SEARCH · Search NASA

Results for “physical evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Observations of solar filaments at 8, 15, 22 and 43 GHz

Radio depressions frequently appear broader than their associated H-alpha filaments and often persist after a filament disappears. The reported study is concerned with the relative contributions of filament and the filament channel to the depth of radio depressions. Although the contribution cannot readily be determined in an individual case, the apportionment can be assessed statistically by extensive multi-frequency observations of many filaments and channels using the same telescope over a period of days. In principle it is possible to determine the evolution, geometry, and physical properties of filaments and filament channels with a widely based set of radio observations. It is found that all but a few percent of the microwave depressions lie on magnetic neutral lines or their natural extensions. The only possible exceptions are coronal holes on the disk, which are small or non-existent during the period of the conducted observations. The diversity of microwave filaments is striking. Even quiescent filaments show considerable variation.

Schmahl, E. J.↗

NASA NTRS1984

Moon

The present state and evolution of the physical features which are visible on the Moon's surface are emphasized herein. Lunar craters, their distribution and stratigraphy, and the cratering processes are addressed. Homologous material is presented for lunar basins. Terra breccias, maria, and mare basalts are discussed. Lunar geologic history is also considered.

Don E Wilhelms↗

NASA NTRS1986

Calculation of helicopter airfoil characteristics for high tip-speed applications

In this paper, we have applied a new aerodynamic tool to the study of helicopter airfoil characteristics. We have shown that the computed airloads reproduce completely the experimental behavior of representative airfoils across the transonic regime. In addition, the computational details of the flow fields, the surface pressure distributions, and the viscous-layer characteristics enable us to trace the evolution of the physical changes that occur as m infinity or Re increases. Descriptions of the complicated development of shock waves, shock-induced separation supplement the information that has been obtained heretofore in wind tunnels. In validating our calculations and assessing the accuracy of the results, including extensive grid-refinement studies and comparisons with data from numerous wind tunnels, we have defined the capabilities and limitations of the code ARC2D more precisely. This important aspect of the investigations can complement wind-tunnel tests, by providing flow-field details that are difficult to measure and by extending the range of low parameters beyond the capabilities of existing wind tunnels. The code has now progressed from a purely research stage to almost a production stage, where it can be run by specialists in the helicopter industry.

Mccroskey, W. J.↗

NASA NTRS1987

The role of convective parameterization in the simulation of a Gulf Coast precipitation system

Three simulations were performed with the Limited Area Mesoscale Prediction System (LAMPS) model in order to examine the role of convective parameterization in the simulation of the Gulf Coast precipitation system of March 6-7, 1982. The first simulation neglected moist processes, the second used the representation for moist physics of Orlanksi and Ross (1984) and Rosenthal (1978, 1979), and the third simulation incorporated the LAMPS sequential plume cumulus cloud model as convective parameterization for the model. The effects of various representations of moist physics on the evolution of the model's precipitation, kinematic and diabatic heating, and mass and wind fields are investigated. It is determined that the representation of moist thermodynamics in the meso-alpha-scale model influences the manner in which the model describes the mesoscale structures.

Kalb, Michael W.↗

NASA NTRS1989

Mars 94 Mission: Current plans and science

The Soviet Space Program proposes large-scale investigations of Mars as one of the most important trends for the next 10 to 15 years. The objectives include global studies of the surface of Mars, its atmosphere, and the return of soil samples to Earth. The first stage of the program is to be implemented in the mid-90s. It includes measurements from an orbiter and a balloon in the atmosphere and on the surface from a rover as well. This can be done using the high energy upper stage of the launch vehicle. The payload mass could amount to about 1500 to 1700 kg. The capabilities of the Mars Mission in 1994 are discussed. As presently planned, Mars will be studied concurrently with the following facilities: an orbiter with instruments for remote sensing from a polar orbit; a balloon deployed in the Martian atmosphere; a rover on the surface; a network of smaller stations on the surface; a subsatellite; and a device to return a container with photo films of the Martian surface taken with a super high resolution. If the exploration of Mars with the MARS-94 spacecraft begins late in 1994 the American Mars-Observer will still be functioning in the near-Mars orbit. Thus, joint operation of the two satellites becomes possible providing coordinated exploration, the creation of joint data banks, joint data interpretation, and the development of a joint engineering model of Mars for its further exploration. There is an opportunity for experiments and instrumentation on the Soviet missions that address questions of interest to exobiology. American scientists are invited to participate in the upcoming Soviet missions, and lend expertise to further understanding of the relationship between the physical and chemical evolution of the solar system and the appearance of life.

Mukhin, Lev↗

NASA NTRS1991

Options for a lunar base surface architecture

The analysis of the Space Exploration Initiative architectures involves making definitions of systems engineering designs for the construction of lunar and Mars bases for the support of science, exploration, and resource production on these planets. This paper discusses the results of the Space Resource Utilization Architecture study, which was initiated to develop the technical capability for extracting useful materials from the indigenous resources of the moon and Mars. For the moon, an infrastructure concept of a base is designed which can support a crew of 12. The major phases of the lunar-base development, the systems and the elements involved, and the physical layout and evolution of the base are described.

Roberts, Barney B.↗

NASA NTRS1993

A model for the hydrologic and climatic behavior of water on Mars

An analysis is carried out of the hydrologic response of a water-rich Mars to climate change and to the physical and thermal evolution of its crust, with particular attention given to the potential role of the subsurface transport, assuming that the current models of insolation-driven change describe reasonably the atmospheric leg of the planet's long-term hydrologic cycle. Among the items considered are the thermal and hydrologic properties of the crust, the potential distribution of ground ice and ground water, the stability and replenishment of equatorial ground ice, basal melting and the polar mass balance, the thermal evolution of the early cryosphere, the recharge of the valley networks and outflow, and several processes that are likely to drive the large-scale vertical and horizontal transport of H2O within the crust. The results lead to the conclusion that subsurface transport has likely played an important role in the geomorphic evolution of the Martian surface and the long-term cycling of H2O between the atmosphere, polar caps, and near-surface crust.

Clifford, Stephen M.↗

NASA NTRS1991

Modeling turbulent boundary layers in adverse pressure gradients

Many of the turbulent layers encountered in practical flows develop in adverse pressure gradients; hence, the dynamics of the thickening and possible separation of the boundary layer has important implications for design practices. What are the key physical processes that govern how a turbulent boundary layer responds to an adverse pressure gradient, and how should these processes be modeled? Despite the ubiquity of such flows in engineering and nature, these equations remain largely unanswered. The turbulence closure models presently used to describe these flows commonly use 'wall functions' that have ad hoc corrections for the effects of pressure gradients. There is, therefore, a practical and theoretical need to examine the effects of adverse pressure gradients on wall bounded turbulent flows in order to develop models based on sound physical principle. The evolution of a turbulent boundary layer on a flat wall with an externally imposed pressure gradient is studied.

Belcher, Stephen E.↗

NASA NTRS1993

Low temperature synthesis of monolithic transparent Ta2O5 gels from hydrolysis of metal alkoxide

Tantalum oxide gels in the form of transparent monoliths and powder were prepared from hydrolysis of tantalum pentaethoxide under controlled conditions using different mole ratios of Ta(OC2H5)5:C2H50H:H20:HCl. Alcohol acts as the mutual solvent and HCl as the deflocculating agent. For a fixed alkoxide:water:HCl ratio, time of gel formation increased with the alcohol to alkoxide mole ratio. Thermal evolution of the physical and structural changes in the gel was monitored by differential thermal analysis, thermogravimetric analysis, x-ray diffraction, and infrared spectroscopy. On heating to approximately 400 C, the amorphous gel crystallized into the low temperature orthorhombic phase Beta-Ta2O5, which transformed into the high temperature tetragonal phase Alpha-Ta2O5 when further heated to approximately 1450 C. The volume fraction of the crystalline phase increased with the firing temperature. The Alpha-Ta205 converted back into the low temperature phase, Beta-Ta2O5, on slow cooling through the transformation temperature of 1360 C indicating a slow but reversible transformation.

Bansal, Narottam P.↗

NASA NTRS1994

Multivariable Hermite polynomials and phase-space dynamics

The phase-space approach to classical and quantum systems demands for advanced analytical tools. Such an approach characterizes the evolution of a physical system through a set of variables, reducing to the canonically conjugate variables in the classical limit. It often happens that phase-space distributions can be written in terms of quadratic forms involving the above quoted variables. A significant analytical tool to treat these problems may come from the generalized many-variables Hermite polynomials, defined on quadratic forms in R(exp n). They form an orthonormal system in many dimensions and seem the natural tool to treat the harmonic oscillator dynamics in phase-space. In this contribution we discuss the properties of these polynomials and present some applications to physical problems.

Dattoli, G.↗

NASA NTRS1996

Evidence for the Evolution of Grain Properties in the NGC 2024 Star Forming Ridge

High-resolution images of the NGC 2024 molecular ridge in CS(2-1) and 3 mm continuum emission have been obtained using the Owens Valley millimeter array. The data are used to determine the temperature and dynamics of the ridge, and to ascertain the evolutionary state of the embedded protostars FIR2-7. Dust continuum emission is detected from all six FIR sources. The CS(2-1) follows the ridge closely, but does not always coincide with the FIR sources. Direct comparison of column density estimates derived from the CS and the dust emission in the ridge shows that for all FIR sources except FIR5 both methods are in agreement to within a factor of two, assuming a dust opacity k(sub 3 mm) = 0.01 cm(exp 2)/g. However, away from the FIR sources strong CS(1-0) emission is observed in several compact clumps which, with the above dust opacity, should have been detected in 3 mm dust continuum. The brightness temperature of the CS, approx. 40 K, rules out the possibility that the high line-to-continuum ratio is due to low gas temperatures; the discrepancy can be resolved if k(sub 3 mm) is a factor of 10 lower away from the FIR sources. A new high-resolution image of the 450-micron dust continuum emission obtained using the James Clerk Maxwell Telescope supports this hypothesis. These results suggest an evolution in the physical properties of the dust grains, possibly grain size, between quiescent regions in the ridge and the sites of active star formation.

Chandler, C. J.↗

NASA NTRS2000

Spacewatch Survey of the Solar System

The purpose of the Spacewatch project is to explore the various populations of small objects throughout the solar system. Statistics on all classes of small bodies are needed to infer their physical and dynamical evolution. More Earth Approachers need to be found to assess the impact hazard. (We have adopted the term "Earth Approacher", EA, to include all those asteroids, nuclei of extinct short period comets, and short period comets that can approach close to Earth. The adjective "near" carries potential confusion, as we have found in communicating with the media, that the objects are always near Earth, following it like a cloud.) Persistent and voluminous accumulation of astrometry of incidentally observed main belt asteroids MBAs will eventually permit the Minor Planet Center (MPQ to determine the orbits of large numbers (tens of thousands) of asteroids. Such a large body of information will ultimately allow better resolution of orbit classes and the determinations of luminosity functions of the various classes, Comet and asteroid recoveries are essential services to planetary astronomy. Statistics of objects in the outer solar system (Centaurs, scattered-disk objects, and Trans-Neptunian Objects; TNOs) ultimately will tell part of the story of solar system evolution. Spacewatch led the development of sky surveying by electronic means and has acted as a responsible interface to the media and general public on this discipline and on the issue of the hazard from impacts by asteroids and comets.

McMillan, Robert S.↗

NASA NTRS2003

The Ionization History of The Intergalactic Medium:

The funded project seeked a unified description of the ionization, physical structure, and evolution of the intergalactic medium (IGM) and quasar intervening absorption systems. We proposed to conduct theoretical studies of the IGM and QSO absorbers in the context of current theories of galaxy formation, developing and using numerical and analytical techniques aimed at a detailed modeling of cosmological radiative transfer, gas dynamics, and thermal and ionization evolution. The ionization history of the IGM has important implications for the metagalactic UV background, intergalactic helium absorption 21-cm tomography, metal absorption systems, fluctuations in the microwave background, and the cosmic rate of structure and star formation. All the original objectives of our program have been achieved, and the results widely used and quoted by the community. Indeed, they remain relevant as the level and complexity of research in this area has increased substantially since our proposal was submitted, due to new discoveries on galaxy formation and evolution, a flood of high-quality data on the distant universe, new theoretical ideas and direct numerical simulations of structure formation in hierarchical clustering theories.

Madau, Piero↗

NASA NTRS2008

X-Ray Source Motions and Their Implications for Flare Models

RHESSI observations have revealed a downward contraction of solar flare loops followed by upward expansion. In some flares a pair of above-the-looptop sources is observed, one just above the top of the cooler flare loops and the other a discrete source well above the looptops characterized by an effective temperature gradient increasing toward lower altitudes. In one flare the higher, temperature-inverted coronal source sped outward at a speed consistent with that of a coronal mass ejection associated with the flare. In some flares with minimal preheating (early impulsive flares), nonthermal X-ray sources have been observed to propagate downward and then upward along the legs of the flare loop. I will discuss the implications of all of these X-ray source motions for flare models, and their use as diagnostics of the evolution of the physical conditions in flares.

Holman, Gordon D.↗

NASA NTRS2006

Sensitivity of Passive Microwave Snow Depth Retrievals to Weather Effects and Snow Evolution

Snow fall and snow accumulation are key climate parameters due to the snow's high albedo, its thermal insulation, and its importance to the global water cycle. Satellite passive microwave radiometers currently provide the only means for the retrieval of snow depth and/or snow water equivalent (SWE) over land as well as over sea ice from space. All algorithms make use of the frequency-dependent amount of scattering of snow over a high-emissivity surface. Specifically, the difference between 37- and 19-GHz brightness temperatures is used to determine the depth of the snow or the SWE. With the availability of the Advanced Microwave Scanning Radiometer (AMSR-E) on the National Aeronautics and Space Administration's Earth Observing System Aqua satellite (launched in May 2002), a wider range of frequencies can be utilized. In this study we investigate, using model simulations, how snow depth retrievals are affected by the evolution of the physical properties of the snow (mainly grain size growth and densification), how they are affected by variations in atmospheric conditions and, finally, how the additional channels may help to reduce errors in passive microwave snow retrievals. The sensitivity of snow depth retrievals to atmospheric water vapor is confirmed through the comparison with precipitable water retrievals from the National Oceanic and Atmospheric Administration's Advanced Microwave Sounding Unit (AMSU-B). The results suggest that a combination of the 10-, 19-, 37-, and 89-GHz channels may significantly improve retrieval accuracy. Additionally, the development of a multisensor algorithm utilizing AMSR-E and AMSU-B data may help to obtain weather-corrected snow retrievals.

Markus, Thorsten↗

NASA NTRS2012

Interstellar Dust - A Review

The study of the formation and the destruction processes of cosmic dust is essential to understand and to quantify the budget of extraterrestrial organic materials. Although dust with all its components plays an important role in the evolution of interstellar physics and chemistry and in the formation of organic materials, little is known on the formation and destruction processes of carbonaceous dust. Laboratory experiments that are performed under conditions that simulate interstellar and circumstellar environments to provide information on the nature, the size and the structure of interstellar dust particles, the growth and the destruction processes of interstellar dust and the resulting budget of extraterrestrial organic molecules. A review of the properties of dust and of the laboratory experiments that are conducted to study the formation processes of dust grains from molecular precursors will be given.

Salama, Farid↗

NASA NTRS2018

Numerical and Experimental Study of Local Resin Pressure for the Manufacturing of Composite Structures and Their Effect on Porosity

Porosity can have significant impact on the mechanical performance of composite structures. The primary sources of voids during the cure of composites include air entrapped during lay-up, bag or tool leaks, and the off gassing of volatiles. Capturing the physics of void evolution during composite processing is a challenge due to the number of sources and changing phenomena that give rise to voids as the resin cures. Local changes in resin pressure due to geometric features or cure shrinkage have been experimentally linked to a higher likelihood of void formation. In this work, a preliminary model was developed to predict local resin pressure which can be used to identify regions more susceptible to porosity. Experiments were conducted to validate the model accuracy. Ultimately, this model can be used as a tool to minimize the likelihood of porosity by optimizing the material selection, part design, layup, and cure process.

Bedayat, Houman↗

NASA NTRSDate not supplied

Gigatraj: An Atmospheric Trajectory Model

Atmospheric trajectory models have a long history of success in tracking air motions in the lower stratosphere and upper troposphere over periods of up to a few days. Parcels have been traced backwards from observations to identify whatever phenomena (strong convection, volcanic eruptions, rocket launches, etc.) put their signature on them. Parcels have also been initialized at a known event and traced forward to examine their subsequent physical and chemical evolution. We describe a new trajectory model, "gigatraj," that aims to increase exibility by (a) making it straightforward to use new meteorological data sources, including those not based on regular latitude-longitude grids; (b) enabling a run-time choice of vertical coordinate system for kinematic and/or quasi-isentropic calculations; (c) allowing for the output of arbitrary meteorological products, selectable by the user and interpolated to the parcels' locations and times. The model can be run in a serial or parallel processing environment, so that large numbers of parcels can be traced in a reasonable time. Information is presented on model accuracy and performance. The former is demonstrated by runs using both test-pattern winds (comparing expected paths with actual output) and real-world winds (comparing forward and backward runs to characterize how well parcels retrace their paths). Sample cases are also shown, including a reverse domain lling (RDF) calculation illustrating a tropopause fold event. Model output can be displayed using the new Visualization And Lagrangian dynamics Immersive eXtended Reality (VALIXR) system, and an example will be shown. In addition, we describe work to incorporate a version of gigatraj into the Goddard Earth Observing System (GEOS) of NASA's Global Modeling and Assimilation O ce (GMAO) at Goddard Space Flight Center. This enables trajectory calculations to be performed within the running GEOS model at the latter's native time resolution, instead of using the winds from every few hours. It also provides access to all of GEOS's internal variables as they are calculated. This module may be useful, for example, for tracking rapid chemical changes in a Lagrangian framework.

dynamics↗