Nek5000 version of MOSCATO is now fully featured and capable of higher-fidelity simulations than were previously possible. Demonstration cases including a thermal convection loop have been simulated to test these new capabilities. We built upon the work for FY22 and improved the code from several different perspectives. First, we improved the user interface by adding a new component to the official Nek5000 input file (.par). This new part contains documents parameters like, salt properties (density, viscosity, Cp, thermal conductivity), diffusion coefficients, standard potential, etc. Second, we built a conversion script to extract salt properties from the MSTDB-TP salt database and write to MOSCATO input file. Third, we migrated the code to NekRS, which is the GPU branch of Nek5000 and suitable for next generation supercomputers. Verification and Validation (V&V) work was also continued in FY22. Two tasks were performed. The first V&V task involved the validation of the Poisson-Nernst-Planck equation solver and Butler-Volmer electrode kinetics, by comparing with numerical and experimental data about thermoelectric cells. The second task involved the comparisons to corrosion results from a thermal convection loop run during the MSRE era. Satisfactory agreement was obtained from both tasks.

Yuan, Haomin↗
DOE OSTI2020

Observation of an Unexpected n -Type Semiconducting Behavior in the New Ternary Zintl Phase Eu 3 InAs 3

The ternary arsenides Eu 3 InAs 3 and Sr 3 InAs 3 have been obtained by reactions of the elements in In flux at 1373 K. Structure elucidation by single-crystal X-ray diffraction reveals that Eu 3 InAs 3 and Sr 3 InAs 3 adopt the same orthorhombic structure (space group Pnma, Z = 4, Ca 3 AlAs 3 structure type) with unit cell parameters a = 12.9179(9) Å, b = 4.3990(3) Å, c = 13.9337(10) Å and a = 13.0218(11) Å, b = 4.4364(4) Å, c = 14.1339(12) Å, respectively. The structure consists of linear chains of corner-sharing InAs4 tetrahedra, [InAs 2 As 2/2 ] 6– , and Eu 2+ /Sr 2+ cations. Therefore, both Eu 3 InAs 3 and Sr 3 InAs 3 are valence-precise Zintl phases. As expected from the closed-shell electronic configurations, semiconducting behavior is confirmed by resistivity measurements on single crystals for both and by electronic band structure calculations for Sr 3 InAs 3 . The temperature dependence of resistivity and the computational work are in agreement that Eu 3 InAs 3 and Sr 3 InAs 3 are intrinsic semiconductors with narrow band gaps. Thermopower measurement on single-crystalline samples of Eu 3 InAs 3 shows that in the whole measured temperature range, from 300 to 700 K, the values for the Seebeck coefficient are negative. The observation of a negative Seebeck coefficient with very large absolute value (>400–500 μV K –1 at 700 K) is unexpected among the Zintl phases and suggestive that electrons are the majority charge carriers. Such a rare, n-type charge transport in an undoped compound such as Eu 3 InAs 3 , a material that has not been purposely optimized, could indicate native “defect” chemistry, and not extrinsic doping, as a reason for the unusual behavior. Here, a possible explanation involves a mixed-valent Eu 2+ /Eu 3+ state, which might be inferred from the measured effective paramagnetic moment of 7.2 μB per Eu atom, which is lower than the theoretically predicted value for free-ion moment of 7.9 μ B /Eu.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Molecular Modeling and Molecular Dynamics Simulation of a Packed and Intact Bacterial Microcompartment

Bacterial microcompartments (BMCs) are protein-bound organelles found in some bacteria which encapsulate enzymes for enhanced catalytic activity. These compartments spatially sequester enzymes within semipermeable shell proteins and are packed full of enzyme cargoes and metabolites as they fulfill their function. Coupling together recent SAXS and proteomics work, it is possible to develop molecular models for these microcompartments and interrogate enzyme and metabolite dynamics within. Our primary goal of this study is to quantify the permeability of metabolite glyceraldehyde-3-phosphate (G3P) and dihydroxyacetone phosphate (DHAP) across the BMC shell through classical molecular dynamics simulation. The Haliangium ochraceum model of BMC shell (PDB: 6MZX) was used to model an intact BMC of approximately 10 million atoms. Working at this scale presented its own challenges in managing large data sets, with multiple challenges and hardware advances discussed that facilitated this work. Over approximately 750 ns of aggregate simulation, we see multiple permeation events for these metabolites that were added at high concentration through the pores present within BMC shell tiles. When compared to independent permeability estimates for the same metabolites determined through replica exchange umbrella sampling simulations, the permeabilities varied by approximately 3 orders of magnitude. Regardless, the permeability coefficients for both G3P and DHAP are highly similar and very high, such that only very small concentration gradients can be maintained across the BMC shell between the cytosol and BMC interior. The large simulation systems also facilitated comparisons for molecular diffusivity in the crowded environment within the BMC shell. By our estimates, the viscosity within a packed BMC shell is at least 10-fold higher than it would be in neat solution and is the real driver for varying permeability estimates we obtained through simulation. These findings will be used as design inputs for future bioengineering efforts to make products from BMCs, highlighting how permeable BMC shells can be.

Diffusion↗
DOE OSTI2023

Halide Substitution Effects on Lithium-Ion Diffusion in Protonated Antiperovskites

Solid-state electrolytes (SSEs) for all-solid-state lithium-ion batteries are generating intense interest because these batteries can improve the safety and performance compared with devices fabricated with conventional, flammable liquid electrolytes. In these SSEs, it has been suggested that Li + ion diffusion in the grain boundaries is hindered and is a critical determinant of the overall ionic conductivity (σ). However, Li + ion diffusivities in the grain (D G ) and the grain boundary (D GB ) are difficult to determine experimentally, with few techniques capable of distinguishing the individual contributions. Here, we distinguished the D G and D GB for the protonated lithium antiperovskites (pLiAPs) SSEs: Li 2 OHCl, Li 2 OHBr, Li 2 OHF 0.1 Cl 0.9 , Li 2 OHF 0.1 Br 0.9 , and Li 2 OHCl 0.3 7Br 0.63 . The measurements were obtained directly from 7 Li pulsed-field gradient nuclear magnetic resonance (PFG-NMR) at 353 K. The 7 Li PFG-NMR echo profiles were composed of two primary components with additional secondary oscillatory components – the so-called NMR diffraction phenomenon. The length scale separating the two main components corresponds to a diffusion length of ~1.7 µm, which is thought to be the average grain size (by diameter). The short-range (≤ 1.7 µm) diffusion component associated with D G (≈10 -11 m 2 /s) varied minimally with halide substitution, while the long-range (≥ 1.7 µm) component D GB (≈10 -12 to 10 -15 m 2 /s) was highly sensitive to the substitution of halides and closely correlated with s. In addition, from the comparison of the ratio D GB /D G to D t (the Li + ion diffusion coefficient estimated from the rotational correlation time, t c ), it was determined that the contribution of D G to σ is negligible; 0.01 ~ 0.04 in the pLiAPs studied here. Finally, these insights provide fundamental understanding of the halide substitution effects on Li + ion grain versus grain boundary diffusion, and suggest that careful engineering of the grain boundaries at the microscopic level is necessary to achieve high-performance pLiAP SSEs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Effective viscosities in a hydrodynamically expanding boost-invariant QCD plasma

Background: The near-equilibrium properties of a QCD plasma can be encoded into transport coefficients such as bulk and shear viscosity. In QCD, the ratio of these transport coefficients to entropy density, ζ/$\textit{s}$ and η/$\textit{s}$, depends nontrivially on the plasma's temperature. This is unlike in conformal systems where they take constant values such as η/$\textit{s}$ = 1/(4π). Purpose: In this work, we show that in a (0 + 1)D boost-invariant fluid with no transverse expansion, a temperature-dependent ζ/$\textit{s(T)}$ or η/$\textit{s(T)}$ can be described by an equivalent effective viscosity $\langleζ/s\rangle_{\text{eff}}$ or $\langleη/s\rangle_{\text{eff}}$. This effective viscosity combines the actual temperature-dependent ζ/$\textit{s(T)}$ or η/$\textit{s(T)}$ with the temperature profile of the fluid. Further, we extend the concept of effective viscosity in systems with transverse expansion and discuss how effective viscosities can be used to identify families of ζ/$\textit{s(T)}$ and η /$\textit{s(T)}$ that lead to similar hydrodynamic evolution. Methods: The Navier-Stokes relativistic hydrodynamic equations are used to provide a first definition of effective viscosity, in (0 + 1)D and (1 + 1)D. In the (0 + 1)D case, the analysis is extended to Israel-Stewart-type second-order hydrodynamics to clarify the effect of higher-order hydrodynamics corrections on the effective viscosity. Results: In a boost-invariant fluid with no transverse expansion [(0 + 1)D], the effective viscosity is expressed as a simple integral of ζ/$\textit{s(T)}$ or η/$\textit{s(T)}$ over temperature, with a weight determined by the speed of sound of the fluid. The result is general for any equation of state with a moderate temperature dependence of the speed of sound, including the QCD equation of state. This definition of effective viscosity can be used to identify infinite families of ζ/$\textit{s(T)}$ or η/$\textit{s(T)}$ that produce essentially indistinguishable temperature profiles. In a boost-invariant cylindrical system [(1 + 1)D], a similar definition of effective viscosity is obtained in terms of characteristic trajectories in time and transverse direction. This leads to an infinite number of constraints on an infinite functional space for ζ/$\textit{s(T)}$ and η/$\textit{s(T)}$. Realistic examples are presented by using a finite number of constraints on a finite functional space. Conclusions: The definition of effective viscosity in a (0 + 1)D system clarifies how infinite families of ζ/$\textit{s(T)}$ and η/$\textit{s(T)}$ can result in nearly identical hydrodynamic temperature profiles. By extending the study to a boost-invariant cylindrical [(1 + 1)D] fluid, we identify an approximate but more general definition of effective viscosity that highlights the potential and limits of the concept of effective viscosity in fluids with limited symmetries.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗