Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxidation kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Chemical kinetic modeling of propane oxidation behind shock waves

The stoichiometric combustion of propane behind incident shock waves was studied experimentally and analytically over a temperature range from 1700 K to 2600 K and a pressure range from 1.2 to 1.9 atm. Measurements of the concentrations of carbon monoxide (CO) and carbon dioxide (CO2) and the product of the oxygen atom and carbon dioxide concentrations (O)(CO) were made after passage of the incident shock wave. A kinetic mechanism was developed which, when used in a computer program for a flowing, reacting gas behind an incident shock wave predicted experimentally measured results quite well. Ignition delay times from the literature were also predicted quite well. The kinetic mechanism consisted of 59 individual kinetic steps.

Mclain, A. G.↗
NASA NTRSDate not supplied

Triple Oxygen Isotope Kinetics of Sulfate From Pyrite Oxidation

Sulfates from low temperature terrestrial and marine environments are out of equilibrium with their oxygen sources. Instead, oxygen isotope compositions of sulfate imply they are dominated by kinetic signatures of oxidative and reductive processes (Killingsworth et al., 2022) that are under-constrained compared to equilibrium effects (Hayles and Killingsworth, 2022). Consequently, the specific role of pyrite oxidation in setting the oxygen isotope composition of sulfate is also under-constrained. This scenario inhibits a more nuanced understanding of small variations in the oxygen isotopes of sulfate and their implications for tracing oxygen sources and sulfur cycle transformations, particularly in low-temperature relatively sulfate-limited freshwater systems such as rivers, lakes, aquifers, and mining-affected environments. To alleviate these knowledge gaps, we conduct pyrite oxidation experiments at time scales spanning minutes to years, analyze the triple oxygen isotope compositions (∆ 17 O and δ 18 O) of sulfate products, and interpret results using molecular modeling. Our preliminary results show isotopic relationships of 1) pyrite-derived sulfate ∆ 17 O reaching above the meteoric water line as its δ 18 O becomes lighter than water, and 2) sulfate ∆ 17 O and δ 18 O extending between water and O 2 . From these results we interpret a kinetic isotope effect between sulfate and water and mixing between sulfate end members containing most of their oxygen atoms from water and from O 2 .

Oxygen isotopes↗
NASA NTRS1981

Determination of a kinetic region in catalytic oxidation of carbon monoxide

The catalytic activity of cupric oxide activated with ceric oxide in a braod interval of volumetric velocities was investigated. It was determined that for practical catalysts used in the diffuse region, dilution of the active substance by an inert diluent increases the effectiveness of the catalysts.

Sultanov, M. Y.↗
NASA NTRS1998

Surface Area, and Oxidation Effects on Nitridation Kinetics of Silicon Powder Compacts

Commercially available silicon powders were wet-attrition-milled from 2 to 48 hr to achieve surface areas (SA's) ranging from 1.3 to 70 sq m/g. The surface area effects on the nitridation kinetics of silicon powder compacts were determined at 1250 or 1350 C for 4 hr. In addition, the influence of nitridation environment, and preoxidation on nitridation kinetics of a silicon powder of high surface area (approximately equals 63 sq m/g) was investigated. As the surface area increased, so did the percentage nitridation after 4 hr in N2 at 1250 or 1350 C. Silicon powders of high surface area (greater than 40 sq m/g) can be nitrided to greater than 70% at 1250 C in 4 hr. The nitridation kinetics of the high-surface-area powder compacts were significantly delayed by preoxidation treatment. Conversely, the nitridation environment had no significant influence on the nitridation kinetics of the same powder. Impurities present in the starting powder, and those accumulated during attrition milling, appeared to react with the silica layer on the surface of silicon particles to form a molten silicate layer, which provided a path for rapid diffusion of nitrogen and enhanced the nitridation kinetics of high surface area silicon powder.

Bhatt, R. T.↗
NASA NTRSDate not supplied

A Study of the Kinetics of the CO Oxidation Catalyst in a Human Spaceflight Fire Cartridges as a Method to Understand and Predict Performance

Fire Cartridges (FC) are an integral part of fire response on ISS, Orion and Gateway. When a pair of FCs are integrated with an Emergency Mask, they can be used to provide safe breathing air on these vehicles in a post-fire environment. The FCs have two primary mechanisms for removing contaminants from the air, an activated carbon (AC) bed which adsorbs the majority of fire byproducts, and a catalyst bed consisting of gold nanoparticles supported on iron oxide which oxidized CO to CO2 under near ambient conditions. While the FC catalyst has proven its ability to convert CO under relevant conditions, this paper attempts to address the apparent inconsistent performance of the catalyst seen in testing. Numerous variables effect the performance of the catalyst, including but not limited to: reaction environment, reactant gas composition, inert gas composition, catalyst age, and catalyst lot. This paper discusses the importance of these variables and attempts a fundamental mechanistic explanation for the effects of each variable. The fundamental mechanisms are then used to establish the magnitude of expected performance variability, which were validated against real test data of flight quality FCs.

Fire Cartridge↗
NASA NTRSDate not supplied

A Study of the Kinetics of the CO Oxidation Catalyst in a Human Spaceflight Fire Cartridges as a Method to Understand and Predict Performance

Fire Cartridges (FC) are an integral part of fire response on ISS, Orion and Gateway. When a pair of FCs are integrated with an Emergency Mask, they can be used to provide safe breathing air on these vehicles in a post-fire environment. The FCs have two primary mechanisms for removing contaminants from the air, an activated carbon (AC) bed which adsorbs the majority of fire byproducts, and a catalyst bed consisting of gold nanoparticles supported on iron oxide which oxidized CO to CO2 under near ambient conditions. While the FC catalyst has proven its ability to convert CO under relevant conditions, this paper attempts to address the apparent inconsistent performance of the catalyst seen in testing. Numerous variables effect the performance of the catalyst, including but not limited to: reaction environment, reactant gas composition, inert gas composition, catalyst age, and catalyst lot. This paper discusses the importance of these variables and attempts a fundamental mechanistic explanation for the effects of each variable. The fundamental mechanisms are then used to establish the magnitude of expected performance variability, which were validated against real test data of flight quality FCs.

Fire Cartridge↗
NASA NTRS1994

Heterogeneous photocatalytic oxidation of atmospheric trace contaminants

Research was conducted on: (1) design and construction of a continuous flow photoreactor to study oxidation of trace atmospheric contaminants; (2) kinetics of acetone oxidation including adsorption equilibrium, variation of oxidatiin rate with acetone concentration and water, and variation of rate and apparent quantum yield with light intensity, and (3) kinetics of butanol oxidation, including rate variations; and (4) kinetics of catalyst deactivation including deactivation rate, influence of dark conditions, and photocatalytic regeneration in alcohol-free air.

Ollis, David F.↗
NASA NTRS1994

Kinetic Study of Methyl Acetate Oxidation in a Pt/Al2O3 Fixed-Bed Reactor

To support technology development for future long-term missions, a metabolic simulator will be used in a closed chamber to test the functions of a Controlled Ecological Life Support System (CELSS). Methyl acetate (MA) was selected as the fuel because its metabolic respiratory quotient is near that of humans. A kinetic study of the catalytic oxidation of MA over Pt/Al203 was then conducted to support the design and operation of the simulator. Kinetic data were obtained as a conversion percentage of MA versus retention time. The reaction was studied at one atmosphere and temperatures from 220 to 340 deg. C. The inlet MA concentration was varied from 100 to 2000 ppm with retention times from 0.01 to 10 sec. A first-order rate law and a Langmuir-Hinshelwood rate equation were tested by nonlinear regression of the kinetic data to estimate rate constants in the rate law. Regression results of the L-H equation explain the kinetic data better than the results of the first-order rate law. A Taguchi experimental design was used to study the effects of temperature, retention time, and concentrations of MA, CO2, and O2 on the conversion of MA. Results indicate that temperature has greatest effect, followed by retention time, and finally MA concentration. It was further determined that the effects of CO2 and O2 concentrations, and the cross effects, are negligible.

Hoy, Michael↗
NASA NTRS1991

Heterogeneous photocatalytic oxidation of atmospheric trace contaminants

The following subject areas are covered: (1) design and construction of continuous flow photoreactor for study of oxidation of trace atmospheric contaminants; (2) establishment of kinetics of acetone oxidation including adsorption equilibration, variation of oxidation rate with acetone concentration and water (inhibitor), and variation of rate and apparent quantum yield with light intensity; (3) exploration of kinetics of butanol oxidation, including rate variation with concentration of butanol, and lack of inhibition by water; and (4) exploration of kinetics of catalyst deactivation during oxidation of butanol, including deactivation rate, influence of dark conditions, and establishment of photocatalytic regeneration of activity in alcohol-free air.

Ollis, David F.↗
NASA NTRS1975

Fretting of titanium at temperatures to 650 C in air

Fretting wear experiments were conducted on high-purity titanium at temperatures up to 650 C. Results indicate that up to about 500 C, the fretting wear increases with temperature. A further increase in the temperature up to 650 C results in decreasing fretting wear. This change in trend of fretting wear with temperature is shown to be associated with a change in oxidation rate. Additional experiments at 650 C showed a transmission from a low rate of fretting wear to a higher rate occurred after exposure to a number of fretting cycles; the number of cycles required to cause this transition was dependent on the normal load. Scanning electron microscopy studies revealed that this transition was marked by cracking and disruption of the surface oxide film. A model was proposed that coupled the oxidation rate kinetics of titanium at 650 C with the occurrence of wear at the surface of the oxide film.

Bill, R. C.↗
NASA NTRS1983

Kinetics and mechanism of the oxidation of S(IV) by ozone in aqueous solution with particular reference to SO2 conversion in nonurban tropospheric clouds

Results are presented from a laboratory study of the kinetics of the S(IV)-O3 reaction in aqueous solution, including measurements of the effects of UV radiation, dissolved transition metals, and an antioxidant (hydroquinone) on the rate. On the basis of the results, relative rates of S(IV) conversion by O3 in tropospheric cloud water are compared with those predicted for H2O2 and for O2. The reaction mechanism is discussed, with an outline given of the elements of a possible reaction scheme. Application of the rate constants obtained to SO2 conversion in cloud water predicts conversion rates by ozone to be competitive with those by H2O2 at pH above about 4.5 and to dominate at pH above about 5.5. It is pointed out that since these pH's are typical for nonurban tropospheric cloud water, ozone is a potentially important contributor to the overall oxidative conversion of SO2 to sulfate in the nonurban troposphere.

Maahs, H. G.↗
NASA NTRS1982

Kinetics and mechanism of the oxidation process of two-component Fe-Al alloys

The oxidation process of two-component Fe-Al alloys containing up to 7.2% Al and from 18 to 30% Al was studied. Kinetic measurements were conducted using the isothermal gravimetric method in the range of 1073-1223 K and 1073-1373 K for 50 hours. The methods used in studies of the mechanism of oxidation included: X-ray microanalysis, X-ray structural analysis, metallographic analysis and marker tests.

Przewlocka, H.↗
NASA NTRS1977

Anodic growth of niobium oxide

Report documents experimental examination of growth kinetics of niobium oxide, using current transient technique.

Davidson, M. C.↗