Search NASA⌕ Search

SEARCH · Search NASA

Results for “so2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Rate constant for the reaction SO + BrO yields SO2 + Br

The rate of the radical-radical reaction SO + BrO yields SO2 + Br has been determined at 298 K in a discharge flow system near 1 torr pressure with detection of SO and BrO via collision-free sampling mass spectrometry. The rate constant was determined using two different methods: measuring the decay of SO radicals in the presence of an excess of BrO and measuring the decay of BrO radicals in excess SO. The results from the two methods are in reasonable agreement and the simple mean of the two values gives the recommended rate constant at 298 K, k = (5.7 + or - 2.0) x 10 to the -11th cu cm/s. This represents the first determination of this rate constant and it is consistent with a previously derived lower limit based on SO2 formation. Comparison is made with other radical-radical reactions involving SO or BrO. The reaction SO + BrO yields SO2 + Br is of interest for models of the upper atmosphere of the earth and provides a potential coupling between atmospheric sulfur and bromine chemistry.

Brunning, J.↗

Episodic vs. epochal release of SO2 on Mars

Erosion of the Martian surface by the flow of liquid water has apparently taken place at different times and locations on the planet. Many attempts were made to explain the valley networks by invoking a strong atmospheric CO2/H2O greenhouse early in the history of the planet. It was assumed that the large amounts of CO2 necessary to cause the greenhouse would have disappeared due to carbonate formation. Carbonates have yet to be positively identified. Volcanism has occurred throughout much of the history of Mars. Presumably gases such as SO2 were released along with CO2 and H2O. Estimates of amounts and rates with which SO2 were released into the Martian atmosphere, and how this would effect the global climate were made. Studies are continuing on the effects of SO2 and other volcanic gases on Martian climatic history.

Postawko, S. E.↗

SO and SO2 in mass-loss envelopes of red giants - Probes of nonequilibrium circumstellar chemistry and mass-loss rates

SO emission was searched for in one or more of four transitions toward 23 oxygen-rich red giant or supergiant stars and one S star, selected primarily on the basis of their nonmaser SiO emission. SO was detected in a total of 14 circumstellar envelopes, 13 of which are new detections. The circumstellar abundance of SO (and SO2) is significantly enhanced over the equilibrium value achieved in the photospheres of these stars. In general, the SO abundances are significantly larger than predicted by nonequilibrium circumstellar chemistry models. Sulfur cannot be significantly depleted onto circumstellar grains, and probably exists as H2S (and/or SH) in the inner regions of the envelopes. The SO rotational-level population in most circumstellar envelopes observed is characterized by excitation temperatures less than or approximately equal to 50 K. The circumstellar abundance of SO2 is comparable to, or larger than, that of SO, ruling out the 'large' value adopted for the unshielded photodissociation rate for SO2 in recent models.

Sahai, Raghvendra↗

SO2 on Venus: A final cross-calibration with Pioneer Venus

In our previous report, we noted that we had successfully completed all of the IUE observations which were proposed. A total of 7 Venus spectra were obtained. In the present reporting period, essentially all of the associated data reduction and analysis activities were completed, and Drs. Stern, Barker, and Na met to collaborate on data interpretation. The model atmosphere used in this analysis is similar to the one used in the analysis of the Pioneer Venus observations (Esposito, et al. 1979, 1988) and the previous IUE observations (Na, et al. 1990). In this model, sulfuric acid aerosols with a radius of about 1 micron are mixed uniformly with Rayleigh scattering gases throughout the cloud layer. There are two wavelength-independent absorbers. First, the aerosols are assumed to have a single scattering albedo of 0.98, and second a pure absorbing layer with an optical depth of 0.2 is added at an altitude of 75 mbar. The variable parameters in this model are the mixing ratios of SO2 at the cloud top (40 mbar level), and the scale height of SO2 at the same altitude. Model spectra were calculated using a radiative transfer code utilizing a Markov Chain method. Each model calculation takes into account the multiple scattering and the vertical inhomogeneity of the atmosphere. We reported those initial results at the 1992 meeting of the AAS Division of Planetary Sciences (Barker, Stern, and Na 1992) The important finding we have reached is that the 1991 IUE observations indicate that the long-term decline in Venus SO2 abundance has either halted or reversed. Our simultaneous groundbased measurements made on the McDonald Observatory 2.7 m corroborate this result. We are now preparing a paper describing these IUE results for publication in Icarus. With the IUE results reduced, we are also beginning a project to compare the 1991 IUE results to Pioneer Venus UV spectra made on the same dates.

Stern, S. Alan↗

Microwave Limb Sounder measurement of stratospheric SO2 from the Mt. Pinatubo volcano

The Microwave Limb Sounder (MLS) experiment on the Upper Atmosphere Research Satellite (UARS) began atmospheric measurements on September 19, 1991. Residual SO2 from the Pinatubo eruption was detected immediately after instrument activation. The SO2 was 1ocated in a tropical band with peak mixing ratios of about 15 ppbv near 26 km altitude. The observed decay of SO2 has provided an estimate of the OH concentration in the plume.

Read, W. G.↗

The use of TIMS data to estimate the SO2 concentrations of volcanic plumes: A case study at Mount Etna, Sicily

Thermal Infrared Multispectral Scanner (TIMS) data were acquired over Mount Etna, Sicily, on 29 July 1986. The volcanic activity at that time was characterized by the steady effusion of gas from the Bocca Nuova (BN), Chasm, and Southeast craters. The Northeast crater, quiet at the time of the TIMS overflight, was the site of Strombolian eruptive activity between 31 July and 24 Sep. 1986. In aerial photographs of the Etna summit region acquired during the TIMS overflight, the SO2-rich plume is visible due to the scattering of sunlight by the entrained aerosols. In the TIMS imagery, the plume is revealed by the strong absorption of SO2 between 8 and 9 microns. This absorption feature falls within the first three channels of TIMS, with the strongest absorption falling within Channel 2. Following decorrelation processing, the plume is visible in color-composites of TIMS channels 2, 3, and 5. To estimate the concentration of SO2 within the plume, the LOWTRAN 7 radiative transfer code was used to model the radiance spectra measured by TIMS.

Realmuto, Vincent J.↗

SO2 on Venus: A final cross-calibration with Pioneer Venus

The three observing programs under NASA Grant NAG5-1913 are described. They are NSOSS, VEOEB, and PCOEB. The scientific objectives for the IUE observation program NSOSS were to: make the first ever UV observations of a near-earth asteroid (4179 Toutatis), an irregular satellite of Jupiter (Himalia), and the Saturnian satellite Hyperion; obtain the first radially-dependent information on the UV color of Saturn's rings; gather the uncontaminated UV spectra of Iapetus's bright and dark hemispheres; and obtain a spectrum of Titania to initiate the comparitive study of UV photometric properties in Uranian system. The VEOEB program studied Venus SO2, an important indicator of key processes in the Venus atmosphere and perhaps Venus surface. Based on past Pioneer Venus and IUE observations, significant SO2 variations have been interpreted as indicating that the long term atmospheric SO2 abundance may be related to large, episodic injections from the surface or interior of Venus. The PCOEB program studied the Pluto-Charon system, for which evidence of a variable UV light curve has been presented. This program is to complete the coverage of that UV light curve, since only approximately 26% has been observed.

Source record↗

Detection of the SO2 atmosphere on Io with the Hubble Space Telescope

Observations of the trailing hemisphere of Io made with the Faint Object Spectrograph of the Hubble Space Telescope (HST) in March 1992 have resulted in the first detection of atmospheric SO2 absorption bands in the ultraviolet. These observations represent only the third positive means of detection of what is widely believed to be Io's primary atmospheric constituent. Below approximately 2130 A the geometric albedo of the satellite is dominated by SO2 gas absorption band signatures, which have been analyzed using models that include the effects of optical thickness, temperature, and spatial distribution. The disk-intergrated HST data cannot resolve the spatial distribution, but it is possible to define basic properties and set constraints on the atmosphere at the time of the observations. Hemispheric atmospheres with average column density N = 6 - 10 x 10(exp 15)/sq sm and T(gas) = 110 - 500 K fit the data, with preference for temperatures of approximately 200 - 250 K. Better fits are found as the atmosphere is spatially confined, with a limit of approximately 8% hemispheric areal coverage and N approximately equal to 3 x 10(exp 17)/sq cm with colder 110 - 250 K temepratures. A dense (N greater than or equal to 10(exp 16)/sq cm), localized component of SO2 gas, such as that possibly associated with active volcanoes, can generate the observed spectral constrast only when the atmosphere is cold (110 K) and an extended component such as Pele is included. The combination of a dense, localized atmosphere with a tenuous component (N less than 10(exp 16)/sq cm, either patchy or extended) also fits the data. In all cases the best fit models imply a disk-averaged column density larger than exospheric but approximately 10 - 30 times less than the previous upper limit from near-UV observations.

Ballester, G. E.↗

Middle UV to Near-IR Spectrum of Electron-Excited SO2

We investigated the electron impact-induced fluorescence spectrum of SO2 to provide excitation cross sections for modeling Io's mission spectrum and analyzing Cassini Imaging Science Subsystem observations. The electron-excited middle-ultraviolet visible optical near-infrared (VOIR) emission spectrum of SO2 gas was generated in the laboratory and studied from 2000 to 11,000 A at a resolution of (Delta)(lamda) approximately 2.5 A full width at half maximum (FWHM). The VOIR laboratory spectrum longward of 6000 A consists entirely of S I, II and O I, II multiplets for electron impact energies above approximately 15 eV. Between 2000 and 6000 A, we find previously identified molecular bands from both SO and SO2. This work represents a significant improvement in spectral resolution over our earlier work done at 18 A FWHM. From a measurement of the medium-resolution spectrum, we provide detailed 25- and 100-eV emission cross sections for spectral features from 2000 to 11,000 A . On the basis of these data, we suggest future ground-based and satellite telescopic observations in the VOIR that are of promise for understanding Io's atmosphere.

sulpher dioxide↗

Determination of the Rate Coefficients of the SO2 plus O plus M yields SO3 plus M Reaction

Rate coefficients of the title reaction R(sub 31) (SO2 +O+M yields SO3 +M) and R(sub 56) (SO2 + HO2 yields SO3 +OH), important in the conversion of S(IV) to S(VI),were obtained at T =970-1150 K and rho (sub ave) = 16.2 micro mol/cubic cm behind reflected shock waves by a perturbation method. Shock-heated H2/ O2/Ar mixtures were perturbed by adding small amounts of SO2 (1%, 2%, and 3%) and the OH temporal profiles were then measured using laser absorption spectroscopy. Reaction rate coefficients were elucidated by matching the characteristic reaction times acquired from the individual experimental absorption profiles via simultaneous optimization of k(sub 31) and k(sub 56) values in the reaction modeling (for satisfactory matches to the observed characteristic times, it was necessary to take into account R(sub 56)). In the experimental conditions of this study, R(sub 31) is in the low-pressure limit. The rate coefficient expressions fitted using the combined data of this study and the previous experimental results are k(sub 31,0)/[Ar] = 2.9 10(exp 35) T(exp ?6.0) exp(?4780 K/T ) + 6.1 10(exp 24) T(exp ?3.0) exp(?1980 K/T ) cm(sup 6) mol(exp ?2)/ s at T = 300-2500 K; k(sub 56) = 1.36 10(exp 11) exp(?3420 K/T ) cm(exp 3)/mol/s at T = 970-1150 K. Computer simulations of typical aircraft engine environments, using the reaction mechanism with the above k(sub 31,0) and k(sub 56) expressions, gave the maximum S(IV) to S(VI) conversion yield of ca. 3.5% and 2.5% for the constant density and constant pressure flow condition, respectively. Moreover, maximum conversions occur at rather higher temperatures (?1200 K) than that where the maximum k(sub 31,0) value is located (approximately 800 K). This is because the conversion yield is dependent upon not only the k(sup 31,0) and k(sup 56) values (production flux) but also the availability of H, O, and HO2 in the system (consumption flux).

Hwang, S. M.↗

Regional and Global Climate Response to Anthropogenic SO2 Emissions from China in Three Climate Models

We use the HadGEM3-GA4, CESM1, and GISS ModelE2 climate models to investigate the global and regional aerosol burden, radiative flux, and surface temperature responses to removing anthropogenic sulfur dioxide (SO2) emissions from China. We find that the models differ by up to a factor of 6 in the simulated change in aerosol optical depth (AOD) and shortwave radiative flux over China that results from reduced sulfate aerosol, leading to a large range of magnitudes in the regional and global temperature responses. Two of the three models simulate a near-ubiquitous hemispheric warming due to the regional SO2 removal, with similarities in the local and remote pattern of response, but overall with a substantially different magnitude. The third model simulates almost no significant temperature response. We attribute the discrepancies in the response to a combination of substantial differences in the chemical conversion of SO2 to sulfate, translation of sulfate mass into AOD, cloud radiative interactions, and differences in the radiative forcing efficiency of sulfate aerosol in the models. The model with the strongest response (HadGEM3-GA4) compares best with observations of AOD regionally, however the other two models compare similarly (albeit poorly) and still disagree substantially in their simulated climate response, indicating that total AOD observations are far from sufficient to determine which model response is more plausible. Our results highlight that there remains a large uncertainty in the representation of both aerosol chemistry as well as direct and indirect aerosol radiative effects in current climate models, and reinforces that caution must be applied when interpreting the results of modelling studies of aerosol influences on climate. Model studies that implicate aerosols in climate responses should ideally explore a range of radiative forcing strengths representative of this uncertainty, in addition to thoroughly evaluating the models used against observations.

sulfates↗

Computing Highly Accurate Spectroscopic Line Lists for Characterization of Planetary Atmospheres: CO2 and SO2 Line Lists Needed for Modeling Venus

Over the last decade, it has become apparent that the most effective approach for determining highly accurate rotational and rovibrational line lists for molecules of interest in planetary atmospheres and other astrophysical environments is through a combination of highresolution laboratory experiments coupled with state-of-the art ab initio quantum chemistry methods. The approach involves computing the most accurate potential energy surface (PES) possible using state-of-the art electronic structure methods, followed by computing rotational and rovibrational energy levels using an exact variational method to solve the nuclear Schrödinger equation. Then, reliable experimental data from high-resolution experiments is used to refine the ab initio PES in order to improve the accuracy of the computed energy levels and transition energies. From the refinement step, we have been able to achieve an accuracy of approximately 0.015 cm-1 for rovibrational transition energies, and even better for purely rotational transitions. This combined "experiment / theory" approach allows for determination of essentially a complete line list, with hundreds of millions of transitions, and having the transition energies and intensities be highly accurate. Our group has successfully applied this approach to determine highly accurate line lists for NH3, CO2 and isotopologues, and SO2 and isotopologues. Here I will report our latest results for CO2 and SO2 including all isotopologues. Comparisons to the available data in HITRAN2012 and other available databases will be shown, though we note that our line lists for SO2 are significantly more complete than any other databases. Since it is important to span a large temperature range in order to model the spectral signature of Venus as well as exoplanets, we will demonstrate how the spectra change on going from low temperatures (100 K) to higher temperatures (500 K to 1500 K).

potential energy surface (PES)5405 PLANETARY SCIEN↗

A Modeling and Simulation Study for the GeoXO Atmospheric Composition Instrument (ACX): System Level SO2 and O3 Retrieval Performance as a Function of SNR

NOAA’s Geostationary Extended Observations (GeoXO) program is planning to include a hyperspectral UV/visible atmospheric composition instrument in geostationary orbit slated for operations by the early 2030s. Trace gas retrievals provide critical information about our Earth’s system as it relates to both natural and anthropogenic activity. This work focused on the impacts of the signal-to-noise ratio (SNR) on the retrieval uncertainty of SO2 and O3. An end-to-end physics-based imaging system and scene modeling and simulation framework was developed to assess instrument performance considerations in support of the planned GeoXO atmospheric composition instrument (ACX). The framework is composed of three primary components: 1) simulated at-sensor radiance via radiative transfer models of a known atmospheric composition, 2) a noise model driven by previous and planned sensor specifications, and 3) a physical retrieval algorithm. In this analysis, the tropospheric concentrations of SO2 and O3 in the atmospheric column were varied in the boundary layer (0-3 km) and at an elevation of 5 km with a thickness of 1-2 km; the uncertainty in retrieval was studied for various SNR levels for multiple viewing geometries and solar zenith angles. This effort supports the development of the GeoXO ACX instrument by providing a simulated ACX performance assessment of the system-level retrieval performance as a function of SNR, particularly with respect to the wavelength range of interest (approximately 305 – 340 nm) for SO2 and O3 trace gas retrievals.

Monica Cook↗

Materials Data on P4(SO2)3 by Materials Project

P4(SO2)3 is beta Np structured and crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of four P4(SO2)3 clusters. there are four inequivalent P+4.50+ sites. In the first P+4.50+ site, P+4.50+ is bonded to one S2- and three O2- atoms to form distorted corner-sharing PSO3 tetrahedra. The P–S bond length is 1.88 Å. There is one shorter (1.62 Å) and two longer (1.64 Å) P–O bond length. In the second P+4.50+ site, P+4.50+ is bonded to one S2- and three O2- atoms to form distorted corner-sharing PSO3 tetrahedra. The P–S bond length is 1.88 Å. There is one shorter (1.62 Å) and two longer (1.64 Å) P–O bond length. In the third P+4.50+ site, P+4.50+ is bonded in a distorted trigonal non-coplanar geometry to three O2- atoms. All P–O bond lengths are 1.68 Å. In the fourth P+4.50+ site, P+4.50+ is bonded to one S2- and three O2- atoms to form distorted corner-sharing PSO3 tetrahedra. The P–S bond length is 1.88 Å. There is one shorter (1.62 Å) and two longer (1.64 Å) P–O bond length. There are three inequivalent S2- sites. In the first S2- site, S2- is bonded in a single-bond geometry to one P+4.50+ atom. In the second S2- site, S2- is bonded in a single-bond geometry to one P+4.50+ atom. In the third S2- site, S2- is bonded in a single-bond geometry to one P+4.50+ atom. There are six inequivalent O2- sites. In the first O2- site, O2- is bonded in a bent 120 degrees geometry to two P+4.50+ atoms. In the second O2- site, O2- is bonded in a bent 120 degrees geometry to two P+4.50+ atoms. In the third O2- site, O2- is bonded in a bent 120 degrees geometry to two P+4.50+ atoms. In the fourth O2- site, O2- is bonded in a bent 120 degrees geometry to two P+4.50+ atoms. In the fifth O2- site, O2- is bonded in a bent 120 degrees geometry to two P+4.50+ atoms. In the sixth O2- site, O2- is bonded in a bent 120 degrees geometry to two P+4.50+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on Sn(SO2)2 by Materials Project

Sn(SO2)2 crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of two Sn(SO2)2 clusters. Sn4+ is bonded in a 4-coordinate geometry to four O2- atoms. There are a spread of Sn–O bond distances ranging from 2.28–2.33 Å. There are two inequivalent S2+ sites. In the first S2+ site, S2+ is bonded in a water-like geometry to two O2- atoms. Both S–O bond lengths are 1.53 Å. In the second S2+ site, S2+ is bonded in a water-like geometry to two O2- atoms. Both S–O bond lengths are 1.53 Å. There are four inequivalent O2- sites. In the first O2- site, O2- is bonded in a 2-coordinate geometry to one Sn4+ and one S2+ atom. In the second O2- site, O2- is bonded in a 1-coordinate geometry to one Sn4+ and one S2+ atom. In the third O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one Sn4+ and one S2+ atom. In the fourth O2- site, O2- is bonded in a 2-coordinate geometry to one Sn4+ and one S2+ atom.

36 MATERIALS SCIENCE↗

Materials Data on Na3PH16(SO2)4 by Materials Project

Na3PH16(SO2)4 crystallizes in the monoclinic P2_1/c space group. The structure is two-dimensional and consists of two Na3PH16(SO2)4 sheets oriented in the (0, 1, 0) direction. there are four inequivalent Na1+ sites. In the first Na1+ site, Na1+ is bonded in a distorted square co-planar geometry to two equivalent S2- and four O2- atoms. Both Na–S bond lengths are 3.12 Å. There are two shorter (2.35 Å) and two longer (2.49 Å) Na–O bond lengths. In the second Na1+ site, Na1+ is bonded to two equivalent S2- and four O2- atoms to form distorted NaS2O4 octahedra that share corners with two equivalent PS4 tetrahedra and edges with two equivalent NaO6 octahedra. Both Na–S bond lengths are 2.89 Å. There are two shorter (2.37 Å) and two longer (2.43 Å) Na–O bond lengths. In the third Na1+ site, Na1+ is bonded in a 5-coordinate geometry to one S2- and five O2- atoms. The Na–S bond length is 3.17 Å. There are a spread of Na–O bond distances ranging from 2.34–2.51 Å. In the fourth Na1+ site, Na1+ is bonded to six O2- atoms to form edge-sharing NaO6 octahedra. There are a spread of Na–O bond distances ranging from 2.42–2.49 Å. P5+ is bonded to four S2- atoms to form PS4 tetrahedra that share a cornercorner with one NaS2O4 octahedra. The corner-sharing octahedral tilt angles are 67°. There are a spread of P–S bond distances ranging from 2.04–2.08 Å. There are sixteen inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the second H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the third H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the fourth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the fifth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 1.00 Å. In the sixth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.97 Å. In the seventh H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the eighth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 1.00 Å. In the ninth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the tenth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the eleventh H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the twelfth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the thirteenth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the fourteenth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the fifteenth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the sixteenth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. There are four inequivalent S2- sites. In the first S2- site, S2- is bonded in a distorted single-bond geometry to one Na1+ and one P5+ atom. In the second S2- site, S2- is bonded in a bent 120 degrees geometry to one Na1+ and one P5+ atom. In the third S2- site, S2- is bonded in a distorted bent 120 degrees geometry to one Na1+ and one P5+ atom. In the fourth S2- site, S2- is bonded in a single-bond geometry to one P5+ atom. There are eight inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted water-like geometry to two Na1+ and two H1+ atoms. In the second O2- site, O2- is bonded in a distorted water-like geometry to two Na1+ and two H1+ atoms. In the third O2- site, O2- is bonded in a distorted water-like geometry to two Na1+ and two H1+ atoms. In the fourth O2- site, O2- is bonded in a distorted water-like geometry to two Na1+ and two H1+ atoms. In the fifth O2- site, O2- is bonded in a distorted water-like geometry to two equivalent Na1+ and two H1+ atoms. In the sixth O2- site, O2- is bonded in a distorted water-like geometry to two Na1+ and two H1+ atoms. In the seventh O2- site, O2- is bonded in a distorted water-like geometry to one Na1+ and two H1+ atoms. In the eighth O2- site, O2- is bonded in a distorted water-like geometry to two equivalent Na1+ and two H1+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on Na3AsH16(SO2)4 by Materials Project

Na3AsH16(SO2)4 crystallizes in the monoclinic P2_1/c space group. The structure is two-dimensional and consists of two Na3AsH16(SO2)4 sheets oriented in the (0, 1, 0) direction. there are four inequivalent Na1+ sites. In the first Na1+ site, Na1+ is bonded in a distorted square co-planar geometry to two equivalent S2- and four O2- atoms. Both Na–S bond lengths are 3.12 Å. There are two shorter (2.35 Å) and two longer (2.47 Å) Na–O bond lengths. In the second Na1+ site, Na1+ is bonded to two equivalent S2- and four O2- atoms to form distorted NaS2O4 octahedra that share corners with two equivalent AsS4 tetrahedra and edges with two equivalent NaO6 octahedra. Both Na–S bond lengths are 2.88 Å. There are two shorter (2.37 Å) and two longer (2.42 Å) Na–O bond lengths. In the third Na1+ site, Na1+ is bonded in a 6-coordinate geometry to one S2- and five O2- atoms. The Na–S bond length is 3.11 Å. There are a spread of Na–O bond distances ranging from 2.35–2.52 Å. In the fourth Na1+ site, Na1+ is bonded to six O2- atoms to form edge-sharing NaO6 octahedra. There are a spread of Na–O bond distances ranging from 2.41–2.50 Å. As5+ is bonded to four S2- atoms to form AsS4 tetrahedra that share a cornercorner with one NaS2O4 octahedra. The corner-sharing octahedral tilt angles are 69°. There are a spread of As–S bond distances ranging from 2.17–2.21 Å. There are sixteen inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the second H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the third H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the fourth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the fifth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the sixth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the seventh H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the eighth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the ninth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the tenth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the eleventh H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the twelfth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the thirteenth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the fourteenth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the fifteenth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the sixteenth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. There are four inequivalent S2- sites. In the first S2- site, S2- is bonded in a distorted water-like geometry to one Na1+ and one As5+ atom. In the second S2- site, S2- is bonded in a water-like geometry to one Na1+ and one As5+ atom. In the third S2- site, S2- is bonded in a distorted bent 120 degrees geometry to one Na1+ and one As5+ atom. In the fourth S2- site, S2- is bonded in a single-bond geometry to one As5+ atom. There are eight inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted water-like geometry to two Na1+ and two H1+ atoms. In the second O2- site, O2- is bonded in a distorted water-like geometry to two Na1+ and two H1+ atoms. In the third O2- site, O2- is bonded in a distorted water-like geometry to two Na1+ and two H1+ atoms. In the fourth O2- site, O2- is bonded in a distorted water-like geometry to two Na1+ and two H1+ atoms. In the fifth O2- site, O2- is bonded in a distorted water-like geometry to two equivalent Na1+ and two H1+ atoms. In the sixth O2- site, O2- is bonded in a distorted water-like geometry to two Na1+ and two H1+ atoms. In the seventh O2- site, O2- is bonded in a distorted water-like geometry to one Na1+ and two H1+ atoms. In the eighth O2- site, O2- is bonded in a distorted water-like geometry to two equivalent Na1+ and two H1+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on Ba(SO2)2 by Materials Project

Ba(SO2)2 crystallizes in the orthorhombic Pbcn space group. The structure is two-dimensional and consists of two Ba(SO2)2 sheets oriented in the (0, 0, 1) direction. Ba2+ is bonded in a 5-coordinate geometry to eight O2- atoms. There are a spread of Ba–O bond distances ranging from 2.59–3.37 Å. There are two inequivalent S3+ sites. In the first S3+ site, S3+ is bonded in a single-bond geometry to one O2- atom. The S–O bond length is 1.55 Å. In the second S3+ site, S3+ is bonded in a trigonal non-coplanar geometry to three O2- atoms. There is two shorter (1.49 Å) and one longer (1.50 Å) S–O bond length. There are four inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted single-bond geometry to two equivalent Ba2+ and one S3+ atom. In the second O2- site, O2- is bonded in a distorted single-bond geometry to two equivalent Ba2+ and one S3+ atom. In the third O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one Ba2+ and one S3+ atom. In the fourth O2- site, O2- is bonded in a distorted single-bond geometry to three equivalent Ba2+ and one S3+ atom.

36 MATERIALS SCIENCE↗