Search NASA⌕ Search

SEARCH · Search NASA

Results for “retention”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Effect of vibration on retention characteristics of screen acquisition systems

The design of surface tension propellant acquisition systems using fine-mesh screen must take into account all factors that influence the liquid pressure differentials within the system. One of those factors is spacecraft vibration. Analytical models to predict the effects of vibration have been developed. A test program to verify the analytical models and to allow a comparative evaluation of the parameters influencing the response to vibration was performed. Screen specimens were tested under conditions simulating the operation of an acquisition system, considering the effects of such parameters as screen orientation and configuration, screen support method, screen mesh, liquid flow and liquid properties. An analytical model, based on empirical coefficients, was most successful in predicting the effects of vibration.

Tegart, J. R.↗
NASA NTRS1980

Improved fiber retention by the use of fillers in graphite fiber/resin matrix composites

A variety of matrix fillers were tested for their ability to prevent loss of fiber from graphite fiber/PMR polyimide and graphite fiber/epoxy composites in a fire. The fillers tested included powders of boron, boron carbide lime glass, lead glass, and aluminum. Boron was the most effective and prevented any loss of graphite fiber during burning. Mechanical properties of composites containing boron filler were measured and compared to those of composites containing no filler.

Gluyas, R. E.↗
NASA NTRS1980

Improved fiber retention by the use of fillers in graphite fiber/resin matrix composites

A potential problem in the use of graphite fiber reinforced resin matrix composites is the dispersal of graphite fiber during accidental fires. Airborne electrically conductive fibers originating from burning composites could enter and cause shorting in electrical equipment located in surrounding areas. A variety of matrix fillers have been tested for their ability to prevent loss of fiber from graphite fiber/PMR polyimide and graphite fiber/epoxy composites in a fire. The fillers tested included powders of boron, boron carbide (B4C), lime glass, lead glass, and aluminum. Of these fillers, boron was the most effective and prevented any loss of graphite fiber during burning. Mechanical properties of composites containing boron filler were measured and compared to those of composite containing no filler.

Gluyas, R. E.↗
NASA NTRS1980

The retention of hot gas in elliptical galaxies

The X-ray emission is interpreted from the fast-moving elliptical galaxy M86 (Forman et al. 1979) as evidence for the accumulation of an extensive gaseous envelope. The gas within this envelope is relatively hot, yet has until now been confined to the galaxy by the thermal pressure of the outer atmosphere of the Virgo cluster. The ram pressure of the intracluster gas in the cluster core is now stripping this envelope away. It is suggested that significant quantities of hot gas may be found in many elliptical galaxies.

Fabian, A. C.↗
NASA NTRS1980

Graphite fiber surface treatment to improve char retention and increase fiber clumping

Composites containing carbon and graphite fibers can release fibers into the atmosphere during a fire. This release can potentially cause failure in some types of electrical equipment. Reduced fiber dispersion during and after combustion will reduce risks. Epoxidized char forming systems were synthesized which will react with commercially available surface treated carbon fiber. Fibers modified with these char formers retained adhesion in a specific epoxy matrix resin. Small scale combustion testing indicates that using these char former modified fibers in laminates will help to reduce the dispersement of fibers resulting from exposure to fire without sacrificing resin to fiber adhesion.

Paul, J. T., Jr.↗
NASA NTRS1981

Improving turbine engine compressor performance retention through airfoil coatings

In order to evaluate the potential effectiveness of coatings in limiting erosive damage to compressor airfoils, an effort was initiated to evaluate candidate coatings for substrate alloys typically used in commercial engine high compressor blades. Laboratory and rig erosion testing of plasma deposited and diffusion coatings described in this paper have shown the potential of a two to four fold improvement in erosion life. The selective application of these coatings to approximately the outer third of the airfoil avoids coating the fatigue critical region of the blade, thus providing erosion resistance potentially without compromising the fatigue strength of the blade. Both the plasma and the diffusion coatings also offer the advantage of low initial cost and a multi-source production base.

Friedrich, L. A.↗
NASA NTRS1981

Fillers for improved graphite fiber retention by polymer matrix composites

The results of a program designed to determine the extent to which elemental boron and boron containing fillers added to the matrix resin of graphite/epoxy composites prevent the release of graphite fibers when the composites are exposed to fire and impact conditions are described. The fillers evaluated were boron, boron carbide and aluminum boride. The conditions evaluated were laboratory simulations of those that could exist in the event of an aircraft crash and burn situation. The baseline (i.e., unfilled) laminates evaluated were prepared from commercially available graphite/epoxy. The baseline and filled laminates' mechanical properties, before and after isothermal and humidity aging, also were compared. It was found that a small amount of graphite fiber was released from the baseline graphite/epoxy laminates during the burn and impact conditions used in this program. However, the extent to which the fibers were released is not considered a severe enough problem to preclude the use of graphite reinforced composites in civil aircraft structure. It also was found that the addition of boron and boron containing fillers to the resin matrix eliminated this fiber release. Mechanical properties of laminates containing the boron and boron containing fillers were lower than those of the baseline laminates. These property degradations for two systems: boron (5 micron) at 2.5 percent filler loading, and boron (5 micron) at 5.0 percent filler loading do not appear severe enough to preclude their use in structural composite applications.

House, E. E.↗
NASA NTRS1980

Surface temperatures and retention of H2O frost on Ganymede and Callisto

Surface temperatures and ice evaporation rates are calculated for Ganymede and Callisto as functions of latitude, time of day, and albedo, according to a model that uses surface thermal properties determined by eclipse radiometry and albedos determined from photometrically decalibrated Voyager images. The difference in temperature between Ganymede and Callisto is not great enough to account for the lack of bright polar caps on Callisto, which seems instead to reflect a real deficiency in the amount of available water frost relative to Ganymede. The temperature difference between Ganymede's grooved and cratered terrains also cannot account for the high concentration of bright ray craters in the former, suggesting that an internal geologic process has enriched the grooved terrain in ice content relative to the cratered terrain.

Squyres, S. W.↗
NASA NTRS1982

A 50 AH nickel cadmium battery activation and charge retention parametric study for LANDSAT-D

An alternate nickel-cadmium cell activation scheme was developed which significantly reduces battery dissipation while maintaining the cell active material in the proper electrochemical state. The new procedure of charging at C/20 for 8 hours, C/10 for 6 hours and followed by C/5 to a voltage limit of 1.430 volt/cell significantly reduces the heat dissipation and charge period when compared to the standard activation practice of charging at C/20 for 48 hours. In addition, subsequent discharge voltage profiles using the new scheme are higher when compared to the standard practice. The effects of extended open-circuit periods on nickel-cadmium cell results in a capacity loss of approximately 0.7 percent and 1.4 percent per day at 23 and 35 degrees Celsius, respectively.

Tasevoli, M.↗
NASA NTRS1980

Proportional retention of I and radiogenic Xe-129 in preheated Allende

In order to study the effects of heat loss and redistribution of iodine and xenon on the I-Xe age, the iodine-xenon dating technique was applied to a bulk sample of the Allende chondrite and a similar sample preheated to 900 C prior to the irradiation. Little iodine or Xe-129 were lost from the high-temperature fractions of the preheated sample, and the high-temperature isochron was fully preserved. The amounts of I and radiogenic Xe-129 retained by the preheated sample were nearly proportional in those temperature fractions (900-1150 C) where most I and radiogenic X-129 were lost. However, the intermediate-temperature isochron was modified, resulting in an apparent isochron which would predate the high-temperature isochron by 6.7 + or - 1.1 m.y.

Rison, W.↗
NASA NTRS1984

Retention Mechanism for Spinning Objects

Mechanism enables controlled release of two rotating objects. Mechanism applicable to some kinds of motor starters, drive shafts, or other drive systems released while rotating.

Cloyd, R. A.↗
NASA NTRS1987

Chemical studies of H chondrites. I - Mobile trace elements and gas retention ages

Trends for 16 trace elements (Ag, As, Au, Bi, Cd, Co, Cs, Ga, In, K, Rb, Sb, Se, Te, Tl, and Zn), chosen to span a broad geochemical and thermal response range, in 44 H4-6 chondrites, differ widely from those in L4-6 chondrites. In particular, H chondrites classified as heavily shocked petrologically do not necessarily exhibit Ar-40 loss and vice versa. The clear-cut causal relationship between siderophile and mobile element loss with increasing late shock seen in L chondrites is not generally evident in the H group. H chondrite parent material experienced an early high temperature genetic episode that mobilized a substantial proportion of these trace elements so that later thermal episodes resulted in more subtle, collateral fractionations. Mildly shocked L chondrites escaped this early high temperature event, indicating that the two most numerous meteorite groups differ fundamentally in genetic history.

Lingner, David W.↗
NASA NTRS1988

Power law rheology of ice and the relaxation style and retention of craters on Ganymede

A numerical finite element model of viscous relaxation of craters in ice is presented which incorporates rheological data for ice at temperatures and pressures appropriated to the near-surface regions of Ganymede. For temperature gradients in reasonable agreement with those obtained from thermal and structural models of Ganymede, relaxation times greater than 10 to the 7th years were obtained for craters with diameters less than 100 km. For all craters with diameters greater than 10 km, the dependence of viscosity on stress was found to significantly shorten the relaxation time. The rheological laws which dominate crater relaxation are discussed for craters of various sizes. The results are compared with imagery from Voyager.

Thomas, Paul J.↗
NASA NTRS1991

Retention of sodium during chondrule melting

Using published data, the differences in Na concentrations in different groups of porphyritic olivine chondrules are analyzed. The results show that Na was incorporated into type II chondrule precursors as albite and was not significantly lost during melting. Type I chondrules, which contain very low concentrations of Na, were also not depleted in Na during melting, as indicated by the lack of correlation between the Na/Al ratios and the liquidus temperatures in type I chondrules. It is concluded that the difference in Na concentration is caused by the abundance of precursor albite in type II chondrules, rather than the loss of Na from the melt.

Hewins, Roger H.↗
NASA NTRS1992

Capacity retention in hydrogen storage alloys

Results of our examination of the properties of several candidate materials for hydrogen storage electrodes and their relation to the decrease in H-storage capacity upon open-circuit storage over time are reported. In some of the alloy samples examined to date, only about 10 percent of the hydrogen capacity was lost upon storage for 20 days, while in others, this number was as high as 30 percent for the same period of time. This loss in capacity is attributed to two separate mechanisms: (1) hydrogen desorbed from the electrode due to pressure differences between the cell and the electrode sample; and (2) chemical and/or electrochemical degradation of the alloy electrode upon exposure to the cell environment. The former process is a direct consequence of the equilibrium dissociation pressure of the hydride alloy phase and the partial pressure of hydrogen in the hydride phase in equilibrium with that in the electrolyte environment, while the latter is related to the stability of the alloy phase in the cell environment. Comparison of the equilibrium gas-phase dissociation pressures of these alloys indicate that reversible loss of hydrogen capacity is higher in alloys with P(eqm) greater than 1 atm than in those with P(eqm) less than 1 atm.

Anani, A.↗
NASA NTRS1970

Nasa Records Disposition Handbook: Procedures Governing the Retention, Retirement, and Destruction of Agency Records

This handbook sets forth the disposition of official records of the National Aeronautics and Space Administration. Its provisions are applicable to NASA Headquarters and all field installations. This revised edition has been enlarged in scope and re-titled to provide guidance in all aspects of records retirements, transfers, destruction, and retrievals from Federal Records Centers. New records control schedules have been added and others revised. Also included are procedures for making recommendations for improved coverage of records categories by additions or revisions. The NASA Records Control Schedules are issued under authority of the NASA Records Management Officer in accordance with Section 101-11.406, Federal Property Management Regulations. They were approved for NASA use by the National Archives and Records Service, the General Accounting Office, and by the Joint Committee on the Disposition of Executive Papers, U.S. Congress.

Source record↗
NASA NTRS1997

Recruitment and Retention of Indians in Science and Engineering (RISE)

Fifteen students from Turtle Mountain Community College were selected to participate in activities of the RISE project last summer. Eight students successfully completed project activities and received stipends for their participation. These eight students are (1) Jamie Gable, (2) John Morin, (3) Patrick Belgarde, (4) Jason Laducer, (5) Alex Johnson, (6) Eric Houle, (7) Gary Renault, and (8) Kenny DeCoteau. In the fall of 1998, Jamie Gable and Gary Renault went to North Dakota State University to pursue their undergraduate degrees in mechanical engineering, and John Morin and Alex Johnson joined the University of North Dakota's electrical engineering and industrial technology programs, respectively. Remaining four students will continue to participate in the RISE activities this year and transfer to the universities next year. Seven students who failed to complete the RISE project activities during the current award period are encouraged to participate again this fall. The RISE students were enrolled in a special course called "Introduction to Engineering Materials." The project director, Dr. Kamawat, taught the course on Saturdays and Sundays. Theoretical and mathematical background on engineering materials and careers in various engineering professions were discussed in this course. The students attended guest lectures given by engineers and professors and visited local industries. In addition, the students went to North Dakota State University (NDSU) at Fargo, ND, and the University of Minnesota (UMN) at Minneapolis, MN, to tour their engineering departments. At NDSU, they conducted laboratory tests on various engineering materials, such as concrete, steel, wood, plastics, and carbon composites. The students investigated the mechanical behavior of these materials under various loading conditions, collected data, interpreted data, identified possible errors, determined the mechanical properties, and wrote reports on their findings. The students created posters describing their results on the behavior of engineering material. The posters were displayed in the TMCC's student lounge.

Karnawat, Sunil↗