Search NASA⌕ Search

SEARCH · Search NASA

Results for “sensor model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

LEO Sensor to GEO Sensor Algorithm Transfer Models for Land Surface Temperature

Land surface temperature (LST) is a key climate observable used to detect changes in the Earth’s surface energy budget that influence carbon and water cycles. Land surface temperature exhibits strong diurnal variability, which geostationary satellites can observe at scale thanks to their temporal resolution. Due to anthropogenic climate and land use changes, the surface energy balance has been considerably modified and may be described by changes in diurnal temperature range and extremes. Using high performance computing and datasets from the NASA Earth Exchange, we exploit co-located, co-temporal observations from low-earth orbit (LEO) and geostationary (GEO) sensors to develop a deep learning-based method for LEO-to-GEO algorithm emulation. Our model is trained to predict MODIS Terra LST from GOES-16 thermal bands and achieves validation error <2K. Application of the model to unseen times of day (observed by MODIS Aqua) and a new GEO sensor (Himawari-8) observing an unseen spatial domain, demonstrate the generalization of the deep learning model across space, time and spectra. Communicating diurnal LST variability observed by geostationary satellites can have impacts in multiple disciplines, from understanding of snow, vegetation and soil dynamics, to recognizing trends in heat events relevant to human health.

Kate Marie Duffy↗
NASA NTRS1998

Method of Forming a Hot Film Sensor System on a Model

A method of forming a hot film sensor directly on a model is provided. A polyimide solution is sprayed onto the model. The model so sprayed is then heated in air. The steps of spraying and heating are repeated until a polyimide film of desired thickness is achieved on the model. The model with the polyimide film thereon is then thoroughly dried in air. One or more hot film sensors and corresponding electrical conducting leads are then applied directly onto the polyimide film.

Tran, Sang Q.↗
NASA NTRS2009

Modeling, Detection, and Disambiguation of Sensor Faults for Aerospace Applications

Sensor faults continue to be a major hurdle for systems health management to reach its full potential. At the same time, few recorded instances of sensor faults exist. It is equally difficult to seed particular sensor faults. Therefore, research is underway to better understand the different fault modes seen in sensors and to model the faults. The fault models can then be used in simulated sensor fault scenarios to ensure that algorithms can distinguish between sensor faults and system faults. The paper illustrates the work with data collected from an electro-mechanical actuator in an aerospace setting, equipped with temperature, vibration, current, and position sensors. The most common sensor faults, such as bias, drift, scaling, and dropout were simulated and injected into the experimental data, with the goal of making these simulations as realistic as feasible. A neural network based classifier was then created and tested on both experimental data and the more challenging randomized data sequences. Additional studies were also conducted to determine sensitivity of detection and disambiguation efficacy to severity of fault conditions.

Balaban, Edward↗
NASA NTRS1981

Model degradation effects on sensor failure detection

This paper discusses the effects of imperfect modeling on the detection and isolation of sensor failures. For systems with non-zero set points, deterministic inputs or non-zero noise biases, the model mismatch appears as a bias on the stochastic innovation process. This bias, if left unaccounted for, would be sufficient to declare a false alarm failure in one or more sensors. A practical design procedure based upon the Generalized Likelihood Ratio (GLR) form uses a finite data window sequential t-test to detect and isolate model mismatch effects and soft sensor failures. Application to an eighth order model of the QCSEE turbofan engine is discussed.

Leininger, G. G.↗
NASA NTRS1993

Active Thermal Isolation For Hot-Film Anemometers

Local heating compensates for conduction of heat from sensors into modules. Two hot-film sensors stacked on wind-tunnel model. Outer sensor detects changes in boundary-layer flow. Inner sensor provides active thermal isolation between outer sensor and model. Thermal boundary condition controlled at response time of detection hot-film sensor, significantly less than response time of internally heated model. Requires less power to maintain outer hot-film sensor at given temperature, enabling system to respond over greater dynamic range before power limits of instrument reached. Stacked sensors bonded to surface of most wind-tunnel models, even to curved surfaces, and removed after completion of experiments.

Martinson, Scott D.↗
NASA NTRS1990

Development of a sensor coordinated kinematic model for neural network controller training

A robotic benchmark problem useful for evaluating alternative neural network controllers is presented. Specifically, it derives two camera models and the kinematic equations of a multiple degree of freedom manipulator whose end effector is under observation. The mapping developed include forward and inverse translations from binocular images to 3-D target position and the inverse kinematics of mapping point positions into manipulator commands in joint space. Implementation is detailed for a three degree of freedom manipulator with one revolute joint at the base and two prismatic joints on the arms. The example is restricted to operate within a unit cube with arm links of 0.6 and 0.4 units respectively. The development is presented in the context of more complex simulations and a logical path for extension of the benchmark to higher degree of freedom manipulators is presented.

Jorgensen, Charles C.↗
NASA NTRS1993

The Enhanced-model Ladar Wind Sensor and Its Application in Planetary Wind Velocity Measurements

For several years we have been developing an optical air-speed sensor that has a clear application as a meteorological wind-speed sensor for the Mars landers. This sensor has been developed for aircraft use to replace the familiar, pressure-based Pitot probe. Our approach utilizes a new concept in the laser-based optical measurement of air velocity (the Enhanced-Mode Ladar), which allows us to make velocity measurements with significantly lower laser power than conventional methods. The application of the Enhanced-Mode Ladar to measuring wind speeds in the martian atmosphere is discussed.

Soreide, D. C.↗
NASA NTRS1997

Wake Vortex Radar System Development: Overview

The objectives of the work are to: (1) Investigate microwave and millimeter wave sensors to locate, track, quantify, and observe the wake vortex hazard; (2) Develop and evaluate system concepts and designs using sensor system models and employing a theoretical reflectivity model for the wake vortex; (3) Test the validity of the theoretical model; (4) Acquire sensor systems and conduct field testing to evaluate; and to (5) Refine a system for field testing as a wake vortex sensor.

Neece, Robert T.↗
NASA NTRSDate not supplied

Air Quality Analysis with Sensors, Satellites, and Models

Poor air quality is a major global public health concern, which is only projected to get worse in coming years. A comprehensive understanding of current and potential future air quality and its key drivers spanning from local to global scales is needed to tackle this important problem. This presentation will outline the sources of information that we use to understand air quality, including ground-based measurements, satellites, and models. After giving an overview of these data sources and outlining their strengths and limitations, we will take a look at how they can be used together to give us a better picture of air quality locally and globally.

Carl Malings↗
NASA NTRSDate not supplied

Air Quality Data Fusion with Sensors, Satellites, and Models

Global forecasting models, satellite remote sensing, and ground-based regulatory and low-cost monitors all have strengths and weaknesses with respect to providing locally relevant information about air quality. This presentation will give a brief overview of these data sources and then discuss a method for combining them via data fusion to support near-real-time air quality estimation and forecasting at sub-city scales. The basic idea behind the approach will be summarized, followed by an update on recent developments towards creating an operational system using Google Earth Engine and on quantifying uncertainties related to data fusion outputs.

Carl Malings↗
NASA NTRSDate not supplied

Air Quality Data Fusion with Sensors, Satellites, and Models

Poor air quality is a major global public health concern, which is only projected to get worse in coming years. A comprehensive understanding of current and potential future air quality and its key drivers spanning from local to global scales is needed to tackle this important problem. This presentation will outline the sources of information that we use to understand air quality, including ground-based measurements, satellites, and models. After giving an overview of these data sources and outlining their strengths and limitations, we will take a look at how they can be used together to give us a better picture of air quality locally and globally with data fusion techniques.

Carl Malings↗
NASA NTRSDate not supplied

Fast Machine Learning Lidar Surrogate Simulator: Pristine Clear Sky

The simulations of lidar signals and retrievals rely on a range of optic-physical models, such as radiative transfer models, particle scattering and absorption models, along with the output data from atmospheric physical models. Integrating these different models to represent signals of a lidar system is computationally expensive, and performing backward retrievals can be complex and ambiguous. However, with the advantages of Machine Learning, there is a new potential for building effective lidar signal database linked to corresponding atmospheric profiles. For this project, we are developing a fast pre-trained neural network as the lidar surrogate simulator using simulated data for a CALIPSO-like lidar (355 nm, 532nm, and 1064nm), and a CO2 differential absorption lidar (DIAL) near 1571nm. Specifically, we utilize a long short-term memory (LSTM) model to map the relationships between atmospheric profiles (pressure, temperature, air density and CO2 mixing ratio) and lidar signals. This approach allows us to build machine learning based simulators that can reconstruct lidar signals at specific bands from MERRA reanalysis data, and perform retrievals of atmospheric profiles using lidar signals at various wavelengths. As a first step, the results show the potential of this method to establish a foundational model for sensor signals. This model offers the promise of enabling both accurate predictions and rapid retrievals, providing a more efficient approach to signal processing and analysis.

Shan Zeng↗