Search NASA⌕ Search

SEARCH · Search NASA

Results for “power system studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 7: System/subsystem requirements data book

Volume 7 of the Satellite Power Systems (SPS) Concept Definition Study final report summarizes the basic requirements used as a guide to systems analysis and is a basis for the selection of candidate SPS point design(s). Initially, these collected data reflected the level of definition resulting from the evaluation of a broad spectrum of SPS concepts. As the various concepts matured these requirements were updated to reflect the requirements identified for the projected satellite system/subsystem point design(s). The identified subsystem/systems requirements are defined, and where appropriate, recommendations for alternate approaches which may represent improved design features are presented. A more detailed discussion of the selected point design(s) will be found in Volume 2 of this report.

Hanley, G. M.↗
NASA NTRS2006

A Conceptual Titan Orbiter Mission Using Advanced Radioisotope Power Systems

This study details a conceptual follow-on Titan orbiter mission that would provide full global topographic coverage. surface imaging, and meteorological characterization of the atmosphere over a nominal 5-year science mission duration. The baseline power requirement is approx.1 kWe at EOM and is driven by a high power radar instrument that would provide 3-dimensional measurements of atmospheric clouds, precipitation, and surface topography. While this power level is moderately higher than that of the Cassini spacecraft. higher efficiency advanced RPSs could potentially reduce the plutonium usage to less than 1/3rd of that used on the Cassini spacecraft. The Titan Orbiter mission is assumed to launch in 2015. It would utilize advanced RPSs to provide all on-board power.

radioisotope power systems (RPS)↗
NASA NTRS1979

Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 2, part 1: System engineering

Volume 2, Part 1, of a seven volume report is presented. Part 1 encompasses Satellite Power Systems (SPS) systems engineering aspects and is divided into three sections. The first section presents descriptions of the various candidate concepts considered and conclusions and recommendations for a preferred concept. The second section presents a summary of results of the various trade studies and analysis conducted during the course of the study. The third section describes the Photovoltaic Satellite Based Satellite Power System (SPS) Point Design as it was defined through studies performed during the period January 1977 through March 1979.

Hanley, G. M.↗
NASA NTRS1977

Solar power satellite. System definition study. Part 1, volume 5: SPS transportation. Representative system descriptions

Both LEO transportation (earth to low earth orbit) and GEO transportation (low earth orbit to geosynchronous orbit) segments were addressed. LEO options include both a 2 stage winged space freighter vehicle and a 2 stage ballistic recoverable vehicle. Both incorporate LO(2)/RP-1/LH(2) engines on the booster and standard SSME's on the upper stage. The orbit transfer vehicle options included chemical for geosynchronous satellite assembly and self powered electric propulsion for low earth orbit satellite assembly. An exhaust products analysis was conducted for the earth to LEO vehicle since atmospheric pollution could be a concern.

Source record↗
NASA NTRS1962

PERFORMANCE OF SPECTRALLY SELECTIVE COLLECTOR SURFACES IN A SOLAR-DRIVEN CARNOT SPACE-POWER SYSTEM

A study was made of the theoretical performance of spectrally selective surfaces when used as the collectors of solar energy for driving heat engine cycles in space. Selective surfaces were considered for which the-monochromatic emissivity changed abruptly at specific wavelengths between 0.5 and 10 microns. The Carnot cycle was used as the heat engine, and waste heat was rejected from a black radiator. Systems using both focused and unfocused radiation were considered. It was found that spectrally selective surfaces hold considerable promise as collectors of solar energy in unfocused systems. The efficiency for these is several times greater than that obtainable from black or gray collectors. However, this advantage of spectral selectivity diminishes if the sunlight is focused on the collector. In highly focused systems, such as those using parabolic mirrors, black collectors give substantially the same efficiency as the most ideal spectrally selective surface.

SOLAR PROPULSION↗
NASA NTRS1974

Terrestrial applications of solar cell powered systems

A study was initiated to search out, list, and evaluate terrestrial applications of solar cells and design systems for those applications that show the most promise for becoming practical and accepted by users within the next five years. From a list of over 65 potential applications, ten were selected for further study. The study culminated in detailed engineering designs of systems for the two most attractive applications.

Moore, W. C.↗
NASA NTRS1977

Solar power satellite. System definition study. Part 1, volume 3: Construction, transportation and cost analyses

Concepts developed for both LEO and GEO construction of photovoltaic and thermal engine satellites are analyzed. Topics discussed include: satellite construction; crew scheduling; crew jobs and organizations; operator productivity rating; constructability rating; transportation systems for cargo launch, refueling operations, personnel transport, and orbit transfer; collision analysis, cost analysis, and radiation evironment and effects.

Source record↗
NASA NTRS1977

Solar power satellite system definition study. Part 2, volume 5: Space operations (construction and transportation)

Construction and transportation systems and operations are described for the following combinations: (1) silicon photovoltaic CR=1 satellite constructed primarily in low earth orbit (LEO); (2) silicon photovoltaic CR=1 satellite constructed in geosynchronous earth orbit (GEO); (3) Rankine thermal engine satellite constructed primarily in LEO; and (4) Rankine thermal engine satellite constructed in GEO.

Miller, K.↗
NASA NTRS1979

Solar power satellite system definition study. Volume 4: Silicon solar cell annealing test, phase 1

Laser annealing tests were conducted on ten 50 micron cells. Two were control cells that were not irradiated. These showed no loss in output due to exposure to the laser. Two cells were broken in handling. Six cells were successfully tested. All cells tested without breakage showed some recovery. One cell was subjected to two cycles and showed recovery on both cycles. Cells that were moderately degraded appeared to recover more completely than those more severly degraded. Exposure times ranged from two to ten seconds at 500 degrees centigrade. There was some indication that longer exposure was beneficial.

Walker, F.↗
NASA NTRS1979

Solar power satellite system definition study. Volume 3: Operations and systems synthesis, phase 2

The results of the operations analyses are reported. Some of these analyses examined operations aspects of space vehicle in-space maintenance. Many of the analyses explored in great depth operations concerned the LEO Base cargo handling operations. Personnel transportation operations and cargo packaging were also analyzed. These operations analyses were performed to define the operational requirements for all of the SPS system elements so that equipment and facilities could be synthesized, and to make estimates of the manpower requirements. An overall, integrated, end-to-end description of the SPS operations is presented. The detailed operations analyses, upon which this integrated description was based, are included.

Source record↗
NASA NTRS1991

Long term integrity for space station power systems

A study was made of the High Temperature Design Codes ASME N47, British R5, and the French RCC-MR Rules. It is concluded that all these codes provide a good basis of design for space application. The new British R5 is the most complete since it deals with the problem of defects. The ASME N47 was subjected longer to practical application and scrutiny. A draft code is introduced, and a proposed draft for high temperature design in which attempts were made to identify gaps and improvements is suggested. The design is limited by creep characteristics. In these circumstances, life is strongly affected by the selected value of the factor of safety. The factor of safety of primary loads adopted in the codes is 1.5. Maybe a lower value of 1.25 is permissible for use in space. Long term creep rupture data for HAYNES 188 is deficient and it is suggested that extrapolation methods be investigated.

Leckie, F. A.↗
NASA NTRS1972

A modular Space Station/Base electrical power system - Requirements and design study.

The requirements and procedures necessary for definition and specification of an electrical power system (EPS) for the future space station are discussed herein. The considered space station EPS consists of a replaceable main power module with self-contained auxiliary power, guidance, control, and communication subsystems. This independent power source may 'plug into' a space station module which has its own electrical distribution, control, power conditioning, and auxiliary power subsystems. Integration problems are discussed, and a transmission system selected with local floor-by-floor power conditioning and distribution in the station module. This technique eliminates the need for an immediate long range decision on the ultimate space base power sources by providing capability for almost any currently considered option.

Eliason, J. T.↗
NASA NTRS1972

Design point characteristics of a 500 - 2500 watt isotope-Brayton power system

An analytical study was conducted to investigate the potential performance characteristics of an isotope-Brayton space power system at electric power levels from 500 - 2500 watts. Utilization of the Pu(238) heat source, or capsule, was assumed. A single-loop system design concept was selected. The design concept and results of first-order trade-off studies of the effects of major system parameters on system performance are presented. Results of the study indicate the potential for high system efficiency and high specific power over the entire power range.

Barna, G. J.↗
NASA NTRS1972

Design point characteristics of a 500 - 2500 watt isotope-Brayton power system.

An analytical study was conducted to investigate the potential performance characteristics of an isotope-Brayton space power system at electric power levels from 500 to 2500 W. Utilization of the Pu 238 heat source, or capsule, being developed for the Multi-Hundred Watt Radioisotope Thermoelectric Generator was assumed. A single-loop system design concept was selected. The design concept and results of first-order tradeoff studies of the effects of major system parameters on system performance are presented. Results of the study indicate the potential for high system efficiency and high specific power over the entire power range.

Barna, G. J.↗