Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxidizing and reducing conditions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Oxidative degradation in polyethylene: the microscopic properties responsible for macroscopic weathering

Radiation-initiated crosslinking of polyethylene has proven to be an effective method of reducing creep and wear. This has allowed polyethylene to find widespread use in engineering and medical sectors where extreme conditions would otherwise cause it to degrade. However, despite their resilience, irradiated polyethylene products are still vulnerable to oxidative degradation in some long-term applications. A good deal of literature exists to discuss the effects that irradiation and oxidative degradation have on polyethylene’s mechanical properties, but not much literature exists to describe the microscopic properties that make irradiated polyethylene susceptible to this process. This review presents a micro-scale look at polyethylene’s morphology and chemistry, with the intention of describing which characteristics make the material more or less favorable for oxidation. By describing the factors that make irradiated polyethylene vulnerable to oxidation in the first place, the hope is to provide insight on how to mitigate oxidation in future applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Biological methane production and accumulation under sulfate-rich conditions at Cape Lookout Bight, NC

Introduction: Anaerobic oxidation of methane (AOM) is hypothesized to occur through reverse hydrogenotrophic methanogenesis in marine sediments because sulfate reducers pull hydrogen concentrations so low that reverse hydrogenotrophic methanogenesis is exergonic. If true, hydrogenotrophic methanogenesis can theoretically co-occur with sulfate reduction if the organic matter is so labile that fermenters produce more hydrogen than sulfate reducers can consume, causing hydrogen concentrations to rise. Finding accumulation of biologically-produced methane in sulfate-containing organic-rich sediments would therefore support the theory that AOM occurs through reverse hydrogenotrophic methanogenesis since it would signal the absence of net AOM in the presence of sulfate. Methods: 16S rRNA gene libraries were compared to geochemistry and incubations in high depth-resolution sediment cores collected from organic-rich Cape Lookout Bight, North Carolina. Results: We found that methane began to accumulate while sulfate is still abundant (6–8 mM). Methane-cycling archaea ANME-1, Methanosarciniales, and Methanomicrobiales also increased at these depths. Incubations showed that methane production in the upper 16 cm in sulfate-rich sediments was biotic since it could be inhibited by 2-bromoethanosulfonoic acid (BES). Discussion: We conclude that methanogens mediate biological methane production in these organic-rich sediments at sulfate concentrations that inhibit methanogenesis in sediments with less labile organic matter, and that methane accumulation and growth of methanogens can occur under these conditions as well. Our data supports the theory that H2 concentrations, rather than the cooccurrence of sulfate and methane, control whether methanogenesis or AOM via reverse hydrogenotrophic methanogenesis occurs. We hypothesize that the high amount of labile organic matter at this site prevents AOM, allowing methane accumulation when sulfate is low but still present in mM concentrations

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

A general strategy and a consolidated mechanism for low-methane hydrogenolysis of polyethylene over ruthenium

Polyethylene (PE) is one of the most environment-threatening plastic waste. Its Ru-catalyzed hydrogenolysis is rapid but produces too much methane. Here, in this study, low-density PE hydrogenolysis is performed at mild conditions and short times over Ru-doped zirconia catalysts (Ru-XZr, X = Ti, Nb, Ce, W, V, Mo, Fe) to determine low-methane catalysts. Methane is produced via direct terminal C-C scission and surface cascade of consecutive C-C scissions, with the latter sensitive to hydrogen availability and dominant in hydrogen-lean conditions. Reactivity studies, characterization and theory reveal that the most effective dopant oxides (W, V, and Mo) are intermediately reducible, as they store and supply extra hydrogen to Ru via reverse hydrogen spillover. This hydrogen readily hydrogenates and desorbs long alkyl surface intermediates that would otherwise produce cascade methane. Our proposed mechanism reconciles the low methane production achieved by increasing the hydrogen pressure or reducing the particle size and exposes the key selectivity descriptors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Transient kinetic insights into selective propene oxidation over industrial bismuth molybdate catalysts

Selective oxidation of propene to acrolein over industrial multicomponent bismuth molybdate (BMO) catalysts significantly depends on reaction conditions that include operating parameters and catalyst state. Here, this work investigates selective propene oxidation in the intrinsic kinetic paradigm of Temporal Analysis of Products (TAP) reactor by systematically varying catalyst redox state, temperature, and oxygen-to-propene feed ratio. A 93 % propene conversion with an acrolein yield of 80 % is achieved at elevated temperatures (450 °C) on oxidized catalysts under oxygen-rich conditions (O 2 :C 3 H 6 = 10). However, these conditions diminish acrolein-to-CO 2 selectivity due to enhanced total oxidation to CO 2 . In contrast, a reduced catalyst state, moderate temperature (350 °C), and lower oxygen feed (O 2 :C 3 H 6 = 1) nearly doubles the acrolein to-CO 2 selectivity, albeit at a lower acrolein yield (33 %). Transient kinetic studies together with a kinetic model that simplify the major product formation pathways in lumped non-elementary forms reveal that the availability of surface oxygen species plays a pivotal role in governing reaction pathways. Additionally, density functional theory (DFT) calculations on pure BMO catalysts inform the role of surface redox states on propene and oxygen activation barriers. Lattice oxygen at acrolein-selective sites drives both acrolein and CO 2 formation, while adsorbed oxygen at activation sites favors unselective CO 2 generation. This work establishes a critical relationship between transient product selectivity and surface oxygen availability, which is strongly influenced by catalyst redox state, feed ratio, and reaction temperature. These insights underscore the importance of dynamic reactor operation strategies and offer a foundation for designing next-generation propene oxidation processes with tunable acrolein selectivity.

42 - ENGINEERING↗
DOE OSTI2023

Rapid, Sensitive, Label-Free Electrical Detection of SARS-CoV-2 in Nasal Swab Samples

Rapid diagnosis of coronavirus disease 2019 (COVID-19) is key for the long-term control of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) amid renewed threats of mutated SARS-CoV-2 around the world. Here, we report on an electrical label-free detection of SARS-CoV-2 in nasopharyngeal swab samples directly collected from outpatients or in saliva-relevant conditions by using a remote floating-gate field-effect transistor (RFGFET) with a 2-dimensional reduced graphene oxide (rGO) sensing membrane. RFGFET sensors demonstrate rapid detection (<5 min), a 90.6% accuracy from 8 nasal swab samples measured by 4 different devices for each sample, and a coefficient of variation (CV) < 6%. Also, RFGFET sensors display a limit of detection (LOD) of pseudo-SARS-CoV-2 that is 10 000-fold lower than enzyme-linked immunosorbent assays, with a comparable LOD to that of reverse transcriptionpolymerase chain reaction (RT-PCR) for patient samples. To achieve this, comprehensive systematic studies were performed regarding interactions between SARS-CoV-2 and spike proteins, neutralizing antibodies, and angiotensin-converting enzyme 2, as either a biomarker (detection target) or a sensing probe (receptor) functionalized on the rGO sensing membrane. Finally, taken together, this work may have an immense effect on positioning FET bioelectronics for rapid SARS-CoV-2 diagnostics.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Controlling Oxidation of Nb in Oxygen Abundant Environments

Modern particle accelerators depend on Superconducting Radio Frequency (SRF) cavities made from high-purity niobium (Nb) to achieve optimal performance, including high quality factors and strong accelerating gradients. However, when exposed to air, niobium naturally forms a complex oxide layer that can introduce surface imperfections and carbon contamination. This work examines an alternative oxidation strategy under oxygen-rich conditions to better regulate the oxide formation process. The ultimate objective is to improve surface uniformity and cleanliness, thereby reducing defect density and enhancing performance. We used Confocal Microscopy, Scanning Electron Microscopy (SEM), and X-Ray Photoelectron Spectroscopy (XPS) to analyze surface changes. We used standard metrics, like Arithmetic Average Roughness (Ra) and Root Mean Square (Rq). Three oxidation methods were applied: short, extended, and a repeated HF and H₂O₂ oxidation process. Preliminary results show promising reductions in carbon contamination and surface defects.

Romero, Juan [Fermilab]↗
DOE OSTI2020

Reply to: How much does corrosion of nuclear waste matrices matter

We thank Mallants and Chapman for their comments on our recent work and are mostly in agreement. However, while the applicability of the results to different environmental conditions requires more attention, we maintain that this study could be relevant even to repositories in saturated reduced environments. Oxidants other than oxygen might be present in anoxic groundwater repository environments and could also trigger the corrosion mechanism we described. .

Guo, Xiaolei↗
DOE OSTI2025

Continuous Wet Air Oxidation of the Hydrothermal Liquefaction Aqueous Product from Various Wet Wastes

Wet air oxidation (WAO) offers an effective method for treating waste streams, converting pollutants into benign substances, and holds significant potential for processing the aqueous product from the hydrothermal liquefaction (HTL-AP) of wet wastes, a promising renewable fuel technology. Here, we conducted a comprehensive study of the WAO of HTL-AP from four different wet wastes. Through continuous testing under various conditions, we produced samples with different chemical oxygen demand (COD) levels, enhancing understanding of reaction parameters necessary for substantial COD reduction (>95%). Chemical analysis revealed that alcohols and ketones in the HTL-AP rapidly oxidized to acetic acid through aldehyde intermediates, while acetic acid, other carboxylic acids, and phenols oxidized relatively slowly. The light N-containing compounds were found to exhibit a change in concentration only after the whole sample reaches an 80% COD reduction, indicating their refractory nature under applied conditions. Energy released in the WAO reaction was calculated, and anaerobic toxicity assay demonstrated that WAO treatment enhanced methane production kinetics due to reduced inhibitory effects, suggesting partial oxidative transformation of inhibitory compounds into less toxic derivatives. These findings provide insights into designing effective WAO processes for valorizing HTL aqueous products, addressing key barriers to HTL process commercialization.

anaerobic digestion↗
DOE OSTI2020

Safety Testing and Destructive Examination of AGR-2 UO 2 Compact 3-1-1

Post-irradiation examination and elevated-temperature safety testing are being performed on compacts from the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program’s second irradiation experiment (AGR-2). The compacts in the AGR-2 irradiation experiment held either tristructural isotropic (TRISO)-coated particles containing uranium oxide fuel kernels (UO 2 ) or TRISO-coated particles containing fuel kernels with both uranium carbide and uranium oxide phases (UCO). In UO 2 TRISO particles, oxygen released by uranium fission can react with the surrounding carbon in the buffer layer to form carbon monoxide (CO). Excess CO can lead to various irradiation performance issues under certain operating conditions, such as pressure-induced fracture, kernel migration, and silicon carbide (SiC) corrosion. In UCO TRISO particles, CO formation is reduced because the chemical potential for oxidation of uranium carbide is lower than for oxidation of carbon.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Effect of sucrose on the oxidation-reduction conditions and retention of rhenium during vitrification of low-activity waste

Technetium speciation and solubility during nuclear waste vitrification are affected by oxygen partial pressure in the melt. Thus, reducing agents such as sucrose, which are routinely added to nuclear waste feeds to repress foaming, can significantly affect the volatilization of Tc and increase its retention in glass. Using Re as a surrogate for Tc, we measured the effect of sucrose addition to two low-activity waste melter feeds on the Re retention, oxygen partial pressure, and iron redox as functions of temperature. As expected, Re retention in glass increased as the sucrose content increased. Furthermore, this is attributed to sucrose reaction with nitrates and nitrites in the feed. Destruction of nitrates and nitrites reduces the salt phase fraction and thus likely promotes Re diffusion into the glass-forming melt. In agreement with available literature, we discuss that a modest increase in the sucrose content (compared to current practice) can significantly improve the Tc retention without reducing Fe 2+ to metal.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Exploring Atomic-Scale Interactions at the Interface of Reducible Oxide and Ruthenium Nanocatalyst for Ammonia Decomposition

Restructuring atomic-scale interfaces between noble metal nanoparticles and metal oxides provides a promising approach to enhancing catalytic properties. In this study, Ru nanoparticles were supported on CeO 2 , ZrO 2 , and HfO 2 via pyrolysis of MOFs under oxygen-suppressed high-temperature conditions. Despite its nearly ideal particle size (∼2.3 nm), the Ru–CeO 2 /C catalyst exhibited the lowest ammonia decomposition activity. X-ray absorption spectroscopy and DFT calculations revealed that electron transfer from Ru to CeO 2 formed positively charged Ru and partially reduced Ce 4+ , weakening the catalytic performance. In contrast, oxygen-deficient ZrO 2 and HfO 2 support donated electrons to Ru, preserving its metallic state. These findings demonstrate that the reducibility of oxide supports governs the direction and magnitude of interfacial charge transfer, directly tuning catalytic behavior. This study provides insights into the design of oxide-supported Ru catalysts for ammonia decomposition.

Catalysts↗
DOE OSTI2023

Respiration is essential for aerobic growth of Zymomonas mobilis ZM4

ABSTRACT Zymomonas mobilis is an alpha-proteobacterium that is a promising platform for industrial scale production of biofuels due to its efficient ethanol fermentation and low biomass generation. Z. mobilis is aerotolerant and encodes a complete respiratory electron transport chain, but the benefit of respiration for growth in oxic conditions has never been confirmed, despite decades of research. Growth and ethanol production of wild-type Z. mobilis is poor in oxic conditions indicating that it does not benefit from oxidative phosphorylation. Additionally, in previous studies, aerobic growth improved significantly when respiratory genes were disrupted ( ndh ) or acquired point mutations ( cydA and cydB ), even if respiration was significantly reduced by these changes. Here, we obtained clean deletions of respiratory genes ndh and cydAB , individually and in combination, and showed, for the first time, that deletion of cydAB completely inhibited O 2 respiration and dramatically reduced growth in oxic conditions. Both respiration and aerobic growth were restored by expressing a heterologous, water-forming NADH oxidase, noxE . Oxygen can have many negative effects, including formation of reactive oxygen species (ROS) or directly inactivating oxygen sensitive enzymes. Our results suggest that the effect of molecular oxygen on enzymes had a greater negative impact on Z. mobilis than formation of ROS. This result shows that the main role of the electron transport chain in Z. mobilis is reducing the intracellular concentration of molecular oxygen, helping to explain why it is beneficial for Z. mobilis to use electron transport chain complexes that have little capacity to contribute to oxidative phosphorylation. IMPORTANCE A key to producing next-generation biofuels is to engineer microbes that efficiently convert non-food materials into drop-in fuels, and to engineer microbes effectively, we must understand their metabolism thoroughly. Zymomonas mobilis is a bacterium that is a promising candidate biofuel producer, but its metabolism remains poorly understood, especially its metabolism when exposed to oxygen. Although Z. mobilis respires with oxygen, its aerobic growth is poor, and disruption of genes related to respiration counterintuitively improves aerobic growth. This unusual result has sparked decades of research and debate regarding the function of respiration in Z. mobilis . Here, we used a new set of mutants to determine that respiration is essential for aerobic growth and likely protects the cells from damage caused by oxygen. We conclude that the respiratory pathway of Z. mobilis should not be deleted from chassis strains for industrial production because this would yield a strain that is intolerant of oxygen, which is more difficult to manage in industrial settings.

09 BIOMASS FUELS↗
DOE OSTI2020

Establishing a Theoretical Landscape for Identifying Basal Plane Active 2D Metal Borides (MBenes) toward Nitrogen Electroreduction

Abstract To achieve efficient ammonia synthesis via electrochemical nitrogen reduction reaction (NRR), a qualified catalyst should have both high specific activity and large active surface area. However, integrating these two merits into one single material remains a big challenge due to the difficulty in balancing multiple reaction intermediates. Here, it is demonstrated that the boron‐analogues of MXenes, namely “MBenes”, could cope with the challenge and achieve the high activity and large reaction region simultaneously toward NRR. Using extensive density functional theory computations and taking 16 MBenes as representatives, it is identified that seven MBenes (CrB, MoB, WB, Mo 2 B, V 3 B 4 , CrMnB 2 , and CrFeB 2 ) not only have intrinsic basal plane activity for NRR with limiting potentials ranging from −0.22 to −0.82 V, but also possess superior capability of suppressing the competitive hydrogen evolution reaction. Particularly, different from the MXenes whose surface oxidation may block the active sites, once oxidized, these MBenes can catalyze NRR via the self‐activating process, reducing O*/OH* into H 2 O* under reaction conditions, and favoring the N 2 electroreduction. As a result, the exceptional activity and selectivity, high active area (≈10 19 m −2 ), and antioxidation nature render these MBenes as pH‐universal catalysts for NH 3 production without introducing any dopants and defects.

Guo, Xiangyu↗
DOE OSTI2022

The Fe 2 O 3 (0001) Surface Under Electroreduction Conditions: A DFT Study of L-Cysteine Adsorption

Local catalyst surface structure and environment can play a significant role towards catalytic activity and selectivity. Surface functionalization using organic additives, such as amino acid chains or peptides, can alter surface properties. Density Functional Theory calculations are used to evaluate the potential dependent surface stability of different terminations of the Fe 2 O 3 (0001) surface. Adsorption of L-Cysteine in different redox states and through different binding modes (carboxylic: O-Fe, amine: N-Fe and thiol: S-Fe) is evaluated. At moderate electrochemical reducing conditions, Fe 2 O 3 (0001) exposes a partially reduced termination with both surface H atoms and undercoordinated Fe atoms in the outermost layer. L-Cysteine adsorption occurs most preferentially through carboxylic acid, O-Fe, binding and does not significantly alter the relative surface stability of different surface terminations. A partially reduced surface with L-Cysteine functionalization will be stable under electroreduction conditions. As a result, stable functionalization of an oxide material through amino acid chains or peptide adsorption may provide an additional design lever to develop improved catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Copper and bismuth-based sorbent characterization in simulated iodine off-gas streams

The effective capture of volatile radioiodine, a fission product present in used nuclear fuel (UNF), is of paramount importance for development of used fuel reprocessing schemes to prevent release of radioiodine during unit operations and to meet regulatory standards for air emissions. A well-studied method for iodine capture in off-gas streams is the use of silver-functionalized zeolite phases (AgZ), which exploit chemisorption of I to Ag. Advances into other Ag-functionalized materials, including aerogels and metal organic frameworks (MOFs), are underway [1]. Additional metals with the capability to chemisorb iodine, including Cu, Bi, and Sn, [1] are being evaluated as alternatives to Ag for potential applicability to iodine management in off-gas systems. The design of novel functionalized sorbents with Cu and Bi, including composites with metal particles embedded in PAN substrates [2] and composites with metal sulfides embedded in PAN [3], is an ongoing area of study for improved iodine capture. Previously reported work on novel PAN-based metal sorbents has provided the synthesis, characterization, and iodine capture efficiency of this new class of sorbent. Specifically, the metal sulfide PAN composites are found to be easy to produce and reproduce, as well as having a high iodine loading potential under static conditions [3]. Due to the favorable testing previously performed with metal sulfide PAN composites, further testing into the performance of these composites under gas streams containing I2(g) in combination with NO2(g) and H2O(g) is needed. Humid streams of NO2(g) may arise from dissolver off-gas streams, when used fuel is dissolved in HNO3(aq) [4]. NO2(g) has been found to reduce AgZ sorption capacity for I because of oxidation of Ag, the chemisorbing agent, to Ag2O [5]. It follows that performance evaluation of novel sorbents under highly oxidizing conditions such as NO2(g) streams is critical. Therefore, the objective of this study is to determine the effect of flowing NO2(g) and H2O(g) streams on iodine sorption capacity and sorbent performance. This work utilizes custom-built gas handling capabilities for sorbent exposure along with solid-state characterization techniques to assess the physical and chemical properties of sorbents before and after exposure.

copper, bismuth, iodine capture, iodine sorbent, p↗
DOE OSTI2026

Effect of thermal treatments on electrochemical behavior of binder jetted 17-4 PH stainless steel

Binder jetted 17–4 PH stainless steel was post-processed to relate heat treatment, microstructure, and corrosion in 3.5 wt% NaCl. Specimens were sintered at 1380 or 1400 °C, solution-annealed at 1055 °C for 1 h, and aged at 482 °C for 1 h. Here, as-sintered parts showed α′-martensitic matrix with a δ-ferrite network and Cu-rich precipitates in ferrite; inclusions (MnS, NbC) promoted localized attack. solutionizing redistributed elements and reduced ferrite, while aging generated coherent Cu nano-precipitates. Corrosion resistance was highly sensitive to post-processing in which aged specimens exhibited the lowest corrosion current density and formed a thicker, stable Cr 2 O 3 -rich passive film, whereas sintered specimens degraded most. Pitting potential depended on sintering temperature and microstructure, with 1400 °C sintering yielding more positive pitting potentials and the best overall performance after aging. Although the 1400-solutionized condition showed a relatively noble pitting response versus 1380-solutionized, it displayed unstable corrosion kinetics attributed to an imperfect passive film linked to higher NbC density. XPS depth profiles corroborated these trends, showing thicker, more continuous Cr 2 O 3 in aged states and discontinuous/thinning oxides in less resistant conditions. Practically, high-temperature sintering (∼1400 °C) followed by solutionizing and aging is recommended, with further gains expected from reducing NbC/MnS populations and porosity via powder and process control.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Multiple injection for improving knock, gaseous and particulate matter emissions in direct injection SI engines

Advances in fuel injector technology have enabled research and development on a large variety of direct injection spark ignition (DISI) engine fueling strategies targeted to improve engine performance and reduce engine-out emissions. This study explores the effect of multiple injections on knock, engine efficiency and stability, and particulate number and gaseous emissions on a single-cylinder DISI research engine. Work to date on multiple injections in the literature is reviewed, and then two aspects of multiple injection strategies are experimentally investigated: the number of injections (up to five times in a cycle); and the timing of the injections (classified relative to the timing of intake valve opening and closing). A boosted, single-cylinder research engine equipped with a state-of-the-art piezoelectric hollow cone spray direct injector and research-grade E10 gasoline was used for the study. The results show multiple injections maintain torque and combustion stability compared with single injection and slightly increase the knock limits and indicated thermal efficiencies (maximum 0.7% absolute, 2.8% relative compared with single-injection baseline) due to improved heat release phasing, especially with an additional late injection during the intake valve closed (compression stroke) period. The gaseous pollutant emissions including nitrogen oxides and unburned hydrocarbons were reduced by 25% with multiple injections, particularly with injection during the compression stroke. In contrast, carbon monoxide emissions increased with multiple injections for all conditions. Increasing the number of injection events significantly reduced particulate number emissions (half with each additional injection), and the decrease in particulate number was not sensitive to the injection timing.

42 ENGINEERING↗