SEARCH · Search NASA

Results for “simulation platform”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Machine learning–driven multiscale modeling reveals lipid-dependent dynamics of RAS signaling proteins

Significance Here we present an unprecedented multiscale simulation platform that enables modeling, hypothesis generation, and discovery across biologically relevant length and time scales to predict mechanisms that can be tested experimentally. We demonstrate that our predictive simulation-experimental validation loop generates accurate insights into RAS-membrane biology. Evaluating over 100,000 correlated simulations, we show that RAS–lipid interactions are dynamic and evolving, resulting in: 1) a reordering and selection of lipid domains in realistic eight-lipid bilayers, 2) clustering of RAS into multimers correlating with specific lipid fingerprints, 3) changes in the orientation of the RAS G-domain impacting its ability to interact with effectors, and 4) demonstration that RAS–RAS G-domain interfaces are nonspecific in these putative signaling domains.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS2013

Predicting Operator Execution Times Using CogTool

Researchers and developers of NextGen systems can use predictive human performance modeling tools as an initial approach to obtain skilled user performance times analytically, before system testing with users. This paper describes the CogTool models for a two pilot crew executing two different types of a datalink clearance acceptance tasks, and on two different simulation platforms. The CogTool time estimates for accepting and executing Required Time of Arrival and Interval Management clearances were compared to empirical data observed in video tapes and registered in simulation files. Results indicate no statistically significant difference between empirical data and the CogTool predictions. A population comparison test found no significant differences between the CogTool estimates and the empirical execution times for any of the four test conditions. We discuss modeling caveats and considerations for applying CogTool to crew performance modeling in advanced cockpit environments.

Santiago-Espada, Yamira↗

NASA NTRS2017

Modeling and Simulation Plans in Support of Low Cost, Size, Weight, and Power Surveillance Systems for Detecting and Tracking Non-Cooperative Aircraft

RTCA Special Committee (SC) 228 has initiated a second phase for the development of minimum operational performance standards (MOPS) for UAS detect and avoid (DAA) systems. Technologies to enable UAS with less available Size, Weight, and Power (SWaP) will be considered. RTCA SC-228 has established sub-working groups and one of the sub-working groups is focused on aligning modeling and simulations activities across all participating committee members. This briefing will describe NASAs modeling and simulation plans for the development of performance standards for low cost, size, weight, and power (C-SWaP) surveillance systems that detect and track non-cooperative aircraft. The briefing will also describe the simulation platform NASA intends to use to support end-to-end verification and validation for these DAA systems. Lastly, the briefing will highlight the experiment plan for our first simulation study, and provide a high-level description of our future flight test plans. This briefing does not contain any results or data.

surveillance↗

DOE OSTI2026

Fast, Controllable, and Modular Solid-State Circuit Breaker Design for Battery Management Systems

Electric power grid is experiencing a growing number of distributed and inertia-free generation resources. To facilitate the growing generation and load demands, and ensure stable operation, energy storage systems, especially behind-themeter-storage (BTMS), have emerged as a potential candidate. BTMS plays a vital role in the grid storage sector and supports high power charging for EVs. However, the potential of thermal runaway and associated safety concerns in the batteries can hamper their widespread adoption. In this work, we provide a solution for a fast and controllable discharge of a cell that was identified as a stressful/faulty, in the battery pack, and fast circuit breaking leveraging the Solid-State Circuit Breaker (SSCB) technology which provides active control over the cell connection as opposed to conventional passive solutions. Testing on the simulation platform successfully validated the concept, demonstrating its efficacy. Controlled discharge testing with 20Ah LiFePO4 Lithium Iron Phosphate (LFP) cells from 1C-10C current rate on the hardware prototype corroborated simulation results, demonstrating design feasibility and providing essential data for its performance and thermal characteristics, while also revealing limitations that inform areas for further optimization.

33 ADVANCED PROPULSION SYSTEMS↗

NASA NTRS2004

Robust Timing Synchronization in Aeronautical Mobile Communication Systems

This work details a study of robust synchronization schemes suitable for satellite to mobile aeronautical applications. A new scheme, the Modified Sliding Window Synchronizer (MSWS), is devised and compared with existing schemes, including the traditional Early-Late Gate Synchronizer (ELGS), the Gardner Zero-Crossing Detector (GZCD), and the Sliding Window Synchronizer (SWS). Performance of the synchronization schemes is evaluated by a set of metrics that indicate performance in digital communications systems. The metrics are convergence time, mean square phase error (or root mean-square phase error), lowest SNR for locking, initial frequency offset performance, midstream frequency offset performance, and system complexity. The performance of the synchronizers is evaluated by means of Matlab simulation models. A simulation platform is devised to model the satellite to mobile aeronautical channel, consisting of a Quadrature Phase Shift Keying modulator, an additive white Gaussian noise channel, and a demodulator front end. Simulation results show that the MSWS provides the most robust performance at the cost of system complexity. The GZCD provides a good tradeoff between robustness and system complexity for communication systems that require high symbol rates or low overall system costs. The ELGS has a high system complexity despite its average performance. Overall, the SWS, originally designed for multi-carrier systems, performs very poorly in single-carrier communications systems. Table 5.1 in Section 5 provides a ranking of each of the synchronization schemes in terms of the metrics set forth in Section 4.1. Details of comparison are given in Section 5. Based on the results presented in Table 5, it is safe to say that the most robust synchronization scheme examined in this work is the high-sample-rate Modified Sliding Window Synchronizer. A close second is its low-sample-rate cousin. The tradeoff between complexity and lowest mean-square phase error determines the rankings of the Gardner Zero-Crossing Detector and both versions of the Early-Late Gate Synchronizer. The least robust models are the high and low-sample-rate Sliding Window Synchronizers. Consequently, the recommended replacement synchronizer for NASA's Advanced Air Transportation Technologies mobile aeronautical communications system is the high-sample-rate Modified Sliding Window Synchronizer. By incorporating this synchronizer into their system, NASA can be assured that their system will be operational in extremely adverse conditions. The quick convergence time of the MSWS should allow the use of high-level protocols. However, if NASA feels that reduced system complexity is the most important aspect of their replacement synchronizer, the Gardner Zero-Crossing Detector would be the best choice.

Xiong, Fu-Qin↗

DOE OSTI2024

Performance Evaluation of Various Configurations for Domestic Refrigerators with R600a

The increasing global focus on mitigating global warming has driven a change in refrigerant selection for domestic refrigerators. While most existing refrigerators use R-134a as their working fluid, there is a gradual shift towards R600a in newly manufactured products to minimize environmental impact. In order to design a more energy-efficient isobutane refrigerator, various configurations, including both single-evaporator and dual-evaporator cycles, were investigated. The study was conducted using a high-fidelity simulation platform, the Heat Pump Design Model (HPDM), developed and experimentally validated by the US DOE/ORNL. This platform includes detailed segment-to-segment heat exchanger model, fan model, and compressor model, utilizing refrigerant properties from REFPROP 10. A quasi-steady-state approach was employed to simulate the transient behavior and performance of a domestic refrigerator. The performance of various configurations was compared, and the effects of the refrigerant properties and operating conditions were also analyzed and discussed.

Yang, Cheng-Min↗

NASA NTRS2002

Development of a Turbofan Engine Simulation in a Graphical Simulation Environment

This paper presents progress on the development of a generic component level model of a turbofan engine simulation, with a digital controller, in an advanced graphical simulation environment. The goal of this effort is to develop and demonstrate a flexible simulation platform for future research in propulsion system control and diagnostic technology. A FORTRAN-based model of a modem, high performance, military-type turbofan engine is being used to validate the platform development. The implementation process required the development of various innovative procedures, which are discussed in the paper. Open-loop and closed-loop comparisons are made between the two simulations. Future enhancements that are to be made to the modular engine simulation are summarized.

Parker, Khary I.↗

NASA NTRS2001

Development of a Turbofan Engine Simulation in a Graphical Simulation Environment

This paper presents progress on the development of a generic component level model of a turbofan engine simulation, with a digital controller, in an advanced graphical simulation environment. The goal of this effort is to develop and demonstrate a flexible simulation platform for future research in propulsion system control and diagnostic technology. A FORTRAN-based model of a modern, high- performance, military-type turbofan engine is being used to validate the platform development. The implementation process required the development of various innovative procedures, which are discussed in the paper. Open-loop and closed-loop comparisons are made between the two simulations. Future enhancements that are to be made to the modular engine simulation are summarized.

Parker, Khary I.↗

NASA NTRS2003

Development of a Turbofan Engine Simulation in a Graphical Simulation Environment

This paper presents the development of a generic component level model of a turbofan engine simulation with a digital controller, in an advanced graphical simulation environment. The goal of this effort is to develop and demonstrate a flexible simulation platform for future research in propulsion system control and diagnostic technology. A previously validated FORTRAN-based model of a modern, high-performance, military-type turbofan engine is being used to validate the platform development. The implementation process required the development of various innovative procedures, which are discussed in the paper. Open-loop and closed-loop comparisons are made between the two simulations. Future enhancements that are to be made to the modular engine simulation are summarized.

Parker, Khary I.↗

NASA NTRSDate not supplied

3D Stereo Immersive Environment Utilizing Mobile Devices / Peripherals

This project expands upon some of the FY23 IRAD funded "Full Lunar Surface Simulation Platform" (FLS-SP) derived technologies. The results have demonstrated a low-cost, compact, immersive technology that supports training, interaction, mission planning, and other man-in-loop activities in simulated environments called “3D Stereo Immersion Environment Utilizing Mobile Devices” (3D SIEUMD). These activities will become crucial for safety and mission, planning, and assurance in the Artemis program, as well as future commercial crew programs. The FLS-SP enabled the visualization of simulated lunar surface operations for rovers, landers, habitation, and EVA. The 3D SIEUMD technology allows for NASA S&MA experts, tasked with defining safety protocols and procedures, to interact in an immersive environment without expensive immersion gear. Reduction of the overall safety risk by immersing safety concepts into the design and engineering phase for very small cost is accomplished even before hardware is deployed to the lunar surface.

Scott Johnson↗

DOE OSTI2020

Evaluating Energy Efficiency Opportunities from Connected and Automated Vehicle Deployments Coupled with Shared Mobility in California

Connected and Automated Vehicles (CAVs) can be considered to be a disruptive transportation technology, with the potential to significantly improve overall transportation system efficiency; however, CAVs may increase induce vehicle miles traveled (VMT) and bring on greater energy consumption. Further, shared mobility is another disruptive transportation event that is reshaping our travel patterns. The primary goal of this project was to extensively collect data from vehicles and associated infrastructure equipped with CAV technologies from both real-world experiments and simulation studies mainly deployed in California, and develop a comprehensive framework for evaluating energy efficiency opportunities from large-scale (e.g., statewide) introduction of CAVs and a wide deployment of shared mobility systems in a variety of scenarios. To quantify the combined impact of CAV and shared mobility on travel behavior, traffic performance, and energy efficiency, a unique mesoscopic simulation-based model was developed for mobility and energy efficiency evaluation considering these disruptive transportation technologies. As a complement to existing studies on nationwide evaluation of CAVs’ energy impacts, this project was focused on data collection efforts and CAV applications under congested traffic environments that are frequently experienced on a massive scale across the major metropolitan areas in California. Extensive real-world data collection supplemented with simulation studies were conducted to cover a variety of CAV and shared mobility scenarios, particularly on scenarios less-explored in the existing research. Another key component of this project was to consider the interaction between different CAV technologies and shared mobility models, and the compound effect on energy efficiency. A comprehensive modeling suite was developed to quantify the impact of new mobility technologies on travel behavior and traffic performance. The developed modeling framework includes an energy intensity module, mode choice module and activity generation module that are integrated into an agent-based BEAM simulation platform to perform impact analysis based on a variety of scenarios. In addition, the RouteE model has been upgraded to incorporate the impact of CAVs on traffic flow, VMT and energy intensity, using micro-simulation data collected from both freeways and urban arterials. A novel fundamental influencing factor (FIF) mode choice model was developed to link CAV and shared mobility components with travel behaviors, and adapted into the BEAM-centered model framework. A statewide energy inventory was constructed under various CAV technology deployment scenarios by incorporating datasets and models for predicting vehicle market share and vehicle usage, which are tightly associated with the penetration of shared mobility systems. Based applying this modeling suite to a calibrated network in Riverside California, it was found that cooperative automated driving in general will improve mobility, but automated vehicles, even when deployed in a shared autonomous fleet, will likely bring an increase of VMT (up to 36%) due to mode shifts and deadheading. Ride-hailing vehicles typically have better energy efficiency and a higher share of electric vehicles, which helps offset the negative impact from VMT increases when estimating the system-level energy consumption. In general, simulation results show a 6% increase in energy consumption for the scenarios with an increasing shift to ride-hailing modes. The statewide analysis based on the National Household Travel Survey (NHTS) sample data is consistent with the findings from the Riverside network and validate the developed clustering-prediction modeling methodology. The outcomes from this project will help close the knowledge gap on recognizing the potential performance and energy impacts of a broad deployment of CAV and shared mobility technologies across a wide range of roadway infrastructure with varying levels of congestion. Results from this project: 1) will support policymakers in steering CAV development and deployment towards an energy favorable direction; 2) reduce uncertainties in estimating energy saving opportunities from new mobility technologies and services; 3) increase the confidence of CAV technology investors both on the infrastructure side (i.e., transportation agencies) and on the vehicle side (i.e., OEMs); and 4) expedite the deployment of energy-efficient CAV and shared mobility applications.

33 ADVANCED PROPULSION SYSTEMS↗

NASA NTRS2004

Advanced Aerospace Materials by Design

The advances in the emerging field of nanophase thermal and structural composite materials; materials with embedded sensors and actuators for morphing structures; light-weight composite materials for energy and power storage; and large surface area materials for in-situ resource generation and waste recycling, are expected to :revolutionize the capabilities of virtually every system comprising of future robotic and :human moon and mars exploration missions. A high-performance multiscale simulation platform, including the computational capabilities and resources of Columbia - the new supercomputer, is being developed to discover, validate, and prototype next generation (of such advanced materials. This exhibit will describe the porting and scaling of multiscale 'physics based core computer simulation codes for discovering and designing carbon nanotube-polymer composite materials for light-weight load bearing structural and 'thermal protection applications.

Srivastava, Deepak↗

NASA NTRS2017

Development of a High-Fidelity Simulation Environment for Shadow-Mode Assessments of Air Traffic Concepts

This paper describes the Shadow-Mode Assessment Using Realistic Technologies for the National Airspace System (SMART-NAS) Test Bed. The SMART-NAS Test Bed is an air traffic simulation platform being developed by the National Aeronautics and Space Administration (NASA). The SMART-NAS Test Bed's core purpose is to conduct high-fidelity, real-time, human-in-the-loop and automation-in-the-loop simulations of current and proposed future air traffic concepts for the United States' Next Generation Air Transportation System called NextGen. The setup, configuration, coordination, and execution of realtime, human-in-the-loop air traffic management simulations are complex, tedious, time intensive, and expensive. The SMART-NAS Test Bed framework is an alternative to the current approach and will provide services throughout the simulation workflow pipeline to help alleviate these shortcomings. The principle concepts to be simulated include advanced gate-to-gate, trajectory-based operations, widespread integration of novel aircraft such as unmanned vehicles, and real-time safety assurance technologies to enable autonomous operations. To make this possible, SNTB will utilize Web-based technologies, cloud resources, and real-time, scalable, communication middleware. This paper describes the SMART-NAS Test Bed's vision, purpose, its concept of use, and the potential benefits, key capabilities, high-level requirements, architecture, software design, and usage.

human-in-the-loop↗

NASA NTRSDate not supplied

Evaluation of Precision Landing Performance Using A Generalized Aerospace Simulation in Simulink Framework

NASA’s science and exploration goals to return to the Moon and beyond will need to perform precision landings to place humans and cargo supplies near places of scientific interest, surface resources, or pre-established basecamps. With the maturation of new navigation technology, such as terrain relative navigation, precision landing is now feasible, enabling new exploration sites, such as the lunar poles. However, verification of precision landing performance becomes crucial since not reaching the designated landing site would have a high risk of loss of mission. Therefore, having a high-fidelity simulation platform to evaluate six degrees of freedom vehicle performance during high-risk phases of flight such landing is a fundamental part of the system verification and risk reduction. The NASA Marshall Space Flight Center has developed the GeneraLized Aerospace Simulation in Simulink® (GLASS) tool which incorporates guidance, navigation, and control algorithms, as well as vehicle and environmental models, such as gravity, vehicle mass properties, navigation sensors, propulsion, and terrain models. GLASS uses the MathWorks® Simulink® environment which provides a model-based design framework that allows the incorporation of vehicle models in a modular architecture. The Simulink® environment provides seamless integration with all the MathWorks® capabilities and toolboxes, such as control design toolboxes and Simscape™ Multibody™ dynamics toolbox. The MathWorks® environment also allows for guidance, navigation, and control algorithms to be auto coded in C language, enabling quick software and hardware in the loop testing. This paper provides an overview of GLASS capabilities for analyzing precision landing performance, including navigation trades applied to a NASA human lander reference design architecture.

Guidance↗

DOE OSTI2022

Autonomous Microgrid Restoration Using Grid-Forming Inverters and Smart Circuit Breakers: Preprint

The proliferation of distributed inverter-based resources (IBRs) raises the questions if these IBRs can be used to blackstart microgrids and distribution feeders after major outages. In this paper, we propose and evaluate an autonomous microgrid restoration concept using grid-forming (GFM) IBRs and smart circuit creakers (SCBs). The concept is first explored in simulation platform and then a hardware testbed containing actual GFM inverters is developed to demonstrate these functionalities. A combination of dispatchable virtual oscillator control (dVOC) and droop-based control schemes have been designed for GFM inverter controls in the software simulations and hardware testbed. Subsequently, operation of SCBs using two distinct principles have been demonstrated that can restore or connect portions of the network.

grid reconfiguration↗

NASA NTRSDate not supplied

Integrating Upper Class E Traffic Management (ETM) Operations into the National Airspace System: Use Cases and Research Questions

As new categories of vehicles are introduced in the National Airspace System, so too are novel concepts for a cooperative approach to traffic management environments. One of these new environments, Upper Class E Traffic Management (ETM), is expected to include a variety of high altitude, long endurance vehicles with a range of performance capabilities and mission profiles that operate in cooperative areas above 60,000 feet. In addition to developing the rules, architecture, and systems for operations within the ETM environment itself, it is also important to consider how ETM vehicles will integrate with traditional Air Traffic Management and interact with Air Traffic Control (ATC) as they traverse ATC-controlled airspace and transition in and out of cooperative ETM operating areas. As a first step toward future ETM demonstrations at the National Aeronautics and Space Administration (NASA) Ames Research Center’s Airspace Operations Laboratory, use cases with step-by-step procedures were developed to identify both nominal and off-nominal scenarios in which ETM operations will interact with ATC. As NASA prepares to develop a simulation platform to demonstrate ETM cooperative practices and ETM-ATC interactions, the procedures, ATC roles and responsibilities, data exchange requirements, and research questions that were identified as part of use case development will inform scenario and system architecture design. The upcoming simulation work will include initial prototype ETM-ATC coordination tools to support ATC controllers’ interactions with ETM operations. This paper will briefly discuss NASA’s upcoming ETM development work and then provide background on ETM-ATC interactions, describe each ETM-ATC interaction use case, and discuss open questions on concept, procedures, and assumptions.

ATC↗

NASA NTRSDate not supplied

Integrating Upper Class E Traffic Management (ETM) Operations into the National Airspace System: Use Cases and Research Questions

ATC↗

DOE OSTI2024

Quantum Melting of Generalized Wigner Crystals in Transition Metal Dichalcogenide Moiré Systems

The generalized Wigner crystal (GWC) is a novel quantum phase of matter driven by further-range interaction at fractional fillings of a lattice. The role of further-range interaction as the driver for the incompressible state is akin to the Wigner crystal. On the other hand, the significant role of commensurate filling is akin to the Mott insulator. Recent progress in simulator platforms presents unprecedented opportunities to investigate quantum melting in the strongly interacting regime through synergy between theory and experiments. However, the earlier theory literature presents diverging predictions. We study the quantum freezing of GWC through large-scale density matrix renormalization group simulations of a triangular lattice extended Hubbard model. We find a single first-order phase transition between the Fermi liquid and the √3×√3 GWC state. Furthermore, the GWC state shows long-range antiferromagnetic 120° Néel order. Our results present the simplest answers to the question of the quantum phase transition into the GWC phase and the properties of the GWC phase.

Density matrix renormalization group↗