Search NASA⌕ Search

SEARCH · Search NASA

Results for “science value”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effects of mechanically alloying Al 2 O 3 and Y 2 O 3 additives on the liquid phase sintering behavior and properties of SiC

In order to improve the sintering of SiC, mixtures of Al 2 O 3 and Y 2 O 3 powders are commonly included as sintering additives. The aim of this work was to use mechanically alloyed Al 2 O 3 –Y 2 O 3 mixtures as sintering additives to promote liquid phase sintering of SiC using spark plasma sintering. The results showed that milling reduced the particle size of the powders and led to the formation of complex oxide phases (YAP, YAM, and YAG) at low temperatures. As the ball milling time increased, the mass loss of specimens sintered with mechanically alloyed Al 2 O 3 –Y 2 O 3 mixtures decreased, and accordingly the relative density increased. However, the hardness and flexural strength of sintered SiC specimens first increased and then decreased. Because the specimens prepared with oxides milled for a long time contained too much YAG/YAP and accordingly too much liquid at sintering temperature. This negatively affected the mechanical properties of the SiC specimens because of the increased volume of the complex oxide phases, which have inferior mechanical properties to SiC, in the sintered specimens. In conclusion, when the ball milling time was 6h, the hardness (24.02 GPa) and flexural strength (655.61 MPa) of the SiC specimens reached maximum values.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Using Temporal Deep Learning Models to Estimate Daily Snow Water Equivalent Over the Rocky Mountains

Abstract In this study we construct and compare three different deep learning (DL) models for estimating daily snow water equivalent (SWE) from high‐resolution gridded meteorological fields over the Rocky Mountain region. To train the DL models, Snow Telemetry (SNOTEL) station‐based SWE observations are used as the prediction target. All DL models produce higher median Nash‐Sutcliffe Efficiency (NSE) values than a conceptual SWE model and interpolated gridded data sets, although mean squared errors also tend to be higher. Sensitivity of the SWE prediction to the model's input variables is analyzed using an explainable artificial intelligence (XAI) method, yielding insight into the physical relationships learned by the models. This method reveals the dominant role precipitation and temperature play in snowpack dynamics. In applying our models to estimate SWE throughout the Rocky Mountains, an extrapolation problem arises since the statistical properties of SWE (e.g., annual maximum) and geographical properties of individual grid points (e.g., elevation) differ from the training data. This problem is solved by normalizing the SWE with its historical maximum value to alleviate extrapolation for all tested DL models. Our work shows that the DL models are promising tools for estimating SWE, and sufficiently capture relevant physical relationships to make them useful for spatial and temporal extrapolation of SWE values.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Influence of birefringent fibre joints on the visibility drift in a Mach – Zehnder interferometer

It is shown that imperfect joints of linear birefringent fibres in a fibre interferometer may result in an uncontrolled visibility drift under varying environmental conditions even with a standard phase matching device. As an example, a double Mach – Zehnder interferometer is considered, which is employed in schemes of quantum key distribution. Results of numerical simulation demonstrate the standard deviation of the quantum bit error rate (QBER), which is comparable to an average QBER value. (paper)

36 MATERIALS SCIENCE↗
DOE OSTI2022

Analysis of FRAM Measurements to Establish Methodology Uncertainty

Qualification measurements were performed at Oak Ridge National Laboratory (ORNL) on a variety of measurement standards. These measurements will be used to qualify the Fixed-Energy, Response Function Analysis with Multiple Efficiency (FRAM) code with a high purity germanium (HPGe) detector for use at ORNL. Measured items include uranium isotopic standards, U 3 O 8 line sources, and a uranium tetrafluoride source. The 235 U enrichment was estimated using the FRAM isotopic analysis software for each source and compared with the declared isotopic values.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Development of the ARM Lagrangian Large-Scale Forcing Data (ARMLAGTRAJ) Value-Added Product Based on the lagtraj Framework

The Atmospheric Radiation Measurement (ARM) large-scale forcing data developed based on the constrained variational analysis (VARANAL) value-added product (VAP) (Zhang and Lin 1997, Zhang et al. 2001, Xie et al. 2004, Tang et al. 2019) has been widely used for single-column models (SCMs), cloud-resolving models (CRMs), and large-eddy simulation models (LESs) to understand and improve physical processes in models. Recently, the U.S. Department of Energy (DOE) ARM user facility conducted several major field campaigns using ship-based moving observational platforms. For example, the Marine ARM GPCI Investigation of Clouds (MAGIC) field campaign focused on the role of subtropical marine-boundary layer (MBL) clouds, and the Multidisciplinary Drifting Observatory for the Study of Arctic Climate (MOSAiC) field campaign aimed to improve understanding of the coupled climate systems in the Arctic. Observations from moving platforms are critical to provide a comprehensive characterization of coupled-system processes associated with all stages of the cloud and/or sea-ice life cycle. Traditional ARM large-scale forcing data have been developed at fixed locations. They need to be extended to include these moving platforms to address data needs for ship-based field campaigns or to support LES modeling in a Lagrangian framework. With these considerations in mind, we develop ARM-type Lagrangian large-scale forcing data sets based on the lagtraj framework (Boeing et al. 2020) with notable enhancements in generating forcings that are more suitable for ARM field campaigns. The lagtraj is a novel tool that generates forcings for LES and SCM simulation in both Lagrangian and Eulerian perspective. This technical report focuses on the major changes we performed on the lagtraj algorithm and provides an overview of the ARM Lagrangian Large-Scale Forcing Data (ARMLAGTRAJ) value-added products.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Science & Technology Review: Climate Change Comes into Focus

At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world. The cover image shows a simulation run on the Department of Energy’s (DOE’s) state-of-the-science Energy Exascale Earth Systems Model (E3SM), which leverages DOE’s advanced supercomputers for climate and earth science research. As the article beginning on p. 4 describes, the newly released version 2 will be used to simulate aspects of Earth’s variability at weather-scale resolution and investigate decadal changes in climate that will critically impact the United States in coming years.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Current and future federal and state sampling guidance for per- and polyfluoroalkyl substances in environmental matrices

Per- and polyfluoroalkyl substances (PFAS) are a class of emerging contaminants composed of an estimated 5000 to 10,000 human-made, fluorinated, organic chemicals. Due to the complexity of PFAS, the need for multiple environmental matrix considerations and the absence of a promulgated federal standard for environmental sampling and analysis, U.S. states have begun developing health-based regulatory and/or guidance values for a limited number of PFAS in environmental matrices. As there is a growing body of science to inform PFAS sampling guidance standard development, it is important to understand which U.S. states are implementing sampling guidelines and how they plan to handle emerging PFAS. This critical review discusses the current and impending federal and state sampling guidelines for PFAS in environmental matrices, the data gaps surrounding PFAS sampling guidance in U.S. states, and the future impacts of impending guidance documents and regulations. Ten federal guidance documents are available for PFAS sampling guidance and analysis. The maximum number of PFAS covered in these guidance documents is 25 analytes spanning across 8 unique media. While the EPA has developed several different sampling and analytical guidelines for PFAS, there is no formal regulation of PFAS or requirements of states to enforce these guidelines. Consequently, only 31 states have informally adopted sampling guidelines, while the other 19 states have no guidance documentation in place for PFAS. The introduction of new PFAS sampling guidelines by the EPA, as well as updated analytical guidelines that target more PFAS or total organofluoride, is expected to continuously shift the landscape of federal and state guidance for PFAS sampling moving forward.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Spitzer IRAC Photometry of JWST Calibration Stars

We present infrared photometry of all 36 potential JWST calibrators for which there is archival Spitzer IRAC data. This photometry can then be used to inform the stellar models necessary to provide absolute calibration for all JWST instruments. We describe in detail the steps necessary to measure IRAC photometry from archive retrieval to photometric corrections. To validate our photometry, we examine the distribution of uncertainties from all detections in all four IRAC channels as well as compare the photometry and its uncertainties to those from models, ALLWISE, and the literature. Seventy-five percent of our detections have standard deviations per star of all observations within each channel of less than 3%. The median standard deviations are 1.2%, 1.3%, 1.1%, and 1.9% in [3.6]–[8.0], respectively. We find less than 8% standard deviations in differences of our photometry with ALLWISE and excellent agreement with literature values (less than 3% difference), lending credence to our measured fluxes. JWST is poised to do groundbreaking science, and accurate calibration and cross-calibration with other missions will be part of the underpinnings of that science.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

CheKiPEUQ Intro 1: Bayesian Parameter Estimation Considering Uncertainty or Error from both Experiments and Theory**

A common goal is extraction of physico-chemical parameter values such as pre-exponentials and activation energies from experiment. Ever increasing knowledge from experiments and computations is enabling semi-quantitative prior predictions of such values. When prior knowledge of physically realistic ranges is available, a method named Bayesian parameter estimation (BPE) enables more physically realistic parameter estimation relative to unsophisticated fitting by seeking the most probable value when considering together the uncertainties from prior knowledge, experimental data, and approximations in the model. An impediment to widespread use of BPE is a lack of understanding, training, and user-friendly software. Along with this invited publication, a general software package for BPE is being released that is user-friendly and that does not require understanding of the math behind the methodology. Overall, two previously unpublished catalysis science examples are provided along with considerations and guidelines for successful application of BPE. Following this work, BPE can become more widespread to enable extraction of physically meaningful parameter values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A time-dependent chloride diffusion model for predicting initial corrosion time of reinforced concrete with slag addition

The effect of granulated blast furnace slag (GBFS) addition on the threshold chloride concentration (TCC) for rebar corrosion was investigated. A modified diffusion model, coupled with a time-dependent effective diffusion coefficient and surface chloride concentration, was proposed to predict the chloride profile. The corrosion initiation time was estimated based on the model predictions and the measured TCC. The results indicate that adding GBFS decreases the TCC by lowering the pH value of the pore solution. The evolution of corrosion potential and current density is found to obey a 3-parameter Weibull distribution. MIP tests show that adding GBFS contributes to refinement of pore structure by decreasing the fraction of large capillary pores. The time-dependent model exhibits good predictive strength and helps understand how GBFS addition delays the corrosion initiation by retarding the chloride diffusion, though a lower TCC is obtained.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Science & Technology Review March 2021

At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

08 HYDROGEN↗
DOE OSTI2020

Science & Technology Review August 2020

At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Optimized production of a bioactive human recombinant protein from the microalgae Chlamydomonas reinhardtii grown at high density in a fed-batch bioreactor

Microalgae have been identified as an alternative platform to produce high-quality biomass and subsequent bioproducts, such as foods, feeds, nutritional supplements, recombinant proteins, and biofuels. Traditional biotechnological hosts for therapeutic proteins, such as the bacteria Escherichia coli and mammalian CHO cells, have long been established as the dominate platforms, but recent advances have shown that microalgae can potentially serve as an alternative platform. In the present study, we examine the potential of the microalga Chlamydomonas reinhardtii to produce a complex human recombinant protein in a high-density heterotrophic culture. The recombinant human protein, ICAM-1, was targeted for secretion to the extracellular media of the culture from cells grown in a bioreactor using a fed-batch strategy to achieve high cell density. Ultimately, this resulted in a maximum biomass titer of 40 g/L and a recombinant protein titer of 50 mg/L. The algal-produced ICAM-1 protein showed comparable bioactivity to mammalian cell culture produced ICAM-1, as measured using binding assays for its native ligand LFA-1. This work shows that C. reinhardtii is a viable option to produce complex recombinant proteins, with native biological activity, at high concentrations using a fed batch heterotrophic growth strategy.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Spatially quasi-periodic bifurcations from periodic traveling water waves and a method for detecting bifurcations using signed singular values

We present a method of detecting bifurcations by locating zeros of a signed version of the smallest singular value of the Jacobian. This enables the use of quadratically convergent root-bracketing techniques or Chebyshev interpolation to locate bifurcation points. Only positive singular values have to be computed, though the method relies on the existence of an analytic or smooth singular value decomposition (SVD). The sign of the determinant of the Jacobian, computed as part of the bidiagonal reduction in the SVD algorithm, eliminates slope discontinuities at the zeros of the smallest singular value. We use the method to search for spatially quasi-periodic traveling water waves that bifurcate from large-amplitude periodic waves. The water wave equations are formulated in a conformal mapping framework to facilitate the computation of the quasi-periodic Dirichlet-Neumann operator. We find examples of pure gravity waves with zero surface tension and overhanging gravity-capillary waves. In both cases, the waves have two spatial quasi-periods whose ratio is irrational. We follow the secondary branches via numerical continuation beyond the realm of linearization about solutions on the primary branch to obtain traveling water waves that extend over the real line with no two crests or troughs of exactly the same shape. The pure gravity wave problem is of relevance to ocean waves, where capillary effects can be neglected. Such waves can only exist through secondary bifurcation as they do not persist to zero amplitude. The gravity-capillary wave problem demonstrates the effectiveness of using the signed smallest singular value as a test function for multi-parameter bifurcation problems. This test function becomes mesh independent once the mesh is fine enough.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Evaluation of phenolic antioxidant capacity in beverages based on laccase immobilized on screen-printed carbon electrode modified with graphene nanoplatelets and gold nanoparticles

A simple and highly sensitive electrochemical biosensor based on laccase immobilized onto a gold nanoparticles/graphene nanoplatelets-modified screen-printed carbon electrode (LACC/AuNP/GNPl/SPCE) was developed for the determination of hydroquinone (HQ) and other phenolic compounds. The biosensor shows excellent electro-catalytic activity towards oxidation of hydroquinone at a potential of -0.05 V (vs Ag/AgCl, 3 M KCl) in phosphate buffer as supporting electrolyte (0.1 M, pH 7.0) using hydrodynamic amperometry. Analytical characteristics uncover that the LACC/AuNP/GNPl/SPCE comprises a wide linear range for the dependence of the signal on HQ concentrations from 4 to 130 µM with a detection limit (3σ) of 1.5 µM. The repeatability (5 measurements, 100 µM hydroquinone) is ±2% and the reproducibility (5 biosensors, 100 µM hydroquinone) is ±3%. Interference studies of most common compounds with the determination of hydroquinone demonstrated negligible effects. Finally, the biosensor and the analytical method were applied to the determination of phenolic antioxidant capacity (AOC) in wine and blueberry syrup based on Trolox (6‑hydroxy‑2,5,7,8-tetramethylchromane-2-carboxylic acid) and hydroquinone equivalents. The results were evaluated by using their calibration curves which were satisfactory and agreed well with the results obtained by the reference method Trolox Equivalent Antioxidant Capacity assay (TEAC-Assay).

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

PLEKHA7 signaling is necessary for the growth of mutant KRAS driven colorectal cancer

Plekha7 (Pleckstrin homology [PH] domain containing, family A member 7) regulates the assembly of proteins of the cytoplasmic apical zonula adherens junction (AJ), thus ensuring cell-cell adhesion and tight-junction barrier integrity. Little is known of Plekha7 function in cancer. In colorectal cancer (CRC) Plekha7 expression is elevated compared to adjacent normal tissue levels, increasing with clinical stage. Plekha7 was present at plasma membrane AJ with wild-type KRas (wt-KRas) but was dispersed in cells expressing mutant KRas (mut-KRas). Fluorescence lifetime imaging microscopy (FLIM) indicated a direct Plekha7 interaction with wt-KRas but scantily with mut-KRas. Inhibiting Plekha7 specifically decreased mut-KRas cell signaling, proliferation, attachment, migration, and retarded mut-KRAS CRC tumor growth. Binding of diC8-phosphoinositides (PI) to the PH domain of Plekha7 was relatively low affinity. This may be because a D175 amino acid residue plays a “sentry” role preventing PI(3,4)P{sub 2} and PI(3,4,5)P{sub 3} binding. Molecular or pharmacological inhibition of the Plekha7 PH domain prevented the growth of mut-KRas but not wt-KRas cells. Taken together the studies suggest that Plekha7, in addition to maintaining AJ structure plays a role in mut-KRas signaling and phenotype through interaction of its PH domain with membrane mut-KRas, but not wt-KRas, to increase the efficiency of mut-KRas downstream signaling.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Thermal extremes in regulated river systems under climate change: an application to the southeastern U.S. rivers

High river temperatures, or “thermal extremes”, can cause fish mortality and thermoelectric powerplant derating. Under climate change, projected higher air temperature and stronger surface energy fluxes will lead to increased water temperatures, exacerbating thermal extremes. However, cold hypolimnetic releases from thermally stratified reservoirs can depress tailwater temperatures and therefore alleviate thermal extremes. Thermal extremes are more harmful when they coincide with low flows, which we refer to as “hydrologic hot-dry events”. To assess multisectoral impacts of climate change over large regions, we evaluate thermal events according to three impact attributes: duration (D), intensity (I), and severity (S). We apply an established model framework to simulate streamflow and stream temperature over the southeastern US regulated river system. We quantify climate change impacts (by the 2080s under RCP8.5) by comparing historical and future periods and quantify regulation impacts by comparing unregulated and regulated scenarios. We find that climate change will exacerbate thermal extremes (all three metrics) in both unregulated and regulated scenarios, albeit less in the regulated scenario. Thermal mitigation from reservoir regulation will be stronger under climate change, decreasing the three metrics compared to the unregulated case. Even so, thermal extremes in the regulated scenario will still be more severe under climate change, and only 12.2%, 19.7%, and 26.0% of D, I, and S can be mitigated by reservoirs. Despite stronger reservoir stratification, the number of regulated river segments that experience simultaneous high temperature and low flow events (hydrologic hot-dry events) will increase by 21.4% by the 2080s under RCP8.5. These events will have a median annual duration of 10.3 days/year, over 10 times the historical value.

54 ENVIRONMENTAL SCIENCES↗