Search NASA⌕ Search

SEARCH · Search NASA

Results for “signal integrity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Conversion-Integration of MSFC Nonlinear Signal Diagnostic Analysis Algorithms for Realtime Execution of MSFC's MPP Prototype System

NASA's advanced propulsion system Small Scale Magnetic Disturbances/Advanced Technology Development (SSME/ATD) has been undergoing extensive flight certification and developmental testing, which involves large numbers of health monitoring measurements. To enhance engine safety and reliability, detailed analysis and evaluation of the measurement signals are mandatory to assess its dynamic characteristics and operational condition. Efficient and reliable signal detection techniques will reduce the risk of catastrophic system failures and expedite the evaluation of both flight and ground test data, and thereby reduce launch turn-around time. During the development of SSME, ASRI participated in the research and development of several advanced non- linear signal diagnostic methods for health monitoring and failure prediction in turbomachinery components. However, due to the intensive computational requirement associated with such advanced analysis tasks, current SSME dynamic data analysis and diagnostic evaluation is performed off-line following flight or ground test with a typical diagnostic turnaround time of one to two days. The objective of MSFC's MPP Prototype System is to eliminate such 'diagnostic lag time' by achieving signal processing and analysis in real-time. Such an on-line diagnostic system can provide sufficient lead time to initiate corrective action and also to enable efficient scheduling of inspection, maintenance and repair activities. The major objective of this project was to convert and implement a number of advanced nonlinear diagnostic DSP algorithms in a format consistent with that required for integration into the Vanderbilt Multigraph Architecture (MGA) Model Based Programming environment. This effort will allow the real-time execution of these algorithms using the MSFC MPP Prototype System. ASRI has completed the software conversion and integration of a sequence of nonlinear signal analysis techniques specified in the SOW for real-time execution on MSFC's MPP Prototype. This report documents and summarizes the results of the contract tasks; provides the complete computer source code; including all FORTRAN/C Utilities; and all other utilities/supporting software libraries that are required for operation.

Jong, Jen-Yi↗
NASA NTRS1983

A note on the use of coherent integration in periodogram analysis of MST radar signals

The effect of coherent integration on the periodogram method to estimate the power spectra of MST radar signals is examined. The spectrum estimate usually is biased, even when care is taken to reduce the aliasing effects. Due to this bias, the signal power for Doppler shifted signals is underestimated by as much as 4 dB. The use of coherent integration in reducing the effect of aliased power line harmonics is pointed out.

Rastogi, P. K.↗
NASA NTRS1996

Accelerometer Method and Apparatus for Integral Display and Control Functions

Method and apparatus for detecting mechanical vibrations and outputting a signal in response thereto. Art accelerometer package having integral display and control functions is suitable for mounting upon the machinery to be monitored. Display circuitry provides signals to a bar graph display which may be used to monitor machine conditions over a period of time. Control switches may be set which correspond to elements in the bar graph to provide an alert if vibration signals increase in amplitude over a selected trip point. The circuitry is shock mounted within the accelerometer housing. The method provides for outputting a broadband analog accelerometer signal, integrating this signal to produce a velocity signal, integrating and calibrating the velocity signal before application to a display driver, and selecting a trip point at which a digitally compatible output signal is generated.

Bozeman, Richard J., Jr.↗
NASA NTRS1973

Lightning tracking system

A system is described for locating lightning strikes by developing the coordinates of a pair of lines, each of which is produced at a reference sensing station. At each station there are a pair of directional antennas which produce analog signals responsive to a lightning stroke. These analog signals are fed to a pair of integrators which integrate the signals for a predetermined period of time so as to produce the X and Y coordinate of a particular line. The analog signals are also fed through a square rooter, a Schmitt trigger circuit, and flip-flops to produce pulses for starting and stopping the integrators. The system at the remote station is similar to that at the central station and is tied to the circuitry at the central station through logic circuits to minimize the chance of error from spurious signals. Computers, printers, and plotters are utilized to plot the exact location of the lightning stroke.

Wojtasinski, R. J.↗
NASA NTRS2002

Solid state 31phosphorus nuclear magnetic resonance of iron-, manganese-, and copper-containing synthetic hydroxyapatites

The incorporation of micronutrients into synthetic hydroxyapatite (SHA) is proposed for slow release of these nutrients to crops in the National Aeronautics and Space Administration's (NASA's) Advanced Life Support (ALS) program for Lunar or Martian outposts. Solid state 31P nuclear magnetic resonance (NMR) was utilized to examine the paramagnetic effects of Fe3+, Mn2+, and Cu2+ to determine if they were incorporated into the SHA structure. Separate Fe3+, Mn2+, and Cu2+ containing SHA materials along with a transition metal free SHA (pure-SHA) were synthesized using a precipitation method. The proximity (<1 nm) of the transition metals to the 31P nuclei of SHA were apparent when comparing the integrated 31P signal intensities of the pure-SHA (87 arbitrary units g-1) with the Fe-, Mn-, and Cu-SHA materials (37-71 arbitrary units g-1). The lower integrated 31P signal intensities of the Fe-, Mn-, and Cu-SHA materials relative to the pure-SHA suggested that Fe3+, Mn2+, and Cu2+ were incorporated in the SHA structure. Further support for Fe3+, Mn2+, and Cu2+ incorporation was demonstrated by the reduced spin-lattice relaxation constants of the Fe-, Mn-, and Cu-SHA materials (T'=0.075-0.434s) relative to pure-SHA (T1=58.4s). Inversion recovery spectra indicated that Fe3+, Mn2+, and Cu2+ were not homogeneously distributed about the 31P nuclei in the SHA structure. Extraction with diethylene-triamine-penta-acetic acid (DTPA) suggested that between 50 and 80% of the total starting metal concentrations were incorporated in the SHA structure. Iron-, Mn-, and Cu-containing SHA are potential slow release sources of Fe, Mn, and Cu in the ALS cropping system.

NASA Discipline Life Support Systems↗
NASA NTRS2000

Postural control model interpretation of stabilogram diffusion analysis

Collins and De Luca [Collins JJ. De Luca CJ (1993) Exp Brain Res 95: 308-318] introduced a new method known as stabilogram diffusion analysis that provides a quantitative statistical measure of the apparently random variations of center-of-pressure (COP) trajectories recorded during quiet upright stance in humans. This analysis generates a stabilogram diffusion function (SDF) that summarizes the mean square COP displacement as a function of the time interval between COP comparisons. SDFs have a characteristic two-part form that suggests the presence of two different control regimes: a short-term open-loop control behavior and a longer-term closed-loop behavior. This paper demonstrates that a very simple closed-loop control model of upright stance can generate realistic SDFs. The model consists of an inverted pendulum body with torque applied at the ankle joint. This torque includes a random disturbance torque and a control torque. The control torque is a function of the deviation (error signal) between the desired upright body position and the actual body position, and is generated in proportion to the error signal, the derivative of the error signal, and the integral of the error signal [i.e. a proportional, integral and derivative (PID) neural controller]. The control torque is applied with a time delay representing conduction, processing, and muscle activation delays. Variations in the PID parameters and the time delay generate variations in SDFs that mimic real experimental SDFs. This model analysis allows one to interpret experimentally observed changes in SDFs in terms of variations in neural controller and time delay parameters rather than in terms of open-loop versus closed-loop behavior.

NASA Program Biomedical Research and Countermeasur↗
NASA NTRS1998

Accelerometer Method and Apparatus for Integral Display and Control Functions

Method and apparatus for detecting mechanical vibrations and outputting a signal in response thereto is discussed. An accelerometer package having integral display and control functions is suitable for mounting upon the machinery to be monitored. Display circuitry provides signals to a bar graph display which may be used to monitor machine conditions over a period of time. Control switches may be set which correspond to elements in the bar graph to provide an alert if vibration signals increase in amplitude over a selected trip point. The circuitry is shock mounted within the accelerometer housing. The method provides for outputting a broadband analog accelerometer signal, integrating this signal to produce a velocity signal, integrating and calibrating the velocity signal before application to a display driver, and selecting a trip point at which a digitally compatible output signal is generated.

Bozeman, Richard J., Jr.↗
DOE OSTI2021

A custom high-stability pulse generator for the test of a novel in-situ magnetic sensor developed to detect radiation damage in undulators

High-performance analog-to-digital converters (ADC) have been widely applied in many areas of science. For instance, magnetic field measurements based on the Faraday’s induction law require high-precision voltmeters to measure induced voltages. In this study in the context of free-electron lasers technology, the Magnetic Measurements Team at SLAC National Accelerator Laboratory proposed a novel in-situ radiation damage detection system (RDDS) for detecting small field variations in undulators. The system measures the flux change in a flexible printed-circuit coil attached to the magnet array during the undulator gap movement. The gap movement changes the magnetic field, which induces a voltage signal in the coil that is measured and integrated with an ADC. Although the system is capable of detecting relative flux changes better than 100 ppm, drift in the ADC’s gain or offset can cause apparent changes in the relative flux. This paper describes the first attempt to developed a high-precision verification circuit to perform ADC testing in the framework of the novel RDDS. The circuit generates a reference voltage pulse with a voltage–time integral relative precision better than 50 ppm for a few hundreds of mVs — the typical order of magnitude measured with the RDDS. The circuit’s design combines a fast and precise switch with a low-noise voltage reference. Long-term measurements allowed statistical analysis and showed that averaging the voltage–time integral of ten pulses gives the required 50 ppm stability. Moreover, reproducibility tests confirmed that the circuit’s output is invariable under small power supply instabilities and equipment shutdown. Instruments and applications designed to quantify the magnetic field by integrating voltage signals may use the pulse generator proposed in this paper for verification purposes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1973

Variable Time Base Integrator Circuit for Buffet Signal Measurements

A measurement circuit to obtain buffet data from wind tunnel models wherein a signal proportional to the average RMS value of buffet data is produced for subsequent recording. Feedback means are employed to suppress the D.C. portion of signals developed by the strain gages during dynamic testing. Automatic recording of gain settings of amplifiers employed in the circuit is also provided.

Batts, Colossie N.↗
DOE OSTI2026

Small Signaling Peptides in Sorghum bicolor : Integrating Phylogeny and Gene Expression to Characterize Roles in Stem Development

Small signaling peptides (SSPs) are important regulators of plant growth, development, and responses to biotic and abiotic stress, yet their role in the C4 grass Sorghum bicolor is largely uncharacterized. To help fill this knowledge gap, 219 sorghum genes that encode SSPs were identified based on SSP sequences previously identified in Arabidopsis thaliana, Zea mays, Oryza sativa, Triticum aestivum , and Brachypodium distachyon . The 219 sorghum SSP-encoding genes were assigned to 19 gene families, analyzed for the presence of motifs, and aligned with genes that encode SSPs in other plants using phylogenetic analysis. Sorghum genes in 12 of the 19 SSP gene families had not been previously characterized. Expression of the 219 SSP-encoding genes in sorghum organs, during stem development, and in stem tissues and cell types revealed distinct spatial, temporal, and developmental patterns of expression. Genes associated with the SbCEP and SbRGF families were preferentially expressed in roots, whereas SbEPF genes were expressed in stem epidermal and pith parenchyma cells and panicles. The expression of genes during bioenergy sorghum stem growth and development was investigated because stems account for ~80% of harvested biomass and serve as conduits for water and nutrient transport between leaves and roots. During stem development, 28 SSP genes in several families ( CLE, EPF, CEP, GASS, PSY, ES, PSK, CAPE, POE ) were expressed at higher levels in zones of cell proliferation. For example, the TDIF homologs SbCLE41 and SbCLE42 were expressed at high levels in nascent stem nodes where they may regulate vascular bundle cambial activity and cell differentiation. A different set of 15 genes in the CIF, POE, CAPE, PSY, CEP, RALF , and CLE families were expressed at higher levels in zones of stem tissue differentiation highlighted by elevated expression of five SbRALFR s in the stem nodal plexus. Cell type–specific expression of many sorghum genes that encode SSPs was observed in fully elongated internodes indicating gene expression is regulated with high spatial resolution. Overall, the results provide a foundation of information for analysis of SSP function in sorghum that can be integrated with knowledge of sorghum gene regulatory networks to modulate traits important for production of sorghum crops.

bioenergy sorghum↗
NASA NTRS1976

A CCD integrated circuit for transient recorders

A 50 MHz CCD integrated circuit is described that was developed for use in transient analog signal recorders to sample and time expand transient signals. The integrated circuit achieves an effective 200 MHz sample rate by using four 32 stage peristaltic CCDs to sample the transient signal four times each clock period. Dual frequency, 4 phi clocking is used to sample and time expand the sampled data. The output signals of the four CCDs are multiplexed on chip into a single low frequency output data line. When operated with 50 MHz/165 KHz 4 phi clocks, this circuit has a 200 MHz sample rate, a record length of 640 nanoseconds, a time expansion factor of 303, and overall signal to noise ratio of 40:1. The signal to noise ratio is limited by fixed pattern noise of the four CCDs.

Balch, J. W.↗
NASA NTRS1987

Detection of signals by the digital integrate-and-dump filter with offset sampling

The Integrate and Dump Filter (IDF) is used as a matched filter for the detection of signals in additive white Gaussian noise. The performance of the digital integrate and dump filter is evaluated. The case considered is when symbol times are known and the sampling clock is free running at a constant rate, i.e., the sampling clock is not phase locked to the symbol clock. Degradations in the output signal to noise ratio of the digital implementation due to sampling rate, sampling offset, and finite bandwidth, resulting from the anti-aliasing low pass prefilter, are computed and compared with those of the analog counterpart. It is shown that the digital IDF performs within 0.6 dB of the ideal analog IDF whenever the prefilter bandwidth exceeds four times the symbol rate and when sampling is performed at the Nyquist rate. The loss can be reduced to 0.3 dB by doubling the sampling rate, where 0.2 dB loss results from finite bandwidth and 0.1 dB results from the digital IDF.

Sadr, R.↗
DOE OSTI2020

Multi-Commodity Traffic Signal Control and Routing With Connected Vehicles

We report a real-time traffic management policy that integrates traffic signal control and multi-commodity routing of connected vehicles in networks with multiple destinations is developed. The proposed policy is based on a multi-commodity formulation of the store-and-forward model and assumes all vehicles are able to exchange information with the infrastructure. Vehicles share information about their current location and final destination. Based on this information, the strategy determines both optimized signal timings at every intersection and vehicle-specific routing information at every link of the network. The control actions, i.e., signal times and routing information, are updated at every cycle and delivered by a finite horizon optimal control problem cast into a rolling horizon framework. The underlying optimization problem is convex, and thus the method is suitable for real-time operation in large networks. The method is validated via a micro-simulation study in networks with up to twenty intersections and, in all simulations, outperforms a real-time traffic-responsive signal control strategy that is based on a single-commodity store-and-forward model. The scalable computation effort for increasing network sizes and prediction horizon confirms the computational efficiency of the method.

42 ENGINEERING↗
NASA NTRS1973

Television noise-reduction device

System greatly improves signal-to-noise ratio with little or no loss in picture resolution. By storage of luminance component, which is summed with chrominance component, system performs mathematical integration of basically-repetitive television signals. Integration of signals over interval of their repetition causes little change in original signals and eliminates random noise.

Stamps, J. C.↗
DOE OSTI2026

Developing Scenario‐Based Strategies for Health, Climate, and Environmental Preparedness: The One Health, One Earth Approach

Climate change amplifies many threats to human health. Despite advances in understanding climate change dynamics and impacts, there remains a critical gap in translating scientific knowledge into equitable, and community-driven health interventions. The inaugural One Earth, One Health workshop sought to explore this gap through human-centered design exercises involving interdisciplinary researchers from climate and Earth sciences, engineering, epidemiology, microbiology, and environmental health. Although participants did not co-develop solutions with affected communities, they used stakeholder role-playing to guide ideation and lay groundwork for actionable plans. Through these methods, participants identified community needs and proposed prototype solutions to alleviate health threats exacerbated by global environmental change. Prototypes were organized around infectious diseases, extreme weather, and air quality, as illustrative themes rather than an exhaustive set of risks. Key solutions included strategies for anticipatory systems and early warning (e.g., integrating environmental signals with health data), inclusive communication and infrastructure needs for responding to extreme weather events, and integrated platforms visualizing air quality trends to support tailored, context-aware guidance beyond one-size-fits-all alerts. The workshop highlighted opportunities such as leveraging machine learning, Earth observation, and real-time surveillance to protect communities, but also noted barriers including data quality, technological redundancy, privacy, and governance challenges. Additionally, participants emphasized the need for interdisciplinary teams capable of collaborating across sectors, breaking down silos and addressing gaps in training and education. Overall, the workshop illustrates how process-driven, human-centered approaches can help surface user needs and generate testable prototype concepts, while underscoring the importance of direct community partnership for implementation.

Abadi, Azar M. [University of Alabama, Birmingham,↗
NASA NTRS1973

A technique to eliminate false lock in PCM demodulation

One loop provides error signal which adjusts voltage controlled oscillator. Second loop multiplies input signal with generated in-phase signal. Both signals are integrated over bit period. First loop detects null which indicates lockup, and second loop emphasizes impact signal information.

Kobayashi, H. S.↗