Search NASA⌕ Search

SEARCH · Search NASA

Results for “procedures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Real-time reconstruction and control of pedestal-top electron density using RMP and gas puff at KSTAR

We report the experimental results of controlling the pedestal-top electron density by applying resonant magnetic perturbation (RMP) with in-vessel control coils and the main gas puff in the 2024-2025 KSTAR experimental campaign. The density is reconstructed using a parameterized $ψ_N$ grid and five channels of line-averaged density measured by the two-colored interferometer (TCI). The reconstruction procedure is accelerated by deploying a multi-layer perceptron to run in approximately 120 µ s and is sufficiently fast for real-time control. A proportional-integral controller was adopted, with the controller gains estimated from the system identification procedure. The experimental results demonstrate that the developed controller can follow a dynamic target while exclusively using both actuators. The absolute percentage errors between the electron density at $ψ_N$ = 0.89 and the target were approximately 1.5% median and a 2.5% average, respectively. The developed controller can even lower the density by using the pump-out mechanism under RMP, and it can follow a more dynamic range of density targets than a single actuator controller. The developed controller will enable experimental scenario exploration within a shot by dynamically setting the density target or maintaining a constant electron density within a discharge.

EFIT↗
DOE OSTI2025

Reversed magnetic shear scenario development in NSTX-U using TRANSP

Abstract Understanding and control of electron thermal transport is a critical point of research in magnetic fusion experiments. Previous experiments have shown that operation with reversed magnetic shear (RMS) can suppress electron thermal transport, resulting in the generation of internal transport barriers (ITBs), with the location of the ITB correlated with the location of minimum magnetic shear. The recent upgrades to NSTX—increased magnetic field up to 1 T, increased plasma current up to 2 MA, 2nd neutral beam—present an increased operating space in which to explore electron thermal transport in RMS plasmas. Utilizing TRANSP, we have developed operating scenarios by which to generate RMS in NSTX-U. The results suggest that RMS in NSTX-U can be generated through fast current ramp and early beam injection into a large plasma volume. This is very similar to the procedure that was followed in both TFTR and NSTX to generate RMS. Sustainment of RMS, disregarding non-( q min = 1) MHD events, requires maintaining a large plasma volume, and increasing the core T e , either via increased plasma current and/or adding heating power. Using this procedure, RMS was sustained for ∼1 s, with q min > 1 for that period.

Galante, M. E. (ORCID:0009000098149425)↗
DOE OSTI2024

An extreme thermal cycling reliability test of ATLAS ITk Strips barrel modules

At the end of Run 3 of the Large Hadron Collider (LHC), the accelerator complex will be upgraded to the High-Luminosity LHC (HL-LHC) in order to increase the total amount of data provided to its experiments. To cope with the increased rates of data, radiation, and pileup, the ATLAS detector will undergo a substantial upgrade, including a replacement of the Inner Detector with a future Inner Tracker, called the ITk. The ITk will be composed of pixel and strip sub-detectors, where the strips portion will be composed of 17,888 silicon strip detector modules. During the HL-LHC running period, the ITk will be cooled and warmed a number of times from about -35°C to room temperature as part of the operational cycle, including warm-ups during yearly shutdowns. To ensure ITk Strips modules are functional after these expected temperature changes, and to ensure modules are mechanically robust, each module must undergo ten thermal cycles and pass a set of electrical and mechanical criteria before it is placed on a local support structure. This paper describes the thermal cycling Quality Control (QC) procedure, and results from the barrel pre-production phase (about 5% of the production volume). Additionally, in order to assess the headroom of the nominal QC procedure of 10 cycles and to ensure modules don't begin failing soon after, four representative ITk Strips barrel modules were thermally cycled 100 times — this study is also described.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Bound states of Ω baryons in light nuclei

Here, we investigate bound states of light Ω 3⁢𝑥 clusters (𝑥=𝑠,𝑐), motivated by the Ω 3⁢𝑠 ⁢𝑁 potential recently developed by the HAL QCD collaboration. To regularize this potential, we remove the deeply attractive core at 𝑟 < 0.4 fm and parametrize the long-range component (𝑟 > 0.4 fm) using a two-range Gaussian form. This procedure preserves the relevant two-body bound-state energy while having a negligible effect on the Ω 3⁢𝑠⁢ 𝑁⁢𝑁 and Ω 3⁢𝑠⁢ Ω 3⁢𝑠 ⁢𝑁 systems. An effective Ω 3⁢𝑠 ⁢𝛼 potential is then constructed by fitting a two-range Gaussian function to the long-range component of the folding potential, enabling calculations of the bound-state energies of the Ω 3⁢𝑠⁢ 𝛼, Ω 3⁢𝑠⁢ 𝛼⁢𝛼, and Ω 3⁢𝑠 ⁢Ω 3⁢𝑠 ⁢𝛼 systems. The regularization procedure leads to a substantial reduction in bound-state energies compared to those obtained with the original potential. We further extend the analysis to Ω 3⁢𝑐 -cluster systems by introducing an Ω 3⁢𝑐 ⁢𝑁 interaction, derived by comparing the existing Ω 3⁢𝑠⁢ Ω 3⁢𝑠 and Ω 3⁢𝑐 ⁢Ω 3⁢𝑐 potentials. Our results suggest that several parametrizations predict bound states in Ω 3⁢𝑐 -containing clusters. Finally, the Ω 3⁢𝑠 ⁢Ω 3⁢𝑠 interaction is described using a contactlike potential approach, motivated by the effective field theory.

binding energy & masses↗
DOE OSTI2024

Searching for cosmological stochastic backgrounds by notching out resolvable compact binary foregrounds with next-generation gravitational-wave detectors

Stochastic gravitational-wave backgrounds can be of either cosmological or astrophysical origin. The detection of an astrophysical stochastic gravitational-wave background with ground-based interferometers is expected in the near future. Perhaps even more excitingly, the detection of stochastic backgrounds of cosmological origin by future ground-based interferometers could reveal invaluable information about the early Universe. From this perspective, the astrophysical background is a foreground that can prevent the extraction of this information from the data. In this paper, we revisit a time-frequency domain notching procedure previously proposed to remove the astrophysical foreground in the context of next-generation ground-based detectors, but we consider the more realistic scenario where we remove individually detectable signals by taking into account the uncertainty in the estimation of their parameters. We find that time-frequency domain masks can still efficiently remove the astrophysical foreground and suppress it to about 5% of its original level. Further removal of the foreground formed by unresolvable events (in particular, unresolvable binary neutron stars), which is about 10 times larger than the residual foreground from realistic notching, would require detector sensitivity improvements. Therefore, the main limitation in the search for a cosmological background is the unresolvable foreground itself, and not the residual of the notching procedure.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Moments of parton distribution functions of any order from lattice QCD

We describe a procedure to determine moments of parton distribution functions of any order in lattice quantum chromodynamics (QCD). The procedure is based on the gradient flow for fermion and gauge fields. The flowed matrix elements of twist-2 operators renormalize multiplicatively, and the matching with the physical matrix elements can be obtained using continuum symmetries and the irreducible representations of Euclidean 4-dimensional rotations. We calculate the matching coefficients at one-loop in perturbation theory for moments of any order in the flavor nonsinglet case. We also give specific examples of operators that could be used in lattice QCD computations. It turns out that it is possible to choose operators with identical Lorentz indices and still have a multiplicative matching. One can thus use twist-2 operators exclusively with temporal indices, thus substantially improving the signal-to-noise ratio in the computation of the hadronic matrix elements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Graph reinforcement learning for exploring model spaces beyond the standard model

We present a methodology for performing scans of beyond the standard model (BSM) parameter spaces with reinforcement learning. We identify a novel procedure using graph neural networks that is capable of exploring spaces of models without the user specifying a fixed particle content, allowing broad classes of BSM models to be explored—in theory, the technique is applicable to nearly any model space with a prespecified gauge group. We provide a generic procedure by which a suitable graph grammar can be developed for any BSM model that features user-specified symmetry groups and a finite number of different possible particle species, the use of which is applicable to a variety of machine learning tasks over the actions of BSM theories beyond our particular reinforcement learning use case. As a proof of concept, we construct the graph grammar for theories with vectorlike leptons that may or may not be charged under a dark U ( 1 ) group, inspired by portal matter extensions of the sub-GeV vector portal/kinetic mixing simplified dark matter models. We then use this graph grammar to create a reinforcement learning environment tasked with creating models with these vectorlike leptons that are consistent with a list of a variety of precision observables. The reinforcement learning agent succeeds in developing models that can address the observed muon anomalous magnetic moment discrepancy while remaining consistent with flavor violation and electroweak precision observables, including both constructions that have previously been studied as well as new models that have not, to our knowledge, previously been identified. By inspecting the resulting ensembles of models that the agent produces and experimenting with different configurations for our reinforcement learning environment and graph grammar, we also infer various lessons about the development of these environments that can be transferable to reinforcement learning scans of more complicated model spaces and comment on future directions for the development of this technique into a more mature tool. Published by the American Physical Society 2025

Wojcik, George N.↗
DOE OSTI2025

Signal processing and spectral modeling for the BeEST experiment

The Beryllium Electron capture in Superconducting Tunnel junctions (BeEST) experiment searches for evidence of heavy neutrino mass eigenstates in the nuclear electron capture decay of 7 Be by precisely measuring the recoil energy of the 7 Li daughter. In Phase III, the BeEST experiment has been scaled from a singl superconducting tunnel junction (STJ) sensor to a 36-pixel array to increase sensitivity and mitigate gamma-induced backgrounds. Phase III also uses a new continuous data acquisition system that greatly increases the flexibility for signal processing and data cleaning. Here, we have developed procedures for signal processing and spectral fitting that are sufficiently robust to be automated for large datasets. Furthermore, this article presents the optimized procedures before unblinding the majority of the Phase III dataset to search for physics beyond the standard model.

6 ≤ A ≤ 19↗
DOE OSTI2024

(2 + δ)-dimensional theory of the electromechanics of lipid membranes: Electrostatics

The coupling of electric fields to the mechanics of lipid membranes gives rise to intriguing electromechanical behavior, as, for example, evidenced by the deformation of lipid vesicles in external electric fields. Electromechanical effects are relevant for many biological processes, such as the propagation of action potentials in axons and the activation of mechanically gated ion channels. Currently, a theoretical framework describing the electromechanical behavior of arbitrarily curved and deforming lipid membranes does not exist. Purely mechanical models commonly treat lipid membranes as two-dimensional surfaces, ignoring their finite thickness. While holding analytical and numerical merit, this approach cannot describe the coupling of lipid membranes to electric fields and is thus unsuitable for electromechanical models. In a sequence of articles, we derive an effective surface theory of the electromechanics of lipid membranes, called the (2 + δ)-dimensional theory, which has the advantages of surface descriptions while accounting for finite thickness effects. The present article proposes a generic dimension reduction procedure relying on low-order spectral expansions. This procedure is applied to the electrostatics of lipid membranes to obtain the (2 + δ)-dimensional theory that captures potential differences across and electric fields within lipid membranes. Finally, this model is tested on different geometries relevant for lipid membranes, showing good agreement with the corresponding three-dimensional electrostatics theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Rapid Initial-State Preparation for the Quantum Simulation of Strongly Correlated Molecules

Studies on quantum algorithms for ground-state energy estimation often assume perfect ground-state preparation; however, in reality the initial state will have imperfect overlap with the true ground state. Here, we address that problem in two ways: by faster preparation of matrix-product-state (MPS) approximations and by more efficient filtering of the prepared state to find the ground-state energy. We show how to achieve unitary synthesis with a Toffoli complexity about 7 × lower than that in prior work and use that to derive a more efficient MPS-preparation method. For filtering, we present two different approaches: sampling and binary search. For both, we use the theory of window functions to avoid large phase errors and minimize the complexity. We find that the binary-search approach provides better scaling with the overlap at the cost of a larger constant factor, such that it will be preferred for overlaps less than about 0.003 . Finally, we estimate the total resources to perform ground-state energy estimation of Fe - S cluster systems, including the Fe Mo cofactor by estimating the overlap of different MPS initial states with potential ground states of the Fe Mo cofactor using an extrapolation procedure. With a modest MPS bond dimension of 4000 , our procedure produces an estimate of approximately 0.9 overlap squared with a candidate ground state of the Fe Mo cofactor, producing a total resource estimate of 7.3 × 10 10 Toffoli gates; neglecting the search over candidates and assuming the accuracy of the extrapolation, this validates prior estimates that have used perfect ground-state overlap. This presents an example of a practical path to prepare states of high overlap in a challenging-to-compute chemical system. Published by the American Physical Society 2025

Berry, Dominic W. (ORCID:0000000334461449)↗
DOE OSTI2024

Leveraging BERT and Network-Based Attention Analysis for Identifying Treatment Milestones in EHRs

This study introduces a sophisticated data-driven framework for analyzing Electronic Health Records (EHRs) using transformer-based models to identify and disentangle overlapping treatment contexts. The framework leverages a preprocessing pipeline that transforms structured procedural codes into semantically enriched descriptive text, enabling the use of attention mechanisms to cluster medical events into treatment milestones—cohesive and distinct components of care processes. The methodology is rigorously validated using synthetic datasets derived from the MIMIC-III database, designed to simulate the heterogeneity and overlapping procedural contexts characteristic of real-world EHR scenarios. Quantitative evaluation highlights the framework’s robustness in disentangling concurrent care pathways, with attention metrics and unsupervised clustering approaches demonstrating the ability to preserve intra-context relationships while distinguishing inter-context dependencies. By addressing challenges inherent in data heterogeneity, this approach provides a foundation for uncovering complex treatment patterns, advancing clinical decision-making, and optimizing resource allocation in diverse healthcare environments.

Kim, Minsu [ORNL] (ORCID:0000000224185535)↗
DOE OSTI2024

Development of a Distribution Optimal Power Flow Federate for Open-Source OEDI-SI Platform

Increasing numbers of distributed generators in the electric power distribution networks require developing a control strategy to optimize solutions in real time. Linearized optimal distribution flow development has seen growth and acceptance in the distribution systems literature for efficiently modeling the \glspl{opf} for distribution systems. This paper examines the implementation and integration procedure for linearized optimal distribution flow federate to \gls{oedisi} platform. Specifically, we discuss i) the usage of the \gls{oedisi} platform, ii) obtaining a tractable solution using developed \gls{opf} federate, and iii) validation of solutions and bench-marking the \gls{oedisi} platform with developed \gls{opf} federate using OpenDSS. In brief, we demonstrate how a general linearized optimal distribution flow federate can be developed and integrated with a co-simulation environment to mimic real-world examples. The efficacy of the proposed method is demonstrated using the IEEE 123-bus test system under different scenarios to obtain a tractable solution and compare its results.

Sadnan, Rabayet↗
DOE OSTI2025

Spectral Clustering-Based Partitioning of Large-Scale Power Electronics-Based Power Systems for Small-Signal Stability Analysis

The nodal admittance matrix (NAM)-based approach is well-suited for small-signal stability analysis of large-scale power electronics-based power systems (PEPSs), as it preserves the system structure through its admittance matrix. Previous studies have explored partitioning such systems into subareas and interconnections to reduce computational burden; however, they lacked a formal algorithmic procedure for determining feasible partitions. While several grid partitioning methods, such as those based on graph theory or machine learning, exist in the literature, they cannot be directly applied to NAM-based analysis due to differing objectives and constraints. Here, this paper addresses this gap by presenting a systematic, step-by-step procedure for applying a spectral partitioning algorithm that yields a division of the system into subareas suitable for NAM-based analysis. The computational complexity of the proposed method is also derived to demonstrate its efficiency and justify the practicality of the resulting subarea decomposition. The performance of the partitioning method is evaluated by applying the spectral clustering-derived subareas and interconnections to the NAM-based partitioning approach on a 140-bus system. Computational times for the full-system and partitioned NAM analyses are compared using MATLAB. Additionally, PSCAD simulations of the complete system and partitioned subareas are carried out to verify the effectiveness of the proposed method.

Nupur [Univ. of Tennessee, Knoxville, TN (United S↗
DOE OSTI2025

Controlled Shifts of X-ray Emission Lines Measured with Transition Edge Sensors at the Advanced Photon Source

The measurement of shifts in the energy of X-ray emission lines is important for understanding the electronic structure and physical properties of materials. In this study, we demonstrate a method using a synchrotron source to introduce controlled eV-scale shifts of a narrow line in between fixed-energy fluorescence lines. We use this to characterize the ability of a hard X-ray superconducting Transition Edge Sensor (TES) array to measure line shifts. Fixed fluorescence lines excited by higher harmonics of the monochromatic X-ray beam are used for online energy calibration, while elastic scattering from the primary harmonic acts as the variable energy emission line under study. We use this method to demonstrate the ability to track shifts in the energy of the elastic scattering line of magnitude smaller than the TES energy resolution, and find we are ultimately limited by our calibration procedure. The method can be applied over a wide X-ray energy range and provides a robust approach for the characterization of the ability of high-resolution detectors to detect X-ray emission line shifts, and the quantitative comparison of energy calibration procedures.

Guruswamy, Tejas (ORCID:0000000241656765)↗
DOE OSTI2025

Fabrication of a Nb-Ti Superconducting Closed-Loop Coil for the Next-Generation 45 GHz ECR Ion Source MARS-D

Electron Cyclotron Resonance Ion Sources (ECRISs) that utilize Nb-Ti superconducting coils for 28 GHz frequencies have been operating effectively for over twenty years. However, transitioning to higher frequencies demands stronger magnetic fields, and the conventional racetrack-and-solenoid ECRIS structures have reached their maximum capability with Nb-Ti. To address this, a Mixed Axial and Radial field System Demonstrator (MARS-D) is being developed at Lawrence Berkeley National Laboratory (LBNL). This system features an innovative Closed-Loop Coil (CLC) design that optimizes the use of the conductor fields, enabling the application of Nb-Ti in the next-generation 45 GHz ECRISs. The fabrication of the hexagonal CLC is particularly challenging due to its complex winding path and shape, the stiffness of the Nb-Ti superconducting wire, and the small bending radius. Here, to address these challenges, a series of unique fixtures and tools, as well as a pre-over-bending method, were developed for winding the CLC. To validate the winding fixtures, tools, procedures, and materials used in the coil assembly, a 4-layer practice CLC was wound, epoxy-impregnated, and then cold-tested using liquid nitrogen. The full-size MARS-D CLC is in the process of winding. This paper presents the structure of the MARS-D CLC, the winding fixtures and tools, the winding procedures, the quality control, the impregnation, the test results, and the potential future improvements.

ECR ion sources↗
DOE OSTI2025

Calibration of RAFM Micromechanical Model for Creep Using Bayesian Optimization for Functional Output

A Bayesian optimization procedure is presented for calibrating a multimechanism micromechanical model for creep to experimental data of F82H steel. Reduced activation ferritic martensitic (RAFM) steels based on Fe(8–9)%Cr are the most promising candidates for some fusion reactor structures. Although there are indications that RAFM steel could be viable for fusion applications at temperatures up to 600°C, the maximum operating temperature will be determined by the creep properties of the structural material and the breeder material compatibility with the structural material. Due to the relative paucity of available creep data on F82H steel compared to other alloys such as Grade 91 steel, micromechanical models are sought for simulating creep based on relevant deformation mechanisms. As a point of departure, this work recalibrates a model form that was previously proposed for Grade 91 steel to match creep curves for F82H steel. Due to the large number of parameters (9) and cost of the nonlinear simulations, an automated approach for tuning the parameters is pursued using a recently developed Bayesian optimization for functional output (BOFO) framework (Huang et al., 2021, “Bayesian optimization of functional output in inverse problems,” Optim. Eng., 22, pp. 2553–2574). Incorporating extensions such as batch sequencing and weighted experimental load cases into BOFO, a reasonably small error between experimental and simulated creep curves at two load levels is achieved in a reasonable number of iterations. In conclusion, validation with an additional creep curve provides confidence in the fitted parameters obtained from the automated calibration procedure to describe the creep behavior of F82H steel.

42 ENGINEERING↗
DOE OSTI2024

Multilevel Parareal Algorithm with Averaging for Oscillatory Problems

The present study is an extension of the work done by Peddle, Haut, and Wingate and Haut and Wingate, where a two-level Parareal method with mapping and averaging is examined. The method proposed in this paper is a multilevel Parareal method with arbitrarily many levels, which is not restricted to the two-level case. We give an asymptotic error estimate which reduces to the two-level estimate for the case when only two levels are considered. Introducing more than two levels has important consequences for the averaging procedure, as we choose separate averaging windows for each of the different levels, which is an additional new feature of the present study. The different averaging windows make the proposed method especially appropriate for nonlinear multiscale problems, because we can introduce a level for each intrinsic scale of the problem and adapt the averaging procedure such that we reproduce the behavior of the model on the particular scale resolved by the level. The method is applied to nonlinear differential equations. The nonlinearities can generate a range of frequencies in the problem. The computational cost of the new method is investigated and studied on several examples.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Coupling and recoupling coefficients for Wigner’s U(4) supermultiplet symmetry

A novel procedure for evaluating Wigner coupling coefficients and Racah recoupling coefficients for U(4) in two group–subgroup chains is presented. The canonical U(4) > U(3) > U(2) > U(1) coupling and recoupling coefficients are applicable to any system that possesses U(4) symmetry, while the physical U(4) coupling coefficients are more specific to nuclear structure studies that utilize Wigner’s supermultiplet symmetry concept. The procedure that is proposed sidesteps the use of binomial coefficients and alternating sum series and consequently enables fast and accurate computation of any and all U(4)-underpinned features. The inner multiplicity of a (S, T) pair within a single U(4) > SU S (2) Ⓧ SU T (2) irreducible representation is obtained from the dimension of the null space of the SU(2) raising generators, while the resolution for the outer multiplicity follows from the work of Alex et al. on U(N) . It is anticipated that a C++ library will ultimately be available for determining generic coupling and recoupling coefficients associated with both the canonical and the physical group–subgroup chains of U(4).

Cross-Coupling Reaction↗