Search NASA⌕ Search

SEARCH · Search NASA

Results for “polymer particles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Learning unknown physics of non-Newtonian fluids

Here, we use physics-informed neural networks (PINNs) to learn viscosity models of two non-Newtonian systems (polymer melts and suspensions of particles) using only velocity measurements. For synthetic velocity data generated with the power-law viscosity model, the PINN-inferred viscosity model agrees with the analytical model for shear rates with large absolute values but deviates for shear rates near zero where the analytical model has an unphysical singularity. Once the viscosity model is learned the PINN method can solve the momentum conservation equation using only the boundary conditions.

42 ENGINEERING↗
DOE OSTI2023

Tunable negative coefficient thermal expansion materials and composites

The present disclosure is directed to variable composition ceramics. Zr (2−x) Hf (x) WP 2 O 12 and Hf 2 WP 2 O 12 exhibit large negative thermal expansion that is linear over a large temperature range up to at least 900° C., These new ceramic material particles may be mixed with polymers to make a composite suitable for use in backsheets for photovoltaic modules or in other applications. The thermal expansion coefficient of the composite can be tailored to match that of the solar cell in order to reduce stress resulting from daily thermal cycling.

Gordon, Margaret Ellen↗
DOE OSTI2021

Modelling the interlayer bond strength of 3D printed concrete with surface moisture

Highlights: • An analytical model for interlayer adhesion of 3DPC is proposed based on the amount of surface moisture on the interlayer. • For this mix, the model accurately (RMSE=2.5%) predicts the reduction in interlayer adhesion from 30% to 50%. • Internal curing with superabsorbent polymers increases the interlayer adhesion by 10% and flexural strength by 19%. • SAPs also improve the initial thixotropy by 49% and buildability by 25% compared to the reference. Providing additional water to the hydrating cementitious particles is essential to achieve the optimal mechanical performance of the low w/b concrete mixes preferred for 3D printing. This study incorporates superabsorbent polymers (SAP) and additional water in 3D printed concrete (3DPC) to promote the hydration process through delayed internal water release. The study shows that a retentive SAP modifies the rheological development by absorbing the pore fluid for a short period after printing. The absorption-induced stiffening increases the thixotropy and buildability by 49% and 25%, respectively. A retentive SAP increases the flexural strength and interlayer adhesion by 19% and 10%, respectively. This is due to the internal water release that promotes hydration. Evaporation of the interlayer moisture during the pass time has the opposite effect— evaporation reduces the interlayer adhesion. Based on this assumption, an analytical model is proposed. The model accounts for the pass time, bleeding, and the environmental evaporation rate to estimate the surface moisture and predict the lack of interlayer adhesion. In this study, the model accurately (RMSE = 2.5%) predicted an interlayer adhesion reduction from 30% to 50%. The interlayer adhesion results of other studies could also be predicted.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Self-Assembled Vesicles from Mixed Brush Nanoparticles in Solution

The self-assembly of binary polymer-grafted nanoparticles (NPs) in a selective solvent is investigated using coarse-grained simulations. Simulations are performed using theoretically informed Langevin dynamics (TILD), a particle-based method that employs a particle-to-mesh scheme to efficiently calculate the nonbonded interactions. Here, the particles are densely grafted with two immiscible polymers, A and B, that are permanently bound to the NP either at random grafting sites (random-grafted) or with all the A chains on one hemisphere of the NP and all the B chains on the other hemisphere (Janus-grafted). For NPs with random grafting, the polymers phase-separate on the surface of the NP to form Janus-type structures in dilute solution, even though some of the chains have to stretch around the particle to form the Janus structure. When the solvent quality is sufficiently poor for the solvophobic chains, the binary grafted NPs assemble into various structures, including double-walled vesicles. In particular, vesicles are formed when the solvophilic volume fraction is between 0.2 and 0.3, in a similar range to that required for vesicle formation in diblock copolymers in a selective solvent. For mixed-grafted NPs, there is considerable variation in the structure of each individual NP, but nevertheless, these NPs form ordered vesicles, similar to those formed by Janus-grafted NPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A diffusion–deformation model with damage for polymer undergoing rapid decompression failure

Green hydrogen is emerging as one of the most promising alternatives to replace fossil fuels. While hydrogen gas has a good energy density by weight, its poor energy density by volume requires it to be stored under high pressure for commercial use. The hydrogen infrastructure developed to handle this high pressure hydrogen contains multiple components made of polymers as sealing agents. Although polymers do not react chemically with hydrogen gas, they undergo a mechanical failure when high pressure hydrogen gas is suddenly depressurized. This phenomenon known as 'rapid decompression failure' occurs due to the diffusion of hydrogen through polymer and getting trapped inside pre-existing cavities or voids. Here, in this paper, a continuum mechanics-based coupled diffusion-deformation-damage model was developed to predict the hydrogen distribution, stress distribution, and damage propagation inside the polymer while it undergoes rapid decompression failure. The polymer was modeled as a hyperelastic material because it represents the nonlinear material response observed in uniaxial tensile tests perfectly. The effects of hydrogen diffusivity, pre-existing cavity size, cavity location, applied hydrogen pressure, and depressurization rate on damage initiation were studied. It was found that the coefficient of diffusion plays an important role in damage initiation and damage was mostly concentrated in the inside areas rather than near the surface. Experiments were conducted with EPDM polymer which agreed well with the predicted trends using the given model. The effect of adding carbon black and silica filler particles and plasticizer to the pure EPDM polymer was also studied. It was found that damage during RDF decreases with the addition of fillers, but increases with the addition of the plasticizer. Finally, the damage evolution in the presence of two cavities was also studied, and was found that the interaction of stress fields around the cavities alters the damage occurring during RDF.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Evaluating Cryo–TEM Reconstruction Accuracy of Self–Assembled Polymer Nanostructures

Cryogenic transmission electron microscopy (cryo–TEM) combined with single particle analysis (SPA) is an emerging imaging approach for soft materials. However, the accuracy of SPA–reconstructed nanostructures, particularly those formed by synthetic polymers, remains uncertain due to potential packing heterogeneity of the nanostructures. In this study, the combination of molecular dynamics (MD) simulations and image simulations is utilized to validate the accuracy of cryo–TEM 3D reconstructions of self–assembled polypeptoid fibril nanostructures. Using CryoSPARC software, image simulations, 2D classifications, ab initio reconstructions, and homogenous refinements are performed. By comparing the results with atomic models, the recovery of molecular details is assessed, heterogeneous structures are identified, and the influence of extraction location on the reconstructions is evaluated. In conclusion, these findings confirm the fidelity of single particle analysis in accurately resolving complex structural characteristics and heterogeneous structures, exhibiting its potential as a valuable tool for detailed structural analysis of synthetic polymers and soft materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Understanding the origin of softness in structurally tailored and engineered macromolecular (STEM) gels: A DPD study

Structurally tailored and engineered macromolecular (STEM) gels are polymer networks containing a primary network (the “STEM-0” gel) and side chains that are anchored to this network (forming the “STEM-1” gel). The ability to vary the features of the side chains provides a robust means of tailoring the macroscopic properties of the material. We use dissipative particle dynamics (DPD) simulations to determine the mechanical response of STEM-1 gels to uniaxial compression for various values of the side chain length, n sc . While the Young’s modulus of the material is significantly decreased with increasing n sc (at a fixed density of grafted side chains), above a certain saturation value, increasing n sc does not lead to any further softening of the sample. Using the simulations, we calculate the relevant stresses, which are related to the Young’s modulus and the number of entanglements in the network. We show that the backbone chains become more spread out upon addition of sidechains, leading to a decrease in the physical entanglements between backbone segments. This observation accounts for the decrease of stress in the backbone network and the softening of the networks through the addition of sidechains. For long chains, however, the number density of physical crosslinks between side chains is independent of side chain length; this observation explains the observed stress saturation in the STEM-1 gels. Our approach allows us to correlate the molecular architecture of the gels to the resultant macroscopic mechanical behavior and provide guidelines for fabricating STEM gels with well-defined mechanical properties, which allow the materials to be used for a variety of applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Shock compression of additively manufactured high solids loaded polymer composites with aligned porosity

The effects of aligned porosity on the shock-compression response of additively manufactured (AM) composite structures with collinear and log-cabin geometries are investigated. The composites contain two inorganic and two organic particle populations and a UV-curable polymer binder. X-ray phase contrast imaging (X-PCI) is used as an in-material diagnostic in plate-impact experiments performed at the Dynamic Compression Sector of the Advanced Photon Source at the Argonne National Laboratory. Macroscale shock and particle velocities and microscale pore collapse velocities are measured from X-PCI images obtained from samples impacted in various orientations relative to the AM build directions. The linear shock and particle velocity relation for the structures with collinear build geometry shows directional differences, with the build direction exhibiting the highest slope and the filament print direction having the shallowest slope. Composites with log-cabin geometry, due to their slightly lower porosity and smaller sized pores, show higher shock velocities than the collinear structures at the same particle velocity. Microscale directionality effects are also observed, with the pore collapse velocity dependent on the pore configuration. Specifically, the pore collapse velocity is highest for pores elongated along the impact direction which is the case for the colinear structures impacted in the filament print direction, which is consistent with the directionality trend observed in the data for the shock and particle velocity equation of state. The pore collapse velocity approaches ∼80 % of the shock velocity and is several times the average bulk particle velocity, suggesting a highly hydrodynamic mechanism of pore collapse. Overall, both the macroscale response as measured by the shock and particle velocity relationship, and the microscale response as measured by the pore collapse velocity, are found to be anisotropic and dependent on the AM composite structure.

Wagner, K. B. [Georgia Institute of Technology, At↗
DOE OSTI2026

Neutron Reflectometry Reveals Diffusion in Contrast-Matched Brush Particle Bilayers

A material system for performing layer-spread experiments on brush particle bilayers is presented and used to determine the diffusion constant of brush particles in the melt state. Selective deuteration of the core and shell of organo-silica nanoparticles grafted with poly(methyl methacrylate) was used to match the scattering length density of the core and the polymer canopy layer. This subdued the scattering of particle cores (i.e., formfactor scattering) and enabled the analysis of the interdiffusion kinetics using neutron reflectivity. For low molecular grafts, i.e., grafts with a molecular weight below the entanglement limit, the interdiffusion kinetics revealed both a sub- and Fickian diffusion regime. The former was attributed to the local dynamics that was constrained by the slow-moving cores of neighboring brush particles that acted as long-lived physical cross-links. No transition to Fickian diffusion was observed for entangled systems, even at prolonged annealing times. This suggested a higher level of kinetic restraint in entangled brush particle melts as compared to, for example, star polymers with a comparable chain length for which Fickian diffusion has been reported under similar conditions.

Diffusion, Polymer Grafted Nanoparticles, Neutron ↗
DOE OSTI2021

Preparation of Mechanically Robust, Macroscopic Low-Density Gold Foams by Highly Efficient Electroless Gold Plating

Mechanically robust, macroscopic-sized low-density gold foams with unique morphology of hollow gold shells were prepared by the synthesis of gold-coated polystyrene coreshell particles followed by thermal removal of the polymer core. Here, we reported a simple, highly efficient electroless gold plating procedure to form ultrathin, conformal gold coatings on the surface of polystyrene particles. A modified, scalable casting approach to form uniform, large monoliths (up to 1 cm diameter) and a baking condition to minimize undesirable densification of final foams were also developed. To demonstrate the mechanical stability and integrity of the Au foams, a representative monolithic sample (~0.9 g/ cm3 ) was successfully cut and shaped into a gold foam “washer” by a series of precision machining and processing. A depth-sensing indentation test (nanoindentation) as well as characterizations on other useful properties such as surface areas and electrical conductivity of the Au foams were carried out to understand the mechanical behavior and potential applicability.

Electroless Gold Plating↗
DOE OSTI2023

Design Principles for Using Amphiphilic Polymers To Create Microporous Water

Aqueous dispersions of microporous nanocrystals with dry, gas-accessible pores—referred to as “microporous water”—enable high densities of gas molecules to be transported through water. For many applications of microporous water, generalizable strategies are required to functionalize the external surface of microporous particles to control their dispersibility, stability, and interactions with other solution-phase components—including catalysts, proteins, and cells—while retaining as much of their internal pore volume as possible. Here, in this work, we establish design principles for the noncovalent surface functionalization of hydrophobic metal–organic frameworks with amphiphilic polymers that render the particles dispersible in water and enhance their hydrolytic stability. Specifically, we show that block co-polymers with persistence lengths that exceed the micropore aperture size of zeolitic imidazolate frameworks (ZIFs) can dramatically enhance ZIF particle dispersibility and stability while preserving porosity and >80% of the theoretical O 2 carrying capacity. Moreover, enhancements in hydrolytic stability are greatest when the polymer can form strong bonds to exposed metal sites on the external particle surface. More broadly, our insights provide guidelines for controlling the interface between polymers and metal–organic framework particles in aqueous environments to augment the properties of microporous water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Exploiting Nonlinear Elasticity for Anomalous Magnetoresponsive Stiffening

Here, a paradigm for enhanced magnetorheological elastic materials is introduced and experimentally established. We show that a nonlinearly stiffening polymer matrix can be exploited to achieve anomalous magneto-elastomer stiffening exceeding standard magneto-elastomer theory and experiment in terms of percentage stiffness change and sensitivity to applied magnetic flux. Using a model system of a semifexible fibrin network embedded with micron sized carbonyl iron particles, we demonstrate that even at a modest particle volume fraction (0.5-4%), a coupling between the magnetically-interacting dipoles and a strain-stiffening polymer mesh provides previously unexplored opportunities for material design. Our experiments indicate that confined particles within thefibrin network internally tension and stiffen the polymer mesh when an external field is applied, resulting in a field-dependent stiffening response from the polymer mesh that superposes with the magnetic interparticle interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Plasmonic pathway to hybrid nanomaterials through energy transfer

Plasmon-induced resonance energy transfer (PIRET) is a promising approach for plasmonic photocatalysis and energy conversion, but challenges include elucidating the mechanism and maximizing its efficiency, both of which are hampered by competing processes. Another challenge is demonstrating that PIRET can photoinitiate reactions that follow efficient pathways compared to bulk processes. We report a plasmon-induced route to plasmonic-polymer hybrid nanomaterials using in operando single-particle spectroelectrochemistry. An energy transfer efficiency of 40% is achievable when the spectral overlap between gold nanorod scattering and polymer absorption is maximized. We also show that PIRET-initiated polymerization proceeds through a different mechanism than bulk polymerization, supported by spectroscopic evidence and density functional theory calculations, highlighting efficient energy cascading from photon to plasmon to exciton and, lastly, to unconventional light-initiated chemistry.

Oh, Hyuncheol [University of Illinois Urbana-Champ↗
DOE OSTI2024

Elucidating the assembly of Nanoparticle Organic Hybrid Materials (NOHMs) near an electrode interface with varying potential using Neutron Reflectivity

A critical concern regarding electrolyte formulation in an electrochemical environment is the impact of the interaction of the multiple components (i.e., supporting electrolyte or additive) with the electrode surface. Recently, liquid-like neat Nanoparticle Organic Hybrid Materials (NOHMs) have been considered as an electrolyte component to improve the transport of redox-active species to the electrode surface. However, the structure and assembly of the NOHMs near the electrode surface is unknown and could significantly impact the electrode-electrolyte interface. Hence, we have investigated the depth profile of polyetheramine (HPE) polymer and NOHM-I-HPE (nanoparticles with ionically bonded HPE polymer) in deuterated water (D2O) in the presence of two different salts (KHCO3 and ZnCl2) near two different electrode surfaces using neutron reflectometry. Moreover, the depth profile of the NOHM-I-HPE near the electrode surface in a potential has also been studied with in-situ reflectivity experiments. Our results indicate that a change in the chemical structure/hydrophilicity of the electrode surface does not significantly impact the ordering of HPE polymer or NOHM-I-HPE near the surface. Here, this study also indicates that the NOHM-I-HPE particles form a clear layer near the electrode surface immediately above an adsorbed layer of free polymer on the electrode surface. The addition of salt does not impact the layering of NOHM-I-HPE, though it does alter the conformation of the polymer grafted to the nanoparticle surface and free polymer sequestered near the surface. Finally, the application of negative potential results in an increased amount of free polymer near the electrode surface. Correlating the depth profile of free polymer and NOHM-I-HPE particles with the electrochemical performance indicates that this assembly of free polymer near the electrode surface in NOHM-I-HPE solutions contributes to the higher current density of the system. Therefore, this holistic study offers insight into the importance of the assembly of NOHM-I-HPE electrolyte and free polymer near the electrode surface in an electrochemical milieu on its performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A description of structured waves in shock compressed particulate composites

Dynamic compression of composite materials is of scientific interest because the mechanical mismatch between internal phases challenges continuum theories. Typical assumptions about steady wave propagation and quasi-instantaneous state changes require reexamination along with the need for time-dependent models. To that end, data and models are presented here for the shock compression of an idealized particulate composite. To serve as a generic representative of this material class, a polymer matrix was filled with tungsten particles, ranging from 1 to 50 vol. %. This creates a simple microstructure containing randomly scattered particles with an extreme impedance mismatch to the binding matrix. These materials were parallel plate impact loaded by Al flyers traveling at 1.8–5.0 km/s. Velocimetry provided records of the equilibrium state and the compression wave structure for each case with trends quantified by an empirical fit. The same quantities were also studied as a function of the wave's propagation distance. A homogenized viscoelastic model then made it possible to progress from cataloging trends to making predictions. Starting from a Mie–Gruneisen equation of state, additional time varying terms were added to capture the transient response. After calibration, accurate predictions of the steady wave structure were possible.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Polymer-Grafted Nanoparticles as All-in-One Nanoplatforms

Polymer-grafted nanoparticles (PGNPs) represent a versatile class of hybrid nanomaterials, in which nanoparticle cores and tethered polymer coronas are integrated into structurally programmable building blocks. Rapid advances in nanoparticle surface functionalization and surface-initiated polymerization have enabled increasingly precise control over the nanoparticle core composition and brush architecture, greatly expanding the accessible structural and functional landscape of PGNPs. This review summarizes recent progress in the modular design and structural regulation of PGNPs, with an emphasis on nanoparticle platforms and associated surface functionalization strategies, polymer brush synthesis and architectural control, and the structure−property relationships that govern PGNP behavior. Emerging applications are further highlighted, including additive manufacturing, self-healing materials, membrane-based gas separations, and battery-related systems, where PGNPs provide unique opportunities to couple nanoscale interfacial design with macroscopic performance. Finally, future opportunities are discussed for extending PGNP concepts to increasingly complex, multifunctional, and application-oriented hybrid materials.

functional nanocomposites↗
DOE OSTI2020

Metal ion extraction from brines

A material includes a porous particle that includes a metal ion imprinted polymer. The metal ion imprinted polymer is formed from a hydrophilic co-monomer, a metal containing polymerizable compound, and a cross-linking agent. The metal containing polymerizable compound includes at least one metal chelating ligand. The metal ion imprinted polymer includes a plurality of metal ion selective binding sites. A method includes flowing brine containing a metal ion through a reactor that includes the material. The method further includes discharging the brine from the reactor, contacting the porous particles with water, and pressurizing the reactor with carbon dioxide. The carbon dioxide reacts with the adsorbed metal ions to form a metal carbonate solution. The method further includes depressurizing the reactor to precipitate metal carbonate from the metal carbonate solution and discharging the metal carbonate solution from the reactor.

36 MATERIALS SCIENCE↗