Search NASA⌕ Search

SEARCH · Search NASA

Results for “single atom”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Tailoring the d-band center on Ru 1 Cu single-atom alloy nanotubes for boosting electrochemical non-enzymatic glucose sensing

The development of cost-effective and highly efficient electrocatalysts is critical to help electrochemical non-enzymatic sensors achieve high performance. Here, in this work, a new class of catalyst, Ru single atoms confined on Cu nanotubes as a single-atom alloy (Ru 1 Cu NTs), with a unique electronic structure and property, was developed to construct a novel electrochemical non-enzymatic glucose sensor for the first time. The Ru 1 Cu NTs with a diameter of about 24.0 nm showed a much lower oxidation potential (0.38 V) and 9.0-fold higher response (66.5 μA) current than Cu nanowires (Cu NWs, oxidation potential 0.47 V and current 7.4 μA) for glucose electrocatalysis. Moreover, as an electrochemical non-enzymatic glucose sensor, Ru1Cu NTs not only exhibited twofold higher sensitivity (54.9 μA mM −1 cm −2 ) and wider linear range (0.5–8 mM) than Cu NWs, but also showed a low detection limit (5.0 μM), excellent selectivity, and great stability. According to theoretical calculation results, the outstanding catalytic and sensing performance of Ru 1 Cu NTs could be ascribed to the upshift of the d-band center that helped promote glucose adsorption. This work presents a new avenue for developing highly active catalysts for electrochemical non-enzymatic sensors.

electrochemistry↗
DOE OSTI2022

Single atoms and small clusters of atoms may accompany Au and Pd dendrimer-encapsulated nanoparticles

Here we report the presence of small clusters of atoms (<1 nm) (SCs) and single atoms (SAs) in solutions containing 1–2 nm dendrimer-encapsulated nanoparticles (DENs). Au and Pd DENs were imaged using aberration-corrected scanning transmission electron microscopy (ac-STEM), and energy dispersive spectroscopy (EDS) was used to identify and quantify the SAs/SCs. Two main findings have emerged from this work. First, the presence or absence of SAs/SCs depends on both the terminal functional group of the dendrimer (–NH 2 or –OH) and the elemental composition of the DENs (Au or Pd). Second, dialysis can be used to remove the majority of SAs/SCs in cases where a high density of SAs/SCs are present. The foregoing conclusions provide insights into the mechanisms for Au and Pd DEN synthesis and stability. Ultimately, these results demonstrate the need for careful characterization of systems containing nanoparticles to ensure that SAs/SCs, which may be below the detection limit of most analytical methods, are taken into consideration (especially for catalysis experiments).

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Insights into the Oxygen Evolution Reaction on Graphene-Based Single-Atom Catalysts from First-Principles-Informed Microkinetic Modeling

Single-atom transition metals embedded in nitrogen-doped graphene have emerged as promising electrocatalysts due to their high activity and low material cost. These materials have been shown to catalyze a variety of electrochemical reactions, but their active sites under reaction conditions remain poorly understood. Using first-principles density functional theory calculations, we develop a pH-dependent microkinetic model to evaluate the relative performance of transition metal catalysts embedded in fourfold N-substituted double carbon vacancies in graphene for the oxygen evolution reaction. We find that reaction pathways involving intermediates co-adsorbed on the metal site are preferred on all transition metals. These pathways lead to enhancements in catalytic activity and broaden the activity peak when compared with purely thermodynamics-based predictions. Furthermore, these findings demonstrate the importance of investigating reaction pathways on graphene-based catalysts and other two-dimensional (2D) materials that involve metal active centers decorated by spectator intermediate species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ru Single Atoms on One-Dimensional CF@g-C 3 N 4 Hierarchy as Highly Stable Catalysts for Aqueous Levulinic Acid Hydrogenation

Herein, we report a stable catalyst with Ru single atoms anchored on a one-dimensional carbon fiber@graphitic carbon nitride hierarchy, by assembling wet wipes composed of fiber-derived carbon fiber (CF), melamine-derived graphitic carbon nitride (g-C3N4) and RuCl3 before NaBH4 reduction. The atomically dispersed Ru species (3.0 wt%) are tightly attached via N-coordination provided by exterior g-C3N4 nanosheets, and further stabilized by the interior mesoporous CF. The obtained CF@g-C3N4–Ru SAs catalyst can be cycled six times without notable leaching of Ru or loss of GVL yield in the acidic media. This catalyst is more stable than Ru nanoparticles supported on CF@g-C3N4, as well as Ru single atoms anchored on CF and g-C3N4, and proves to be one of the most efficient metal catalysts for aqueous LA hydrogenation to γ-valerolactone (GVL). The isolated Ru atoms by strong N-coordination, and their enhanced electron/mass transfer afforded by the one-dimensional hierarchy, can be responsible for the excellent durability of CF@g-C3N4–Ru SAs under harsh reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Stability of heterogeneous single-atom catalysts: a scaling law mapping thermodynamics to kinetics

Heterogeneous single-atom catalysts (SACs) hold the promise of combining high catalytic performance with maximum utilization of often precious metals. We extend the current thermodynamic view of SAC stability in terms of the binding energy (E bind ) of single-metal atoms on a support to a kinetic (transport) one by considering the activation barrier for metal atom diffusion. A rapid computational screening approach allows predicting diffusion barriers for metal–support pairs based on E bind of a metal atom to the support and the cohesive energy of the bulk metal (E c ). Metal–support combinations relevant to contemporary catalysis are explored by density functional theory. Assisted by machine-learning methods, we find that the diffusion activation barrier correlates with (E bind ) 2 /E c in the physical descriptor space. This diffusion scaling-law provides a simple model for screening thermodynamics to kinetics of metal adatom on a support.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Free-standing membrane incorporating single-atom catalysts for ultrafast electroreduction of low-concentration nitrate

The release of wastewaters containing relatively low levels of nitrate (NO 3 ⁻) results in sufficient contamination to induce harmful algal blooms and to elevate drinking water NO 3 ⁻ concentrations to potentially hazardous levels. In particular, the facile triggering of algal blooms by ultra-low concentrations of NO 3 ⁻ necessitates the development of efficient methods for NO 3 ⁻ destruction. However, promising electrochemical methods suffer from weak mass transport under low reactant concentrations, resulting in long treatment times (on the order of hours) for complete NO 3 ⁻ destruction. In this study, we present flow-through electrofiltration via an electrified membrane incorporating nonprecious metal single-atom catalysts for NO 3 ⁻ reduction activity enhancement and selectivity modification, achieving near-complete removal of ultra-low concentration NO 3 ⁻ (10 mg-N L -1 ) with a residence time of only a few seconds (10 s). By anchoring Cu single atoms supported on N-doped carbon in a carbon nanotube interwoven framework, we fabricate a free-standing carbonaceous membrane featuring high conductivity, permeability, and flexibility. The membrane achieves over 97% NO 3 ⁻ removal with high N 2 selectivity of 86% in a single-pass electrofiltration, which is a significant improvement over flow-by operation (30% NO 3 ⁻ removal with 7% N 2 selectivity). This high NO 3 ⁻ reduction performance is attributed to the greater adsorption and transport of nitric oxide under high molecular collision frequency coupled with a balanced supply of atomic hydrogen through H 2 dissociation during electrofiltration. Overall, our findings provide a paradigm of applying a flow-through electrified membrane incorporating single-atom catalysts to improve the rate and selectivity of NO 3 ⁻ reduction for efficient water purification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Single-Atomic Site Catalyst Enhanced Lateral Flow Immunoassay for Point-of-Care Detection of Herbicide

Point-of-care (POC) detection of herbicides is of great importance due to their impact on the environment and potential risks to human health. Here, we design a single-atomic site catalyst (SASC) with excellent peroxidase-like (POD-like) catalytic activity, which enhances the detection performance of corresponding lateral flow immunoassay (LFIA). The iron single-atomic site catalyst (Fe-SASC) is synthesized from hemin-doped ZIF-8, creating active sites that mimic the Fe active center coordination environment of natural enzyme and their functions. Due to its atomically dispersed iron active sites that result in maximum utilization of active metal atoms, the Fe-SASC exhibits superior POD-like activity, which has great potential to replace its natural counterparts. Also, the catalytic mechanism of Fe-SASC is systematically investigated. Utilizing its outstanding catalytic activity, the Fe-SASC is used as label to construct LFIA (Fe-SASC-LFIA) for herbicide detection. The 2,4-dichlorophenoxyacetic acid (2,4-D) is selected as a target here, since it is a commonly used herbicide as well as a biomarker for herbicide exposure evaluation. A linear detection range of 1-250 ng/mL with a low limit of detection (LOD) of 0.82 ng/mL has been achieved. Meanwhile, excellent specificity and selectivity towards 2,4-D have been obtained. The outstanding detection performance of the Fe-SASC-LFIA has also been demonstrated in the detection of human urine samples, indicating the practicability of this POC detection platform for analyzing the 2,4-D exposure level of a person. We believe this proposed Fe-SASC-LFIA has potential as a portable, rapid, and high-sensitive POC detection strategy for pesticide exposure evaluation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Descriptors for Hydrogen Evolution on Single Atom Catalysts in Nitrogen-Doped Graphene

Single-atom catalysts (SACs) are a new research frontier in electrocatalysis such as in the hydrogen evolution reaction (HER). Recent theoretical and experimental studies have demonstrated that certain M–N–C (metal–nitrogen–carbon) based SACs exhibit excellent performance for HER. Here we report a new approach to tune HER activity for SACs by changing the size and dimensionality of the carbon substrate while maintaining the same coordination environment. In this work, we screen the 3d, 4d, and 5d transition metal SACs in N-doped 2D graphene and nanographenes of several sizes for HER using first-principles density functional theory (DFT). Nanographenes containing V, Rh, and Ir are predicted to have significantly enhanced HER activity compared to their 2D graphene counterparts. We turn to machine learning to accurately predict the free energy of hydrogen adsorption (ΔGH) based on various descriptors and compressed sensing to identify key descriptors for activity, which can be used to further screen for additional candidates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Metal–Organic Framework as a Dual Support for Organic Photosensitizers and Single-Atom Catalysts

Metal–organic framework (MOF)-supported single-atom catalysts (SACs) possess integrated unique capabilities of both MOF and SACs, which represent a promising class of catalysts for photocatalytic applications. Herein, we report the incorporation of nickel (Ni) SACs onto its zirconium node and the functionalization of the organic linker of the zirconium MOF with perylene tetracarboxylic dianhydride (PDA), resulting in the formation of a hybrid MOF (denoted as Ni-PiU) with significantly enhanced light absorption ability in the visible region. Using the combination of time-resolved emission and X-ray absorption spectroscopy, we show that efficient charge separation occurs by electron transfer from incorporated PDA to Ni SACs with super slow charge recombination dynamics. As a result of these important photophysical properties, Ni-PiU MOF exhibits excellent photocatalytic activity and durability for the hydrogen evolution reaction. Finally, this work demonstrates the unique ability of MOFs as a dual platform to incorporate both SACs and a light absorption unit into their framework, providing a promising strategy for rational design of next-generation photocatalytic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Enhancing the inherent catalytic activity and stability of TiO 2 supported Pt single-atoms at CeO x –TiO 2 interfaces

Single-atoms (SAs) with atomically coordinated reaction centers are considered the next generation of catalysts that can exhibit exceptional catalytic efficiency. However, the general concern about thermodynamic vulnerabilities of SAs questions their practical value. Moreover, whether the inherent catalytic nature of SAs is superior compared with that of larger nanoparticles is still under debate. Here, we address two controversies by a comparative study using two catalysts: Pt/TiO 2 and Pt/CeO x –TiO 2 . Based on a hierarchical study of density functional theory, time-resolved catalysis performance test, in situ infrared spectroscopy, and operando X-ray absorption spectroscopy, we could unveil the catalytic nature of Pt-SAs and their stability. By utilizing the heterogeneous interface formed between TiO 2 supporting particles and CeO x clusters formed on the surface of TiO 2 , we preferentially synthesized Pt-SAs pinned at the CeO x –TiO 2 interfaces on CeO x –TiO 2 hybrid-oxide supports. The strong electronic coupling between the Pt-SAs and the Ce ions at the CeO x –TiO 2 interfaces enhanced the catalytic activity toward CO oxidation of Pt-SAs and improved the long-term stability under CO oxidation conditions. The CO oxidation activity of Pt-SAs stabilized at CeO x –TiO 2 was improved by 13.5 times at 200 °C compared with the Pt-SAs on TiO 2 . The results present how to easily improve the activity and stability of Pt-SAs using a simple interface control method. Moreover, we demonstrate that the catalytic activity and the stability of Pt-SAs can be monitored through the chemical state of the interfaces. Finally, our study provides comprehensive understanding about the catalytic nature as well as a novel strategy toward applications of Pt-SAs, enabling sustainable use of Pt in heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Stabilizing Single-Atom Iron Electrocatalysts for Oxygen Reduction via Ceria Confining and Trapping

Atomically dispersed Fe-N-C materials recently hold great interest in costly Pt substitution for the cathodic oxygen reduction reaction of fuel cells. However, the heat treatment involved in the materials preparation excites Fe aggregating into low activity of nanosized species rather than high activity of single-atom Fe sites. Herein we proposed a new "ceria-assisted" strategy to preferentially generate the active single-atom Fe sites in Fe-N-C materials, which involves oxidative polymerization of pyrrole, Ce 3+ and Fe 3+ adsorption, and subsequent heat treatment. Owing to its spatial confinement and strong trapping for Fe atoms, ceria can effectively suppress agglomeration of isolated Fe atoms and stabilize the Fe atoms by bonding to O in the lattice during the heat treatment, leading to a high content of atomically dispersed Fe (4.6 wt.%). Accordingly, the final catalyst showed ultrahigh ORR activity with a half-wave potential of 0.915 V and kinetic current density of 7.15 mA cm -2 at 0.9 V. When it was as assembled an anion exchange membrane fuel cell, a large maximum power density of 496 mW cm -2 was achieved.

25 ENERGY STORAGE↗
DOE OSTI2023

Highly active, ultra-low loading single-atom iron catalysts for catalytic transfer hydrogenation

Highly effective and selective noble metal-free catalysts attract significant attention. Here, a single-atom iron catalyst is fabricated by saturated adsorption of trace iron onto zeolitic imidazolate framework-8 (ZIF-8) followed by pyrolysis. Its performance toward catalytic transfer hydrogenation of furfural is comparable to state-of-the-art catalysts and up to four orders higher than other Fe catalysts. Isotopic labeling experiments demonstrate an intermolecular hydride transfer mechanism. First principles simulations, spectroscopic calculations and experiments, and kinetic correlations reveal that the synthesis creates pyrrolic Fe(II)-plN 3 as the active center whose flexibility manifested by being pulled out of the plane, enabled by defects, is crucial for collocating the reagents and allowing the chemistry to proceed. The catalyst catalyzes chemoselectively several substrates and possesses a unique trait whereby the chemistry is hindered for more acidic substrates than the hydrogen donors. This work paves the way toward noble-metal free single-atom catalysts for important chemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Manipulating the Second Coordination Shell of Single-Atom Fe for Enhanced Fenton Reaction

While current methods use oxidizable metals as electron donors to effectively reduce Fe 3+ , they suffer from the irreversible oxidation of these metals, ultimately compromising the catalyst’s longevity. To address this challenge, we engineered the second coordination shell of a single-atom Fe center by doping boron (B) onto a graphene-based support (Fe 1 /B-graphene) and utilized H 2 O 2 as the electron source for efficient Fe 2+ regeneration. Experimental results, supported by theoretical calculations, revealed that the Fe–O–B motif functions like a micro galvanic cell, with intermediary O atoms facilitating electron transfer between electrodes. Specifically, electrons consumed during H 2 O 2 activation at Fe 1 sites (positive electrode) are replenished by electrons extracted from H 2 O 2 at B atoms (negative electrode), where the activation energy for H 2 O 2 oxidation is significantly lower than that at Fe 1 sites. This study offers inspirational insights into the design of Fenton catalysts through precise regulation of the second coordination shell, demonstrating the potential of tailoring the outer coordination environment of single-atom catalysts to enhance catalytic performance across various reactions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Engineering unsymmetrically coordinated Cu-S 1 N 3 single atom sites with enhanced oxygen reduction activity

Atomic interface regulation is thought to be an efficient method to adjust the performance of single atom catalysts. Herein, a practical strategy was reported to rationally design single copper atoms coordinated with both sulfur and nitrogen atoms in metal-organic framework derived hierarchically porous carbon (S-Cu-ISA/SNC). The atomic interface configuration of the copper site in S-Cu-ISA/SNC is detected to be an unsymmetrically arranged Cu-S 1 N 3 moiety. The catalyst exhibits excellent oxygen reduction reaction activity with a half-wave potential of 0.918 V vs. RHE. Additionally, through in situ X-ray absorption fine structure tests, we discover that the low-valent Cuprous-S 1 N 3 moiety acts as an active center during the oxygen reduction process. Our discovery provides a universal scheme for the controllable synthesis and performance regulation of single metal atom catalysts toward energy applications.

25 ENERGY STORAGE↗
DOE OSTI2022

Achieving complete electrooxidation of ethanol by single atomic Rh decoration of Pt nanocubes

Significance Direct ethanol fuel cells are attracting growing attention as portable power sources due to their advantages such as higher mass-energy density than hydrogen and less toxicity than methanol. However, it is challenging to achieve the complete electrooxidation to generate 12 electrons per ethanol, resulting in a low fuel utilization efficiency. This manuscript reports the complete ethanol electrooxidation by engineering efficient catalysts via single-atom modification. The combined electrochemical measurements, in situ characterization, and density functional theory calculations unravel synergistic effects of single Rh atoms and Pt nanocubes and identify reaction pathways leading to the selective C–C bond cleavage to oxidize ethanol to CO 2 . This study provides a unique single-atom approach to tune the activity and selectivity toward complicated electrocatalytic reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effect of single atom Platinum (Pt) doping and facet dependent on the electronic structure and light absorption of Lanthanum Titanium Oxide (La 2 Ti 2 O 7 ): A Density Functional Theory study

Charge generation and separation are two key processes for semiconductor photocatalysis. Here, we use Pt as a single atom catalyst to systematically examine the facet-dependent electronic band structure and light absorption of the layered perovskite-type wide-gap semiconductor, lanthanum titanium oxide (La 2 Ti 2 O 7 , LTO) by means of density functional theory simulations. In this study, it is found that single Pt atom doping of different LTO surfaces (here, (100), (101) and (001)) can not only create states in the bandgap that would promote the formation of recombination centers, but also shift the optical absorption edge to the visible region. Interestingly, the Pt doping forms a heterojunction, with the valence band maximum consisting of Pt states and the conduction band minimum consisting of LTO states, respectively. To study the facet dependent surface activity, acetic acid (CH 3 COOH) was used as a model molecule to investigate the adsorption and charge transfer on the (101), (100) and (001) Pt-LTO surface facets. The results show that the (101) facet could enable stronger adsorption of CH 3 COOH by promoting more electron transfer during the interfacial interaction. Our theoretical findings aim to promote the design and optimization of the single atom catalysts (SACs) for photocatalytic applications and other broad catalysis systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Tungsten single-atom catalysts for the efficient conversion of isobutene into highly branched liquid hydrocarbons

The catalytic transformation of isobutene into branched liquid hydrocarbons is crucial for the production of reformulated gasoline and fuel additives. Conventional supported catalysts often lack high activity and selectivity toward the desired highly branched dimers and trimers in isobutene oligomerization. Here, by developing a tungsten single-atom catalyst (W SAC ) atomically dispersed on a silica-doped alumina (SDA) support, we report that the W SAC /SDA catalyst enables efficient and selective conversion of isobutene into highly branched C 8 and C 12 liquid olefins while suppressing the formation of heavier hydrocarbons. The atomically dispersed W 1 –O 3 moieties incorporated within the SDA support were synthesized via a high-temperature pyrolysis of a templating zinc metal–organic framework (Zn-MOF) under argon, followed by annealing in static air. The W SAC /SDA catalysts with 1.6–3.7 wt% W loading exhibited single-atom dispersion (∼0.2 nm) and outstanding performance, achieving up to 60% and 95% selectivity to branched C8 olefins at 150 °C and 250 °C, respectively, under ambient pressure. With the demonstrated high activity, selectivity, and stability, the W SAC /SDA catalyst system presents a promising platform for next-generation heterogeneous catalysts for the efficient and selective upgrading of isobutene into high-performance fuel additives.

Branched Olefins↗