Search NASA⌕ Search

SEARCH · Search NASA

Results for “shape estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Using Distributed Fiber-optic Strain Sensing to Estimate Generalized Modal Coordinates from Flight-test Data

Background and Motivation - Problem - Contemporary aircraft carry around structural mass so that the flutter instabilities lie well outside of the operational envelope. - Better methods of measuring the structural state could allow reduction of the extra structural weight - Modal filtering - Standard method in structural analysis - Deformations are a combination of mode shapes - Modal filtering is estimating these modal coordinates from data - Often ordinary least squares methods - Often applied to simpler test articles - Factor Analysis - Analysis method from psychology - Measurements are a combination of small number of unmeasurable variables. - Lessons from factor analysis can be adapted to improve the modal filtering methods

Jeffrey Ouellette↗
NASA NTRSDate not supplied

Using Distributed Fiber-Optic Strain Sensing to Estimate Modal Generalized Modal Coordinates from Flight-Test Data

Background and Motivation - Problem - Contemporary aircraft carry around structural mass so that the flutter instabilities lie well outside of the operational envelope. - Better methods of measuring the structural state could allow reduction of the extra structural weight. - Modal filtering - Standard method in structural analysis - Deformations are a combination of mode shapes - Modal filtering is estimating these modal coordinates from data - Often ordinary least squares methods - Often applied to simpler test articles - Factor Analysis - Classic (in psychology) analysis method - Measurements are a combination of small number of unmeasurable variables - Lessons from this factor can be adapted to improve the modal filtering methods

Jeffrey Ouellette↗
NASA NTRS1983

On-board estimation technology for space station - Current status and future developments.

Design considerations and projected solutions to on-board automated estimation techniques for advanced technology controls on a space station are described, with emphasis on the state estimator. The space station is modelled as a collection of rigid and flexible bodies connected at a finite number of hinges. The systems dynamics are characterized by angular velocities of the base body, gimbal angles, and deflections of the flexible appendages. The state estimator evolution is projected to occur in four generations, with the first being control logic in the Viking and Voyager spacecraft, the second in the Shuttle and Galileo probe, the third being large antennas and the prototype space station, the last, around the year 2000, for the actual space station. Considerations for attitude, ephemeris, shape determination, and position estimation through each generation are discussed.

Rodriguez, G.↗
NASA NTRS2018

Technology Transfer Program [Marshall Space Flight Center (MSFC)]

Contents (in this order, some are repeats, shown on a continuous loop): Shuttle Launch; *Estimated Spectrum Adaptive Postfilter; *Fiber Optic Shape Sensing Technology; *Dyed Liquid; *RFID Smart Dispensers; Life on ISS; *Fiber Optic Shape Sensing; View from ISS; *Advanced Actuators and Transducers; SLS Booster Hot Fire Test; *Estimated Spectrum Adaptive Postfilter; ISS Fly Through; *Fiber Optic Shape Sensing Technology; Solar Flares; *RFID Smart Dispensers; ISS Fly Through; *Fiber Optic Shape Sensing; SLS in 30 Seconds; *Advanced Actuators and Transducers; View from ISS. *Note asterisked items have "Technology Available for Licensing."

Harkey, Ann M.↗
NASA NTRS2012

Airborne Measurements of Atmospheric Pressure made Using an IPDA Lidar Operating in the Oxygen A-Band

We report airborne measurements of atmospheric pressure made using an integrated path differential absorption (IPDA) lidar that operates in the oxygen A-band near 765 nm. Remote measurements of atmospheric temperature and pressure are needed for NASA s Active Sensing of CO2 Emissions Over Nights, Days, and Seasons (ASCENDS) mission to measure atmospheric CO2. Accurate measurements of tropospheric CO2 on a global scale are very important in order to better understand its sources and sinks and to improve our predictions of climate change. The goal of ASCENDS is to determine the CO2 dry mixing ratio with lidar measurements from space at a level of ~1 ppm. Analysis to date shows that with current weather models, measurements of both the CO2 column density and the column density of dry air are needed. Since O2 is a stable molecule that uniformly mixed in the atmosphere, measuring O2 absorption in the atmosphere can be used to infer the dry air density. We have developed an airborne (IPDA) lidar for Oxygen, with support from the NASA ESTO IIP program. Our lidar uses DFB-based seed laser diodes, a pulsed modulator, a fiber laser amplifier, and a non-linear crystal to generate wavelength tunable 765 nm laser pulses with a few uJ/pulse energy. The laser pulse rate is 10 KHz, and average transmitted laser power is ~20 mW. Our lidar steps laser pulses across a selected line O2 doublet near 764.7 nm in the Oxygen A-band. The direct detection lidar receiver uses a 20 cm diameter telescope, a Si APD detector in Geiger mode, and a multi-channel scalar to detect and record the time resolved laser backscatter in 40 separate wavelength channels. Subsequent analysis is used to estimate the transmission line shape of the doublet for the laser pulses reflected from the ground. Ground based data analysis allows averaging from 1 to 60 seconds to increase SNR in the transmission line shape of the doublet. Our retrieval algorithm fits the expected O2 lineshapes against the measurements and determines the atmospheric pressure by minimizing the error between the observations and model. We first demonstrated our airborne lidar during flights during summer 2010. We made several improvements and made measurements during the Ascends flights during July 2011. More information about the technique, lidar instrument, airborne measurements, and pressure estimates will be described in the presentation.

Riris, Haris↗
NASA NTRS2007

Derivation and Application of a Global Albedo yielding an Optical Brightness To Physical Size Transformation Free of Systematic Errors

Orbital object data acquired via optical telescopes can play a crucial role in accurately defining the space environment. Radar systems probe the characteristics of small debris by measuring the reflected electromagnetic energy from an object of the same order of size as the wavelength of the radiation. This signal is affected by electrical conductivity of the bulk of the debris object, as well as its shape and orientation. Optical measurements use reflected solar radiation with wavelengths much smaller than the size of the objects. Just as with radar, the shape and orientation of an object are important, but we only need to consider the surface electrical properties of the debris material (i.e., the surface albedo), not the bulk electromagnetic properties. As a result, these two methods are complementary in that they measure somewhat independent physical properties to estimate the same thing, debris size. Short arc optical observations such as are typical of NASA's Liquid Mirror Telescope (LMT) give enough information to estimate an Assumed Circular Orbit (ACO) and an associated range. This information, combined with the apparent magnitude, can be used to estimate an "absolute" brightness (scaled to a fixed range and phase angle). This absolute magnitude is what is used to estimate debris size. However, the shape and surface albedo effects make the size estimates subject to systematic and random errors, such that it is impossible to ascertain the size of an individual object with any certainty. However, as has been shown with radar debris measurements, that does not preclude the ability to estimate the size distribution of a number of objects statistically. After systematic errors have been eliminated (range errors, phase function assumptions, photometry) there remains a random geometric albedo distribution that relates object size to absolute magnitude. Measurements by the LMT of a subset of tracked debris objects with sizes estimated from their radar cross sections indicate that the random variations in the albedo follow a log-normal distribution quite well. In addition, this distribution appears to be independent of object size over a considerable range in size. Note that this relation appears to hold for debris only, where the shapes and other properties are not primarily the result of human manufacture, but of random processes. With this information in hand, it now becomes possible to estimate the actual size distribution we are sampling from. We have identified two characteristics of the space debris population that make this process tractable and by extension have developed a methodology for performing the transformation.

Mulrooney, Dr. Mark K.↗
NASA NTRS2013

A Hybrid Fiber/Solid-State Regenerative Amplifier with Tunable Pulse Widths for Satellite Laser Ranging

A fiber/solid-state hybrid seeded regenerative amplifier, capable of achieving high output energy with tunable pulse widths, has been developed for satellite laser ranging applications. The regenerative amplifier cavity uses a pair of Nd:YAG zigzag slabs oriented orthogonally to one another in order to make thermal lensing effects symmetrical and simplify optical correction schemes. The seed laser used is a fiber-coupled 1,064-nm narrowband (<0.02 nm) diode laser that is discretely driven in a new short-pulsed mode, enabling continuously tunable seed pulse widths in the 0.2-to-0.4-ns range. The amplifier gain unit consists of a pair of Brewster-cut 6-bounce zigzag Nd:YAG laser slabs, oriented 90deg relative to each other in the amplifier head. This arrangement creates a net-symmetrical thermal lens effect (an opposing singleaxis effect in each slab), and makes thermo-optical corrections simple by optimizing the curvature of the nearest cavity mirror. Each slab is pumped by a single 120-W, pulsed 808-nm laser diode array. In this configuration, the average pump beam distribution in the slabs had a 1-D Gaussian shape, which matches the estimated cavity mode size. A half-wave plate between the slabs reduces losses from Fresnel reflections due to the orthogonal slabs Brewster-cut end faces. Successful "temporal" seeding of the regenerative amplifier cavity results in a cavity Q-switch pulse envelope segmenting into shorter pulses, each having the width of the input seed, and having a uniform temporal separation corresponding to the cavity round-trip time of approx. =10 ns. The pulse energy is allowed to build on successive passes in the regenerative amplifier cavity until a maximum is reached, (when cavity gains and losses are equal), after which the pulse is electro- optically switched out on the next round trip The overall gain of the amplifier is approx. =82 dB (or a factor of 1.26 million). After directing the amplified output through a LBO frequency doubling crystal, approx. = 2.1 W of 532-nm output (>1 mJ) was measured. This corresponds to a nonlinear conversion efficiency of >60%. Furthermore, by pulse pumping this system, a single pulse per laser shot can be created for the SLR (satellite laser ranging) measurement, and this can be ejected into the instrument. This is operated at the precise frequency needed by the measurement, as opposed to commercial short-pulsed, mode-locked systems that need to operate in a continuous fashion, or CW (continuous wave), and create pulses at many MHz. Therefore, this design does not need to throw away or dump 99% of the laser energy to produce what is required; this system can be far smaller, more efficient, cheaper, and readily deployed in the field when packaged efficiently. Finally, by producing custom diode seed pulses electronically, two major advantages over commercial systems are realized: First, this pulse shape is customizable and not affected by the cavity length or gain of the amplifier cavity, and second, it can produce adjustable (selectable) pulse widths by simply adding multiple seed diodes and coupling each into commercial, low-cost fiber-optic combiners.

Coyle, Barry↗
NASA NTRS2005

Asteroid Shape Reconstruction From Radar Observations

I estimate near-Earth asteroid 1992 SK's physical properties from radar delay-Doppler images, Doppler-only echo spectra and optical lightcurves. The images are not very strong, but place up to 20 (40 m by 160 m) pixels on the asteroid. The radar tracks are confined to subradar latitudes between 20 and 40 degrees but have complete rotational phase coverage. The echo spectra and optical lightcurves span approx.80 degrees of sky motion, providing geometric leverage to constrain the pole direction. The optical lightcurves are essential to accurate determination of the asteroid's shape and spin state. The asteroid is approx.1.4 km in maximum extent and mildly asymmetric, with an elongation of approx.1.5 and relatively subdued topography. The radar albedo is about 0.13 and the optical albedo about 0.3. The circular polarization ratio for the object is about 0.34, implying typical cm-scale surface roughness. I estimate the asteroid's period to be 7.3182+/-0.0003 hours and its pole direction as (99deg+/-5deg,-3deg+/-5deg) in ecliptic coordinates. The radar-refined orbital solution accurately predicts planetary close approaches between the years 826 and 2690. I have used my model to predict salient characteristics of radar images and optical lightcurves obtainable during the asteroid's March 2006 approach.

Busch, Michael J.↗
NASA NTRS1974

Correlation of Kp with the substorm-injected plasma boundary

The local time position of the low-energy substorm-injected plasma boundary in the dusk to midnight region of the magnetosphere as observed by the geostationary satellite ATS 5 is found to be correlated with the interpolated Kp index. Considering the time resolution of Kp, the correlation is found to be quite close but dependent on season. An estimate of the overall shape and position of the low-energy boundary within this region of the magnetosphere as a function of Kp is found by using a fit to the authors' winter data correlation in conjunction with a fit of data presented by Carpenter (1967) concerning the Kp-related radial positioning of the plasmapause boundary in the postmidnight region. This analysis results in a spiral structure, the scale of which depends on Kp.

Mauk, B. H.↗
NASA NTRS1974

The design, analysis and experimental evaluation of an elastic model wing

An elastic orbiter model was developed to evaluate the effectiveness of aeroelasticity computer programs. The elasticity properties were introduced by constructing beam-like straight wings for the wind tunnel model. A standard influence coefficient mathematical model was used to estimate aeroelastic effects analytically. In general good agreement was obtained between the empirical and analytical estimates of the deformed shape. However, in the static aeroelasticity case, it was found that the physical wing exhibited less bending and more twist than was predicted by theory.

Cavin, R. K., III↗
NASA NTRS1977

Absolute value optimization to estimate phase properties of stochastic time series

Most existing deconvolution techniques are incapable of determining phase properties of wavelets from time series data; to assure a unique solution, minimum phase is usually assumed. It is demonstrated, for moving average processes of order one, that deconvolution filtering using the absolute value norm provides an estimate of the wavelet shape that has the correct phase character when the random driving process is nonnormal. Numerical tests show that this result probably applies to more general processes.

Scargle, J. D.↗
NASA NTRS1978

Interpretation of scanning electron microscope measurements of minority carrier diffusion lengths in semiconductors

In scanning electron microscope (SEM) injection measurements of minority carrier diffusion lengths some uncertainties of interpretation exist when the response current is nonlinear with distance. This is significant in epitaxial layers where the layer thickness is not large in relation to the diffusion length, and where there are large surface recombination velocities on the incident and contact surfaces. An image method of analysis is presented for such specimens. A method of using the results to correct the observed response in a simple convenient way is presented. The technique is illustrated with reference to measurements in epitaxial layers of GaAs. Average beam penetration depth may also be estimated from the curve shape.

Flat, A.↗
NASA NTRS1982

Estimation of distributed parameter systems

The estimation and control of large flexible space structures pose significant new control technology problems. One major problem area is the closed-loop stability of a structure that has been modeled with truncated modal dynamics. Stability problems arise due to the control design process beginning with a deficient model. This work provides the necessary conditions for the optimal estimation of infinite dimensional (partial-differential equation) systems. This approach can be particularly useful for initial control studies and for gaining considerable insight into what the optimal estimator for a truly infinite dimensional system should be. A detailed example of the estimation of the continuous shape of a string in tension is presented.

Schaechter, D. B.↗
NASA NTRS1984

Estimation of discontinuous coefficients in parabolic systems: Applications to reservoir simulation

Spline based techniques for estimating spatially varying parameters that appear in parabolic distributed systems (typical of those found in reservoir simulation problems) are presented. The problem of determining discontinuous coefficients, estimating both the functional shape and points of discontinuity for such parameters is discussed. Convergence results and a summary of numerical performance of the resulting algorithms are given.

Lamm, P. D.↗
NASA NTRS1985

The wind-disk interaction in X-ray burst sources

The interaction between a radiatively driven wind from the surface of a neutron star and an accretion disk surrounding the star is considered. A bow shock forms if the wind is supersonic when it reaches the inner edge of the disk. The resultant heating of the wind material can enhance the X-ray luminosity of the source, but this effect is important only if the wind is very strong. If the terminal velocity of the wind is at least about 0.99c and the integrated kinetic energy flux of the wind is at least about 30 times the Eddington limit, then super-Eddington X-ray luminosities will be generated. The conditions that are required for the formation of such a wind are briefly discussed. Also developed are estimates for the spectral shape, color temperature, and X-ray luminosity resulting from the wind-disk interaction, and it is shown that these results are consistent with the observed properties of type I cosmic X-ray bursts.

Melia, F.↗
NASA NTRS1987

Estimation of discontinuous coefficients in parabolic systems - Applications to reservoir simulation

Spline-based techniques for estimating spatially varying parameters that appear in parabolic distributed systems (typical of those found in reservoir simulation problems) are presented. In particular, the problem of determining discontinuous coefficients is discussed, estimating both the functional shape and points of discontinuity for such parameters. In addition, the ideas may also be applied to problems with unknown initial conditions and unknown parameters appearing in terms representing external forces. Convergence results and a summary of numerical performance of the resulting algorithms are given.

Lamm, Patricia K.↗
NASA NTRS1988

Relaxation of impact basins on icy satellites

The problem of relaxation of very large impact craters on icy satellites is addressed and the extent to which such studies can help place constraints on the nature of such satellite interiors is investigated. Very general calculations aimed at understanding the nature of relaxation of large impact structures, including the directions, relaxation velocities, and stress levels, are presented. The dependence of relaxation on such factors as silicate core size and viscosity gradients in the ice is examined. The general results are used to address whether comparing the current morphology of impact basins to estimates of their original shape will yield an understanding of the thermal and mechanical structure of the interiors of the icy satellites. It is found that the relaxation rates derived from models of satellite interiors can provide constraints on viscous layer thicknesses. High thermal gradients can permit substantial relaxation even in thin viscous layers. Finally, the constraints on the internal structure of Tethys arising from the extremely relaxed state of the Odysseus basin and the existence of Ithaca Chasma are discussed.

Thomas, Paul J.↗
NASA NTRS1989

Photoelectric observations of asteroids 3, 24, 60, 261, and 863

Observations of the five asteroids designated 3 Juno, 24 Themis, 60 Echo, 261 Prymo, and 863 Benkoela over the 1978-1984 period have been subjected to Fourier analysis to obtain composite lightcurves. The method yields a rotation-period value, mean absolute magnitudes for each night of observation, and Fourier coefficients that define composite-lightcurve shape, with formal error estimates for all quantities. The first three of the asteroids listed exhibit significant variation in surface albedo.

Harris, A. W.↗