Search NASA⌕ Search

SEARCH · Search NASA

Results for “rigid structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Composite foam structures

A composite rigid foam structure that has a skin or coating on at least one of its surfaces. The skin is formed in situ by thermal spray techniques. The skin is bonded substantially throughout the surface of the porous substrate to the peripheries of the pores. The skin on the average does not penetrate the surface of the substrate by more than the depth of about 2 to 5 pores. Thus, thermal spraying the skin onto the rigid foam produces a composite that is tightly and uniformly bonded together without unduly increasing the weight of the composite structure. Both thermal conductivity and bonding are excellent.

Williams, Brian E.↗
NASA NTRS1982

Rigid collapsible dish structure

A collapsible dish structure composed of a plurality of rows of rigid radial petal assemblies concentric with the axis of the dish. The petal assemblies consist of a center petal and two side petals, the center petal hinged on an axis tangent to a circle concentric with the axis of the dish and the side petals hinged to the center petal at their mating edge. The center petal is foldable inwardly and the side petals rotate about their hinges such that the collapsed dish structure occupies a much smaller volume than the deployed dish. Means of controlling the shape of the dish to compensate for differential expansion of the deployed dish are also provided.

Palmer, William B.↗
NASA NTRS1997

Thermally-Induced Structural Disturbances of Rigid Panel Solar Arrays

The performance of a significant number of spacecraft has been impacted negatively by attitude disturbances resulting from thermally-induced motions of flexible structures. Recent examples of spacecraft affected by these disturbances include the Hubble Space Telescope (HST) and the Upper Atmosphere Research Satellite (UARS). Thermally-induced structural disturbances occur as the result of rapid changes in thermal loading typically initiated as a satellite exits or enters the Earth's shadow. Temperature differences in flexible appendages give rise to structural deformations, which in turn result in disturbance torques reacting back on the spacecraft. Structures which have proven susceptible to these disturbances include deployable booms and solar arrays. This paper investigates disturbances resulting from thermally-induced deformations of rigid panel solar arrays. An analytical model for the thermal-structural response of the solar array and the corresponding disturbance torque are presented. The effect of these disturbances on the attitude dynamics of a simple spacecraft is then investigated using a coupled system of governing equations which includes the effects of thermally-induced deformations. Numerical results demonstrate the effect of varying solar array geometry on the dynamic response of the system.

Johnston, John D.↗
NASA NTRS2022

Finite Element Modeling of Rigid-Flex PCB Robotic Structures for Dynamic Environments

Rigid-flex circuit boards are becoming moreprevalent as the limits are pushed on the size, mass, and geometryof electronic systems. A key aspect of designing a rigid-flexprinted circuit boards (PCB) system is an assessment of thedynamic properties of the PCB and predicting system perfor-mance under dynamic loading. Among current modeling method-ologies for rigid-flex PCB, a simplified modeling methodology thatadequately captures the system dynamics does not exist. This arti-cle presents a novel, computationally efficient approach formodeling rigid-flex PCB systems and the calibration of the mate-rial models via modal testing. The resulting simplified model isable to capture system frequencies, mode shapes, and representa-tive force-displacement behavior. The proposed methodology isused to model NASA Jet Propulsion Laboratory’s Pop-Up FlatFolding Explorer Robot (PUFFER) and assess the sensitivity of asystem model to input parameters.

John Bell↗
DOE OSTI2024

Synthesis and Structural Investigation of Rigid Naphthyridine-Bis(carbene) for Trigonal Planar Coordination of Coinage Metals

Coinage metal complexes, particularly Cu(I) and Au(I), supported by N-heterocyclic carbenes are of broad interest in organometallic synthesis, catalysis, and luminescent materials. The d 10 coinage metals can adopt varied linear, trigonal planar, and tetrahedral geometries. However, two-coordinate, linear Cu(I) and Au(I) complexes supported by sterically demanding monodentate or chelating carbenes are generally observed. In most cases, chelating ligands generate multinuclear species with linear geometries at the corresponding Cu(I) centers rather than mononuclear complexes. In this report, we synthesized two bis(carbene) ligands anchored by a flexible bipyridine and a rigid naphthyridine backbone with tunable proximal and distal steric properties at the wingtips to examine the influence of backbone rigidity and directionality of carbene donors on the formation of trigonal planar coinage metal species. Here, the bipyridine-bis(carbene) (ImPy) 2 ligand exclusively stabilizes dinuclear chloride complexes of Cu(I) and Ag(I), whereas the naphthyridine-bis(carbene) (NBC) stabilizes mononuclear, trigonal planar chloride complexes of Cu(I) and Ag(I) and a dinuclear chloride Au(I) complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2004

Hybrid Inflatable Pressure Vessel

Figure 1 shows a prototype of a large pressure vessel under development for eventual use as a habitable module for long spaceflight (e.g., for transporting humans to Mars). The vessel is a hybrid that comprises an inflatable shell attached to a rigid central structural core. The inflatable shell is, itself, a hybrid that comprises (1) a pressure bladder restrained against expansion by (2) a web of straps made from high-strength polymeric fabrics. On Earth, pressure vessels like this could be used, for example, as portable habitats that could be set up quickly in remote locations, portable hyperbaric chambers for treatment of decompression sickness, or flotation devices for offshore platforms. In addition, some aspects of the design of the fabric straps could be adapted to such other items as lifting straps, parachute straps, and automotive safety belts. Figure 2 depicts selected aspects of the design of a vessel of this type with a toroidal configuration. The bladder serves as an impermeable layer to keep air within the pressure vessel and, for this purpose, is sealed to the central structural core. The web includes longitudinal and circumferential straps. To help maintain the proper shape upon inflation after storage, longitudinal and circumferential straps are indexed together at several of their intersections. Because the web is not required to provide a pressure seal and the bladder is not required to sustain structural loads, the bladder and the web can be optimized for their respective functions. Thus, the bladder can be sealed directly to the rigid core without having to include the web in the seal substructure, and the web can be designed for strength. The ends of the longitudinal straps are attached to the ends of the rigid structural core by means of clevises. Each clevis pin is surrounded by a roller, around which a longitudinal strap is wrapped to form a lap seam with itself. The roller is of a large diameter chosen to reduce bending of the fibers in the strap. The roller also serves to equalize the load in the portions of the strap on both sides of the clevis pin. The lap seam is formed near the clevis by use of a tapered diamond stitch: This stitch is designed specifically to allow fibers in the stitch and strap to relax under load in such a manner that the load becomes more nearly evenly distributed among all fibers in the stitch region. Thus, the tapered diamond stitch prevents load concentrations that could cause premature failure of the strap and thereby increases the strength of the strap/structural-core joint. The lap seam can be rated at >90 percent of the strength of the strap material.

Raboin, Jasen↗
NASA NTRS1998

On the Propagation of Small Perturbations in Two Simple Aeroelastic Systems

In this paper we investigate the wave propagation patterns for two simple flow-structure problems. We focus on the study of the propagation speeds of the waves in the fluid and in the structure, as the rigidity of the structure and the Mach number of the undisturbed flow are changing. Some implications concerning the sound emission by inhomogeneities eventually present in the structure are discussed.

Iollo, Angelo↗
NASA NTRS1990

Using a fast Fourier method to model sound propagation in a stratified atmosphere over a stratified porous-elastic ground

Using a Fast Fourier integration method and a global matrix method for solution of the boundary condition equations at all interfaces simultaneously, a useful tool for predicting acoustic propagation in a stratified fluid over a stratified porous-elastic solid was developed. The model for the solid is a modified Biot-Stoll model incorporating four parameters describing the pore structure corresponding to the Rayleigh-Attenborough rigid-porous structure model. The method is also compared to another Fast Fourier code (CERL-FFP) which models the ground as an impedance surface under a horizontally stratified air. Agreement with the CERL FFP is good. The effects on sound propagation of a combination of ground elasticity, complex ground structure, and atmospheric conditions are demonstrated by theoretical results over a snow layer, and experimental results over a model ground surface.

Tooms, S.↗
NASA NTRS2004

Potential bio-medical and commercial applications of cold hibernated elastic memory (CHEM) self-deployable foam structures

A cold hibernated elastic memory (CHEM) foam structure is one of the most recent results of the quest for simple, reliable and low-cost expandable space structures. The CHEM technology utilizes shape memory polymers in open cellular (foam) structure or sandwich structures made of shape memory polymer foam cores and polymeric composite skins. It takes advantage of the polymer’s heat activated shape memory in addition to the foam’s elastic recovery to deploy a compacted structure. The glass transition temperature, Tg is tailored to rigidize the structure in the fully deployed configuration.

Sokolowski, Witold↗
NASA NTRS1983

Docking of a rigid spacecraft with unrestrained orbiting flexible structure

A methodology for producing simulations of the docking of a rigid spacecraft with any unrestrained flexible structure was studied. A detailed algorithm for the simulation of the docking of a rigid body with a nonuniform unrestrained beam was sought. The values acquired during docking by the variables characterizing the motions of the rigid body and the unrestrained beam were sought.

Kane, T. R.↗
NASA NTRS1985

Making Structural Members From Wire

Structural members of any size, consisting of wire gridwork, fabricated onsite. Rigid beam or column formed from intersecting helices and straight members of relatively flexible wire. Wires joined at their intersections: short wire sections between joints therefore approximate sides of rigid triangular structural subunits. Although originally intended for manufacturing large structures in space, technique has potential for use on Earth.

Dunn, T. J.↗
NASA NTRS1991

Rigid lightweight optical bench for a spaceborne FUV spatial heterodyne interferometer

Requirements for spaceflight optical instruments usually dictate that for the structures be rigid, lightweight, and thermally stable. In addition, for interferometric far ultraviolet (FUV) spectrometers, the requirements for torsional deflection are more severe than with conventional spectrometers. To meet the challenge for rigid and lightweight optical instruments, this paper explores the design of a high-stiffness structure for the support of an FUV spatial heterodyne interferometer where the torsional deflection of the instrument is on the order of 10 arc seconds. The structure is based on use of a thin, hollow section beam with weight-relieving between optical elements. The design also uses a modular and self-contained positioning mechanism that is removed after final optical alignment. Several specific material properties are presented as criteria for material selection. The parameters which affect the particular design requirements are identified with respect to the desired material properties and physical design features. Although large thin sections are susceptible to thermal gradients, this could be minimized by a trade-off for weight, where adequate margin exists. This paper describes the preliminary design for the structure and presents an analysis to verify compliance with the requirements.

Tom, James L.↗
DOE OSTI2025

Lifshitz Transition and Band Structure Evolution in Alkali Metal Intercalated 1T′-MoTe 2

In van der Waals materials, coupling between adjacent layers is weak, and consequently interlayer interactions are weakly screened. This opens the possibility to profoundly modify the electronic structure, e.g., by applying electric fields or with adsorbates. Here, in this study, we show for the case of the topologically trivial semimetal 1T′-MoTe 2 that potassium dosing at room temperature significantly transforms its band structure. With a combination of angle-resolved photoemission spectroscopy, scanning tunneling microscopy, X-ray photoemission spectroscopy, and density functional theory we show that (i) for small concentrations of K, 1T′-MoTe 2 undergoes a Lifshitz transition with the electronic structure shifting rigidly, and (ii) for larger K concentrations 1T′-MoTe 2 undergoes significant band structure transformation. Our results demonstrate that the origin of this electronic structure change stems from alkali metal intercalation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1989

On the relationship between wind profiles and the STS ascent structural loads

The response of STS ascent structural load indicators to the wind profile is analyzed. The load indicator values versus Mach numbers are calculated with algorithms using trajectory information. The ascent load minimum margin concept is used to show that the detailed wind profile structure measured by the Jimsphere wind system is not needed to assess the STS rigid body structural wind loads.

Smith, Orvel E.↗