SEARCH · Search NASA

Results for “salt stress”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

DOE OSTI2020

An Integrated Multiscale Experimental-Numerical Analysis on Reconsolidation of Salt-Clay Mixture for Disposal of Heat-Generating Waste (Final NEUP Technical Report)

The overall purpose of this research is to improve understanding of THMC coupling effect on the reconsolidation of granular (or crushed) salt-clay mixture used for seal systems of shafts and drifts in salt repositories. This proposed work is partially motivated by the recent work on the Waste Isolation Pilot Plant (WIPP) that shows the promising sealing capability of clay-salt mixture compared to crushed salt. In particular, primary emphasis is to develop a fully integrated multiscale experiment-numerical study to determine and explain what leads to the superior sealing ability of the clay-salt mixture. These research activities are designed to seek further understanding of (1) why clay additives may enhance the fluid trapping and (2) whether this flow barrier effect may prevail under different combinations of temperature, confining pressure, deviatoric stress and other foreseeable environmental factors. If successful, this enhanced flow trapping ability of the seal provides significant improvement to the seal and repository performance and therefore make the repository safer in the long-term. The experiment component includes microstructural investigation and macroscopic tests on a reconsolidated salt-clay mixture. In the microstructural study, the goal is to (1) characterize microscopic distributions of distinct phases (e.g., clay, salt crystal boundaries, trapped brine, and pore) to examine the connectivity of the pore network inside the salt-clay mixture with different amounts of clay additive and moisture content and (2) analyze multiscale imaging data to reconstruct the polycrystalline microstructures for numerical simulations. Meanwhile, macroscopic tests are performed to analyze how clay alters the failure/creep mechanisms in the salt-clay mixture. Microscopic and macroscopic experimental observations will both be used to calibrate and validate a multiscale model that explicitly simulates the capillary and multiphase flow in the connected pores and the deformation due to the presence of intra-crystalline brine at the pore scale via a new polyhedral discrete element–lattice Boltzmann method (DEM-LBM) coupling model. The pore-scale simulations are homogenized via an upscaling procedure that converts pore-scale information (e.g. force exerted on grain boundary, sliding, pressure-solution) to continuum measures (e.g. Cauchy stress, Darcy’s flow) at each integration point in the macroscopic multiphase TMHC model. This multiscale scheme will allow coupling be- tween high-fidelity simulations of brine-salt-clay interaction and the macroscopic TMHC model. The multiscale model helps the understanding of how the trapped brine inclusion affects the pressure-solution mechanism with the presence of clay and moisture. This work brings new insight into the sealing capacity of salt-clay mixture under elevated temperature over a long period of time - a key to evaluating the potential of salt-clay mixture usage for salt repositories.

42 ENGINEERING↗

DOE OSTI2026

Understanding failure in austenitic steels: Key considerations for molten salt storage in CSP applications

Owing to their excellent properties, austenitic stainless steels are extensively used in boilers, furnaces, molten salt tanks, and other applications that are subjected to extreme mechanical loads and high-temperature conditions. Their high corrosion and creep resistance make them suitable for high-temperature operating environments. Additionally, good fatigue resistance and favorable mechanical and visual properties are essential. However, the premature failure of several components at elevated temperatures has been previously reported. Although the failure analysis of components in service is complex, processes such as cold work and welding have been identified as contributing factors to the performance degradation of these steels. This study aims to analyze the various documented failure modes and mechanisms in austenitic steels, including creep, cracking, stress relaxation cracking, and fatigue, to better understand the multi-objective design requirements for these alloys as structural materials for high-temperature molten salt tanks in Concentrating Solar Power (CSP) plants. Stabilized austenitic grades, such as AISI 347H, demonstrate superior resistance to creep and corrosion-related degradation when compared to non-stabilized grades like AISI 316L at temperatures relevant to concentrated solar power (CSP) applications. In contrast, nickel-based alloys offer enhanced corrosion resistance, albeit at a higher cost. This review underscores that creep, stress relaxation cracking, and thermo-mechanical fatigue are the predominant long-term failure risks in CSP hot tanks.

14 SOLAR ENERGY↗

DOE OSTI2020

Effects of Extended Aqueous Processing on Structure, Chemistry, and Performance of Polycrystalline LiNi x Mn y Co z O 2 Cathode Powders

The prospect of aqueous processing of LiNi x Mn y Co z O 2 (NMC) cathodes has significant appeal to battery manufacturers for the reduction in materials cost, toxicological risk, and environmental impact compared to conventional N -methyl-2-pyrrolidone (NMP)-based processing. However, the effects of aqueous processing of NMC powders at industrial timescales are not well studied, with prior studies mostly focusing on relatively brief water washing processes. Here, we investigate the bulk and surface impacts of extended aqueous processing of polycrystalline NMC powders with different compositions. We demonstrate that at timescales of several hours, polycrystalline NMC is susceptible to intergranular fracture, with the severity of fracture scaling with the NMC nickel content. While bulk crystallinity and composition are unchanged, surface sensitive techniques such as X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) indicate that the exposure of water leads to a level of delithiation, nickel reduction, and reconstruction from the layered to rock-salt structure at the surface of individual grains. Dynamic single NMC microparticle compression testing suggests that the resulting mechanical stresses weaken the integrity of the polycrystalline particle and increases susceptibility of intergranular fracture. The initially degraded surfaces along with the increased surface area lead to faster capacity fade and impedance growth during electrochemical cycling. From this work, it is demonstrated that NMC powders require surface or grain boundary modifications to make industrial-scale aqueous cathode processing viable, especially for next-generation nickel-rich NMC chemistries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Core-flood Effluent and Shale Surface Chemistries in Predicting Interaction between Shale, Brine, and Reactive Fluid

We report field and laboratory observations to date indicate that the efficiency of hydraulic fracturing, as it relates to hydrocarbon recovery, depends significantly on geochemical alterations to rock surfaces that diminish accessibility by partial or total plugging of the pore and fracture networks. This is caused by mineral scale deposition such as coating of fracture surfaces with precipitates, particle migration, and/or crack closure due to dissolution under stress. In reactive flow-through experiments, mineral reactions in response to acidic fluid injection significantly reduced system porosity and core permeability. The present study focuses on changes to fluid chemistry and shale surfaces (inlet and fracture walls) resulting from shale-fluid interactions and integrating these findings for an improved estimate of transport-related consequences. The reacted shale surfaces were examined by spatially-resolved scanning electron microscopy - energy dispersive spectroscopy (SEM-EDS) analysis. Importantly, inductively coupled plasma - mass spectrometry/optical emission spectroscopy (ICP-MS/OES) was utilized to probe the chemical evolution of the core-flood effluents. The three study cores selected from the Marcellus formation represent different mineralogies and structural features. In flow-through experiments, lab-generated brine and HCl-based fracture fluid (pH=2) were injected sequentially under effective stress (up to 500 psi) at reservoir temperature (80°C). SEM-EDS results confirmed by the ICP concentration trends showed significant Fe hydroxide precipitates in clay- and pyrite-rich outcrop samples due to partial oxidation of Fe-bearing phases in the case of intrusion of low salinity water-based fluids. Porosity reduction in the MSEEL (Marcellus Shale Energy and Environmental Laboratory) carbonate-rich sample is related to compaction of cores under stress due to matrix softening with substantial dissolution, and pore-filling by hydroxides, as well as barite and salts. Despite the same fluid compositions and experimental conditions used for both MSEEL samples, barite precipitation was much more intense in the MSEEL clay-rich sample due to its greater sorption capacity and additional sulfate source as well as fissile nature with multiple lengthwise cracks. ICP tests revealed time-resolved concentration trends in produced brine and reactive fluids that in turn complemented the pre-/post-reaction SEM-EDS observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Identifying biomass yield potential of tetra, hexa, and octoploid prairie cordgrass populations grown on marginal lands

As the demand for renewable energy sources with reduced carbon emissions to the atmosphere increases, bioenergy crops remain an attractive alternative to fossil fuels. Another appeal of bioenergy crops is the potential utilization of marginal lands not suitable for food crops. Prairie cordgrass is a perennial warm season polyploid grass species being considered as a bioenergy crop that also exhibits a high tolerance for salinity and flooding. The ploidy level of prairie cordgrass has previously been suggested to correlate with agronomic traits. However, little is known about the agricultural performance of prairie cordgrass on marginal lands and if a correlation of ploidy level to stress tolerance exists. In this experiment, the productivity of tetraploids, hexaploids, and octoploids was investigated when grown on three different marginal sites including waterlogged, saline, and low-nutrient gravelly soils. Here we found that prairie cordgrass populations annually produced dry biomass on a wet marginal site comparable to normal cropland. However, the productivity was remarkedly decreased at both a salt-affected site and a limestone mine reclamation site. We were unable to conclude that different ploidy levels affected the biomass yield of prairie cordgrass grown under abiotic stress. However, there was a differential response of populations to various types of marginal sites. Finally, these results indicate potential genetic resources for developing breeding targets and identifying mechanisms of abiotic stress tolerance. Moreover, we highlight the need to generate diverse ploidy levels of prairie cordgrass in the same genetic backgrounds for future testing.

09 BIOMASS FUELS↗

DOE OSTI2025

Molten Salt Corrosion Tests of Additively Manufactured Stainless Steel 316H

Molten salt reactors (MSRs) have drawn considerable interest due to their favorable safety features, high thermal efficiency, and compatibility with different fuel cycles. Yet, the success of MSRs hinges critically on the performance of structural materials to be used in these aggressive molten salt environments, where corrosion and material compatibility remain primary challenges to long-term reliability. Additively manufactured (AM) nuclear structural materials prompt the use of novel geometries and compositions to enhance material performance and reduce costs of constructing MSRs. The rapid solidification conditions inherent to AM processing impart distinctive microstructural features, including cellular sub-structures, dislocation densities, residual stress, and oxide inclusions, which can influence material performance in MSR components. While the mechanical properties of AM stainless steels have been widely studied, their corrosion behavior, particularly in molten salt environments, has received far less attention. Addressing these needs, the Advanced Materials and Manufacturing Technologies (AMMT) program provides a framework for systematically evaluating how unique microstructures produced by AM processes influence the performance of these materials in these demanding environments and for developing reproducible testing workflows that can support future code qualification efforts and standards development. Bridging this knowledge gap is essential for assessing the viability of AM alloys in MSRs and informing qualification strategies. A further challenge is the absence of standardized protocols for molten salt corrosion testing. Accordingly, this report provides an account of the corrosion evaluation of AM 316H stainless steel in NaCl 2 -MgCl 2 molten salt at 550 °C, with exposure times of 100 and 500 hours. It documents the experimental procedures implemented under the AMMT program, including salt preparation, exposure protocols, and post-test characterization methods, to establish reproducibility and transparency. Importantly, the study examines AM 316H samples in the as-fabricated condition, directly reflecting the surface state most relevant to engineering applications, and compares their behavior to machine-cut surfaces. Overall, preliminary evaluations have noted that surface conditions (e.g. morphology, contamination, etc.) have a noticeable impact on the corrosion resiliency. The impact of the corrosion is difficult to detect at 100h, unless, in the case of AM 316H, the specimen surface is decontaminated. After 500 h, as-fabricated surfaces of AM and wrought 316H display evidence of general versus preferential corrosion attack, respectively. Both AM and wrought 316H machine-cut surfaces exhibit a continuous Cr depletion zone, evident of general corrosion. While the estimated extent of corrosion appears within the same order of magnitude regardless of the surface condition, it is apparent that more predictable behavior is observed on machine-cut surfaces. Nonetheless, further investigation is necessary to fully elucidate the corrosion mechanism under these conditions.

36 - MATERIALS SCIENCE↗

DOE OSTI2024

Ekman-driven salt transport as a key mechanism for open-ocean polynya formation at Maud Rise

Open-ocean polynyas formed over the Maud Rise, in the Weddell Sea, during the winters of 2016–2017. Such polynyas are rare events in the Southern Ocean and are associated with deep convection, affecting regional carbon and heat budgets. Using an ocean state estimate, we found that during 2017, early sea ice melting occurred in response to enhanced vertical mixing of heat, which was accompanied by mixing of salt. The melting sea ice compensated for the vertically mixed salt, resulting in a net buoyancy gain. An additional salt input was then necessary to destabilize the upper ocean. This came from a hitherto unexplored polynya-formation mechanism: an Ekman transport of salt across a jet girdling the northern flank of the Maud Rise. Such transport was driven by intensified eastward surface stresses during 2015–2018. Our results illustrate how highly localized interactions between wind, ocean flow and topography can trigger polynya formation in the open Southern Ocean.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

ALLOY SELECTION AND C-276 CODE DESIGN VALUE EXTENSION FOR ADVANCED MOLTEN SALT TECHNOLOGY TEST FACILITIES EXPERIMENTATION

Molten halide salts are being considered as working fluids for nuclear and concentrated solar power applications. High temperature molten fluoride and chloride salts are known to preferentially attack and deplete Cr in alloys, which leads to the use of high-Ni lower-Cr alloys in test facilities for advanced Molten Salt Technology. Alloys 600 and C-276 are two commercially available Ni alloys that have moderate Cr contents and are qualified to the maximum temperature of 649°C and 677°C (1,200°F and 1,251°F), respectively, in the Boiler and Pressure Vessel Code. Both alloys have good corrosion resistance to acids, are resistant to stress-corrosion cracking, and have long track records of use in the chemical industry. Comparatively, Alloy C-276 has a similar Cr content but much higher allowable stresses for temperatures greater than 600°C (1,112°F). Therefore, it has been considered as a structural material for test facilities that require operations at 700°C (1,292°F) or greater to develop high-temperature Molten Salt Technology. To meet the requirements, the current code design values were extended based on some experimental data. Analysis showed that above current Codified maximum temperature, strength of the alloy is mainly controlled by creep rupture life under the average stress, although the Sc creep rate criterion is close to the Favg.Savg rupture criterion. This paper presents the intended test facilities and the design requirements, alloy selection considerations, literature review, data analysis, and proposed allowable stress extension based on some creep test data for C-276 at temperatures greater than 677°C (1,251°F). Further research activities are also briefly mentioned.

Ren, Weiju↗

DOE OSTI2026

Pixel-Registered Multimodal Synchrotron XRF and FTIR Microscopies Reveal Salinity Stress Response Mechanisms in Pistachio

Background: Salinity is a major abiotic stress that negatively affects nearly all plant species at all stages of growth. Drought and poor-quality irrigation cause high soil salinity and salt accumulation via evaporation, reducing crop productivity. Despite its critical importance, the spatial localization of salt ions and associated biochemical changes within plants experiencing high salinity remains largely unknown. In this study, we developed a multimodal imaging pipeline to understand the impact of salinity on the pistachio rootstock UCB-1 (Pistacia atlantica x Pistacia integerrima). We directly link biochemical fingerprints in stem tissue architecture with salt ion localization to provide insights into the strategies pistachio uses to tolerate salinity. Results: We observed that Pistacia spp. exposed to high salt conditions accumulated Ca, Si, Cl, Al and Mg as hotspots within the pith, compared to the control (of which only Ca and Al co-locate). In contrast, there was a decrease in K between the control and salinity treatment. Hotspots of amide I and II were present in the cortex and pith of the salinity treated sample. Additionally, the salinity treatment resulted in an increased abundance of pectin and carbohydrates within the pith compared to the control, and the abundance of esters/carboxylic acid was greater in the salinity treatment. Conclusions: We determined that Cl and K, S and P, and biochemical components polysaccharide and pectin, esters and carboxylic acid, amide I and cellulose are the strongest drivers of salinity- treatment induced variability. In the cortex and phloem/xylem, a negative K-Ca correlation decreases in the salinity treatment. Several hotspots of elements and amide I (proteins) appear under salinity treatment, particularly in the cortex, suggesting an increase in the production of stress-related proteins (in response to high Cl) and/or structural proteins (i.e. Ca). Together, these results indicate that pistachio responds to salinity through ion compartmentalization coupled with a targeted biochemical adjustment, rather than a broadscale tissue-wide response. Overall, these novel, spatially resolved pixel-registered multimodal imaging data provide an enabling platform to understand the mechanisms of salinity tolerance in Pistacia spp and can be broadly applied to studying stress-related phenotype response in various plant tissues.

FTIR spectromicroscopy↗

DOE OSTI2026

Independent and interactive effects of wet bulb globe temperature and air pollution exposures on suicide mortality

Background: Individual components of the ambient environment, such as temperature and air pollution, exist as part of a complex mixture and have been associated with suicide; however, their interactive effects remain poorly understood. This study examined the independent and interactive effects of wet bulb globe temperature (WBGT), nitrogen dioxide (NO 2 ), and fine particulate matter (PM 2.5 ) on suicide mortality. Methods: We identified 7,551 suicide cases in Utah, USA, from 2000 to 2016 and assigned exposure to daily maximum WBGT (sourced from the European Center for Medium-Range Weather Forecasts) and PM 2.5 and NO 2 concentrations (sourced from a national spatiotemporal ensemble model) using decedent’s residential address at the time of death. A case-crossover design with conditional logistic regression was used to estimate the independent and interactive effects of WBGT max , PM 2.5 , and NO 2 on suicide. For exposure windows, we considered single days preceding suicide (lag 0 to 6) and their averages across preceding days (lag 0–1, 0–3, and 0–6). Analyses were stratified by season. Results: We identified a significant association between WBGT max and suicide across all seasons (odds ratio [OR] = 1.05, 95% confidence interval [CI]: 1.01, 1.10; per 5 °C increase on lag 0–3 days). The associations were stronger in the warm season (March 22 to September 21), with ORs and 95% CIs ranging from 1.08 (1.02, 1.15) to 1.20 (1.10, 1.30) per 5 °C increase depending on the lag periods. We observed synergistic interactions between WBGT max and PM 2.5 and NO 2 in the warm season, associated with higher odds of suicide. The associations of WBGT max with suicide were most pronounced at high NO 2 levels. Conclusions: We found evidence of synergistic interactions between WBGT max and PM 2.5 and NO 2 on suicide in the warm season, emphasizing the need for considering the combined effects of heat stress and air pollution in suicide prevention strategies.

Fine particulate matter↗

DOE OSTI2020

Stress-tolerant non-conventional microbes enable next-generation chemical biosynthesis

Microbial chemical production is a rapidly growing industry, with much of the growth fueled by advances in synthetic biology. New approaches have enabled rapid strain engineering for the production of various compounds; however, translation to industry is often problematic because native phenotypes of model hosts prevent the design of new low-cost bioprocesses. Here, in this work, we argue for a new approach that leverages the native stress-tolerant phenotypes of non-conventional microbes that directly address design challenges from the outset. Growth at high temperature, high salt and solvent concentrations, and low pH can enable cost savings by reducing the energy required for product separation, bioreactor cooling, and maintaining sterile conditions. These phenotypes have the added benefit of allowing for the use of low-cost sugar and water resources. Non-conventional hosts are needed because these phenotypes are polygenic and thus far have proven difficult to recapitulate in the common hosts Escherichia coli and Saccharomyces cerevisiae.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Mechanical behavior analysis using small-size graphite disc compression testing with digital image correlation methods

The ASTM International Standard Test Method for Tensile Stress-Strain of Carbon and Graphite (ASTM C749) requires dog-bone shaped specimens. Unfortunately, specimen sizes required in ASTM C749 are much too large for irradiation within a test reactor and are incompatible with irradiation capsule volumes, molten salt degradation facilities, or oxidation apparatus. The ASTM International Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite (ASTM D8289) was developed as an alternative that provides a means for testing tensile properties using smaller specimens when geometric constraints are present. However, the important stress–strain relation throughout the test loading history that could be recorded using ASTM C749 is lost by using ASTM D8289 because of the difficulties involved with using traditional strain gauges or extensometers on such a small specimen. In this work, a digital image correlation (DIC) method, which uses a full-field noncontact surface displacement measurement technique, was applied along with the ASTM D8289 splitting tensile test on eight small samples of graphite grade Mersen 2114 to track their deformation during compressive loading. Initial results showed that the DIC technique can measure the surface displacement/strain on these small (Ø6 × 3 mm) graphite specimens with high accuracy and good repeatability, indicating that the DIC technique, combined with the small-disc splitting tensile test in ASTM D8289, can capture the strain evolution in the test. In conclusion, further comparison of measured strains with analytical and numerical simulation results provides additional understanding of the mechanical behaviour of this nuclear graphite material in complex stress states.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Session 4: ASME Code Rules

General review of code rules What do they cover. What they don’t. Underlying assumptions Probability of failure Material property parameters Stresses and loads Degradation What is NonmetallicsWork Group (NWG) doing? Failure in components Redefining failure Degradation rules Oxidation degradation Irradiation degradation Molten Salt Issues Abrasion/Erosion

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2021

Compaction of crushed salt for safe containment – overview of the KOMPASS project

Abstract. In Germany, rock salt formations are possible host rock candidates for a repository for heat-emitting radioactive waste. The safety concept of a repository in salt bases on a multibarrier system consisting mainly of the geological barrier salt and geotechnical seals ensuring safe containment. Crushed salt will be used for backfilling of cavities and sealing measures in drifts and shafts due to its favourable properties and its easy availability (mined-off material). The creep of the rock salt leads to crushed salt compaction with time. Thereby, the crushed salts' porosity is reduced from the initial porosity of 30 %–40 % to a value comparable to the porosity of undisturbed rock salt (≤1 %). In such low porosity ranges, technical impermeability is assumed. The compaction behaviour of crushed salt is rather complex and involves several coupled THM processes (Kröhn et al., 2017; Hansen et al., 2014). It is influenced by internal properties like humidity and grain size distribution, as well as boundary conditions such as temperature, compaction rate or stress state. However, the current process understanding has some important gaps referring to the material behaviour, experimental database and numerical modelling. It needs to be extended and validated, especially in the low porosity range. The objective of the KOMPASS project was development of methods and strategies for the reduction of deficits in the prediction of crushed salt compaction leading to an improvement of the prognosis quality. Key results are as follows (KOMPASS Phase 1, 2020): selection of an easily available and permanently producible synthetic crushed salt mixture, acting as a reference material for generic investigations; development and proof of different techniques for producing pre-compacted samples for further investigations; establishment of a tool of microstructure investigation methods to demonstrate the comparability of grain structures of pre-compacted samples with in-situ compacted material for future investigations; execution of various laboratory experiments using pre-compacted samples, e.g. long-term creep tests which deliver reliable information about time- and stress-dependent compaction behaviour; development of a complex experimental investigation strategy to derive necessary model parameters considering individual functional dependencies. Its technical feasibility was successfully verified; benchmarking with various existing numerical models using datasets from three different triaxial long-term tests. The result was not entirely satisfactory; however, the number of influencing factors is small and further validation work has to be done. Overall, the KOMPASS project has made significant progress in the approaches to solving the outstanding question, building the basis for further investigations.

Friedenberg, Larissa↗

DOE OSTI2020

Impact of Soil Salinity on the Cowpea Nodule-Microbiome and the Isolation of Halotolerant PGPR Strains to Promote Plant Growth under Salinity Stress

Cowpea is one of the major legumes cultivated in arid and semiarid regions of the world. Four soil-microbial samples (SS-1 through SS-4) collected from semiarid soils in Punjab, Pakistan were planted with cowpea (Vigna unguiculata) crops, which were grown under salinity stress to analyze bacterial composition in the rhizosphere and within nodules using cultivation-dependent and -independent methods. Two varieties, 603 and the salt-tolerant CB 46, were each inoculated with or without the four different native soil samples or grown in medium either N-deficient (-N) or supplemented with N (+N). Plants inoculated with soil samples SS-2 and SS-4 grew better than plants inoculated with SS-1- and SS-3 and grew comparably with the +N controls. Environmental DNA (eDNA) was isolated from SS-1 and SS-4, and, by 16S ribosomal RNA sequencing, the soil microbiomes consisted mainly of Actinobacteria, Firmicutes, Proteobacteria, and other nonproteobacterial genera. However, analysis of eDNA isolated from cowpea nodules established by the trap plants showed that the nodule microbiome consisted almost exclusively of proteobacterial sequences, particularly species of Bradyrhizobium. Bacteria were isolated from both soils and nodules, and 34 of the 51 isolates tested positive for plant-growth-promoting rhizobacteria traits in plate assays. Many could serve as future inocula for crops in arid soils. The discrepancy between the types of bacteria isolated by culturing bacteria isolated from surface-sterilized cowpea nodules (proteobacteria and nonproteobacteria) versus those detected by sequencing DNA isolated from the nodules (proteobacteria) from cowpea nodules (proteobacteria and nonproteobacteria) versus those detected in the nodule microbiome (proteobacteria) needs further study.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

Bayesian Calibration of Nuclear Graphite Property Models Accounting for Model Inadequacy and Impacts on Component Performance

Nuclear-grade structural graphite is extensively utilized in the core designs of various advanced nuclear reactors. In the reactor environment, graphite is subjected to prolonged exposure to extreme conditions, including high temperatures, radiation, and potentially molten salt and oxygen. Such exposure can induce several degradation mechanisms in graphite, including nonuniform volumetric strains caused by irradiation and thermal expansion, leading to stresses that may compromise the performance of graphite components. Assessing component integrity requires accurate models of graphite's thermomechanical response. This report documents the Bayesian calibration of thermomechanical properties for nuclear-grade graphite and their application to graphite component modeling and simulation using the Grizzly code. As part of this work, uncertainty-quantified models were developed for the elastic modulus, coefficient of thermal expansion, irradiation-induced dimensional change, and irradiation-induced creep for graphite grades IG-110, NBG-18, NBG-17, PCEA, and 2114. Using a hierarchical Bayesian approach, multiple experimental data sources were combined to develop Gaussian process models for the properties. Using the Kennedy O'Hagan framework, the uncertainties due to inadequacies in the model and the inherent spread in the experimental data were quantified for three different models. These uncertainty-quantified models, with a model-form correction, were subsequently applied to a coupled-physics simulation of representative graphite components, revealing that the uncertainties have a large impact on the components' deformation.

36 - MATERIALS SCIENCE↗

DOE OSTI2020

Shear Behavior of Artificial Clay Seams within Bedded Salt Structures

Bedded salt contains thin layers of clay, also known as clay seams, in-between far thicker layers of salt. These inhomogeneities are thought to have first-order effects on the closure of nearby drifts and potential roof collapses. Despite their importance, characterizations of the peak shear strength and residual shear strength of clay seams in salt are extremely rare in the published literature. A previous paper reported results from laboratory direct shear experiments on clay seam samples from the Permian Basin in New Mexico. These clay seams behaved similar to intact salt, which was attributed to the abundance of salt crystals intersecting the clay seams. None of those specimens contained a distinct ¼" - ½" (6 -12 mm) thick clay seam, as has been observed in drifts at the Waste Isolation Pilot Plant (WIPP). Due to the difficulty in obtaining WIPP samples with these types of clay seams, artificial seams of bentonite and brine sandwiched between sections of salt were created and shear tested. Eight 4" diameter samples were created with either a ¼" or ½" a thick seam and then consolidated at 3000 psi prior to shear testing. The direct shear tests on these samples were performed at nominal normal stresses representative of expected WIPP in-situ conditions (500 to 1500 psi). The resulting shear stress vs. shear displacement curves exhibited a peak followed by a gradual decay of shear strength. The shear stress never transitioned to a true residual shear stress plateau, so the final shear strength at the end of each test (0.75" of shear displacement) was analyzed instead. Both the peak shear strength and the final shear strength conformed to Mohr- Coulomb behavior with friction angles and cohesion strengths consistent with a saturated, highly consolidated, clay. These new artificial clay seam results and the previous clay-interspersed-with-salt results likely bound the expected shear behavior of WIPP clay seams.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2026

Genetic analyses of leaf traits in an interspecific Zoysia japonica × Zoysia matrella F2 population

Zoysiagrass (Zoysia spp.) is an important warm-season turfgrass cultivated across tropical, subtropical, and temperate regions of the world. The genus is characterized by the presence of salt-secreting glands on the adaxial leaf surface, which contribute to its high salt tolerance. In this study, we analyzed an interspecific F2 population, derived from selfing an F1 from a cross between Z. japonica acc. Meyer and Z. matrella acc. PI 231146, for variation in adaxial salt gland density, leaf width, and vein count. Using composite interval mapping with a previously constructed genetic map as a framework, we identified three quantitative trait loci (QTL) for leaf width, two QTL for vein count, and two QTL for salt gland density. We complemented the QTL analysis with bulked segregant RNA-seq (BSR-seq) to identify shared genomic regions and candidate genes for leaf width and salt gland density. BSR-seq identified four trait-associated regions, but only a single region identified for leaf width on Chr08 overlapped with a QTL for the same trait. We highlight putative candidate genes underlying the leaf width and salt gland density QTL and discuss their potential roles in leaf development. Together, the QTL and candidate genes provide an important resource for breeding stress-resilient Zoysia germplasm.

Pradhan, Shreena [University of Georgia, Athens]↗