SEARCH · Search NASA
Results for “slides”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Friction and contact resistance during sliding in vacuum of some-low-resistivity metals lubricated with sputtered molybdenum disulfide films
Friction and contact resistance during sliding in vacuum of low resistivity metals lubricated with sputtered molybdenum disulfide
Sliding friction of copper alloys in vacuum.
Sliding friction tests of Cu and Cu-Be alloy plates in contact with various alloy sliders in air and vacuum
Friction and contact resistance for low-speed gallium-lubricated sliding electrical contacts of beryllium in vacuum
Reducing friction and contact resistance of sliding electrical contacts of beryllium by gallium lubrication in vacuum
Friction and contact resistance for low speed gallium lubricated sliding electrical contacts of beryllium in vacuum.
Low speed Ga lubricated sliding electrical contacts of Be in vacuum, discussing Ga film role in friction and contact resistance
Sliding electrical contacts for unmanned scientific satellites
Sliding electrical contacts for unmanned scientific satellites, discussing Nimbus AVCS camera iris motors
Effect of surface films on deformation of zinc single-crystal surface during sliding
Influence of surface films on plastic deformation of zinc single crystals during sliding
Sliding-load history effects on the friction of MoS2 in vacuum
Sliding load history effects on friction of thin burnished films of molybdenum disulfide in vacuum
Evaluation techniques for the friction behavior of gold sliding contacts operating in high- purity environments
Gold sliding electric contacts friction behavior, studying adsorbed gas lubrication in ultrahigh purity environments
Effect of surface films on deformation of zinc single-crystal surface during sliding
Surface oxide, organic and lead film effects on friction and plastic deformation of Zn single crystal during sliding
Metallic transfer between metals in sliding contact examined by auger emission spectroscopy
Metallic transfer between polycrystalline metals in sliding contact was examined. Hemispherical riders of iron, nickel, and cobalt were slid on tungsten, tantalum, niobium, and molybdenum disks in ultrahigh vacuum. Auger emission spectroscopy was used to monitor the elemental composition of the disk surfaces. Iron, nickel, and cobalt transferred to tungsten, whereas only cobalt transferred to tantalum, niobium, and molybdenum. The results of this investigation are discussed in terms of the cohesive energy and strain hardening characteristics of the specimen materials.
Scanning electron microscope study of polytetrafluoroethylene sliding on aluminum single crystals
Friction experiments were conducted in air with polytetrafluoroethylene (PTFE) sliding on aluminum single crystals. Mechanical scoring of the crystals with (110) and (100) orientations was observed with a single pass of the PTFE slider. No scoring was observed on the (111). The degree of scoring of the crystals is related to the hardness, with the hardest surface (111) showing no damage and the softest surface (110) showing the most severe scoring. Scoring is caused by work-hardened pieces of aluminum which, as a consequence of the adhesion between PTFE and aluminum, were pulled out of the bulk and became embedded in the PTFE polymer.
Auger analysis of oxygen and sulfur interactions with various metals and the effect of sliding on these interactions
Various gases were adsorbed to copper, aluminum, and chromium surfaces. The gases included oxygen, hydrogen sulfide, methyl mercaptan, and sulfur dioxide. Chemisorption was conducted on static surfaces and during dynamic friction experiments. An Auger cyclindrical mirror analyzer was used to monitor surface films. The sulfur containing gases adsorbed readily to all surfaces. Exposures of as little as 0.000001 (torr)(sec) (1 langmuir) were sufficient to reduce friction. Sliding contact did not affect chemisorption of copper or aluminum but did affect chemisorption to chromium surfaces. Oxygen removed sulfur films from all surfaces at room temperature (23 C). Gaseous exposures were from 0.000001 to 0.01 (torr)(sec) (1 to 10,000 langmuirs).
Ball motion and sliding friction in an arched outer race ball bearing
The motion of the ball and sliding friction in an arched outer race ball bearing under thrust loads is determined. Fatigue life evaluations were made. The analysis is applied to a 150 millimeter bore ball bearing. The results indicated that for high speed-light load applications the arched bearing has significant improvement in fatigue life over that of a conventional bearing. An arching of 0.254 mm (0.01 in.) was found to be an optimal. For an arched bearing it was also found that a considerable amount of spinning occurs at the outer race contacts.
Automated single-slide staining system
Apparatus developed to Gram-stain single slides automatically is flexible enough to accommodate other types of staining procedures. Method frees operator and eliminates necessity for subjective evaluations as to length of staining or decolorizing time.
Ball motion and sliding friction in an arched outer-race ball bearing
The motion of the ball and sliding friction in an arched outer-race ball bearing under thrust load is analyzed. Fatigue life evaluations were made. The analysis is applied to a 150-millimeter-bore ball bearing. The results indicated that for high-speed light-load applications the arched bearing has significant improvement in fatigue life over that of a conventional bearing. An arching of 0.254 mm (0.01 in.) was found to be optimal. Also, for an arched bearing a considerable amount of spinning occurs at the outer-race contacts.
A thermal, thermoelastic, and wear simulation of a high-energy sliding contact problem
This paper describes an investigation of the sliding contact problem encountered in high-energy disk brakes. The analysis includes a simulation modeling, using the finite element method, of the thermoelastic instabilities that cause transient changes in contact to occur on the friction surface. In order to include the effect of wear of the concentrated contacts on the friction surface, a wear criterion is proposed that results in prediction of wear rates for disk brakes that are quite close to experimentally determined wear rates. The thermal analysis shows that the transient temperature distribution in a disk brake can be determined more accurately by use of this thermomechanical analysis than by a more conventional analysis that assumes constant contact conditions. It is also shown that lower, more desirable, temperatures in disk brakes can be attained by increasing the volume, the thermal conductivity, and especially, the heat capacity of the brake components.
Auger analysis of films formed on metals in sliding contact with halogenated polymers
The use of Auger electron spectroscopy (AES) to search for transferred polymer must contend with the fact that there has been no published work on Auger analysis of polymers. Since this is a new area for AES, the Auger spectra of polymers and of halogenated polymers in particular is discussed. It is shown that the Auger spectra of halogenated polymers have certain characteristics that permit an assessment of whether a polymeric transfer film has been established by sliding contact. The discussion is general and the concepts should be useful in considering the Auger analysis of any polymer. The polymers chosen for this study are the halogenated polymers polytetrafluoroethylene (PTFE), polyvinyl chloride (PVC), and polychlorotrifluorethylene (PCTFE).