Search NASA⌕ Search

SEARCH · Search NASA

Results for “shuttling effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Data-Driven Simulation-Based Planning for Electric Airport Shuttle Systems: A Real-World Case Study

Many airports are adopting battery electric buses in their shuttle fleets due to concerns over air quality and regulations. This study proposes a simulation-based optimization modeling framework to help airport shuttle operators effectively deploy electric buses. We evaluated a planned airport electric shuttle system with an event-driven simulator. Empirical data collected from existing systems were used to drive the simulations. We then proposed a simulation-based optimization model to determine the battery capacity, charging power, and number of chargers so that predefined objective(s) (e.g., minimizing total capital cost, minimizing emissions) are optimized. Compared to existing studies, the primary contribution of the proposed method is that it can model the real-world stochastic nature of operations in an electric bus system with much higher fidelity. To demonstrate the proposed modeling framework, we study a real-world shuttle system at the Dallas-Fort Worth International Airport, and present extensive numerical studies. When considering partial fleet electrification, the model can provide a set of Pareto optimal solutions. When considering full fleet electrification, the optimal solution requires a 50-kWh battery capacity and four 210-kW chargers, resulting in a total capital cost of $26,744,000. The results demonstrate that the proposed modeling framework can effectively optimize the planning of electric airport shuttle systems with partial or full fleet electrification.

ADVANCED PROPULSION SYSTEMS,ENERGY PLANNING, POLIC↗
NASA NTRS1973

The effect of nose geometry on the aerothermodynamic environment of shuttle entry configurations

The effect was studied of nose geometry on the transition criteria for the windward boundary layer, on the extent of separation, on the heat transfer perturbation due to the canopy, and on the surface pressure and the heat transfer in the separated region. The data for each of these problems is analyzed. A literature review that concentrates on separation and the leeward flow-field is presented.

Bertin, J. J.↗
NASA NTRS1972

Aerodynamic static stability and control effectiveness of a parametric shuttle launch configuration

Experimental aerodynamic investigations were conducted in the NASA/MSFC 14-inch Trisonic Wind Tunnel on a 0.004-scale model of the NR ATP baseline Shuttle launch configuration. The test model consisted of the NR ATP baseline orbiter, external tank, and SRB's with nozzles. Six component aerodynamic force and moment data were recorded over an angle of attack range from minus 10 deg to 10 deg at zero degrees sideslip and angle of sideslip range of minus 10 deg to 10 deg at zero angle of attack for a Mach range of 0.6 to 4.96. Rudder flare was constant at 10 deg during the entire test. The purpose of the test was to define the performance, stability, and control characteristics of the launch configuration as well as to investigate the buildup effect of two geometrical parameters.

Ramsey, P. E.↗
DOE OSTI2025

Effects of soluble electron shuttles on microbial iron reduction and methanogenesis

In many aquatic and terrestrial ecosystems, iron (Fe) reduction by microorganisms is a key part of biogeochemical cycling and energy flux. The presence of redox-active electron shuttles in the environment potentially enables a phylogenetically diverse group of microbes to use insoluble iron as a terminal electron acceptor. We investigated the impact that different electron shuttles had on respiration, microbial physiology, and microbial ecology. We tested eight different electron shuttles, seven quinones and riboflavin, with redox potentials between 0.217 and −0.340 V. Fe(III) reduction coupled with acetate oxidation was observed with all shuttles. Once Fe(III) reduction began to plateau, a rapid increase in acetate consumption was observed and coincided with the onset of methane production, except in the incubations with the shuttle 9,10-anthraquinone-2-carboxylic acid (AQC). The rates of iron reduction, acetate consumption, methanogenesis, and the microbial communities varied significantly across the different shuttles independent of redox potential. In general, shuttles appeared to reduce the overall diversity of the community compared to no shuttle controls, but certain shuttles were exceptions to this trend. Geobacteraceae were the predominant taxonomic family in all enrichments except in the presence of AQC or 1,2-dihydroxyanthraquinone (AQZ), but each shuttle enriched a unique community significantly different from the no shuttle control conditions. This suggests that the presence of different redox-active electron shuttles can have a large influence on the microbial ecology and total carbon flux in the environment.

Anaerobic Redox Reactions↗
NASA NTRS1972

Space shuttle: Stability and control effectiveness at high and low angles of attack and effects of variations in engine shround, fin, and drag petal configurations for the Boeing 0.008899-scale pressure-fed ballistic recoverable booster, model 979-160

Experimental aerodynamic investigations were carried out in the Boeing transonic and supersonic wind tunnels on a 0.008899-scale model of a proposed pressure-fed ballistic recoverable booster (BRB) configuration. The purpose of the test program was to determine the stability and control effectiveness of the basic configuration at high and low angles of attack, and to conduct parametric studies of various engine shroud, fin, and drag petal configurations. Six-component force data and base pressure data were obtained over a Mach number range of 0.35 to 4.0 at angles of attack of -5 to 25 and 55 to 85 at zero degrees sideslip and over a sideslip range of -10 to +10 at angles of attack ranging from -10 to 72.5. Two-component force data were also obtained with a fin balance on selected runs.

Hanson, R. L.↗
NASA NTRS1973

Unsteady aerodynamic analysis of space shuttle vehicles. Part 4: Effect of control deflections on orbiter unsteady aerodynamics

The unsteady aerodynamics of the 040A orbiter have been explored experimentally. The results substantiate earlier predictions of the unsteady flow boundaries for a 60 deg swept delta wing at zero yaw and with no controls deflected. The test revealed a previously unknown region of discontinuous yaw characteristics at transonic speeds. Oilflow results indicate that this is the result of a coupling between wing and fuselage flows via the separated region forward of the deflected elevon. In fact, the large leeward elevon deflections are shown to produce a multitude of nonlinear stability effects which sometimes involve hysteresis. Predictions of the unsteady flow boundaries are made for the current orbiter. They should carry a good degree of confidence due to the present substantiation of previous predictions for the 040A. It is proposed that the present experiments be extended to the current configuration to define control-induced effects. Every effort should be made to account for Reynolds number, roughness, and possible hot-wall effects on any future experiments.

Reding, J. P.↗
NASA NTRS1974

Atmospheric effects on the Space Shuttle approach and landing

The present work describes piloted simulations of Space Shuttle approach and landing where the pilot either flies the aircraft or monitors a computer-controlled flight with the option to take control. The simulated runs encompassed approach to the airport, acquisition of the glide slope and localizer, and accomplishing final flare and touchdown. The degree of difficulty associated with the flight task was imposed through modeled atmospheric winds and superimposed atmospheric turbulence. The simulator models the Orbiter vehicle with the aid of an all-digital computer complex and a fixed-base crew station. Comparison between piloted and computer-controlled responses to unexpected atmospheric conditions was obtained by recording data from instrument displays available to the pilot.

Ragsdale, W. A.↗
NASA NTRS1986

The effect of temperature on Shuttle glow

The glow on ram surfaces of the Space Shuttle has been reported from a series of photographic observations made during several orbiter missions. These measurements have shown that the spectrum of the glow is a continuum, has a spectral peak at 680 nm, and the brightness decreases with altitude. The spectrum has been tentatively identified as the nitrogen dioxide continuum and follows the interaction of adsorbed nitric oxide with ramming atmospheric oxygen. In this paper the variation of the glow brightness among several different Shuttle flights is reexamined and it is shown that a major contributing factor to glow brightness is probably the temperature of the rammed surface. The derived temperature dependence is also consistent with the Atmospheric Explorer-C satellite 'red' glow intensity data.

Swenson, G. R.↗
NASA NTRS1990

Effectiveness of the Space Shuttle anti-exposure system in a cold water environment

The purpose of this study was to evaluate the NASA Space Shuttle launch entry suit (LES) and raft for 24 h of protection against cold water immersion. Two configurations, the LES and the LES with raft (LES/r) were evaluated for antiexposure protection. Conditions were selected to simulate worst-case water and air temperatures along projected Space Shuttle ground tracks; i.e., water temperatures = 4.4 C, air temperature = 5.6 C, 1-foot waves (chop), and constant spray. Four males 31-44 years of age and one 32-year-old female were studied once in each configuration. Trials with and without a raft were scheduled for up to 24 and 6 h, respectively. Mean LES trial durations were 150 + or - 9 min and final rectal temperature (FRT) = 36.5 + or - 0.3 C. Mean LES/r trial durations were 398 + or - 126 min and FRT = 35.6 + or - 0.4 C. LES and LES/r trials were terminated for reaching FRT = 35.0 C or subject-requested termination due to discomfort. The longest LES and LES/r trials were terminated due to subject discomfort. Although not achieving the desired durations, the LES and LES/r did prove capable of protecting individuals, respectively, for up to 3 and 13.5 h. Since the longest runs were terminated due to subjective tolerance, actual survival times greater than 3 and 13.5 h could be expected.

Bagian, James P.↗
NASA NTRS1991

Analysis of launch site processing effectiveness for the Space Shuttle 26R payload

A trend analysis study has been performed on problem reports recorded during the Space Shuttle 26R payload's processing cycle at NASA-Kennedy, using the defect-flow analysis (DFA) methodology; DFA gives attention to the characteristics of the problem-report 'population' as a whole. It is established that the problem reports contain data which distract from pressing problems, and that fully 60 percent of such reports were caused during processing at NASA-Kennedy. The second major cause of problem reports was design defects.

Flores, Carlos A.↗
NASA NTRS1993

Cost-effective test methods for Shuttle payloads

Techniques are discussed for deriving constrained vibration mode shapes for Space Shuttle payloads using unconstrained or free-boundary dynamic properties. Application of the residual flexibility method requires measurement of a set of free-boundary modes plus the residual flexibility of the payload-to-orbiter interfaces. The mass-additive approach involves the measurement of unconstrained modes and frequencies of a payload with large masses attached to the interfaces. In either case, the orbiter interfaces of the test-verified payload model are analytically constrained to provide the mode shapes for the Shuttle-constrained configuration. Use of these methods or a hybrid combination of them for structures to which they are applicable allows the difficult and expense associated with development and verification of fixed-base test fixtures to be avoided.

Tinker, Michael L.↗
NASA NTRS1993

Cost-effective test methods for Shuttle payloads

Techniques are discussed for deriving constrained vibration mode shapes for space shuttle payloads using unconstrained or free-boundary dynamic properties. Application of the residual flexibility method requires measurement of a set of free boundary modes plus the residual flexibility of the payload-to-orbiter interfaces. The mass-additive approach involves the measurement of unconstrained modes and frequencies of a payload with large masses attached to the interfaces. In either case, the orbiter interfaces of the test-verified payload model are analytically constrained to provide the mode shapes for the shuttle-constrained configuration. Use of these methods or a hybrid combination of them for structures to which they are applicable allows the difficulty and expense associated with development and verification of fixed-base test fixtures to be avoided.

Tinker, Michael L.↗
NASA NTRS1993

Attitude Determination by Using Horizon and Sun Sensors

The Pointing and Alignment Workstation (PAWS) developed by Teledyne Brown Engineering (TBE) has successfully supported the first and second Atmospheric Laboratory for Applications and Science (ATLAS 1, 2) spacelab missions for NASA. The primary PAWS objective was to provide realtime pointing information to instruments whose line of-sight is dependent on Shuttle attitude and to study/quantify the causes and effects of Shuttle and payload pointing errors. In addition to Shuttle IMU attitude information, PAWS used atmospheric science sensors data to determine the spacecraft attitude. PAWS successfully achieved these goals by acquiring and processing data during the ATLAS 1, 2 mission. This paper presents the attitude determination algorithm real time processing, and results of post mission analysis. The findings of this study include the quality of the horizon sensor and IMU measurements as well as accuracy of attitude processor algorithm.

Huang, Allen K. H.↗
NASA NTRS1972

Space shuttle: Directional and lateral stability and interference effects of cruise engine location on a 0.015 scale space shuttle

The results are presented that were obtained from a wind tunnel tests to improve space shuttle booster baseline lateral-directional stability, control characteristics, and cruise engine location optimization. Tests were conducted in a 7 x 10-foot transonic wind tunnel. The model employed was a 0.015-scale replica of a space shuttle booster. The three major objectives of this test were to determine the following: (1) force, static stability, and control effectiveness characteristics for varying angles of positive and negative wing dihedral and various combinations of wing tip and centerline dorsal fins; (2) force and static stability characteristics of cruise engines location on the body below the high aerodynamic canard; and (3) control effectiveness for the low-mounted wing configuration. The wing dihedral study was conducted at a cruise Mach number of 0.40 and simulated altitude of 10,000 feet. Portions of the test were conducted to determine the control surfaces stability and control characteristics over the Mach number range of 0.4 to 1.2. The aerodynamic characteristics determined are based on a unit Reynolds number of approximately 2 million per foot. Boundary layer trip strips were employed to induce boundary layer transition.

Buchholz, R. E.↗