Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxidation catalysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

In Situ Analysis of Manganese Antimonate Oxygen Evolution Electrocatalysts via Ambient Pressure X-ray Photoelectron Spectroscopy

Here, manganese antimonates are earth-abundant potential alternatives to precious metal catalysts for the oxygen-evolution reaction (OER). Herein, X-ray photoelectron spectroscopy was used to determine the surface chemistry of a manganese antimonate catalyst for the OER under ultra-high vacuum, ambient pressure, and in situ reaction conditions. Ex situ and in situ analysis revealed the oxidation states of surficial species as a function of material stoichiometry, water content, and applied potential. In situ XPS measurements in 1.0 M KOH(aq) indicated that relative to the rest state, the surface Mn(III) partially oxidized while effecting the OER, with approximately 15% of the Mn signal attributable to Mn(IV) and the remainder attributable to Mn(III).

36 MATERIALS SCIENCE↗
DOE OSTI2020

Near-Surface Imaging of the Multicomponent Gas Phase above a Silver Catalyst during Partial Oxidation of Methanol

Fundamental chemistry in heterogeneous catalysis is increasingly explored using operando techniques in order to address the pressure gap between ultrahigh vacuum studies and practical operating pressures. Because most operando experiments focus on the surface and surface-bound species, there is a knowledge gap of the near-surface gas phase and the fundamental information the properties of this region convey about catalytic mechanisms. In this work, we demonstrate in situ visualization and measurement of gas-phase species and temperature distributions in operando catalysis experiments using complementary near-surface optical and mass spectrometry techniques. The partial oxidation of methanol over a silver catalyst demonstrates the value of these diagnostic techniques at 600 Torr (800 mbar) pressure and temperatures from 150 to 410 °C. Planar laser-induced fluorescence provides two-dimensional images of the formaldehyde product distribution that show the development of the boundary layer above the catalyst under different flow conditions. Raman scattering imaging provides measurements of a wide range of major species, such as methanol, oxygen, nitrogen, formaldehyde, and water vapor. Near-surface molecular beam mass spectrometry enables simultaneous detection of all species using a gas sampling probe. Detection of gas-phase free radicals, such as CH 3 and CH 3 O, and of minor products, such as acetaldehyde, dimethyl ether, and methyl formate, provides insights into catalytic mechanisms of the partial oxidation of methanol. The combination of these techniques provides a detailed picture of the coupling between the gas phase and surface in heterogeneous catalysis and enables parametric studies under different operating conditions, which will enhance our ability to constrain microkinetic models of heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Catalysts Prepared from Atomically Dispersed Ce(III) on MgO Rival Bulk Ceria for CO Oxidation

Atomically dispersed cerium catalysts on an inert, crystalline MgO powder support were prepared by using both Ce(III) and Ce(IV) precursors. The materials were used as catalysts for CO oxidation in a once-through flow reactor and characterized by atomic-resolution scanning transmission electron microscopy, X-ray absorption near edge structure spectroscopy, X-ray photoelectron spectroscopy, and temperature-programmed reduction, among other techniques, before and after catalysis. The most active catalysts, formed from the precursor incorporating Ce(III), displayed a performance similar to that reported for bulk ceria under comparable conditions. The catalyst provided stable time-on-stream performance for as long as it was kept on stream, two days, increasing slightly in activity as the atomically dispersed cerium ions were transformed into ceria nanodomains represented as CeO x and having increased reducibility on the MgO support. Furthermore, the results suggest how highly dispersed supported ceria catalysts with low cerium loadings can be prepared and may pave the way to improved efficiencies of cerium utilization in oxidation catalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Photo–thermo Catalytic Oxidation over a TiO 2 -WO 3 -Supported Platinum Catalyst

Photo–thermo catalysis, which integrates photocatalysis on semiconductors with thermocatalysis on supported nonplasmonic metals, has emerged as an attractive approach to improve catalytic performance. However, an understanding of the mechanisms in operation is missing from both the thermo- and photocatalytic perspectives. Deep insights into photo–thermo catalysis are achieved via the catalytic oxidation of propane (C 3 H 8 ) over a Pt/TiO 2 -WO 3 catalyst that severely suffers from oxygen poisoning at high O 2 /C 3 H 8 ratios. After introducing UV/Vis light, the reaction temperature required to achieve 70 % conversion of C 3 H 8 lowers to a record-breaking 90 °C from 324 °C and the apparent activation energy drops from 130 kJ mol -1 to 11 kJ mol -1 . Furthermore, the reaction order of O 2 is -1.4 in dark but reverses to 0.1 under light, thereby suppressing oxygen poisoning of the Pt catalyst. An underlying mechanism is proposed based on direct evidence of the in-situ-captured reaction intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Characterization, Structure, and Reactivity of Hydroxyl Groups on Metal‐Oxide Cluster Nodes of Metal–Organic Frameworks: Structural Diversity and Keys to Reactivity and Catalysis

Among the most stable metal–organic frameworks (MOFs) are those incorporating nodes that are metal oxide clusters with frames such as Zr 6 O 8 . This review is a summary of the structure, bonding, and reactivity of MOF node hydroxyl groups, emphasizing those bonded to nodes containing aluminum and zirconium ions. Hydroxyl groups are often present on these nodes, sometimes balancing the charges of the metal ions. They arise during MOF syntheses in aqueous media or in post-synthesis treatments. They are identified with infrared and 1 H nuclear magnetic resonance spectroscopies and characterized by their reactivities with polar compounds such as alcohols. Terminal OH, paired µ 2 -OH, and aqua groups on nodes are catalytic sites in numerous reactions. Relatively unreactive hydroxyl groups (such as isolated µ 2 -OH groups) may replace reactive groups and inhibit catalysis; some node hydroxyl groups (e.g., µ 3 -OH) are mere spectators in catalysis. There are similarities between MOF node hydroxyl groups and those on the surfaces of bulk metal oxides, zeolites, and enzymes, but the comparisons are mostly inexact, and much remains to be understood about MOF node hydroxyl group chemistry. It is posited that understanding and controlling this chemistry will lead to tailored MOFs and improved adsorbents and catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Macroscopic and microscopic behaviors of Mn(II) (ad)sorption to goethite with the effects of dissolved carbonates under anoxic conditions

Manganese and its compounds have been extensively researched because of their far-reaching roles in a wide range of biogeochemical processes in natural systems. The (ad)sorption behavior of Mn(II), however, is poorly understood despite its important role as the primary reaction step for surface-catalyzed Mn(II) oxidation that is the principal abiotic process forming various Mn (oxyhydr)oxides in nature. Here, we systematically examined Mn(II) (ad)sorption to one of the most common natural sorbents, goethite, in oxygen- and carbonate-free systems. Traditional sorption edge and isotherm experiments were conducted by varying sorbate-to-sorbent ratio (0.027–15 μmol∙m -2 ) and solution pH (pH 5.0–9.0). The effects of dissolved carbonates on Mn(II) sorption were also assessed in a range of naturally prevalent concentrations (0.5–10 mM NaHCO 3 ). The Mn(II) uptake on goethite followed a typical Langmuir isotherm in the absence of dissolved carbonates, with increasing maximum adsorption capacities (Γ max ) from 0.19 at pH 6.5 to 3.4 μmol∙m -2 at pH 9.0. The presence of dissolved carbonates raised the extent of Mn(II) adsorption, which appeared to be directly correspondent to that of the adsorption of dissolved carbonates. Extended X-ray absorption fine structure (EXAFS) analysis indicated that Mn(II) predominantly formed inner-sphere binuclear bidentate surface complexes. Mn(II) uptake became deviated from the Langmuir model and showed a clear indication of surface precipitation when the Mn(II) sorption density (Γ) exceeded a threshold value in a given solution composition. This secondary Mn(II) phase was identified as rhodochrosite using X-ray diffraction (XRD) and transmission electron microscope (TEM). Furthermore, it would be plausible that a minor fraction of adsorbed Mn(II) coexisted with the secondary rhodochrosite according to a linear combination fitting (LCF) of the X-ray absorption near edge structure (XANES) spectra of Mn reference and samples. These systematic investigations of the macroscopic and microscopic behaviors of Mn(II) (ad)sorption to goethite provide a critical avenue for disentangling surface-catalytic Mn(II) oxidation processes, which ultimately lead to the formation of diverse Mn (oxyhydr)oxides in the environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Photo–thermo Catalytic Oxidation over a TiO 2 ‐WO 3 ‐Supported Platinum Catalyst

Abstract Photo–thermo catalysis, which integrates photocatalysis on semiconductors with thermocatalysis on supported nonplasmonic metals, has emerged as an attractive approach to improve catalytic performance. However, an understanding of the mechanisms in operation is missing from both the thermo‐ and photocatalytic perspectives. Deep insights into photo–thermo catalysis are achieved via the catalytic oxidation of propane (C 3 H 8 ) over a Pt/TiO 2 ‐WO 3 catalyst that severely suffers from oxygen poisoning at high O 2 /C 3 H 8 ratios. After introducing UV/Vis light, the reaction temperature required to achieve 70 % conversion of C 3 H 8 lowers to a record‐breaking 90 °C from 324 °C and the apparent activation energy drops from 130 kJ mol −1 to 11 kJ mol −1 . Furthermore, the reaction order of O 2 is −1.4 in dark but reverses to 0.1 under light, thereby suppressing oxygen poisoning of the Pt catalyst. An underlying mechanism is proposed based on direct evidence of the in‐situ‐captured reaction intermediates.

Kang, Leilei↗
DOE OSTI2021

Nanoparticle O–H Bond Dissociation Free Energies from Equilibrium Measurements of Cerium Oxide Colloids

A novel equilibrium strategy for measuring the hydrogen atom affinity of colloidal metal oxide nanoparticles is presented. Reactions between oleate-capped cerium oxide nanoparticle colloids (nanoceria) and organic proton-coupled electron transfer (PCET) reagents are used as a model system. Nanoceria redox changes, or hydrogen loadings, and overall reaction stoichiometries were followed by both 1 H NMR and X-ray absorption near-edge spectroscopies. Furthermore, these investigations revealed that, in many cases, reactions between nanoceria and PCET reagents reach equilibrium states with good mass balance. Each equilibrium state is a direct measure of the bond strength, or bond dissociation free energy (BDFE), between nanoceria and hydrogen. Further studies, including those with larger nanoceria, indicated that the relevant bond is a surface O–H. Thus, we have measured surface O–H BDFEs for nanoceria—the first experimental BDFEs for any nanoscale metal oxide. Remarkably, the measured CeO–H BDFEs span 13 kcal mol –1 (0.56 eV) with changes in the average redox state of the nanoceria colloid. Possible chemical models for this strong dependence are discussed. We propose that the tunability of ceria BDFEs may be important in explaining its effectiveness in catalysis. More generally, metal oxide BDFEs have been used as predictors of catalyst efficacy that, traditionally, have only been accessible by computational methods. These results provide important experimental benchmarks for metal oxide BDFEs and demonstrate that the concepts of molecular bond strength thermochemistry can be applied to nanoscale materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mechanistic Investigation of Enhanced Catalytic Selectivity toward Alcohol Oxidation with Ce Oxysulfate Clusters

Ceria-based materials have been highly desired in photocatalytic reactions due to their easily redox property and strong oxygen storage and transfer ability. Herein, we report the structures of one CeCe 70 oxysulfate cluster and four MCe 70 clusters (M = Cu, Ni, Co, Fe) with the same Ce 70 core. As noted, single crystal X-ray diffraction confirmed the structures of CeCe 70 and the MCe 70 series, while Raman spectroscopy indicated an increase in oxygen defects upon the introduction of Cu and Fe ions. The clusters catalyzed the oxidation of 4-methoxybenzyl alcohol under ultraviolet light. CuCe 70 and FeCe 70 exhibited enhanced reactivity compared to CeCe 70 and improved aldehyde selectivity compared to control experiments. In comparison with their homogeneous congeners, the CeCe 70 /MCe 70 clusters altered the location of radical generation from the bulk solution to the clusters’ surfaces. Mechanistic studies highlight the role of oxygen defects and specific transition metal introduction for efficient photocatalysis. Furthermore, the mechanistic pathway in this study provides insight on how to select or design a highly selective catalyst for photocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Unraveling the adsorption-limited hydrogen oxidation reaction at palladium surface via in situ electron microscopy

Palladium (Pd) catalysts have been extensively studied for the direct synthesis of H 2 O through the hydrogen oxidation reaction at ambient conditions. This heterogeneous catalytic reaction not only holds considerable practical significance but also serves as a classical model for investigating fundamental mechanisms, including adsorption and reactions between adsorbates. Nonetheless, the governing mechanisms and kinetics of its intermediate reaction stages under varying gas conditions remain elusive. This is attributed to the intricate interplay between adsorption, atomic diffusion, and concurrent phase transformation of catalyst. Herein, the Pd-catalyzed, water-forming hydrogen oxidation is studied in situ, to investigate intermediate reaction stages via gas cell transmission electron microscopy. The dynamic behaviors of water generation, associated with reversible palladium hydride formation, are captured in real time with a nanoscale spatial resolution. Our findings suggest that the hydrogen oxidation rate catalyzed by Pd is significantly affected by the sequence in which gases are introduced. Through direct evidence of electron diffraction and density functional theory calculation, we demonstrate that the hydrogen oxidation rate is limited by precursors’ adsorption. These nanoscale insights help identify the optimal reaction conditions for Pd-catalyzed hydrogen oxidation, which has substantial implications for water production technologies. The developed understanding also advocates a broader exploration of analogous mechanisms in other metal-catalyzed reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Plasmonic Hot-Carrier Generation and Catalysis in Ti 3 C 2 O 2 from Real-Time TDDFT Simulations

Photoinduced hot electrons are central to plasmon-driven catalysis. Atomically thin Ti 3 C 2 O 2 , with high carrier density and broad optical absorption, offers a promising platform for plasmon-driven reactions. However, comprehensive investigations of its plasmon resonance, hot-carrier generation, and plasmonic catalytic performance remain limited. In this work, real-time time-dependent density functional theory (rt-TDDFT) was employed to study Ti 3 C 2 O 2 ’s plasmon excitation and hot-carrier generation from nonradiative plasmon damping. The temporal evolution of the dipole moment reveals plasmon resonance in Ti 3 C 2 O 2 , followed by strong plasmon damping that redistributes the stored energy to generate hot carriers. Ti 3 C 2 O 2 with low oxygen vacancy concentration (O v -Ti 3 C 2 O 2 ) exhibits plasmonic behavior resembling the pristine surface, and the plasmon-generated hot electrons can markedly reduce the dissociation barrier of CO 2 at the oxygen vacancy. These findings provide fundamental insights into the plasmonic properties of Ti 3 C 2 O 2 and how they drive its catalytic performance in surface reactions, which is valuable for advancing plasmon-driven catalysis.

CO2 reduction↗
DOE OSTI2024

Observing Chemical and Morphological Changes in a Cu@TiO x Core@Shell Catalyst: Impact of Reversible Metal-Oxide Interactions on CO 2 Activation and Hydrogenation

A combination of several in-situ techniques (XRD, XAS, AP-XPS, E-TEM) was used to explore links between the structural and chemical properties of a Cu@TiO x catalyst under CO 2 hydrogenation conditions. The active phase of the catalyst involved an inverse oxide/metal configuration, but the initial core@shell motif was disrupted during the pre-treatment in H 2 . As a consequence of strong metal-support interactions, the titania shell cracked and Cu particles migrated from the core to on top of the oxide with the simultaneous formation of a Cu-Ti-O x phase. The generated Cu particles had a diameter of 20-40 nm and were decorated by small clusters of TiO x (< 5 nm in size). Results of in-situ XAS and XRD and images of E-TEM showed a very dynamic system, where the inverse oxide/metal configuration promoted the reactivity of the system towards CO 2 and H 2 . At room temperature, CO 2 oxidized the Cu nanoparticles (CO 2,gas → CO gas + O oxide ) inducing a redistribution of the TiO x clusters and big modifications in catalyst surface morphology. The generated oxide overlayer disappeared at elevated temperatures (> 180 °C) upon exposure to H 2 , producing a transient surface that was very active for the reverse water-gas shift reaction (CO 2 + H 2 → CO + H 2 O) but was not stable at 250 °C. When oxidation and reduction occurred at the same time, under a mixture of CO 2 and H 2 , the surface structure evolved toward a dynamic equilibrium that strongly depended on the temperature. Neither CO 2 nor H 2 can be considered as passive reactants. In the Cu@TiO x system, morphological changes were linked to variations in the composition of metal-oxide interfaces which were reversible with temperature or chemical environment and affected the catalytic activity of the system. Finally, the present study illustrates the dynamic nature of phenomena associated with the trapping and conversion of CO 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2020

A Woven Supramolecular Metal‐Organic Framework Comprising a Ruthenium Bis(terpyridine) Complex and Cucurbit[8]uril: Enhanced Catalytic Activity toward Alcohol Oxidation

Abstract The self‐assembly of a diamondoid woven supramolecular metal–organic framework wSMOF‐1 has been achieved from intertwined [Ru(tpy) 2 ] 2+ (tpy=2,2′,6′,2′′‐terpyridine) complex M1 and cucurbit[8]uril (CB[8]) in water, where the intermolecular dimers formed by the appended aromatic arms of M1 are encapsulated in CB[8]. wSMOF‐1 exhibits ordered pore periodicity in both water and the solid state, as confirmed by a combination of 1 H NMR spectroscopy, UV‐vis absorption, isothermal titration calorimetry, dynamic light scattering, small angle X‐ray scattering and selected area electron diffraction experiments. The woven framework has a pore aperture of 2.1 nm, which allows for the free access of both secondary and primary alcohols and tert ‐butyl hydroperoxide (TBHP). Compared with the control molecule [Ru(tpy) 2 ]Cl 2 , the [Ru(tpy) 2 ] 2+ unit of wSMOF‐1 exhibits a remarkably higher heterogeneous catalysis activity for the oxidation of alcohols by TBHP in n ‐hexane. For the oxidation of 1‐phenylethan‐1‐ol, the yield of acetophenone was increased from 10 % to 95 %.

Zhang, Yun‐Chang↗
DOE OSTI2021

Moving from Fundamental Knowledge of Kinetics and Mechanisms on Surfaces to Prediction of Catalyst Performance in Reactors

Catalysis is defined by kinetics, but after over a century of catalyst development our kinetic and mechanistic knowledge governing real-world catalysis is still severely lacking. This Perspective considers how we can use the precise knowledge available from both theoretical and fundamental experimental techniques to understand and even predict catalytic performance under operational conditions. Here, we describe advances that link fundamental and "real-world" measurements, crucial elements required to successfully recreate a reaction network, and avenues which appear to offer viable routes to success.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mineral surface-catalyzed oxidation of Mn(II) by bromate: Implications for the occurrence of Mn oxides on Mars

The occurrence of manganese (Mn) oxides on Mars is believed to be an indicator of an O 2 -rich paleoenvironment of Mars because Mn oxides often form through the oxidation of Mn(II) by O 2 on the surface of Earth. An alternative formation pathway was recently proposed, in which Mn(II) is oxidized by bromate (BrO 3 - ), a common oxidant in contemporary Martian regolith. However, the oxidation of Mn(II) by bromate in solution is kinetically controlled and slow unless using very high concentrations (100 mM) of reactants that may be irrelevant to the conditions of Mars. We conducted laboratory simulations to determine whether iron (Fe) oxides (hematite and goethite) and a phyllosilicate (montmorillonite), abundant minerals on the surface of Mars, could catalyze the oxidation of Mn(II) by bromate. Hematite and goethite, but not montmorillonite, dramatically accelerated the oxidation with a low concentration (1 mM) of Mn(II) and bromate under various solution conditions. Further, the reaction system was autocatalytic with Fe oxides initiating the oxidation of Mn(II) at the early stage and the subsequent catalysis mainly provided by the Mn oxide products. In contrast to producing Mn(IV)O 2 only during the homogeneous oxidation of Mn(II) by bromate in solutions, the heterogeneous mineral-surface catalyzed oxidation resulted in a mixture of Mn(III)OOH and Mn(IV)O 2 phases. Mn(III)OOH was an intermediate product and can be further oxidized by bromate to Mn(IV)O 2 . The occurrence and accumulation of the intermediate product MnOOH can be attributed to its rapid formation due to surface-enhanced nucleation and growth on Fe oxide surfaces and to its higher resistance to oxidation by bromate than Mn(III) ions or clusters. Overall, mineralsurface catalyzed oxidation of Mn(II) by bromate is favorable from both thermodynamic and kinetic perspectives, and can be a major pathway for the occurrence of Mn oxides on Mars where microorganisms are lacking to catalyze the reaction. Our study further improves our understanding of the thermodynamic and kinetic controls on Mn(II) oxidation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Chemisorbed oxygen or surface oxides steer the selectivity in Pd electrocatalytic propene oxidation observed by operando Pd L-edge X-ray absorption spectroscopy

Controlled electrochemical oxidation of hydrocarbons to desired products is an attractive approach in catalysis. Here we study the electrochemical propene oxidation under operando conditions using Pd L-edge X-ray absorption spectroscopy (XAS) as a sensitive probe to elucidate surface processes occurring during catalysis. Together with ab initio multiple-scattering calculations, our XAS results enable assignment of characteristic changes of the Pd L-edge intensity and energy position in terms of a mechanistic understanding of the selective oxidation of propene. The results, supported by electrochemical density functional theory DFT simulations, show that in the potential range of 0.8–1.0 V vs. the reversible hydrogen electrode (RHE), selective oxidation of propene to acrolein and acrylic acid occurs on the metallic Pd surface. Here, these reactions are proposed to proceed via the Langmuir–Hinshelwood mechanism. In contrast, for the potential range of 1.1–1.3 V vs. RHE, selective oxidation of propene to propylene glycol takes place on a Pd oxide surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

AMPED EFRC: Alliance for Molecular PhotoElectrode Design for Solar Fuels

Inspired by natural photosynthesis, the mission of the AMPED EFRC was to develop the fundamental molecular basis for solar-driven water oxidation and carbon dioxide reduction catalysis with dye-sensitized photoelectrodes. From 2014-2022, the Center advanced the state-of-the-art in molecule-decorated photoanodes for water oxidation and broke new ground in the development of photocathodes for CO 2 reduction. A collaborative approach brought together experts in inorganic synthesis, organometallic catalysis, interfacial materials synthesis, photoelectrochemistry, and time-resolved dynamics to address by Grand Challenges in the 2007 DOE BESAC report. Since 2009, the UNC EFRC has published 314 peer-reviewed journal articles, and 2 book chapters. More specifically there were 146 peer-reviewed publications,1-146 during the 2014-20 funding cycle, with 80% supported solely by the EFRC, and about half resulting from collaborations among multiple PIs. Three major scientific research areas emerged from AMPED that are described below with details of the most impactful advances for solar energy research.

14 SOLAR ENERGY↗
DOE OSTI2025

A simplified CFD approach for modeling mass transport in catalytic open-cell foams

A simplified macroscopic CFD approach is presented to model mass transport including chemical reactions in washcoated open-cell foams. The foam is treated as a porous medium. Species conversion during chemical reactions is modeled using appropriate source terms based on reaction rate expressions and modified to account for the mass transport resistances occurring at the fluid-washcoat interfaces and within the washcoat layers. As example, the catalytic CO oxidation over platinum is studied. The simulation results show good agreement with experimental data from literature. A parametric study on washcoat parameters, such as thickness, tortuosity, porosity, and size, is carried out. Increasing the washcoat thickness from 5 to 100 µm or decreasing the tortuosity to porosity ratio from 5 to 20 decreases the CO conversion by 10 %. The proposed model is found to be reliable and has the advantage of lower computational cost, making it a suitable tool for foam-based catalytic reactor design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗