Search NASA⌕ Search

SEARCH · Search NASA

Results for “reprocessed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Spatial and Temporal Distribution of Cloud Properties Observed by MODIS: Preliminary Level-3 Results from the Collection 5 Reprocessing

The Moderate Resolution Imaging Spectroradiometer (MODIS) was developed by NASA and launched onboard the Terra spacecraft on December 18, 1999 and Aqua spacecraft on May 4, 2002. It achieved its final orbit and began Earth observations on February 24, 2000 for Terra and June 24, 2002 for Aqua. A comprehensive set of operational algorithms for the retrieval of cloud physical and optical properties (optical thickness, effective particle radius, water path, thermodynamic phase) have recently been updated and are being used in the new "Collection 5" processing stream being produced by the MODIS Adaptive Processing System (MODAPS) at NASA GSFC. All Terra and Aqua data are undergoing Collection 5 reprocessing with an expected completion date by the end of 2006. The archived products from these algorithms include 1 km pixel-level (Level-2) and global gridded Level-3 products. The cloud products have applications in climate change studies, climate modeling, numerical weather prediction, as well as fundamental atmospheric research. In this talk, we will summarize the available Level-3 cloud properties and their associated statistical data sets, and show preliminary Terra and Aqua results from the available Collection 5 reprocessing effort. Anticipated results include the latitudinal distribution of cloud optical and radiative properties for both liquid water and ice clouds, as well as joint histograms of cloud optical thickness and effective radius for selected geographical locations around the world.

King, Michael D.↗

On the Reprocessing and Reanalysis of Observations for Climate

The long observational record is critical to our understanding of the Earth s climate, but most observing systems were not developed with a climate objective in mind. As a result, tremendous efforts have gone into assessing and reprocessing the data records to improve their usefulness in climate studies. Many challenges remain, such as tracking the improvement of processing algorithms and limited spatial coverage. Reanalyses have fostered significant research, yet reliable global trends in many physical fields are not yet attainable, despite significant advances in data assimilation and numerical modeling. Communication of the strengths, limitations and uncertainties of reprocessed observations and reanalysis data, not only among the community of developers, but also with the extended research community, including the new generations of researchers and the decision makers is crucial for further advancement of the observational data records. WCRP provides the means to bridge the different motivating objectives on which national efforts focus.

Bosilovich, Michael G.↗

65 Years of Reprocessed GLDAS Version 2.0 Data and Their Exploration Using the NASA GES DISC Giovanni

GLDAS-2.0 data have been reprocessed with updated Princeton meteorological forcing data within the Land Information System (LIS) Version 7, and temporal coverage have been extended to 1948-2012.Global Land Data Assimilation System Version 2 (GLDAS-2) has two components: GLDAS-2.0: entirely forced with the Princeton meteorological forcing data GLDAS-2.1: forced with atmospheric analysis and observation-based data after 2001In order to create more climatologically consistent data sets, NASA GSFC's Hydrological Sciences Laboratory (HSL) has recently reprocessed the GLDAS-2.0, by using updated Princeton meteorological forcing data within the LIS Version 7.GLDAS-2.0 data and data services are provided at NASA GES DISC Hydrology Data and Information Services Center (HDISC), in collaboration with HSL.

data assimilation↗

Dome Degradation Characterization of Wide-Field-of-View Nonscanner Aboard ERBE and Its Reprocessing

Earth Radiation Budget Experiment (ERBE) wide-field-of-view (WFOV) nonscanners aboard ERBS and NOAA- 9/NOAA-10 provided broadband shortwave and longwave irradiances from 1985 to 1999. The previous analysis showed dome degradation in the shortwave nonscanner instruments. The correction was performed with a constant spectral (gray assumption) degradation. We suspect that the gray assumption affected daytime longwave irradiance and led to a day-minus-night longwave flux differences (little change in night time longwave) increase over time. Based on knowledge from the CERES process, we will reprocess entire ERBE nonscanner radiation dataset by characterizing shortwave dome transmissivity with spectral dependent degradation using the solar data observed by these instruments. Once spectral dependent degradation is derived, imager derived cloud fraction and the cloud phase as well as surface type over the FOV of nonscanner instruments will be used to model unfiltering coefficients. This poster primarily explains the reprocessing techniques and includes initial comparison of several months of data processed with existing and our recent methods.

Shrestha, Alok K.↗

On-Line Monitoring for Control and Safeguarding of Radiochemical Streams at Spent Fuel Reprocessing Plant

There is a renewed interest worldwide to promote the use of nuclear power and close the nuclear fuel cycle. The long term successful use of nuclear power is critically dependent upon adequate and safe processing and disposition of the spent nuclear fuel Liquid-liquid extraction is a separation technique commonly employed for the processing of the dissolved spent nuclear fuel. Our approach is based on prerequisite that real time monitoring of the solvent extraction flowsheets provides unique capability to quickly detect unwanted manipulations with fissile isotopes present in the radiochemical streams during reprocessing activities. The instrumentation used to monitor these processes must be robust, require little or no maintenance, and be able to withstand harsh environments such as high radiation fields and aggressive chemical matrices. In addition, the ability for continuous on-line monitoring allows for numerous benefits. Our team experimentally assessed the potential of Raman and vis-NIR spectrophotometric techniques for on-line real-time monitoring of the U(VI)/nitrate ion/nitric acid and Pu(IV)/Np(V)/Nd(III), respectively, in solutions relevant to spent fuel reprocessing. Both techniques demonstrated robust performance in the repetitive batch measurements of each analyte in a wide concentration range using simulant and commercial dissolved spent fuel solutions. Static spectroscopic measurements served as training sets for the multivariate data analysis to obtain partial least squares predictive models, which were validated using on-line centrifugal contactor extraction tests. The corresponding spectrometers used under the laboratory conditions are easily convertible to the process-friendly configurations allowing remote measurements under the flow conditions. A fiber optic Raman probe allows monitoring of the high concentration species encountered in both aqueous and organic phases within the PUREX suite of flowsheets, including metal oxide ions, such as uranyl, components of the organic solvent, inorganic oxo-anions, and water. The actinides and lanthanides are monitored remotely by UV-vis-NIR spectroscopy in aqueous and organic phases. This paper summarizes our methodology and shows results of specific examples.

Bryan, Samuel A↗

Novel Sorbent Development and Evaluation for the Capture of Krypton and Xenon from Nuclear Fuel Reprocessing Off-Gas Streams

The release of volatile radionuclides generated during Used Nuclear Fuel reprocessing in the US will most certainly need to be controlled to meet US regulatory emission limits. A US DOE sponsored Off-Gas Sigma Team has been tasked with a multi-lab collaborative research and development effort to investigate and evaluate emissions and immobilization control technologies for the volatile radioactive species generated from commercial Used Nuclear Fuel (UNF) Reprocessing. Physical Adsorption technology is a simpler and potential economical alternative to cryogenic distillation processes that can be used for the capture of krypton and xenon and has resulted in a novel composite sorbent development procedure using synthesized mordenite as the active material. Utilizing the sorbent development procedure, INL sigma team members have developed two composite sorbents that have been evaluated for krypton and xenon capacities at ambient and 191 K temperature using numerous test gas compositions. Adsorption isotherms have been generated to predict equilibration and maximum capacities enabling modeling to support process equipment scale-up.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Novel Sorbent Development and Evaluation for the Capture of Krypton and Xenon from Nuclear Fuel Reprocessing Off-Gas Streams

The release of volatile radionuclides generated during Used Nuclear Fuel reprocessing in the US will most certainly need to be controlled to meet US regulatory emission limits. A US DOE sponsored Off-Gas Sigma Team has been tasked with a multi-lab collaborative research and development effort to investigate and evaluate emissions and immobilization control technologies for the volatile radioactive species generated from commercial Used Nuclear Fuel (UNF) Reprocessing. Physical Adsorption technology is a simpler and potential economical alternative to cryogenic distillation processes that can be used for the capture of krypton and xenon and has resulted in a novel composite sorbent development procedure using synthesized mordenite as the active material. Utilizing the sorbent development procedure, INL sigma team members have developed two composite sorbents that have been evaluated for krypton and xenon capacities at ambient and 191 K temperature using numerous test gas compositions. Adsorption isotherms have been generated to predict equilibration and maximum capacities enabling modeling to support process equipment scale-up.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Separation of Xenon from Krypton in UNF Reprocessing Off-Gas

Reprocessing of used nuclear fuel (UNF) results emits several volatile radionuclides that must be removed from the bulk off gas prior to release in order to meet U.S. regulatory emission requirements. After other volatile radionuclides have been removed, krypton (Kr) remains, along with associated with xenon (Xe) in the gas stream. The half-life of Xe is short enough that by the time UNF is sufficiently cooled to be reprocessed Xe is no longer a radiological concern and it may be release to atmosphere or collected for other purposes. Kr, however, must be placed in long term storage. In order to ensure the smallest practical volume for long term storage, the Xe, which is nearly ten times the volume of Kr, must be separated from the Kr. Although cryogenic distillation has been used successfully for this purpose, high capital and operational cost, along with safety considerations, made development of gas adsorption processes for separation of Xe and Kr attractive. INL developed an engineered form sorbent consisting of silver mordenite in a polyacrylonitrile matrix (AgZ-PAN) capable of complete separation of Xe from Kr in a single pass, allowing Kr to be captured downstream with no detectable Xe present.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Multiscale Evaluation of Acetohydroxamic Acid (AHA) Radiolysis Under Used Nuclear Fuel Reprocessing Solvent System Conditions

Acetohydroxamic acid (AHA) has been proposed as an alternative agent for the selective separation of plutonium and neptunium from co-extracted uranium during the reprocessing of used nuclear fuel. However, the fundamental radiolytic behavior of this molecule under envisioned process conditions – i.e., acidic biphasic solvent systems – is not sufficiently understood to support process applications. Here we present a systematic irradiation study (steady-state gamma and time-resolved pulsed electron) into the radiolytic integrity of AHA and formation of degradation products in aqueous nitric acid (HNO3) solutions (0.2 M) in presence and absence of an organic phase, comprising current (tri-butyl phosphate - TBP) and future (N,N-di-(2-ethylhexyl)butyramide - DEHBA and di-2-ethylhexylisobutyramide - DEHiBA) reprocessing ligands dissolved in n-dodecane diluent. Experimental data are complimented by predictive multiscale model calculations for the elucidation of underpinning mechanisms.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Classic Nuclear Fuel Reprocessing Flowsheet

This is a flowsheet as well as a series of subsheets to be used for discussion on the standard design of a reprocessing plant. This flowsheet consists of four main sections: offgas handling, separations, solvent wash, and acid recycle. As well as having the main flowsheet, subsections have been broken off into their own sheets to provide for larger font and ease of printing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Recovery from loss of reductant feed to a U/Pu separation contactor, magnox reprocessing plant, Sellafield - 14217

Following a revealed sustained loss of reductant feed to the Primary Separation 4 (PS4) U/Pu separation contactor in the Magnox Reprocessing Plant in 2014 the solvent extraction cycles were safely shutdown. However, initial mass balance calculations indicated that over four times the typical mass of Pu could be present in PS4. Due to the loss of reductant feed, much of this Pu was expected to be in the solvent phase of Tributyl Phosphate and Odourless Kerosene (TBP/OK) where it would be difficult to observe with the neutron monitors located under PS4. Samples were taken of the solvent in PS4 which confirmed the presence of Pu in solvent; normally almost all of the Pu in PS4 is in the aqueous phase. The volume ratio of solvent to aqueous in the PS4 contactor is high. This meant that simply re-dosing PS4 with reductant could not be supported as a recovery option due to the potential to realise high Pu concentrations in the aqueous phase. This paper details the recovery options which were considered and the ultimate decision to recover PS4 using Gadolinium (Gd) poisoning and Gd-dosed reductant feeds. The recovery included: - The need to consider the impact of Gd poisoning on monitoring of the recovery with the PS4 neutron monitors; - Close support from criticality safety personnel on the plant at all times during the recovery; - Production of operator aids and short fit for purpose safety documentation to assist with the recovery. The recovery of PS4 proceeded safely and smoothly. There were no losses of Pu to raffinate streams despite the prolonged shutdown. The plant was then safely rundown to flush out residual Pu and Gd. (author)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Initial recovery of the magnox reprocessing plant following a loss of reductant feed in the solvent extraction process - 14429

A recent event in the Magnox Reprocessing Plant involved the loss of reductant feed to a contacting vessel and required the plant to be shutdown. The criticality team attended the site out-of-hours to facilitate the production of a recovery plan. This initial recovery plan involved manual dosing of the contactor with reductant but was heavily dependent upon initial information regarding the length of time the maloperation had been occurring. Key assumptions fundamental to maintaining criticality safety during the planned recovery were clearly highlighted in the assessment that was written to support the operation, which allowed informed decisions to be made regarding the adequacy of the plan, once further information emerged suggesting the fault had been ongoing for much longer than originally assumed and therefore the amount of Pu in the contactor was much higher than initially thought. (author)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Burnup credit for BWR UOX used fuels: criticality-safety sensitivity studies for reprocessing - 14609

Actinides Only Burnup Credit (BUC) has been successfully used for years for PWR UOX fuels at AREVA La Hague reprocessing plant. For BWR UOX fuel assemblies, the application of the methodology developed for PWR fuel is not straightforward. Indeed, BWR UOX fuel assemblies have specific and various design characteristics and progress can be made on our understanding of the impact of such characteristics on the rotary dissolver k{sub eff} value, taking into account various irradiation conditions. Moreover, the void fraction introduces a new variable, compared to PWR fuels. The purpose of this paper is to present, for a reference BWR UOX fuel assembly, the impact of design characteristics and irradiation conditions on the rotary dissolver k-effective. The impacts of each parameter are studied in an uncorrelated way and are defined according to burnup and void fraction. The design characteristics and irradiation conditions of the Fukushima-Daini benchmark are taken into account as reference values for all these parameters. A range of values is defined for each of these parameters in order to consider a large variety of design characteristics and irradiation conditions Depletion, with APOLLO2-A code, and criticality, with CRISTAL V1.2 package, calculations are successively performed to define impact of each parameter on dissolver reactivity. Then a ranking of these parameters according to their impact on the dissolver's reactivity is done. This ranking could be useful in a general BWR UOX burnup credit approach to cover a collection of BWR UOX fuel assemblies by a penalizing fuel assembly defined with a particular set of parameters. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DEVELOPMENT OF GLASS COMPOSITIONS TO IMMOBILIZE ALKALI, ALKALINE EARTH, LANTHANIDE AND TRANSITION METAL FISSION PRODUCTS FROM NUCLEAR FUEL REPROCESSING

The Advanced Fuel Cycle Initiative (AFCI) waste management strategy revolves around specific treatment of individual or groups of separated waste streams. A goal for the separations processes is to efficiently manage the waste to be dispositioned as high level radioactive waste. The Advanced Fuel Cycle Initiative (AFCI) baseline technology for immobilization of the lanthanide (Ln) and transition metal fission product (TM) wastes is vitrification into a borosilicate glass. A current interest is to evaluate the feasibility of vitrifying combined waste streams to most cost effectively immobilize the wastes resulting from aqueous fuel reprocessing. Studies showed that high waste loadings are achievable for the Ln only (Option 1) stream. Waste loadings in excess of 60 wt % (on a calcined oxide basis) were demonstrated via a lanthanide borosilicate (LaBS) glass. The resulting glasses had excellent relative durability as determined by the Product Consistency Test (PCT). For a combined Ln and TM waste stream glass (Option 2), noble metal solubility was found to limit waste loading. However, the measured PCT normalized elemental releases for this glass were at least an order of magnitude below that of Environmental Assessment (EA) glass. Current efforts to evaluate the feasibility of vitrifying combined Ln, TM, alkali (Cs is the primary radionuclide of concern) and alkaline earth (Sr is the primary radionuclide of concern) wastes (Option 3) have shown that these approaches are feasible. However, waste loading limitations with respect to heat load (Cs/Sr loading), molybdenum solubility and/or noble metal solubility will likely be realized and must be considered in determining the cost effectiveness of these approaches.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Adsorption of molecular iodine and alkyl iodides from spent-nuclear-fuel-reprocessing off-gas using reduced silver mordenite

Radioactive iodine is a hazardous byproduct of spent-nuclear-fuel reprocessing that must be removed from the off-gas stream before it can be discharged. Reduced silver mordenite (Ag 0 Z) is currently the baseline material for iodine capture in the U.S. Although the performance characteristics and capture mechanisms of I 2 and CH 3 I have been established, similar investigations into long-chain organic iodides have yet to be performed. In this study, thin beds of Ag 0 Z were loaded with I 2 , CH 3 I, C 4 H 9 I, and C 12 H 25 I (5 ppm to 50 ppm) carried in a dry air stream at 150°C. The maximum iodine capacity was 105 ± 5 mg I/g Ag 0 Z for all species. Saturated Ag 0 Z samples were characterized using scanning electron microscopy, X-ray fluorescence, X-ray photoelectron spectroscopy, diffuse reflectance UV–visible spectroscopy, pair distribution function analysis, and thermogravimetric analysis. Further, near-complete Ag utilization and similar physical/chemical properties were observed for all samples. Through a comparison with previous studies and an investigation of aged Ag 0 Z, we propose that iodine species react with Ag + at exchange sites, forming α-AgI within the mordenite channels, and with surface Ag 0 nanoparticles, yielding β-/γ-AgI. The available Ag sites in the interior (Ag + ) and exterior (Ag 0 ) of mordenite determine the adsorption capacity since α-AgI formation is limited by the total pore volume. Potential iodine uptake routes were summarized for aging and non-aging environments. A scalable predictive model was implemented for deep-bed iodine removal, and predictions were in good agreement with experimental data. Sensitivity analysis suggests that iodine uptake kinetics is governed by pore diffusion.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Proof of Concept Simulations of the Multi-Isotope Process Monitor: An Online, Nondestructive, Near-Real-Time Safeguards Monitor for Nuclear Fuel Reprocessing Facilities

The International Atomic Energy Agency (IAEA) will require the development of advanced technologies to effectively safeguard nuclear material at increasingly large-scale nuclear recycling facilities. Ideally, the envisioned technologies would be capable of nondestructive, near-real-time, autonomous process monitoring. This paper describes recent results from model simulations designed to test the Multi-Isotope Process (MIP) monitor, a novel approach to safeguarding reprocessing plants. The MIP monitor combines the detection of intrinsic gamma ray signatures emitted from process solutions with multivariate analysis to detect off-normal conditions in process streams nondestructively and in near-real-time. Three computer models including ORIGEN-ARP, AMUSE, and SYNTH were used in series to predict spent nuclear fuel composition, estimate element partitioning during separation, and simulate spectra from product and raffinate streams using a variety of gamma detectors, respectively. Simulations were generated for fuel with various irradiation histories and under a variety of plant operating conditions. Principal component analysis (PCA) was applied to the simulated gamma spectra to investigate pattern variations as a function of acid concentration, burnup, and cooling time. Hierarchical cluster analysis (HCA) and partial least squares (PLS) were also used in the analysis. The MIP monitor was found to be sensitive to induced variations of several operating parameters including distinguishing ±2.5% variation from normal process acid concentrations. The ability of PLS to predict burnup levels from simulated spectra was also demonstrated to be within 3.5% of measured values.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Proof of Concept Experiments of the Multi-Isotope Process Monitor: An Online, Nondestructive, Near Real-Time Monitor for Spent Nuclear Fuel Reprocessing Facilities

Operators, national regulatory agencies and the IAEA will require the development of advanced technologies to efficiently control and safeguard nuclear material at increasingly large-scale nuclear recycling facilities. Ideally, the envisioned technologies would be capable of non-destructive, near-real-time (NRT), autonomous process monitoring. This paper describes results from proof-of-principle experiments designed to test the Multi-Isotope Process (MIP) Monitor, a novel approach to safeguarding reprocessing facilities. The MIP Monitor combines the detection of intrinsic gamma ray signatures emitted from process solutions with multivariate analysis to detect off-normal conditions in process streams nondestructively and in NRT. Commercial spent nuclear fuel of various irradiation histories was dissolved and separated using a PUREX-based batch solvent extraction. Extractions were performed at various nitric acid concentrations to mimic both normal and off-normal industrial plant operating conditions. Principal Component Analysis (PCA) was applied to the simulated gamma spectra to investigate pattern variations as a function of acid concentration, burnup and cooling time. Partial Least Squares (PLS) regression was applied to attempt to quantify both the acid concentration and burnup of the dissolved spent fuel during the initial separation stage of recycle. The MIP Monitor demonstrated sensitivity to induced variations of acid concentration, including the distinction of {+-} 1.3 M variation from normal process conditions by way of PCA. Acid concentration was predicted using measurements from the organic extract and PLS resulting in predictions with <0.7 M relative error. Quantification of burnup levels from dissolved fuel spectra using PLS was demonstrated to be within 2.5% of previously measured values.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗