Search NASA⌕ Search

SEARCH · Search NASA

Results for “semiconductors electron spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Amplitude-mode spectroscopy of chemically injected and photogenerated charge carriers in semiconducting single-walled carbon nanotubes

In one-dimensional semiconductors such as conjugated polymers and semiconducting single-walled carbon nanotubes (s-SWCNTs), injected charge carriers (electrons or holes) can have profound impacts on both electronic conductivity and optical spectra, even at low carrier densities. Understanding charge-related spectral features is a key fundamental challenge with important technological implications. Here, we employ a systematic suite of experimental and theoretical tools to understand the mid-infrared charge signatures of heavily p-type doped polymer-wrapped s-SWCNTs. Across a broad range of nanotube diameters, we find that hole charge carriers induce strong Fano anti-resonances in mid-infrared transmission spectra that correspond to defect-related (D-band) and in-plane tangential (G-band) Raman-active vibrational modes, along with anti-resonances arising from infrared (IR)-active polymer and SWCNT modes. We employ 13C isotope-labeled s-SWCNTs and a removable wrapping polymer to clarify the relative intensities, energies, and sources of all observed anti-resonances. Simulations performed with the "amplitude mode model" are used to quantitatively reproduce Raman spectra and also help to explain the outsized intensity of the D-band anti-resonance, relative to the G-band, observed for both moderately and degenerately doped s-SWCNTs. Here, the results provide a framework for future studies of ground- and excited-state charge carriers in s-SWCNTs and a variety of low-dimensional materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Comparing the structures and photophysical properties of two charge transfer co-crystals

Organic co-crystals have emerged as a promising class of semiconductors for next-generation optoelectronic devices due to their unique photophysical properties. This paper presents a joint experimental-theoretical study comparing the crystal structure, spectroscopy, and electronic structure of two charge transfer co-crystals. Reported herein is a novel co-crystal Npe:TCNQ, formed from 4-(1-naphthylvinyl)pyridine (Npe) and 7,7,8,8-tetracyanoquinodimethane (TCNQ) via molecular self-assembly. This work also presents a revised study of the co-crystal composed of Npe and 1,2,4,5-tetracyanobenzene (TCNB) molecules, Npe:TCNB, herein reported with a higher-symmetry (monoclinic) crystal structure than previously published. Npe:TCNB and Npe:TCNQ dimer clusters are used as theoretical model systems for the co-crystals; the geometries of the dimers are compared to geometries of the extended solids, which are computed with periodic boundary conditions density functional theory. UV-Vis absorption spectra of the dimers are computed with time-dependent density functional theory and compared to experimental UV-Vis diffuse reflectance spectra. Both Npe:TCNB and Npe:TCNQ are found to exhibit neutral character in the S 0 state and ionic character in the S 1 state. In conclusion, the high degree of charge transfer in the S 1 state of both Npe:TCNB and Npe:TCNQ is rationalized by analyzing the changes in orbital localization associated with the S 1 transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Classification of Semiconductors Using Photoluminescence Spectroscopy and Machine Learning

Photoluminescence spectroscopy is a nondestructive optical method that is widely used to characterize semiconductors. In the photoluminescence process, a substance absorbs photons and emits light with longer wavelengths via electronic transitions. This paper discusses a method for identifying substances from their photoluminescence spectra using machine learning, a technique that is efficient in making classifications. Neural networks were constructed by taking simulated photoluminescence spectra as the input and the identity of the substance as the output. Here, six different semiconductors were chosen as categories: gallium oxide (Ga 2 O 3 ), zinc oxide (ZnO), gallium nitride (GaN), cadmium sulfide (CdS), tungsten disulfide (WS 2 ), and cesium lead bromide (CsPbBr 3 ). The developed algorithm has a high accuracy (>90%) for assigning a substance to one of these six categories from its photoluminescence spectrum and correctly identified a mixed Ga 2 O 3 /ZnO sample.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Simultaneous Observation of Carrier-Specific Redistribution and Coherent Lattice Dynamics in 2H-MoTe 2 with Femtosecond Core-Level Spectroscopy

In this study, we employ few-femtosecond extreme ultraviolet (XUV) transient absorption spectroscopy to reveal simultaneously the intra- and interband carrier relaxation and the light-induced structural dynamics in nanoscale thin films of layered 2H-MoTe 2 semiconductor. By interrogating the valence electronic structure via localized Te 4 d (39-46 eV) and Mo 4 p (35-38 eV) core levels, the relaxation of the photoexcited hole distribution is directly observed in real time. We obtain hole thermalization and cooling times of 15 ± 5 fs and 380 ± 90 fs, respectively, and an electron-hole recombination time of 1.5 ± 0.1 ps. Furthermore, excitations of coherent out-of-plane A 1g (5.1 THz) and in-plane E 1g (3.7 THz) lattice vibrations are visualized through oscillations in the XUV absorption spectra. By comparison to Bethe-Salpeter equation simulations, the spectral changes are mapped to real-space excited-state displacements of the lattice along the dominant A 1g coordinate. By directly and simultaneously probing the excited carrier distribution dynamics and accompanying femtosecond lattice displacement in 2H-MoTe 2 within a single experiment, our work provides a benchmark for understanding the interplay between electronic and structural dynamics in photoexcited nanomaterials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Tracking Optical Phonon Dynamics in InP Nanocrystals via Transient Absorption and Femtosecond Stimulated Raman Spectroscopy

Semiconductor nanocrystals (NCs) offer actualized and prospective utility in optoelectronic technologies, yet key aspects of their thermal and vibrational behaviors remain unresolved. Compared with bulk crystals, heat dissipation involving NCs can differ substantially owing to pervasiveness of interfacial scattering, phonon confinement, and relaxed phonon momentum selection rules, as well as influences of ligands. Here, in addition to transient absorption, we use femtosecond stimulated Raman spectroscopy to track nonequilibrium optical-phonon dynamics in InP NCs capped with myristic acid ligands and compare the same particles coated with a ZnS shell. We identify distinct phonon decay pathways in ligand-capped versus ZnS-shelled NCs. Increasing the excitation density and introducing the ZnS shell measurably modify optical-phonon lifetimes, whereas phonon formation times remain largely unchanged. In addition, we observe phonon mode softening in ligand-capped nanocrystals, consistent with lattice expansion. Together, these results demonstrate that core–shell structures can strongly govern nanocrystal thermal dissipation pathways and should be considered a key design parameter for optoelectronic operation.

dissipation↗
DOE OSTI2025

Atoms-to-devices models for post-irradiation annealing kinetics in III-V semiconductors

Understanding atomic displacement damage and propagating this understanding into validated defect-aware radiation damage models is a critical step toward achieving predictive, atoms-to-systems assessment of radiation vulnerabilities of microelectronics. These models are essential for evaluating the performance and reliability of nuclear stockpile components or space-based electronics (satellites). The goal of this project was to bridge a fundamental science gap between defect spectroscopies and atomistic modeling of radiation-induced defects on the one hand, and simulations of device response on the other hand, to develop predictive defect-aware damage models for high-fidelity device simulations of radiation-damaged III-V semiconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Optical properties of semiconductor nanoparticles doped with 3d and 4f block elements

Doped inorganic nanoparticles (NPs) have enabled researchers across multiple disciplines to create new materials with unique optical, electronic, magnetic, electrical, chemical, and/or compositional properties. In the quest for generating newer functional materials with controlled optical and electronic properties, the use of d- and f-block elements as dopants in the inorganic NPs remain at the forefront of research. This article summarizes experiments that identify the important control parameters, in the form of NP core and surface properties, for promoting host-sensitized dopant emission from d- and f-doped inorganic/semiconductor NPs. We conclude that energy offsets between the dopant and NP electronic levels and an understanding of the charge trapping mechanisms can be used to predict dopant luminescence, and we claim that these features can be used to choose NP host materials by design, rather than by trial and error.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Quantifying interfacial energetics of 2D semiconductor electrodes using in situ spectroelectrochemistry and many-body theory

Hot carrier extraction occurs in 2D semiconductor photoelectrochemical cells. Boosting the energy efficiency of hot carrier-based photoelectrochemical cells requires maximizing the hot carrier extraction rate relative to the cooling rate. One could expect to tune the hot carrier extraction rate constant (k ET ) via a Marcus–Gerischer relationship, where k ET depends exponentially on ΔG°' (the standard driving force for interfacial electron transfer). ΔG°' is defined as the energy level difference between a semiconductor's conduction/valence band (CB/VB) minima/maxima and the redox potential of reactant molecules in solution. A major challenge in the electrochemistry community is that conventional approaches to quantify ΔG°' for bulk semiconductors (e.g., Mott–Schottky measurements) cannot be directly applied to ultrathin 2D electrodes. The specific problem is that enormous electronic bandgap changes (>0.5 eV) and CB/VB edge movement take place upon illuminating or applying a potential to a 2D semiconductor electrode. Here, we develop an in situ absorbance spectroscopy approach to quantify interfacial energetics of 2D semiconductor/electrolyte interfaces using a minimal many-body model. Our results show that band edge movement in monolayer MoS 2 is significant (0.2–0.5 eV) over a narrow range of applied potentials (0.2–0.3 V). Such large band edge shifts could change k ET by a factor of 10–100, which has important consequences for practical solar energy conversion applications. We discuss the current experimental and theoretical knowledge gaps that must be addressed to minimize the error in the proposed optical approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Quantitative assessment of selenium diffusion and passivation in CdSeTe solar cells probed by spatially resolved cathodoluminescence

The introduction of selenium in CdSeTe/CdTe solar cells has led to improved device performances attributed to the passivation of bulk defects. In this work, high-resolution cathodoluminescence experiments are performed on a series of CdSeTe/CdTe thin films with different Se concentrations to quantify the mechanisms and the passivation role of Se. We demonstrate a universal dependence between the Se concentration and the radiative efficiency and a ten-fold enhancement of the luminescence between CdTe and CdSe 0.4 Te 0.6 . Raw luminescence maps are converted into maps of the Se concentration, revealing its graded profile within the stack. We demonstrate the diffusion of Se along CdTe grain boundaries induced by the cadmium chloride annealing treatment and determine the diffusion coefficients, which are more than eight times higher at grain boundaries than in grain interiors. These results provide microscopic insights into the distribution of Se and its impact on the passivation of CdSeTe/CdTe solar cells.

14 SOLAR ENERGY↗
DOE OSTI2024

Directing Charge Carriers and Ferroelectric Domains at Lateral Interfaces in van der Waals Heterostructures

Emergent phenomena in traditional ferroelectrics are frequently observed at heterointerfaces. Accessing such functionalities in van der Waals ferroelectrics requires the formation of layered heterostructures, either vertically stacked (similar to oxide ferroelectrics) or laterally stitched (without equivalent in 3D-crystals). Here, we investigate lateral heterostructures of the ferroelectric van der Waals semiconductors SnSe and SnS. A two-step process produces ultrathin crystals comprising an SnSe core laterally joined to an SnS edge-band, as confirmed by Raman spectroscopy, transmission electron microscopy (TEM) imaging, and electron diffraction. TEM shows a moiré pattern across the SnSe core due to coverage by an ultrathin SnS layer. The ability of the lateral interface (IF) to direct excited carriers, probed by cathodoluminescence, shows electron transfer over 560 nm diffusion length from the SnS edge-band. Large, thin flakes supporting ferroelectricity allow investigating domains and domain wall interactions in uniform crystals and lateral heterostructures. Polarized optical microscopy of sub-20 nm flakes consistently shows ⟨110⟩ oriented stripe domains with mirror-twin domain walls. Heterostructures adopt two domain configurations, with domains either constrained to the SnSe core or propagating across the entire SnSe–SnS flakes. Furthermore, the combined results demonstrate multifunctional van der Waals heterostructures with high-quality IFs presenting extraordinary opportunities for manipulating carrier flows and ferroelectric domain patterns.

2D ferroelectrics↗
DOE OSTI2021

In situ study of the electronic structure of polar-to-polar SrTiO 3 /($000\bar1$)ZnO heterointerface

The SrTiO 3 (STO)/ZnO heterointerface, which is widely used in the fabrication of novel optoelectronic devices, is a classical system combining functional perovskite oxides and wurtzite-structure semiconductor materials. The electronic structure of the heterointerface often plays a significant role in controlling the functions of novel devices. In this study, the electronic structure was explored using in situ photoemission spectroscopy and X-ray absorption spectroscopy. X-ray diffraction results showed the coexistence of (111) STO and (011) STO orientations for the STO film deposited on the ZnO-($000\bar1$) substrate via pulsed laser deposition. High-resolution transmission electron microscopic results revealed two types of polar interfaces: [$11\bar2$][$10\bar1$](111) STO //[$1\bar210$][$10\bar10$]($000\bar1$) ZnO and [111][$2\bar1\bar1$](011) STO //[$10\bar21$][$10\bar10$]($000\bar1$)ZnO. In situ photoemission spectroscopic results revealed downward band bending and the transformation of the valence states of Ti from 4+ to 3+, with extra electrons transferring to the hybridization states between O 2p and Ti t 2g orbitals at the polar-to-polar STO/ZnO interface. We propose that the polar discontinuity drives the electron transfer to the STO/ZnO interface during the growth process. This study provides insight into the electronic structure of the STO/($000\bar1$)ZnO heterointerface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Local electric field measurement in GaN diodes by exciton Franz–Keldysh photocurrent spectroscopy

The eXciton Franz–Keldysh (XFK) effect is observed in GaN p–n junction diodes via the spectral variation of photocurrent responsivity data that redshift and broaden with increasing reverse bias. Photocurrent spectra are quantitatively fit over a broad photon energy range to an XFK model using only a single fit parameter that determines the line shape and the local bias (V l ), uniquely determining the local electric field maximum and depletion widths. As expected, the spectrally determined values of V l vary linearly with the applied bias (V) and reveal a large reduction in the local electric field due to electrostatic non-uniformity. The built-in bias (V bi ) is estimated by extrapolating V l at V=0, which, when compared with independent C-V measurements, indicates an overall ±0.31 V accuracy of V l . This demonstrates sub-bandgap photocurrent spectroscopy as a local probe of electric field in wide bandgap diodes that can be used to map out regions of device breakdown (hot spots) for improving electrostatic design of high-voltage devices.

42 ENGINEERING↗
DOE OSTI2023

Vertical β -Ga2O3 metal–insulator–semiconductor diodes with an ultrathin boron nitride interlayer

In this work, we demonstrate the high performance of β-Ga2O3 metal–insulator–semiconductor (MIS) diodes. An ultrathin boron nitride (BN) interlayer is directly grown on the Ga2O3 substrate by pulsed laser deposition. X-ray photoelectron spectroscopy, Raman spectroscopy, and high-resolution transmission electron microscopy confirm the existence of a 2.8 nm BN interlayer. Remarkably, with the insertion of the ultrathin BN layer, the breakdown voltage is improved from 732 V for Ga2O3 Schottky barrier diodes to 1035 V for Ga2O3 MIS diodes owing to the passivated surface-related defects and reduced reverse leakage currents. Our approach shows a promising way to improve the breakdown performance of Ga2O3-based devices for next-generation high-power electronics.

Physics↗
NASA NTRS1980

Crystal growth of device quality GaAs in space

The apparatus and techniques used in effort to determine the relationships between crystal growth and electronic properties are described with emphasis on electroepitaxy and melt-grown gallium aresenide crystal. Applications of deep level transient spectroscopy, derivative photocapitance spectroscopy, and SEM-cathodoluminescene in characterizing wide bandgap semiconductors; determining photoionization in MOS, Schottky barriers, and p-n junctions; and for identifying inhomogeneities are examined, as well as the compensation of indium phosphide.

Gatos, H. C.↗
DOE OSTI2023

Exploring and Embracing Heterogeneity in Atomically Thin Energy Materials

Atomically thin semiconductors offer extraordinary opportunities for the manipulation of charge carriers, many-body optical excitations, quantum light emitters, and non-charge based quantum numbers. Confinement and reduced dielectric screening in these two-dimensional (2D) materials give rise to large characteristic energies so that many-body and quantum effects are important even at room temperature. Optical excitations in extended homogeneous areas have been investigated intensely, albeit mostly focusing on a limited set of materials, particularly transition metal dichalcogenides. Much less understood are light-matter interactions for other classes of 2D semiconductors, as well as effects that arise in heterogeneous materials, either near naturally occurring defects, impurities, edges and grain boundaries, or as a result of intentional interface formation in heterostructures. Addressing such systems experimentally involves significant challenges: Understanding the atomistic growth mechanisms of 2D semiconductors, so that novel systems with designed properties, specific ‘imperfections’, or controlled interfaces can be realized; and probing of local excitations at scales that match the relevant (micrometer to nanometer) length scales in heterogeneous materials. In this research project, we addressed these challenges by harnessing quantitative in-situ microscopy to study the growth of 2D and layered semiconductors and heterostructures, combined with local spectroscopic measurements of quasiparticles excited at the nanometer scale. An integral part of the research has been the development of novel experimental approaches, both for in-situ microscopy of synthesis and for nanometer-scale spectroscopy. In particular, advanced techniques were developed for cathodoluminescence in scanning transmission electron microscopy (STEM-CL) where a nanometer-focused electron beam is used to locally excite electron-hole pairs, excitons, as well as propagating hybrid light-matter modes such as exciton-polaritons. Experiments were guided and analyzed via computations of structure, chemistry, and excitation spectra. The particular materials focus has been on group IV chalcogenides, a family of less explored 2D/layered semiconductors whose diversity in crystal structure and properties promises access to novel materials architectures and the discovery of phenomena that can support emerging technology needs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Pick-and-Place Transfer of Arbitrary-Metal Electrodes for van der Waals Device Fabrication

Van der Waals electrode integration is a promising strategy to create nearly perfect interfaces between metals and 2D materials, with advantages such as eliminating Fermi-level pinning and reducing contact resistance. However, the lack of a simple, generalizable pick-and-place transfer technology has greatly hampered the wide use of this technique. Here, we demonstrate the pick-and-place transfer of prefabricated electrodes from reusable polished hydrogenated diamond substrates without the use of any sacrificial layers due to the inherent low-energy and dangling-bond-free nature of the hydrogenated diamond surface. The technique enables transfer of arbitrary-metal electrodes and an electrode array, as demonstrated by successful transfer of eight different elemental metals with work functions ranging from 4.22 to 5.65 eV. We also demonstrate the electrode array transfer for large-scale device fabrication. The mechanical transfer of metal electrodes from diamond to van der Waals materials creates atomically smooth interfaces with no interstitial impurities or disorder, as observed with cross-section high-resolution transmission electron microscopy and energy-dispersive X-ray spectroscopy. As a demonstration of its device application, we use the diamond transfer technique to create metal contacts to monolayer transition metal dichalcogenide semiconductors with high-work-function Pd, low-work-function Ti, and semimetal Bi to create n- and p-type field-effect transistors with low Schottky barrier heights. We also extend this technology to air-sensitive materials (trilayer 1T’ WTe 2 ) and other applications such as ambipolar transistors, Schottky diodes, and optoelectronics. This highly reliable and reproducible technology paves the way for new device architectures and high-performance devices.

2D materials↗
DOE OSTI2025

Dominant end-tunneling effect in two distinct Luttinger liquids coexisting in one quantum wire

Luttinger liquids occupy a notable place in physics as one of the most understood classes of quantum many-body systems. The experimental mission of measuring its main prediction, power laws in observable quantities, has already produced a body of exponents in different semiconductor and metallic structures. Here, we combine tunneling spectroscopy with density-dependent transport measurements in the same quantum wires over more than two orders of magnitude in temperature to very low electron temperatures down to ∼40 mK. This reveals that, when the second 1D subband becomes populated, the temperature dependence splits into two ranges with different exponents in the power-law dependence of the conductance, both dominated by the finite-size effect of the end-tunneling process. This result demonstrates the importance of measuring the Luttinger parameters as well as the number of modes independently through spectroscopy in addition to the transport exponent in the characterization of Luttinger liquids. This opens a pathway to unambiguous interpretation of the exponents observed in quantum wires.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Integration of layered group IV selenides: From SnSe–SnSe 2-x S x core-shell crystals to complex (SnSe–SnSe 2-x S x )-GeSe van der waals heterostructures

The layered semiconductor tin selenide (SnSe) has received extensive interest due to its promising thermoelectric and ferroelectric properties. Integrating SnSe with other layered crystals in heterostructures can enable the modification of charge- and thermal transport, electrical polarization, and other properties such as chemical stability, optoelectronics, and photonics. Here, we demonstrate the vapor transport synthesis of single-crystalline SnSe monochalcogenide flakes that are spontaneously encapsulated in a thin layered SnSe 2-x S x dichalcogenide shell. In a second growth step, such SnSe-SnSe 2-x S x heterostructures are integrated with the monochalcogenide GeSe, which is laterally stitched to the SnSe side facets while preserving the dichalcogenide shell across the basal facets. This architecture is confirmed by optical microscopy, electron microscopy and diffraction, energy dispersive X-ray and Raman spectroscopies, as well as cathodoluminescence spectroscopy. Furthermore, the results extend our capabilities for materials integration by forming complex heterostructures with both vertical van der Waals interfaces and covalent lateral interfaces between layered semiconductors.

2D layered crystals↗