Search NASA⌕ Search

SEARCH · Search NASA

Results for “site evaluation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Consequence analyses of sabotage-induced radiological releases in sodium-cooled fast microreactors

Analysis of three sodium-cooled fast microreactors (SFMs) with thermal powers of 10, 30, and 50 MWt showed that smaller reactors result in lower radiological consequences during a postulated sabotage-induced event because of their reduced core inventory. All SFMs used U-10Zr metal fuel enriched to 15 wt% high-assay low-enriched uranium and operated until their respective effective multiplication factor (k eff ) reduced to less than 1 or until the end of their operational lifespan. Sabotage scenarios were simulated at this point, when the fuel inventory within the core contains the highest-level of radioactivity. Radionuclide core inventories were calculated using the SCALE code at shutdown and 3 days post-shutdown. Dose consequence analyses were performed for three sabotage scenarios using the RASCAL tool. As microreactor developers plan for minimal on-site or complete off-site emergency response, it remains essential to evaluate their physical protection needs and potential hazards, including assessing postulated sabotage-induced events that could become more relevant. SFM licensees should identify a credible worst-case, major accident, estimate release source terms, and perform dose consequence analyses to evaluate site-specific physical protection measures. In conclusion, this recommendation supports a risk-informed, performance-based approach, aligning with applicable regulatory requirements, i.e., 10 CFR Parts 100 and 53 rulemaking in the United States.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2022

Corrective Action Unit 98: Frenchman Flat Five-Year Evaluation Nevada National Security Site, Nevada (Revision 1)

The Corrective Action Unit (CAU) 98, Frenchman Flat (FF) Closure Report (CR) (NNSA/NFO, 2016) and its ensuing Records of Technical Change (ROTCs) (compiled in DOE/EMNV, 2019) required the U.S. Department of Energy (DOE), Environmental Management (EM) Nevada Program’s Underground Test Area (UGTA) Activity to collect data for five years to establish triggers for the monitoring network and analyze the monitoring points for viability in long-term monitoring. This document provides the results of the five-year evaluation and presents recommendations for future monitoring of CAU 98.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Evaluating Probability of Containment Effectiveness at a GCS Sites using integrated assessment modeling approach with Bayesian decision Networks

Improved scientific and engineering understanding of the behavior of geologic CO2 storage together with established regulatory framework and incentive structures raise the prospects for accelerated, large-scale deployment of this greenhouse gas emissions reduction approach. Incentive structures call for the establishment of appropriate verification and accounting approaches to support claims of the integrity of a geologic storage complex and to justify taking credit for long-term storage. In this study, we present a framework for assessing the probability of containment effectiveness over the lifetime of a geologic carbon storage site (e.g., after 70 years of injection and post-injection site performance) using forward stochastic model realizations based on site characterization data and using a monitoring-informed Bayesian network based on hypothetical detectability from surface seismic surveys over the site injection and post-injection phases. The National Risk Assessment Partnership’s open-source Integrated Assessment Model (NRAP-Open-IAM) was utilized to develop an ensemble of 10,000 a priori stochastic forecasts of CO2 containment. Those simulations were used to train the Bayesian network model to estimate the prior probabilities of the CO2 leakage mass into overlying, monitorable aquifers considering the uncertainties in the reservoir properties, permeability of potentially leaky wells and the overlying aquifers. The conditional probabilities in the Bayesian network were either learned from the NRAP-Open-IAM simulations or derived from the predefined detection thresholds for the monitoring method. Observations obtained from monitoring, over time during the site operation phases were then used to generate updated posterior probabilities of containment (and any loss from containment) in the Bayesian network by propagating the prior probabilities through the conditional probabilities. We demonstrate how to construct and use the Bayesian network for verifying the long-term storage complex effectiveness informed by monitoring based on the NRAP-Open-IAM simulations previously developed for the FutureGen 2.0 site. This approach may have relevance for stake holders to demonstrate secure geologic storage, provide a defensible, probabilistic approach to claim credit for geologic storage, and to estimate the likelihood that any fraction of the claimed credit may need to be refunded to the creditor based on available monitoring information.

Bayesian network, Risk assessment, Monitoring, car↗
DOE OSTI2026

Data for Filling the Cellulosic Bio-economy Gap by Utilizing a Wedge Approach Combined with Stakeholder Collaboration

The price gap between the market and breakeven prices of cellulosic biomass for farmers represents a significant barrier to the development of a low-carbon cellulosic bioeconomy. Using a bottom-up, agent-based modeling tool that replicates the behaviors and interactions of key stakeholders, this study analyzes the emergence of a cellulosic bioeconomy at the local scale through a wedge approach that examines an integrated portfolio of multiple policy options, including subsidies for small-scale bioproducts and environmental credits. The role of collaboration among multiple stakeholders, such as biomass producers (farmers), bio-refinery industry, government, and society, is assessed for filling the price gap. Using the Sangamon River Basin as a case study site, we evaluate the effectiveness of the wedge approach by comparing simulation results from multiple scenarios, each incorporating different combinations of bioeconomy wedges, with and without stakeholder collaboration. Results underscore that active collaboration among stakeholders acts as a catalyst enlarging the effectiveness of bioeconomy wedges. Including the carbon credits and environmental value in the policy portfolio is found to bridge the price gap through collective contributions from diverse stakeholders, where the cellulosic biofuel and bioproduct industry plays a pivotal role. Although this study is conducted at the local watershed scale, the methodology and findings offer valuable insights for market development in other watersheds and the potential scaling of local markets to regional and national levels.

Economics↗
DOE OSTI2025

Soil biogeochemical properties and metrics of tree-mycorrhizal dominance for a 25-Ha forest in South Central Indiana, USA.

This data package contains a dataset used in the papers “Seeing the forest for all the trees: Mycorrhizal-associated nutrient economies are modulated by stem density and the synchrony between overstory and understory communities” and “Mycorrhizal associations of tree species influence soil nitrogen dynamics via effects on soil acid–base chemistry”. Four csv files are included along with a dataset. The dataset features chemical soil properties for a single sampling campaign within the 25 Ha Lilly-Dickey Woods Smithsonian Forest Global Earth Observatory (ForestGEO) plot in South Central Indiana, USA (ldw_dat_raw.csv). Also included are separate files focused on pH (pH_data.csv), carbon and nitrogen (CN_data.csv), and nitrification rates (Nitrification_data.csv). These variables are commonly associated with the tree-mycorrhizal dominance of forest stands. In these data subsets, each soil variable was matched to a 10 meter radius neighborhood wherein metrics of tree-mycorrhizal dominance (basal area, stem count, importance value, etc.) were calculated. Models between these soil variables and dominance metrics were used to investigate how different assessments of mycorrhizal associated nutrient economies (MANE) capture these relationships. This research was performed as a part of the Smithsonian ForestGEO project. This data package can be used to explore spatial variability in soil chemistry within a mature hardwood forest, or it can be combined with the included tree data, other fine-scale spatial information, or other tree inventory data for the site to evaluate how soil chemistry varies with tree community composition or edaphic or topographic properties.

Craig, Matthew [ORNL] (ORCID:0000000288907920)↗
DOE OSTI2023

Evaluating the active site-substrate interplay between x-ray crystal structure and molecular dynamics in chorismate mutase

Designing realistic quantum mechanical (QM) models of enzymes is dependent on reliably discerning and modeling residues, solvents, and cofactors important in crafting the active site microenvironment. Interatomic van der Waals contacts have previously demonstrated usefulness toward designing QM-models, but their measured values (and subsequent residue importance rankings) are expected to be influenceable by subtle changes in protein structure. Using chorismate mutase as a case study, this work examines the differences in ligand-residue interatomic contacts between an x-ray crystal structure and structures from a molecular dynamics simulation. Select structures are further analyzed using symmetry adapted perturbation theory to compute ab initio ligand-residue interaction energies. The findings of this study show that ligand-residue interatomic contacts measured for an x-ray crystal structure are not predictive of active site contacts from a sampling of molecular dynamics frames. In addition, the variability in interatomic contacts among structures is not correlated with variability in interaction energies. However, the results spotlight using interaction energies to characterize and rank residue importance in future computational enzymology workflows.

Chemistry↗
NASA NTRS1981

Report of Workshop on Methodology for Evaluating Potential Lunar Resources Sites

The type and quantity of lunar materials needed to support a space power satellite program was used to define the type and quality of geological information required to certify a site for exploitation. The existing geological, geochemical, and geophysical data are summarized. The difference between these data and the required data for exploitation is used to define program requirements. Most of these requirements involve linear extensions of existing capabilities, fuller utilization of existing data, or expanded use of automated systems.

Williams, R. J.↗
NASA NTRS2008

Utilizing Mars Global Reference Atmospheric Model (Mars-GRAM 2005) to Evaluate Entry Probe Mission Sites

The Mars Global Reference Atmospheric Model (Mars-GRAM 2005) is an engineering-level atmospheric model widely used for diverse mission applications. An overview is presented of Mars-GRAM 2005 and its new features. The "auxiliary profile" option is one new feature of Mars-GRAM 2005. This option uses an input file of temperature and density versus altitude to replace the mean atmospheric values from Mars-GRAM's conventional (General Circulation Model) climatology. Any source of data or alternate model output can be used to generate an auxiliary profile. Auxiliary profiles for this study were produced from mesoscale model output (Southwest Research Institute's Mars Regional Atmospheric Modeling System (MRAMS) model and Oregon State University's Mars mesoscale model (MMM5) model) and a global Thermal Emission Spectrometer (TES) database. The global TES database has been specifically generated for purposes of making Mars-GRAM auxiliary profiles. This data base contains averages and standard deviations of temperature, density, and thermal wind components, averaged over 5-by-5 degree latitude-longitude bins and 15 degree Ls bins, for each of three Mars years of TES nadir data. The Mars Science Laboratory (MSL) sites are used as a sample of how Mars-GRAM' could be a valuable tool for planning of future Mars entry probe missions. Results are presented using auxiliary profiles produced from the mesoscale model output and TES observed data for candidate MSL landing sites. Input parameters rpscale (for density perturbations) and rwscale (for wind perturbations) can be used to "recalibrate" Mars-GRAM perturbation magnitudes to better replicate observed or mesoscale model variability.

Justh, Hilary L.↗
NASA NTRS2008

Utilizing Mars Global Reference Atmospheric Model (Mars-GRAM 2005) to Evaluate Entry Probe Mission Sites

Engineering-level atmospheric model widely used for diverse mission applications. Mars-GRAM s perturbation modeling capability is commonly used, in a Monte-Carlo mode, to perform high fidelity engineering end-to-end simulations for entry, descent, and landing (EDL)1. Traditional Mars-GRAM options for representing the mean atmosphere along entry corridors include: a) TES Mapping Years 1 and 2, with Mars-GRAM data coming from MGCM model results driven by observed TES dust optical depth; and b) TES Mapping Year 0, with user-controlled dust optical depth and Mars-GRAM data interpolated from MGCM model results driven by selected values of globally-uniform dust optical depth. From the surface to 80 km altitude, Mars-GRAM is based on NASA Ames Mars General Circulation Model (MGCM). Mars-GRAM and MGCM use surface topography from Mars Global Surveyor Mars Orbiter Laser Altimeter (MOLA), with altitudes referenced to the MOLA areoid, or constant potential surface. Mars-GRAM 2005 has been validated2 against Radio Science data, and both nadir and limb data from the Thermal Emission Spectrometer (TES)

Justh, Hilary L.↗
NASA NTRSDate not supplied

ISRU Evaluation of Artemis Campaign Sites: Considerations and Methodology

The Artemis campaign has stated goals of ‘sustainable exploration’ [1] which includes In-Situ Resource Utilization (ISRU). The selection of the lunar polar region for Artemis was in part due to the identification of water in permanently shadowed regions (PSRs) which is of both scientific and exploration interest. The potential use of this water (as is, or as oxygen/hydrogen) for NASA and commercial applications, such as refueling vehicles, for power systems, or supplying life support consumables, is reflected in NASA’s Moon to Mars objectives (LI-7) [2]. These objectives also specify the need to locate and characterize the lunar water such that a water ‘reserve’ can be identified (AS-3). While infusion of ISRU capabilities is not planned for Artemis III, it is an opportunity to collect information to identify water reserves for later Artemis and commercial use. Selection of an Artemis III site with ISRU consideration will help advance the infusion of ISRU into later missions.

In situ resource utilization↗
DOE OSTI2020

Calculation of Moisture-Dependent, Anisotropic Parameters Supporting the Hanford Site's Composite Analysis, Cumulative Impact Evaluation, and Performance Assessments

Variable, moisture (tension) dependent anisotropy (MDA) in unsaturated soils is an effective, large-scale (macroscopic) flow property that results from media heterogeneities at a smaller scale. The purpose of this environmental calculation file (ECF) is to document the variable MDA calculations using a script routine. The accuracy of the script calculations are cross-checked against results using other software. Appendices for this ECF are Appendix A, which documents supporting script use; Appendix B, which provides supporting spreadsheet calculations; and Appendix C, which provides supporting utility calculations. The work is in support of vadose zone flow and transport models used in performance assessment (PA), composite analysis (CA), and cumulative impact evaluation (CIE) at the Hanford Site.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Energy Infrastructure Futures: A Multiscale Evaluation of Projected Power Plant Siting Across the Western Interconnection

The US Western Interconnection is facing unprecedented challenges in the form of less predictable peak demand, increasingly diverse generating resources, and fast-growing loads due to the onset of artificial intelligence, hyperscale computing, and electrification. Projecting where future generation may be developed is critical to maintaining a robust and resilient electric grid under this mounting uncertainty and variability. Using an integrated multisectoral, multiscale modeling framework that links a human-Earth systems model, an hourly load model, a geospatial power plant siting model, and an hourly grid operations model, we evaluate the power plant landscape evolution under eight alternative futures between 2020 and 2055. These futures represent a wide but plausible range of atmospheric conditions, emissions constraints, and economic, technological, and population growth assumptions. We find that local-level development can vary substantially both by generation type and capacity buildout across these futures. Specific regions of the Western Interconnection are projected to see large amounts of capacity development regardless of the future scenario. We additionally determine that projected power plant locations are more heavily influenced by the cost to interconnect to the electric grid than the locational energy value.

Mongird, Kendall↗
DOE OSTI2020

Technology Assessment for Radioiodine at the Hanford Site - 20240

An evaluation was conducted to assess the practicability of technologies of sufficient promise and maturity to warrant treatability tests for remediating radioiodine (I-129) in groundwater at the 200-UP-1 operable unit at the U.S. Department of Energy Hanford Site. Technologies were evaluated based on recent updated knowledge of subsurface iodine transport behavior at Hanford, and the effectiveness, implementability, and cost of potential treatment technologies for I-129. Because more than two-thirds of the iodine at Hanford is estimated to be present in its oxidized form as iodate, treatment technologies were evaluated with respect to addressing iodate. In situ treatments were identified as having limited implementability because the plume core is located directly beneath the Environmental Restoration Disposal Facility disposal cells, a landfill used for the disposal of low-level radioactive, hazardous, and mixed wastes generated from Hanford cleanup activities. Further limitations in treatment technologies for radioiodine were due to the isotopic distribution of subsurface iodine. Data indicate that stable iodine (I- 127) concentrations are up to three orders of magnitude greater than I-129, limiting the effectiveness of potential technologies because they are not isotope-specific. Ex situ approaches also lacked the effectiveness and maturity required to treat I-129. Hence, the technology evaluation did not identify any technologies that needed treatability testing, driven by site and contaminant properties that hinder effectiveness and/or implementability of the technologies. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Selection of Vadose Zone Flow and Transport Properties with Gravel Fraction Corrections for the Hanford Site Composite Analysis and Cumulative Impact Evaluation

This environmental calculation file (ECF) is a compilation of hydrologic and radiological/chemical properties to be used for the updated Hanford Site Composite Analysis (CA) and Cumulative Impact Evaluation (CIE) vadose zone (VZ) modeling. The CA will provide an all-pathways dose projection to a hypothetical future member of the public from all planned low-level radioactive waste disposal facilities and potential contributions from all other projected end-state sources of radioactive material left at the Hanford Site following site closure. Its primary purpose is to support the decision-making process of the U.S. Department of Energy (DOE) under DOE O 435.1 Chg 1, Radioactive Waste Management, related to managing low-level waste disposal facilities at the Hanford Site. The CIE evaluates the effects of cleanup decisions regarding groundwater quality in the Hanford Site Central Plateau (DOE/RL-2018-69, Cumulative Impact Evaluation Technical Approach Document). Due to the complexity and large number of waste sites in source operable units (OUs), the computational tools used for the CIE must be capable of representing a range of site conditions and source terms in the VZ while also efficiently computing the impact that cleanup decisions have on the underlying aquifer. Waste-site proximity between and within source OUs has resulted in contaminants commingling in the vadose and saturated zones in complex ways. Plume commingling requires cleanup decisions to be evaluated considering the surrounding waste sites and existing groundwater contamination, therefore demonstrating the need to evaluate cumulative impacts from the VZ to groundwater.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Updates to a Preliminary Probabilistic Performance Assessment Model for Radiological and Chemical Contamination at the West Valley Site, New York - 20420

The New York State Energy Research and Development Authority (NYSERDA) is the owner of the Western New York Nuclear Service Center (WNYNSC), a 1,351-ha site located approximately 48 km south of Buffalo, New York. In 1962, Nuclear Fuel Services, Inc. (NFS) entered into agreements with the Atomic Energy Commission and New York State to construct the first commercial reprocessing plant of nuclear fuel in the United States at the WNYNSC. NFS built and operated the spent fuel reprocessing plant and waste disposal facilities, processing 640 Mg (640 metric tons) of spent nuclear fuel from 1966 to 1972 under an Atomic Energy Commission license. Nuclear fuel reprocessing operations halted in 1972 and never restarted, leaving behind radioactive and chemical wastes. The U.S. Department of Energy (DOE) was required to complete certain waste management activities under the West Valley Demonstration Project (WVDP) Act of 1980 including decommissioning of WVDP facilities. As collaborating agencies, NYSERDA and the DOE are tasked with making decisions about decommissioning and risk reduction for the West Valley Site. Neptune and Company, Inc. (Neptune) was contracted to develop a probabilistic performance assessment (PPA) model to assist the agencies in their decision making process for decommissioning the WVDP and WNYNSC. One important tool that is needed in order to inform the decision-making process is a science-based model of the West Valley Site that evaluates potential future consequences for human health and the environment. This forms the core of the spatial domain of the West Valley PPA Model. The PPA Model, developed using the GoldSim system modeling software, is a tool intended to provide support for decision making that evaluates uncertainty, in a manner that is transparent, defensible, and robust. The PPA Model includes contaminant transport and health effects components, and is organized around geographically-grouped contaminated facilities. These include the waste disposal areas licensed by the U.S. Nuclear Regulatory Commission and the State of New York, a waste tank farm for storage of high level radioactive waste resulting from reprocessing operations, and several areas contaminated with radioactive and chemical constituents. The PPA Model evaluates contaminant transport from these sources to points of exposure across the site and into receiving surface waters and sediments. Hypothetical people and wildlife could be exposed to contamination at these locations, and the effects of these exposures are evaluated. Contaminant transport processes to be evaluated in the PPA Model include groundwater and surface water transport, contaminant translocation by plants and animals, diffusion, and erosion. The evaluation of exposures to people in this preliminary model is limited to a resident farmer scenario, and ecological assessment is performed at the level of a screening analysis. The results of these preliminary evaluations inform future model developments. PPA Model results are subjected to sensitivity analysis in order to determine those pathways and parameters that are most significant in influencing the results. This information allows analysts and decision makers to focus on those aspects of Site behavior and processes. With this information, the decision makers can drive informed, defensible decisions regarding decommissioning of the Site. This paper includes an update of the information presented at WM2019 [1]. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Methods and system for siting advanced nuclear reactors and evaluating energy policy concerns

There is a growing sociopolitical desire to develop cleaner energy sources in the United States and maintain energy security. Regardless of politics, many coal-fired electric plants have already been shut down and many utilities are vowing to retire their current coal-fired assets within the next two decades. Replacement power assets require consideration of appropriate siting. A geographic information system (GIS)-based multicriteria decision analysis approach is useful to assist utility and energy companies, as well as policymakers, to evaluate potential areas for siting new plants in the contiguous United States. A GIS-based framework is simply a database of location information that allows for mapping, querying, modeling, and analyzing data based on location. The spatial output can be structured to be visual, allowing for easier analysis of location data. The need to site additional power assets, including renewable resources and clean power sources, such as nuclear, led to the development of the Oak Ridge Siting Analysis for power Generation Expansion (OR-SAGE) tool discussed in this paper. The tool takes inputs such as population growth, water availability, environmental indicators, and tectonic and geological hazards to provide an in-depth visual analysis for siting options. Energy companies and other stakeholders can use OR-SAGE to procure feedback quickly and effectively on land suitability based on technology specific inputs. Policymakers can use OR-SAGE to analyze the impacts of future energy technology decisions, while balancing competing resource use. Overall, this paper discusses the recent use of OR-SAGE for these purposes and plans for future development.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

An Evaluation of Advanced Tools for Distributed Wind Turbine Performance Estimation

We evaluate various classes of distributed wind turbine performance tools across two sites in the United States. The class of tools ranges from the simple mass conservation model to the coupled Reynolds-averaged Navier-Stokes model, all initiated by the WIND Toolkit data set. The resource estimation at the site is evaluated against measured data at the mast location. Taking a sample 100-kW wind turbine and constant losses, we evaluate Openwind, Continuum, and WindNinja tools and document annual energy production (AEP) and time-series statistics associated with the performance estimation of the wind turbine. Using a methodology that is consistent and unbiased across the three options currently available in the industry, we elaborate results at the two sample locations and discuss the probable sources of discrepancy in the AEP estimates. Two main sources of the discrepancy come from the input WIND Toolkit data and the spatial modeling techniques of the tools to capture atmospheric physics. The discussion includes additional values that these tools may bring into the energy assessment process to enhance the owners' confidence over the distributed wind power systems.

17 WIND ENERGY↗