Search NASA⌕ Search

SEARCH · Search NASA

Results for “radius equation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Solvability condition for needle crystals at large undercooling in a nonlocal model of solidification

It is explicitly shown that, in a realistic model of diffusion-controlled dendritic solidification, Ivantsov's continuous family of steady-state needle crystals is destroyed by the addition of surface tension. The starting point is in the exact integro-differential equation for the one-sided model, in two dimensions, in a moving frame of reference. In the limit of large undercooling, where the range of the diffusion field is much smaller than the radius of curvature of the tip of the needle, this problem is reduced to a linear, inhomogeneous differential equation of infinite order. A solvability condition for this equation is derived and it is shown that solutions cease to exist for arbitrarily small but finite isotropic surface tension.

Caroli, B.↗
NASA NTRS2023

Relationship Between the Sub-Micron Fraction (SMF) and Fine-Mode Fraction (FMF) in the Context of AERONET Retrievals

The sub-micron (SM) aerosol optical depth (AOD) is an optical separation based on the fraction of particles below a specified cutoff radius of the particle size distribution (PSD) at a given particle radius. It is fundamentally different from spectrally separated FM (fine-mode) AOD. We present a simple (AOD-normalized) SM fraction versus FM fraction (SMF vs. FMF) linear equation that explains the well-recognized empirical result of SMF generally being greater than the FMF. The AERONET inversion (AERinv) products (combined inputs of spectral AOD and sky radiance) and the spectral deconvolution algorithm (SDA) products (input of AOD spectra) enable, respectively, an empirical SMF vs. FMF comparison at similar (columnar) remote sensing scales across a variety of aerosol types. SMF (AERinv-derived) vs. FMF (SDA-derived) behavior is primarily dependent on the relative truncated portion (ε c ) of the coarse-mode (CM) AOD associated with the cutoff portion of the CM PSD and, to a second order, the cutoff FM PSD and FM AOD (ε f ). The SMF vs. FMF equation largely explains the SMF vs. FMF behavior of the AERinv vs. SDA products as a function of PSD cutoff radius (“inflection point”) across an ensemble of AERONET sites and aerosol types (urban-industrial, biomass burning, dust, maritime and a mixed class of Arctic aerosols). The overarching dynamic was that the linear SMF vs. FMF relation pivots clockwise about the approximate (SMF, FMF) singularity of (1, 1) in a “linearly inverse” fashion (slope and intercept of approximately 1−ε c and ε c ) with increasing cutoff radius. SMF vs. FMF slopes and intercepts derived from AERinv and SDA retrievals confirmed the general domination of ε c over ε f in controlling that dynamic. A more general conclusion is the apparent confirmation that the optical impact of truncating modal (whole) PSD features can be detected by an SMF vs. FMF analysis.

Norman T. O'Neill↗
NASA NTRS2019

PSR J0030+0451 Mass and Radius from NICER Data and Implications for the Properties of Neutron Star Matter

Neutron stars are not only of astrophysical interest, but are also of great interest to nuclear physicists because their attributes can be used to determine the properties of the dense matter in their cores. One of the most informative approaches for determining the equation of state (EoS) of this dense matter is to measure both a star’s equatorial circumferential radius Re and its gravitational mass M. Here we report estimates of the mass and radius of the isolated 205.53 Hz millisecond pulsar PSRJ0030+0451 obtained using a Bayesian inference approach to analyze its energy-dependent thermal X-ray waveform, which was observed using the Neutron Star Interior Composition Explorer (NICER). This approach is thought to be less subject to systematic errors than other approaches for estimating neutron star radii. We explored a variety of emission patterns on the stellar surface. Our best-fit model has three oval, uniform-temperature emitting spots and provides an excellent description of the pulse waveform observed using NICER. The radius and mass estimates given by this model are Re = 13.02+1.24-1.06 km andM = 1.44+0.15-0.14 Mmoon (68%). The independent analysis reported in the companion paper by Riley et al. explores different emitting spot models, but finds spot shapes and locations and estimates of Re and M that are consistent with those found in this work. We show that our measurements of Re and M for PSRJ0030+0451 improve the astrophysical constraints on the EoS of cold, catalyzed matter above nuclear saturation density.

M C Miller↗
NASA NTRS1974

Experimental and analytical sonic nozzle discharge coefficients for Reynolds numbers up to 8,000,000

Sonic discharge coefficients are presented for two different geometry flow nozzles using nitrogen gas at high pressures where real-gas corrections are significant. Throat Reynolds number range extended up to 8,000,000. Experimentally obtained coefficients for a nozzle with a continuous and finite radius of curvature agreed with those obtained analytically to within 0.2 per cent. Experimental coefficients for a long-radius ASME nozzle agreed to within 0.25 per cent to an empirical equation representing the most probable subsonic discharge coefficient.

Szaniszlo, A. J.↗
NASA NTRS1984

Theoretical model of the solar corona during sunspot minimum. I - Quasi-static approximation

The model of the solar corona (1.5 to 5 solar radius) during sunspot minimum is constructed. It is suggested that pole-equator asymmetry is caused by the interaction between global azimuthal electric currents in the corona and potential magnetic fields originated below. The asymmetry between the two hemispheres, which can be due to the magnetic quadrupole, is considered in detail. It is shown that an additional quadrupole term in the magnetic field representation affects the position of polar coronal hole boundaries differently in the two hemispheres. As a result, the outflow from the two polar regions is found to be different.

Osherovich, V. A.↗
NASA NTRS1986

Theory of Ostwald ripening in a two-component system

When a two-component system is cooled below the minimum temperature for its stability, it separates into two or more immiscible phases. The initial nucleation produces grains (if solid) or droplets (if liquid) of one of the phases dispersed in the other. The dynamics by which these nuclei proceed toward equilibrium is called Ostwald ripening. The dynamics of growth of the droplets depends upon the following factors: (1) The solubility of the droplet depends upon its radius and the interfacial energy between it and the surrounding (continuous) phase. There is a critical radius determined by the supersaturation in the continuous phase. Droplets with radii smaller than critical dissolve, while droplets with radii larger grow. (2) The droplets concentrate one component and reject the other. The rate at which this occurs is assumed to be determined by the interdiffusion of the two components in the continuous phase. (3) The Ostwald ripening is constrained by conservation of mass; e.g., the amount of materials in the droplet phase plus the remaining supersaturation in the continuous phase must equal the supersaturation available at the start. (4) There is a distribution of droplet sizes associated with a mean droplet radius, which grows continuously with time. This distribution function satisfies a continuity equation, which is solved asymptotically by a similarity transformation method.

Baird, J. K.↗
NASA NTRS1987

Determination of the masses of elliptical galaxies and clusters of galaxies with AXAF

The procedures to be used in the determination of the mass and mass distribution of elliptical galaxies and clusters of galaxies, using spatially resolved X-ray spectra of galaxies and clusters of galaxies to be obtained by the imaging spectrometers on AXAF, are described. The procedures utilize the unique AXAF features of large band width, large field of view, high angular resolution, long exposure times, and the availability of sophisticated AXAF instrumentation. The techniques described involve the measurement of the surface brightness and temperature profiles of the hot gas trapped in the potential wells of these systems. Then, by using the equation of hydrostatic equilibrium, which relates the total mass inside a given radius to the size, absolute temperature, density gradient, and temperature profile, it will be possible to infer the mass distribution in these objects to large physical scales.

Mushotzky, Richard F.↗
NASA NTRS1990

Observation and theory of Pc 5 waves with harmonically related transverse and compressional components

The properties of 23 magnetic pulsation events observed by the AMPTE CCE spacecraft are studied. These events are selected on the basis of the field magnitude which oscillated at the second harmonic of a simultaneously present transverse oscillation. The events have a second harmonic period of 80-600 s (roughly the Pc 5 range), are observed in cluster in the dawn (0300-0800 magnetic local time, MLT) and dusk (1600-2100 MLT) sectors, and are localized near the magnetic equator. Although the azimuthal wave number estimated from an ion finite Larmor radius effect, is generally large (about 50), there is a marked difference between the events observed in the dawn and dusk sectors. In the dawn sector the waves have low frequencies (1-5 mHz), indicate left-hand polarization with respect to the ambient magnetic field, and propagate eastward with respect to the spacecraft. In the dusk sector the waves have high frequencies (5-15 mHz), indicate right-hand polarization, and propagate westward. It is suggested that the waves are all westward propagating in the plasma rest frame and that local-time-dependent Doppler shift is the reason for the local time dependence of the wave properties.

Takahashi, K.↗
NASA NTRS1947

Critical stress of thin-walled cylinders in axial compression

Empirical design curves are presented for the critical stress of thin-walled cylinders loaded in axial compression. These curves are plotted in terms of nondimensional parameters of small-deflection theory and are compared with theoretical curves derived for the buckling of cylinders with simply supported and clamped edges. An empirical equation is given for the buckling of cylinders having a length-radius ratio greater than about 0.75. The test data obtained from various sources follow the general trend of the theoretical curve for cylinders with clamped edges, agreeing closely with the theory in the case of short cylinders, but falling considerably below the theoretical results for long cylinders. The discrepancy in the case of long cylinders increases with increasing values of the ratio of radius to wall thickness. Plotting curves for different values of this ratio reduces the scatter in the test data and a certain degree of correlation with theory is achieved. Advantage is taken of this correlation to obtain estimated design curves for cylinders with simply supported edges, for which little experimental information is available. (author)

Batdorf, S B↗
NASA NTRS1947

Critical stress of thin-walled cylinders in axial compression

Empirical design curves are presented for the critical stress of thin-wall cylinders loaded in axial compression. These curves are plotted in terms of the nondimensional parameters of small-deflection theory and are compared with theoretical curves derived for the buckling of cylinders with simply supported and clamped edges. An empirical equation is given for the buckling of cylinders having a length-radius ratio greater than about 0.75.

Batdorf, S B↗
NASA NTRS1992

Frozen orbits in the J2 + J3 problem

An analytical derivation of frozen orbit eccentricities and their location over the range of possible orbital inclinations in the J2 + J3 problem is presented. A gravitational field with only J2 and J3 terms is considered, because the equation defining frozen orbits in this field is an algebraic equation of the third order and an analytical formula for roots of this equation exists. An equation for the frozen orbit eccentricity is derived in a convenient form using only two independent parameters: the inclination and a parameter which is the product of the ratio of the radius of the central body to the orbital semimajor axis and the ratio of the J2 and J3 coefficients. The equation is solved, and, on the basis of its roots, frozen orbits in the J2 + J3 problem are classified.

Kiedron, Krystyna↗
NASA NTRS1994

Thin shell formation in radiative shocks. 1: Supernova remnants in low-density media

This paper explores the onset of thin-shell formation in interstellar shocks associated with supernova explosions. We outline a simple but useful scheme that indicates the time at which thin shell formation begins for supernova remnants (SNRs) evolving in a range of interstellar environments, extending the previous analytical models to arbitrary power-law density media. The result depends on the gas cooling properties and the shock velocity and radius. This is then applied to the specific case of SNRs in low-density media. The procedure for defining the time for the onset of shell formation, t(sub sf), equates the value of the adiabat, kappa = p/rho(exp gamma), to zero using the known time dependence of the shock radius and velocity. For the case of a power-law density ambient medium of the form rho(r) = Br(exp -omega), it is found that shell formation can be prevented when the ambient density drops faster than a critical rate. For a cooling function of the form Lambda = Lambda(sub 0) tau(exp beta), with beta = -0.5 (appropriate for line cooling), shell formation never occurs for omega greater than or equal to 9/5. The shell formation time is then computed for spherical shocks in a power-law density medium. For omega = 0, the onset of shell formation is found to be at t(sub sf) approx. equal to 2.87 x 10(exp 4) E51(exp 3/14) n(sub 0 exp -4.7) yr, which agrees well with previous estimates derived by other means. We compare the analytical shell formation time with the results of detailed numerical models for omega = 0 and three different ambient densities and find good agreement. The extension of the criterion for the onset of thin shell formation using the ratio of cooling to swept-up column density is also described. This method provides a useful approximation for cases when the exact solution is not known.

Franco, Jose↗
NASA NTRS1976

Impact ejecta on the moon

The response of a lunar-sized object to the impact of meteoroids no more than about 100 km in radius is studied by means of a numerical model. The partitioning of impact energy into the kinetic and internal energy of the ejecta is obtained by using the conservation of mass, momentum, and energy conservation equations in finite-difference form within an Eulerian framework with approximate equations of state. The calculations are performed for a 15 km/sec impact of an iron object 5 cm in radius on a gabbroic anorthosite surface. Ejecta ballistic analysis is then performed. Most of the material lost escaping the moon is lunar crust material. Only 0.2% of the meteoroid escapes, all in the vapor phase.

Okeefe, J. D.↗
NASA NTRS1977

Optimum constrained image restoration filters

The research described centered on development of an optimum image restoration filter (IRF) minimizing the radius of gyration of the corrected or composite system point-spread function (P-SF) subject to contraints, and reducing 2-dimensional spatial smearing or blurring of an image. The constraints are imposed on the radius of gyration of the IRF P-SF, the total restored image noise power, and the shape of the composite system frequency spectrum. The image degradation corresponds to mapping many points from the original image into a single resolution element. The P-SF is obtained as solution to a set of simultaneous differential equations obeying nonlinear integral constraints. Truncation errors due to edge effects are controlled by constraining the radius of gyration of the IRF P-SF. An iterative technique suppresses sidelobes of the composite system P-SF.

Riemer, T. E.↗
NASA NTRS1991

Vortex ring bubbles

Toroidal bubbles with circulation are studied numerically and by means of a physically motivated model equation. Two series of computations are performed by a boundary-integral method. One set shows the starting motion of an initially spherical bubble as a gravitationally driven liquid jet penetrates through the bubble from below causing a toroidal geometry to develop. The jet becomes broader as surface tension increases and fails to penetrate if surface tension is too large. The dimensionless circulation that develops is not very dependent on the surface tension. The second series of computations starts from a toroidal geometry, with circulation determined from the earlier series, and follows the motion of the rising and spreading vortex ring. Some modifications to the boundary-integral formulation were devised to handle the multiply connected geometry. The computations uncovered some unexpected rapid oscillations of the ring radius. These oscillations and the spreading of the ring are explained by the model equation which provides a more general description of vortex ring bubbles than previously available.

Lundgren, T. S.↗
NASA NTRS1981

The earth's radius and the G variation

It has long been assumed that if the gravitational constant G was larger in the past, the earth's radius had to be smaller. The assertion holds provided the input from microphysics (in particular the equation of state) is independent of G. While this is true for some theories of gravity with variable G it is not so in the scale covariant theory, where the pressure can be affected by a variable G in a way that, for a constant mass of the earth, a larger G in the past implies a larger earth's radius. Comparison with recent palaeomagnetic data is presented.

Canuto, V. M.↗
NASA NTRS1984

The dissolution or growth of a sphere

The problem of the dissolution or growth of an isolated stationary sphere in a large fluid body is analyzed. The motion of the boundary as well as the the resulting motion in the liquid are properly taken into account. The governing equations are solved using a recently developed technique (Subramanian and Weinberg, 1981) which employs an asymptotic expansion in time. Results for the radius of the sphere as a function of time are calculated. The range of utility of the present solution is established by comparison with a numerical solution of the governing equations obtained by the method of finite differences.

Shankar, N.↗
NASA NTRS1976

A theory for creep crack growth

The paper derives an analytical expression for creep crack growth rate based on a model in which the higher and concentrated stresses ahead of the crack tip enhance creep deformation, thus progressively causing stress rupture and continuous crack advance. The equation derived for creep crack growth rate is expressed in terms of a geometrical factor in the stress intensity expression and in terms of the crack tip radius whose lower limit estimate is the fracture mechanics crack-tip opening displacement. The functional features of the derived creep crack growth rate equation can be compared with those of a pertinent empirical equation. The analytical expression provides some guidelines for alloy and microstructure design.

Purushothaman, S.↗