SEARCH · Search NASA

Results for “preventative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

NASA NTRS1954

A Method for Prevention of Screaming in Rocket Engines

Lateral and longitudinal combustion-pressure oscillations that occurred in screaming combustion of a 1000-pound-thrust rocket engine using white fuming nitric acid and JP-4 fuel as propellants were successfully prevented by means of longitudinal fins in the combustion chamber. Fin position was critical, and complete attenuation was achieved only when the fins were located in a zone approximately 8 to 16 inches from the injector. Fins located in other zones, that is, near the injector or far downstream from the injector, did not stop the oscillations. When oscillations occurred in finned chambers, the longitudinal mode seemed more dominant than the lateral mode; in chambers without fins, the lateral mode tended to be dominant. The lateral oscillation was distorted and its intensity diminished by the fins. Fins, however, did not affect the frequencies; the longitudinal frequency varied inversely with chamber length, and lateral frequencies varied only slightly from an average of 6000 cycles per second.

ROCKET ENGINE NOISE↗

NASA NTRS1965

The effect of bedrest on various parameters of physiological function. part vi- the effect of the performance of periodic flack maneuvers on preventing cardiovascular deconditioning of bedrest

Preventing cardiovascular deconditioning of bedrest by periodic Flack maneuvers - physiological performance and efficiency

BED REST↗

NASA NTRS1966

Insert sleeve prevents tube soldering contamination

Teflon sleeve insert prevents contamination of internal tube surfaces by solder compound during soldering operations that connect and seal the tube ends. The sleeve insert is pressed into the mating tube ends with a slight interference fit.

Stein, J.↗

NASA NTRS1966

Polarizing keys prevent mismatch of connector plugs and receptacles

Keying prevents mismatching of plugs and receptacles in connector patching of instrumentation involving several thousand leads. Each receptacle and plug contains three polarizing keys that must mate in a complementary mode before the connector pins and sockets will engage.

Chiapuzio, A.↗

NASA NTRS1965

Adapter assembly prevents damage to tubing during high pressure tests

Portable adapter assembly prevents damage to tubing and injury to personnel when pressurizing a system or during high pressure tests. The assembly is capable of withstanding high pressure. It is securely attached to the tubing stub end and may be removed without brazing, cutting or cleaning the tube.

Stinett, L. L.↗

NASA NTRS1966

Large diameter metal ring seal prevents gas leakage at 5000 psi

Large metal ring seal prevents gas leakage in hydrogen, helium, or nitrogen storage bottles at pressures up to 5,000 psi. The grooved ring seal which contains elastomer O-rings is installed between the mating faces of the access cover and the storage bottle.

Middelkoop, J. H.↗

NASA NTRS1966

Circuit prevents overcharging of secondary cell batteries

Circuit prevents battery cell overcharging by detecting and reducing the charging voltage to the open-circuit voltage of the battery when this current falls to a predetermined value. The voltage control depends on the fact that the charging current falls significantly when the battery nears its fully charged state.

Hennigan, T. J.↗

NASA NTRS1966

Controlled release device prevents damage from dynamic stresses

Controlled release device that retards motion by extruding or drawing a tapered ductile pin through a die will control launch vehicle motion at liftoff. The device prevents the damaging dynamic stresses that are imposed on the vehicle when it is instantaneously released at full thrust.

Burcham, T. W.↗

NASA NTRS1966

Check valve installation in pilot operated relief valve prevents reverse pressurization

Two check valves prevent reverse flow through pilot-operated relief valves of differential area piston design. Title valves control pressure flow to ensure that the piston dome pressure is always at least as great as the main relief valve discharge pressure.

Oswalt, L.↗

NASA NTRS1966

Prevention, Detection, and Suppression of Hydrogen Explosions in Aerospace Vehicles

Prevention, detection, and suppression of hydrogen explosions in aerospace vehicles

AEROSPACE VEHICLE↗

NASA NTRS1967

Undercoat prevents blistering of silver plating at elevated temperatures

Gold undercoat prevents blistering in the silver plating of Inconel 718 seals from steam at high temperatures. The undercoat is diffused into the surface of the parent metal by baking prior to silver plating.

Kuster, C. A.↗

NASA NTRS1967

Toroidal ring prevents gas ignition at vent stack outlet

Torodial ring welded to the vent stack outlet prevents static discharges which ignite combustible gases in a venting system. The ring inhibits the flow of current by removing the cause of turbulence characteristics of a sharply defined vent exit.

Spring, T. R.↗

NASA NTRS1967

Apparatus for fabrication of americium- beryllium neutron sources prevents capsule contamination

Modified gloved enclosure is used to fill a capsule with a mixture of americium and beryllium radioactive powders to seal weld the opening, and to test it for leaks. It contains a horizontal partition, vortex mixer, mounting press, welder, test vessel, and radiation shielding to prevent surface contamination.

Mohr, W. C.↗

NASA NTRS1967

Limit circuit prevents overdriving of operational amplifier

Cutoff-type high gain amplifier coupled by a diode prevents overdriving of operational amplifier. An amplified feedback signal offsets the excess input signal that tends to cause the amplifier to exceed its preset limit. The output is, therfore, held to the set clamp level.

Openshaw, F. L.↗

NASA NTRS1967

Test device prevents weld joint damage by eliminating axial pin forces on unpotted modules

Test device makes electrical connection to pins on unpotted electronic modules without introducing any displacing forces of the pins, thus preventing weld joint damage. The pins are spaced in a potting header, but are free to slide in and out except for restraint from welded wire joints.

Cree, R. E.↗

NASA NTRS1967

Method prevents secondary radiation in radiographic inspection

Thin-walled neoprene containers prevent secondary radiation, scatter, and undercut during radiographic inspection. The containers are filled with a mixture of barium sulfate, red lead, and petroleum jelly that achieves the required absorption rate.

Struckus, A. A.↗

NASA NTRS1967

Accumulator isolator prevents malfunctioning of faulty hydraulic system

Special isolator valve prevents malfunction of a closed hydraulic system by converting the initial accumulator-reservoir to a reservoir function only when the system loses oil, or gaseous nitrogen precharge, or has a jammed piston. This permits near-normal operation until the defect is corrected.

Walsh, G. D.↗

NASA NTRS1968

Adaptive control circuit prevents amplifier saturation

Adaptive control circuit prevents saturation of push-pull output amplifiers used in low-power, low-torque suspension system. The adaptive control circuit senses how near the output amplifiers are to saturation and sets the B voltage in such a way as to keep them just clear of saturation.

Nondsieck, A. J.↗