SEARCH · Search NASA

Results for “quick simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Towards Resilient Near Real-Time Analysis Workflows in Fusion Energy Science

Nuclear fusion holds the promise of an endless source of energy. Several research experiments across the world and joint modeling and simulation efforts between the nuclear physics and high performance computing communities are actively preparing the operation of the International Thermonuclear Experimental Reactor (ITER). Both experimental reactors and their simulated counterparts generate data that must be analyzed quickly and in a resilient way to support decision making for the configuration of subsequent runs or prevent a catastrophic failure. However, the cost if the traditional techniques used to improve the resilience of analysis workflows, i.e., replicating datasets and computational tasks, becomes prohibitive with explosion of the volume of data produced by modern instruments and simulations. Therefore, we advocate in this paper for an alternate approach based on data reduction and data streaming. The rationale is that by allowing for a reasonable, controlled, and guaranteed loss of accuracy it becomes possible to transfer smaller amounts of data, shorten the execution time of analysis workflows, and lower the cost of replication to increase resilience. We develop our research and development roadmap towards resilient near real-time analysis workflows in fusion energy science and present early results showing that data streaming and data reduction is a promising way to speed up the execution and improve the resilience of analysis workflows.

Suter, Fred↗

DOE OSTI2022

Reversible Solid Oxide Fuel Cell Systems for Energy Storage and Hydrogen Production

FuelCell Energy (FCE) studied the performance, design, and economics of a reversible solid-oxide fuel cell/electrolyzer integrated with a natural gas-based electricity generation plant and used as an energy storage system. Increased market penetration of renewable energy is challenging for operators of fossilbased plants which are not suited for quick turndown and ramp-up. Process simulations studies show that with utilization of waste heat from the power plant, a high roundtrip efficiency (RTE) around 70% is possible, providing excellent market potential for this energy storage technology, potentially providing improved economics and lifetime for such power plant. The market potential and economics as a function of production volume are analyzed in detail. FCE is continuing the development and commercialization of its solid oxide technology.

08 HYDROGEN↗

NASA NTRS1984

High precision active nutation control for a flexible momentum biased spacecraft

The controller design for the Solar Dynamics Observatory (SDO) is presented. SDO is a momentum biased spacecraft with three flexible appendages. Its primary scientific instrument, the solar oscillations imager (SOI), is rigidly attached to the spacecraft bus and has arc-second pointing requirements. Meeting these requirements necessitates the use of an active nutation controller (ANC) which is here mechanized with a small reaction wheel oriented along a bus transverse axis. The ANC does its job by orchestrating the transfer of angular momentum out of the bus transverse axes and into the momentum wheel. A simulation study verifies that the controller provides quick, stable, and accurate response.

Laskin, R. A.↗

NASA NTRS1995

A conjecture on global flow dynamics

Recent observations by the Yohkoh and Ulysses spacecraft have instilled a new appreciation for the role of the ever-evolving geometry and topology of the coronal magnetic structure in shaping and influencing the global solar wind outflow. While many issues concerning the global evolution of large-scale interplanetary flow structures await resolution, we focus here on one specific problem. Namely, we argue that when considering the impact of solar activity on heliosphere scales, rather more attention should be directed toward ascertaining the nature and implications of long-term. Large-scale changes in the corona than toward the more dramatic and highly visible manifestations of solar activity, such as flares and coronal mass ejections (CMEs). That is, while energetic CMEs unquestionably disrupt the interplanetary medium locally and for a time by the broader measure they prompt lasting, wide-spread heliospheric response only when they occur as the agent of substantial, long-term change in the global configuration of the corona. In support, we point to various evidences of coronal change associated with major episodes of heliospheric disruption, and we discuss the limitations imposed by current observation techniques. In addition, we offer dynamical arguments (illustrated by a simple dynamical simulation) that when the coronal configuration changes quickly enough over sufficient spatial scale, a re-adjustment wave linking the initial and final quasi-steady flow states must propagate out from the Sun. This wave is transitory and global, and its amplitude can grow to substantial proportions with heliocentric distance. Moreover, the readjustment wave occurs whether or not the corona needs to expel CMEs to reconfigure itself. We suggest that it is this wave (and not so much the remnants of the initiating CMEs) that constitutes global merged interaction regions in the outer heliosphere.

Pizzo, V. J.↗

DOE OSTI2023

Enhanced dynamic contingency analysis for power systems

The present disclosure describes systems and techniques that enhance effectiveness and efficiency of a contingency analysis tool that is used for studying the magnitude and likelihood of extreme contingencies and potential cascading events across a power system. The described systems and techniques include deploying the contingency analysis tool in a high-performance computing (HPC) environment and incorporating visual situational awareness approaches to allow power system engineers to quickly and efficiently evaluate multiple power system simulation models. Furthermore, the described systems and techniques include the power system contingency-analysis tool calculating and coordinating protection element settings, as well as assessing controls of the power system using small-signal nomograms, allowing power system engineers to more effectively comprehend, evaluate, and analyze causes and effects of cascading events against a topology of a power system.

Samaan, Nader A.↗

DOE OSTI2020

Parallel algorithms for hyperdynamics and local hyperdynamics

Hyperdynamics (HD) is a method for accelerating the timescale of standard molecular dynamics (MD). It can be used for simulations of systems with an energy potential landscape that is a collection of basins, separated by barriers, where transitions between basins are infrequent. HD enables the system to escape from a basin more quickly while enabling a statistically accurate renormalization of the simulation time, thus effectively boosting the timescale of the simulation. In [Kim, Perez, Voter, J Chem Phys, 139:144110, 2013)1, a local version of HD was formulated, which exploits the intrinsic locality characteristic typical of most systems to mitigate the poor scaling properties of standard HD as the system size is increased. In this paper, we discuss how both HD and local HD can be formulated to run efficiently in parallel. We have implemented these ideas in the LAMMPS MD code, which means HD can be used with any interatomic potential LAMMPS supports. Together, these parallel methods allow simulations of any size to achieve the time acceleration offered by HD (which can be orders of magnitude), at a cost 3-5x that of standard MD. As examples, we performed two simulations of a million-atom system to model the diffusion and clustering of Pt adatoms on a large patch of Pt(100) surface for 80 and 160 μs.

74 ATOMIC AND MOLECULAR PHYSICS↗

NASA NTRS2000

Self-Tuning of Design Variables for Generalized Predictive Control

Three techniques are introduced to determine the order and control weighting for the design of a generalized predictive controller. These techniques are based on the application of fuzzy logic, genetic algorithms, and simulated annealing to conduct an optimal search on specific performance indexes or objective functions. Fuzzy logic is found to be feasible for real-time and on-line implementation due to its smooth and quick convergence. On the other hand, genetic algorithms and simulated annealing are applicable for initial estimation of the model order and control weighting, and final fine-tuning within a small region of the solution space, Several numerical simulations for a multiple-input and multiple-output system are given to illustrate the techniques developed in this paper.

Lin, Chaung↗

NASA NTRS1999

Neural Network and Regression Approximations Used in Aircraft Design

NASA Lewis Research Center's CometBoards Test Bed was used to create regression and neural network models for a High-Speed Civil Transport (HSCT) aircraft. Both approximation models that replaced the actual analysis tool predicted the aircraft response in a trivial computational effort. The models allow engineers to quickly study the effects of design variables on constraint and objective values for a given aircraft configuration. For example, an engineer can change the engine size by 1000 pounds of thrust and quickly see how this change affects all the output values without rerunning the entire simulation. In addition, an engineer can change a constraint and use the approximation models to quickly reoptimize the configuration. Generating the neural network and the regression models is a time-consuming process, but this exercise has to be carried out only once. Furthermore, an automated process can reduce calculations substantially.

Patnaik, Surya N.↗

NASA NTRS2016

A Robust Method to Integrate End-to-End Mission Architecture Optimization Tools

End-to-end mission simulations include multiple phases of flight. For example, an end-to-end Mars mission simulation may include launch from Earth, interplanetary transit to Mars and entry, descent and landing. Each phase of flight is optimized to meet specified constraints and often depend on and impact subsequent phases. The design and optimization tools and methodologies used to combine different aspects of end-to-end framework and their impact on mission planning are presented. This work focuses on a robust implementation of a Multidisciplinary Design Analysis and Optimization (MDAO) method that offers the flexibility to quickly adapt to changing mission design requirements. Different simulations tailored to the liftoff, ascent, and atmospheric entry phases of a trajectory are integrated and optimized in the MDAO program Isight, which provides the user a graphical interface to link simulation inputs and outputs. This approach provides many advantages to mission planners, as it is easily adapted to different mission scenarios and can improve the understanding of the integrated system performance within a particular mission configuration. A Mars direct entry mission using the Space Launch System (SLS) is presented as a generic end-to-end case study. For the given launch period, the SLS launch performance is traded for improved orbit geometry alignment, resulting in an optimized a net payload that is comparable to that in the SLS Mission Planner's Guide.

Lugo, Rafael↗

DOE OSTI2022

Evaluation of the Effect of Burnup Acceleration on UO 2 Microstructure Evolution

Accelerated fuel qualification (AFQ) is a methodology by which new nuclear fuels are developed in an accelerated time frame compared with historical fuel qualification approaches. AFQ generally relies on high-fidelity physics-based modeling and simulation tools to adequately describe fuel performance as well as on revolutionary methods to accelerate burnup accumulation and collect relevant data more quickly. This report summarizes the use of advanced fuel modeling and simulation tools to evaluate microstructures from commercially irradiated fuel and microstructures from proposed MiniFuel irradiations, in which burnup accumulation is accelerated while prototypic temperature conditions are maintained. In this milestone, we used the mesoscale fuel performance code MARMOT to model the evolution of irradiated UO 2 microstructures and their potential restructuring at high burnup. The simulation conditions were informed by BISON models of both commercially irradiated fuel and MiniFuel. A first set of simulations investigated the recrystallization behavior of fully dense microstructures and showed full recrystallization at burnups as low as 52 MWd/kgU at 950°C. However, these simulations did not account for the presence of fission gas bubbles (predicted by BISON). Therefore, a second set of simulations including fission gas bubbles was performed and indicated that at the lowest temperature considered (650°C), the porous UO 2 microstructures have the highest total Gibbs free energies and are likely to recrystallize earlier than higher temperature cases (800 and 950°C), which agrees with high-burnup fuel characterization data. The results also showed that at lower temperature (650°C), the total free energies of the PWR fuel and MiniFuel microstructures are not significantly different. However, at the highest temperature (950°C), MiniFuel microstructures have a lower free energy than that of the PWR fuel microstructure. The competing effects between the temperature-dependent grain nucleation rate and the reduction of the free energy of the microstructure at higher temperature as a result of diffusion indicated that restructuring may occur at even higher temperatures than those considered in this study. In addition to the microstructure evolution modeling efforts, the burnup gradient across a single fuel specimen was also considered. This evaluation was for the VXF-15 position of the High Flux Isotope Reactor (HFIR) using the code suite HFIRCON, which was developed to automate the workflow for evaluating targets and fuel as they are irradiated in HFIR. The burnup gradient evaluation showed a dependence on both the axial and radial locations within the specimen, with a maximum difference of 1.7 between the inner and outermost radial layers. This relationship was further supported by considering the fission product speciation with respect to location within the specimen, which showed a higher concentration of 239 Pu, 240 Pu, and 241 Pu on the outer radial locations of the specimen than the center. The findings of the burnup and speciation evaluation show that some amount of self-shielding is occurring in the specimen when irradiated in the high-flux environment of HFIR; however, this impact is more pronounced for natural uranium when compared to 6% enrichment due to the higher ratio of 238 U in the specimen. Further analyses are required to understand the sensitivity of this gradient to spatial mesh and enrichment of the specimen.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

Multiscale Modeling of Radiation Damage in UO 2 under Accelerated Burnup Conditions

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS1997

A Functional Simulator of Spacecraft Resources

The SPAcecraft SIMulator (SPASIM) simulates the functions and resources of a spacecraft to quickly perform Phase A trade-off analyses and uncover any operational bottlenecks during any part of the mission. Failure modes and operational contingencies can be evaluated allowing optimization for a range of mission scenarios. The payloads and subsystems are simulated, using a hierarchy of graphical models, in terms of how their functions affect resources such as propellant, power, and data. Any of the inputs and outputs of the payloads and subsystems can be plotted during the simulation. Most trade-off analyses, including those that compare current versus advanced technology, can be performed by changing values in the parameter menus. However, when a component is replaced by one with a different functional architecture, its graphical model can also be modified or replaced by drawing from a component library. SPASIM has been validated using several spacecraft designs which were at least at the Critical Design Review level. The user and programmer guide, including figures, is available on line as a hyper text document. This is an easy-to-use and expand tool which is based on MATLAB and SIMULINK. It runs on SGI workstations and PCs under Windows 95 or NT.

Liceaga, Carlos A.↗

DOE OSTI2020

Reinforcement learning for bluff body active flow control in experiments and simulations

Significance Reinforcement learning (RL) has been applied effectively in games and robotic manipulation. We demonstrate the effectiveness of RL in experimental fluid mechanics by applying it to reduce the drag of circular cylinders in turbulent flow, a canonical fluid–structure interaction problem. Although physics agnostic, RL managed to reduce the drag by 30 % or reach another specified optimum point very quickly. Following this discovery, we used high-fidelity simulations to probe the underlying physical mechanisms so that the discovered control techniques can be generalized to other similar flow problems. More broadly, RL-guided active control can lead to efficient exploration of additional flow-control strategies in experimental fluid mechanics, potentially paving the way for accelerating scientific discovery and different designs in flow-related engineering problems.

42 ENGINEERING↗

NASA NTRS1997

SPASIM: A Spacecraft Simulator

The SPAcecraft SIMulator (SPASIM) simulates the functions and resources of a spacecraft to quickly perform conceptual design (Phase A) trade-off and sensitivity analyses and uncover any operational bottlenecks during any part of the mission. Failure modes and operational contingencies can be evaluated allowing operational planning (what-if scenarios) and optimization for a range of mission scenarios. The payloads and subsystems are simulated, using a hierarchy of graphical models, in terms of how their functions affect resources such as propellant, power, and data. Any of the inputs and outputs of the payloads and subsystems can be plotted during the simulation or stored in a file so they can be used by other programs. Most trade-off analyses, including those that compare current versus advanced technology, can be performed by changing values in the parameter menus. However, when a component is replaced by one with a different functional architecture, its graphical model can also be modified or replaced by drawing from a component library. SPASIM has been validated using several spacecraft designs that were at least at the Critical Design Review level. The user and programmer guide, including figures, is available on line as a hypertext document. This is an easy-to-use and expandable tool which is based on MATLAB(R) and SIMULINK(R). It runs on Silicon Graphics Inc. workstations and personal computers with Windows 95(TM) or NT(TM).

Liceaga, Carlos A.↗

NASA NTRS1983

A mobile work station concept for mechanically aided astronaut assembly of large space trusses

This report presents results of a series of truss assembly tests conducted to evaluate a mobile work station concept intended to mechanically assist astronaut manual assembly of erectable space trusses. The tests involved assembly of a tetrahedral truss beam by a pair of test subjects with and without pressure (space) suits, both in Earth gravity and in simulated zero gravity (neutral buoyancy in water). The beam was assembled from 38 identical graphite-epoxy nestable struts, 5.4 m in length with aluminum quick-attachment structural joints. Struts and joints were designed to closely simulate flight hardware. The assembled beam was approximately 16.5 m long and 4.5 m on each of the four sides of its diamond-shaped cross section. The results show that average in-space assembly rates of approximately 38 seconds per strut can be expected for struts of comparable size. This result is virtually independent of the overall size of the structure being assembled. The mobile work station concept would improve astronaut efficiency for on-orbit manual assembly of truss structures, and also this assembly-line method is highly competitive with other construction methods being considered for large space structures.

Heard, W. L., Jr.↗

DOE OSTI2023

Seeking Self-regulating Simulations of Idealized Milky Way–like Galaxies

Abstract Precipitation is potentially a mechanism through which the circumgalactic medium (CGM) can regulate a galaxy’s star formation. Here, we present idealized simulations of isolated Milky Way–like galaxies intended to examine the ability of galaxies to self-regulate their star formation, in particular via precipitation. We also examine the impact of rotation in the CGM. Using six simulations, we explore variations in the initial CGM t cool / t ff ratio and rotation profile. Those variations affect the amount of gas accretion and star formation within the galactic disk. To encourage this accretion and better study its dependence on CGM structure, we gradually increase the efficiency of stellar feedback during the first half of our simulations. Yet despite this gradual increase, the resulting outflows quickly evacuate large, hot cavities within the CGM and even beyond r 200 . Some of the CGM gas avoids interacting with the cavities and is able to feed the disk along its midplane, but the cooling of feedback-heated gas far from the midplane is too slow to supply the disk with additional gas. Our simulations illustrate the importance of physical mechanisms in the outer CGM and IGM for star formation regulation in Milky Way–scale halos.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Screening of Therapeutic Agents for COVID-19 Using Machine Learning and Ensemble Docking Studies

The current pandemic demands a search for therapeutic agents against the novel coronavirus SARS-CoV-2. In this work, we present an efficient computational strategy that combines machine learning (ML)-based models and high-fidelity ensemble docking studies to enable rapid screening of possible therapeutic ligands. Targeting the binding affinity of molecules for either the isolated SARS-CoV-2 S-protein at its host receptor region or the S-protein:human ACE2 interface complex, we screen ligands from drug and biomolecule data sets that can potentially limit and/or disrupt the host-virus interactions. Top scoring one hundred eighty-seven ligands (with 75 approved by the Food and Drug Administration) are further validated by all atom docking studies. Important molecular descriptors ( 2 χ n , topological surface area, and ring count) and promising chemical fragments (oxolane, hydroxy, and imidazole) are identified to guide future experiments. Overall, this work expands our knowledge of small-molecule treatment against COVID-19 and provides a general screening pathway (combining quick ML models with expensive high-fidelity simulations) for targeting several chemical/biochemical problems.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2026

The Complexation Properties of Self-Defensive Microgel-Modified Antimicrobial Surfaces

The complexation of cationic antimicrobials with polyanionic microgels on a biomaterial surface can render that surface self-defensive against bacteria by killing those bacteria which physically contact the antimicrobial-loaded microgels. This killing has been attributed to the contact-driven transfer of antimicrobial from a microgel to a challenging bacterium, though much remains unknown about this process. Here, in this study, we use a combination of experiments and computational modeling to identify key aspects of the complexation phenomena which influence the self-defensive properties. We synthesize poly(acrylic acid) (PAA) microgels (∼2–5 μm diameter) via membrane emulsification and electrostatically deposit them onto polycaprolactone (PCL) coupons or onto glass to form a discontinuous submonolayer. Subsequent microgel loading with colistin or with Sub5 antimicrobial peptide (AMP) causes microgel deswelling. Under physiological conditions Sub5 remains stably sequestered whereas colistin is quickly released. Coarse-grained molecular dynamics (CGMD) simulations confirm stronger Sub5/PAA complexation. CGMD calculations also indicate that Sub5 forms dimers and higher-order structures, a prediction confirmed experimentally by Small-Angle X-ray Scattering (SAXS). Supramolecular structure entropically enhances the complexation strength because of enhanced counterion release per complexation event, and this finding can help identify other antimicrobials well suited for such a nonelutive yet self-defensive strategy. CGMD simulations also show that Sub5 has a higher complexation strength with the Staphylococcus aureus membrane than it does with PAA, confirming that there is a thermodynamic driving force for antimicrobial transfer. Such self-defensive surfaces significantly reduce S. aureus colonization (over 90% reduction relative to unmodified controls) in an in vitro hematogenous contamination model and remain cyto-compatible as evidenced by mesenchymal stem cell spreading and proliferation.

36 MATERIALS SCIENCE↗