Search NASA⌕ Search

SEARCH · Search NASA

Results for “parallel codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Performance of a class of parallel spread-spectrum code acquisition schemes in the presence of data modulation

An acquisition procedure for data-modulated direct-sequence spread-spectrum systems is investigated. The correlation time is partitioned into subintervals, and the integration results in these subintervals are noncoherently combined for detection. The tradeoff between noncoherent combining loss and data modulation degradation guides the optimum choice of the number of subintervals. Two forms of data modulation are considered, namely, the alternate-data and random-data cases. The parallel acquisition schemes discussed allow multiple code-phase offsets to be examined at each test. The circular state diagram approach is used to analyze the performances of these schemes. The theory presented is valid for a class of such parallel schemes.

Cheng, Unjeng↗
NASA NTRS2016

Parallel Grand Canonical Monte Carlo (ParaGrandMC) Simulation Code

This report provides an overview of the Parallel Grand Canonical Monte Carlo (ParaGrandMC) simulation code. This is a highly scalable parallel FORTRAN code for simulating the thermodynamic evolution of metal alloy systems at the atomic level, and predicting the thermodynamic state, phase diagram, chemical composition and mechanical properties. The code is designed to simulate multi-component alloy systems, predict solid-state phase transformations such as austenite-martensite transformations, precipitate formation, recrystallization, capillary effects at interfaces, surface absorption, etc., which can aid the design of novel metallic alloys. While the software is mainly tailored for modeling metal alloys, it can also be used for other types of solid-state systems, and to some degree for liquid or gaseous systems, including multiphase systems forming solid-liquid-gas interfaces.

Vesselin I Yamakov↗
DOE OSTI2022

KokkACC: Enhancing Kokkos with OpenACC

Template metaprogramming is gaining popularity as a high-level solution for achieving performance portability on heterogeneous computing resources. Kokkos is a representative approach that offers programmers high-level abstractions for generic programming while most of the device-specific code generation and optimizations are delegated to the compiler through template specializations. For this, Kokkos provides a set of device-specific code specializations in multiple back ends, such as CUDA and HIP. Unlike CUDA or HIP, OpenACC is a high-level and directive-based programming model. This descriptive model allows developers to insert hints (pragmas) into their code that help the compiler to parallelize the code. The compiler is responsible for the transformation of the code, which is completely transparent to the programmer. This paper presents an OpenACC back end for Kokkos: KokkACC. As an alternative to Kokkos’s existing device-specific back ends, KokkACC is a multi-architecture back end providing a high-productivity programming environment enabled by OpenACC’s high-level and descriptive programming model. Moreover, we have observed competitive performance; in some cases, KokkACC is faster (up to 9×) than NVIDIA’s CUDA back end and much faster than OpenMP’s GPU offloading back end. This work also includes implementation details and a detailed performance study conducted with a set of mini-benchmarks (AXPY and DOT product) and three mini-apps (LULESH, miniFE and SNAP, a LAMMPS proxy mini-app).

Valero Lara, Pedro↗
DOE OSTI2021

RAPID

Parallel computer code for the simulator for dynamics of power systems which has the capability to initiate the system and create different faults for the dynamic analysis. The code is based on time-parallel method (Parareal) with Adaptive Method Reduction (AMR). The coarse solvers for the Parareal algorithm include several Semi Analytical Solution methods. Also, Integrated simulation of coupled transmission and distribution systems can be studied.

Simunovic, Srdjan [Oak Ridge National Lab. (ORNL),↗
DOE OSTI2026

Benchmarking of massively parallel phase-field codes for directional solidification

We present a detailed benchmark comparing two state-of-the-art phase-field implementations for simulating alloy solidification under experimentally relevant conditions. The study investigates the directional solidification of Al-3wt%Cu under high-velocity solidification conditions and SCN-0.46wt% camphor under microgravity conditions from National Aeronautics and Space Administration (NASA) DECLIC-DSI-R experiments. Both codes, one employing finite-difference discretization with uniform mesh and GPU-acceleration (GPU-PF) and the other one employing finite-element discretization with adaptive-mesh and CPU-parallelization (PRISMS-PF), solve the same quantitative phase-field formulation that incorporates an anti-trapping current for the solidification of dilute alloys. We evaluate the predictions of each code for dendritic morphology, primary spacing, and tip dynamics in both 2D and 3D, as well as their numerical convergence and computational performance. While existing benchmark problems have primarily focused on simplified or small-scale simulations, they do not reflect the computational and modeling challenges posed by employing experimentally relevant time and length scales. Our results provide a practical framework for assessing phase-field code performance as well as validating and facilitating their application in integrated computational materials engineering (ICME) workflows that require integration with realistic experimental data.

36 MATERIALS SCIENCE↗
DOE OSTI2019

DFT-FE – A massively parallel adaptive finite-element code for large-scale density functional theory calculations

We present an accurate, efficient and massively parallel finite-element code, DFT-FE, for large-scale ab-initio calculations (reaching ~100,000 electrons) using Kohn-Sham density functional theory (DFT). DFT-FE is based on a local real-space variational formulation of the Kohn-Sham DFT energy functional that is discretized using a higher-order adaptive spectral finite-element (FE) basis, and treats pseudopotential and all-electron calculations in the same framework, while accommodating non-periodic, semi-periodic and periodic boundary conditions. We discuss the main aspects of the code, which include, the various strategies of adaptive FE basis generation, and the different approaches employed in the numerical implementation of the solution of the discrete Kohn-Sham problem that are focused on significantly reducing the floating point operations, communication costs and latency. We demonstrate the accuracy of DFT-FE by comparing the energies, ionic forces and periodic cell stresses on a wide range of problems with popularly used DFT codes. Further, we demonstrate that DFT-FE significantly outperforms widely used plane-wave codes---both in CPU-times and wall-times, and on both non-periodic and periodic systems---at systems sizes beyond a few thousand electrons, with over 5-10 fold speedups in systems with more than 10,000 electrons. In conclusion, the benchmark studies also highlight the excellent parallel scalability of DFT-FE, with strong scaling demonstrated on up to 192,000 MPI tasks.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1983

Measurements of heat transfer distribution over the surfaces of highly loaded turbine nozzle guide vanes

The results of an experimental study of aerodynamic (surface velocity) and heat transfer distributions over the surfaces of two different, highly loaded, low-solidity contemporary turbine vane designs are presented. The aerodynamic configurations of the two vanes were carefully selected to emphasize fundamental differences in the character of the solution surface pressure distributions and the consequent effect on surface heat transfer distributions. The experimental measurements were made in moderate-temperature, three-vane cascades under steady-state conditions. The principal independent parameters (Mach number, Reynolds number, turbulence intensity, and wall-to-gas temperature ratio) were varied over ranges consistent with actual engine operation, and the heat matrix was structured to provide an assessment of the independent influence of each parameter. These measurements are intended to serve as verification data for a parallel analytical code development effort. The results of this parallel effort are briefly reviewed, and the principal conclusions to date are summarized.

Nealy, D. A.↗
NASA NTRS1994

Discrete sensitivity derivatives of the Navier-Stokes equations with a parallel Krylov solver

This paper solves an 'incremental' form of the sensitivity equations derived by differentiating the discretized thin-layer Navier Stokes equations with respect to certain design variables of interest. The equations are solved with a parallel, preconditioned Generalized Minimal RESidual (GMRES) solver on a distributed-memory architecture. The 'serial' sensitivity analysis code is parallelized by using the Single Program Multiple Data (SPMD) programming model, domain decomposition techniques, and message-passing tools. Sensitivity derivatives are computed for low and high Reynolds number flows over a NACA 1406 airfoil on a 32-processor Intel Hypercube, and found to be identical to those computed on a single-processor Cray Y-MP. It is estimated that the parallel sensitivity analysis code has to be run on 40-50 processors of the Intel Hypercube in order to match the single-processor processing time of a Cray Y-MP.

Ajmani, Kumud↗
NASA NTRS1994

An implementation of a tree code on a SIMD, parallel computer

We describe a fast tree algorithm for gravitational N-body simulation on SIMD parallel computers. The tree construction uses fast, parallel sorts. The sorted lists are recursively divided along their x, y and z coordinates. This data structure is a completely balanced tree (i.e., each particle is paired with exactly one other particle) and maintains good spatial locality. An implementation of this tree-building algorithm on a 16k processor Maspar MP-1 performs well and constitutes only a small fraction (approximately 15%) of the entire cycle of finding the accelerations. Each node in the tree is treated as a monopole. The tree search and the summation of accelerations also perform well. During the tree search, node data that is needed from another processor is simply fetched. Roughly 55% of the tree search time is spent in communications between processors. We apply the code to two problems of astrophysical interest. The first is a simulation of the close passage of two gravitationally, interacting, disk galaxies using 65,636 particles. We also simulate the formation of structure in an expanding, model universe using 1,048,576 particles. Our code attains speeds comparable to one head of a Cray Y-MP, so single instruction, multiple data (SIMD) type computers can be used for these simulations. The cost/performance ratio for SIMD machines like the Maspar MP-1 make them an extremely attractive alternative to either vector processors or large multiple instruction, multiple data (MIMD) type parallel computers. With further optimizations (e.g., more careful load balancing), speeds in excess of today's vector processing computers should be possible.

Olson, Kevin M.↗
NASA NTRS2001

Support for Debugging Automatically Parallelized Programs

This viewgraph presentation provides information on support sources available for the automatic parallelization of computer program. CAPTools, a support tool developed at the University of Greenwich, transforms, with user guidance, existing sequential Fortran code into parallel message passing code. Comparison routines are then run for debugging purposes, in essence, ensuring that the code transformation was accurate.

Hood, Robert↗
NASA NTRS1998

Parallelization of ARC3D with Computer-Aided Tools

A series of efforts have been devoted to investigating methods of porting and parallelizing applications quickly and efficiently for new architectures, such as the SCSI Origin 2000 and Cray T3E. This report presents the parallelization of a CFD application, ARC3D, using the computer-aided tools, Cesspools. Steps of parallelizing this code and requirements of achieving better performance are discussed. The generated parallel version has achieved reasonably well performance, for example, having a speedup of 30 for 36 Cray T3E processors. However, this performance could not be obtained without modification of the original serial code. It is suggested that in many cases improving serial code and performing necessary code transformations are important parts for the automated parallelization process although user intervention in many of these parts are still necessary. Nevertheless, development and improvement of useful software tools, such as Cesspools, can help trim down many tedious parallelization details and improve the processing efficiency.

Jin, Haoqiang↗
NASA NTRS1992

Efficient use of high performance computers for integrated controls and structures design

Simply transporting design codes from sequential-scalar computers to parallel-vector computers does not fully utilize the computational benefits offered by high performance computers. By performing integrated controls and structures design on an experimental truss platform with both sequential-scalar and parallel-vector design codes, conclusive results are presented to substantiate this claim. The efficiency of a Cholesky factorization scheme in conjunction with a variable-band row data structure is presented. In addition, the Lanczos eigensolution algorithm has been incorporated in the design code for both parallel and vector computations. Comparisons of computational efficiency between the initial design code and the parallel-vector design code are presented. It is shown that the Lanczos algorithm with the Cholesky factorization scheme is far superior to the sub-space iteration method of eigensolution when substantial numbers of eigenvectors are required for control design and/or performance optimization. Integrated design results show the need for continued efficiency studies in the area of element computations and matrix assembly.

Belvin, W. K.↗
NASA NTRS1996

Multigrid with Overlapping Patches

Solving boundary value problems with optimal efficiency requires adaptivity and multilevel techniques. Previously, an implementation of the AFACx algorithm is presented that is based on rectangular Cartesian grids. This implementation does not allow for the over]ap of grids that lie on the same level of refinement. We investigate the case in which these grids overlap. A standard technique for overlapping grids is the Schwarz algorithm. Some ways of using the Schwarz algorithm in a standard multigrid scheme are presented. Also, a problem that arises in some situations with non-aligned, overlapping grids is described. This situation comes up in a natural way when the Schwarz algorithm is used as a relaxation scheme within a multilevel algorithm. We identify the reason for the bad convergence and show that by more sophisticated interpolation the difficulties can be overcome. Then we present a multiplicative Schwarz algorithm for a large number of grids that has a high potential for parallelization. Finally we give some numerical results for the FACx algorithm with overlapping grids on each refinement level. The implementation of the described codes uses C++ and the array class libraries A++ and P++. Using the A++/P++ programming environment, it was possible to move from a serial code to a parallel code within a few days.

Berndt, Markus↗
NASA NTRS2000

Functionality Improvements to Overaero

The functionality of the overset, static aeroelasticity, Navier-Stokes flow solver OVERAERO was increased by adding capability to the flow solver and enhancing code performance. Improvements were made to the fluids/structure interface, an MLP version of the parallel OVERAERO code was developed, and the OVERAERO-MPI code was ported to the Cray T3E. The OVERFLOW-MPI and OVERAERO-MPI codes were tested successfully on the IPG testbed and a means of reducing communication overhead within OVERFLOW-MPI was investigated. To solve an aeroelastic problem computationally, a structures grid surface definition and a fluids grid surface definition are required. Typically, the structures grid surface has a lower fidelity than the fluids grid surface. Thus, the methods developed to transfer data between the two grid systems are vital to the accuracy and efficiency of the aeroelasticity code. The fluids/structures interface developed for the OVERAERO code was improved to more accurately treat fluids surfaces that bridge between two different structural surfaces. For example, the method allowed the forward portion of a flap track fairing to deform with the wing and the aft end of the fairing to deform with the flap. A tightly-coupled version of the code based on OVERFLOW-MLP was developed to improve code performance on the SGI Origin 2000. This required a new parallelization strategy to couple the fluids and structures codes. The OVERAERO-MPI code was ported to the Cray T3E to extend the usability of the code. The port required extensive use of dynamic memory management techniques to fit large problems within the memory limitations of the T3E. The OVERFLOW-MPI and OVERAERO-MPI codes were tested on the IPG testbed being developed within NASA. For small problems with minimal data transfer between grids, there was little to no performance penalty spreading the computation across two machines. For very large problems, methods were developed to minimize intermachine communication via the grid partitioning scheme. By minimizing the intermachine communication requirements of the problem, it may still be beneficial to run a tightly-coupled flow solver across two machines within the IPG.

Gee, Ken↗
NASA NTRS1992

Automating FEA programming

In this paper we briefly describe a combined symbolic and numeric approach for solving mathematical models on parallel computers. An experimental software system, PIER, is being developed in Common Lisp to synthesize computationally intensive and domain formulation dependent phases of finite element analysis (FEA) solution methods. Quantities for domain formulation like shape functions, element stiffness matrices, etc., are automatically derived using symbolic mathematical computations. The problem specific information and derived formulae are then used to generate (parallel) numerical code for FEA solution steps. A constructive approach to specify a numerical program design is taken. The code generator compiles application oriented input specifications into (parallel) FORTRAN77 routines with the help of built-in knowledge of the particular problem, numerical solution methods and the target computer.

Sharma, Naveen↗
NASA NTRS1992

Performance of a plasma fluid code on the Intel parallel computers

One approach to improving the real-time efficiency of plasma turbulence calculations is to use a parallel algorithm. A parallel algorithm for plasma turbulence calculations was tested on the Intel iPSC/860 hypercube and the Touchtone Delta machine. Using the 128 processors of the Intel iPSC/860 hypercube, a factor of 5 improvement over a single-processor CRAY-2 is obtained. For the Touchtone Delta machine, the corresponding improvement factor is 16. For plasma edge turbulence calculations, an extrapolation of the present results to the Intel (sigma) machine gives an improvement factor close to 64 over the single-processor CRAY-2.

Lynch, V. E.↗
NASA NTRS1990

Parallel-vector computation for CSI-design code

Computational aspects of Control-Structure Interaction (CSI) DESIGN code is reviewed. Numerical intensive computation portions of CSI-DESIGN code were identified. Improvements in computational speed for the CSI-DESIGN code can be achieved by exploiting parallel and vector capabilities offered by modern computers, such as the Alliant, Convex, Cray-2, and Cray-YMP. Four options to generate the coefficient stiffness matrix and to solve the system of linear, simultaneous equations are currently available in the CSI-DESIGN code. A preprocessor to use RCM (Reverse Cuthill-Mackee) algorithm for bandwidth minimization was also developed for the CSI-DESIGN code. Preliminary results obtained by solving a small-scale, 97 node CSI finite element model (for eigensolution) have indicated that this new CSI-DESIGN code is 5 to 6 times faster (using 1 Alliant processor) than the old version of CSI-DESIGN code. This speed-up was achieved due to the RCM algorithm and the use of a new skyline solver. Efforts are underway to further improve the vector speed for CSI-DESIGN code, to evaluate its performance on a larger scale CSI model (such as phase zero CSI model) to make the code run efficiently on multiprocessor, parallel computer environment, and to make the code portable among different parallel computers available at NASA LaRC, such as Alliant, Convex, and Cray computers.

Nguyen, Duc T.↗